zone transfer - free site

10 More Discussions You Might Find Interesting

1. IP Networking

IPSec Openswan Site to Site VPN - Big Pain

Hi @all, I try to connect 2 LANs with IPSec/Openswan LAN 1: 192.168.0.0/24 LAN 2: 192.168.1.0/24 This is my Config: conn HomeVPN # # Left security gateway, subnet behind it, nexthop toward right. left=192.168.1.29 ...

2. IP Networking

Does cisco 1921 router support site to site VPNs using IPSec?

Q: "Does Cisco 1921 router support,, act as an endpoint for, site to site VPNs using IPSec? If so, how many? " A: If you get the Cisco 1921/k9 with the security services bundle then it will have built in security features. Cisco, typically includes IP Sec tunnels I believe as part of that...

3. IP Networking

How to establish site to site vpn - Linux machine and cisco asa?

Hi, I am trying to establish vpn between my linux server and cisco asa at client side. I installed openswan on my cent os. Linux Server eth0 - 182.2.29.10 Gateway - 182.2.29.1 eth1 - 192.9.200.75 I have simple IPtables Like WAN="eth0" LAN="eth1"

4. Solaris

DNS zone transfer Problem.

Hi All , I have 2 DNS servers (BIND 9.6.1 -Solaris 10) .Its configured as master ,slave serves .Now i am recieving error messages related to zone transfer in both the servers as mentioned below . Primar Server named: client x.x.x.x#40825: transfer of './IN': sending zone data: ran...

5. Solaris

Zone failes to boot due to mount issue, dir exists in zone.

I have two physical servers, with zones that mount local storage. We were using "raw device" in the zonecfg to point to a metadevice on the global zone (it was not mounted in the global zone at any point). It failed to mount on every boot because the directory existed in the zone. I...

6. Solaris

Memory usage, free and used, using sar, top and vmstat in Solaris zone/container

Hi all, I have a server running an Oracle database that is part of a Solaris M5000 container. Presumably this is referred to as a zone within a cluster, not sure if I get the terminology right. Anyway, a third-party manages the zone and unfortunately is not "helpful/friendly" to assist me on...

7. Solaris

How to obtain DNS Zone transfer settings on Sun OS 5.7

I have an old Sun SparcStation 5 that is running Sun OS 5.7, I'm not sure which commands would allow me to obtain the DNS zone transfer settings? 1.) I'm needing to know if the zone transfers are enabled. 2.) If it is enabled, does it transfer to specific servers 3.) If so, how do I go about...

8. Solaris

Bind zone transfer recategorises zone file?

Hi, I have a primary/slave Bind 9 setup running on a Solaris 10 platform. Everything is hunky dorey, except for when I make a zone file change and up the serial the file that is transferred to the slave looses all its comments, and the entries are place in alphabetical order. I administer many...

9. Windows & DOS: Issues & Discussions

I need a free firewall besides zone alarm for XP PRO

Please help. Reply and tell me if you find one. Lots of thanks! Computek

10. IP Networking

bind zone transfer?

Hi all, How to deny any zone transfer out of my host??? bind 8.2.3 Thank you all, Regards :D

LEARN ABOUT REDHAT

nbp_name

NBP_NAME(3)						     Library Functions Manual						       NBP_NAME(3)

NAME

       nbp_name - NBP name parsing

SYNOPSIS

       nbp_name( name, obj, type, zone )
       char *name, **obj, **type, **zone;

DESCRIPTION

       nbp_name()  parses user supplied names into their component object, type, and zone.  obj, type, and zone should be passed by reference, and
       should point to the caller's default values.  nbp_name() will change  the  pointers  to	the  parsed-out  values.   name  is  of  the  form
       object:type@zone,  where  each  of  object, :type, and @zone replace obj, type, and zone, respectively.	type must be proceeded by `:', and
       zone must be preceded by `@'.

EXAMPLE

       The argument of afpd(8)'s -n option is parsed with nbp_name().  The default value of obj is the first component of the  machine's  hostname
       (as  returned  by gethostbyname(3)).  The default value of type is ``AFPServer'', and of zone is ``*'', the default zone.  To cause afpd to
       register itself in some zone other than the default, one would invoke it as

	      afpd -n @some-other-zone

       obj and type would retain their default values.

BUGS

       obj, type, and zone return pointers into static area which may be over-written on each call.

netatalk 1.3							    12 Jan 1994 						       NBP_NAME(3)

Shell Programming and Scripting