S-307: Multiple Vulnerabilities in Cisco PIX and Cisco ASA


 
Thread Tools Search this Thread
Special Forums Cybersecurity Security Advisories (RSS) S-307: Multiple Vulnerabilities in Cisco PIX and Cisco ASA
# 1  
Old 06-06-2008
S-307: Multiple Vulnerabilities in Cisco PIX and Cisco ASA

Multiple vulnerabilities exist in the Cisco ASA 5500 Series Adaptive Security Appliances and Cisco PIX Security Appliances. The risk is MEDIUM. Successful exploitation of the vulnerabilities may cause a reload of the affected device, repeated exploitation could result in a sustained Denial-of-Service (DoS) condition, and may allow an attacker to bypass control-plane ACLs and successfully send malicious traffic to the device.


More...
Login or Register to Ask a Question

Previous Thread | Next Thread

4 More Discussions You Might Find Interesting

1. IP Networking

Openswan with Cisco ASA

Hi all, I need this as soon as possible to solve it or at least to find out what is the problem. I have configured IPSec tunnels with Openswan and Cisco ASA, i have established a connection and the ping was fine, but after some time there is request time out from both sites. I don't have ASA... (0 Replies)
Discussion started by: ivancd
0 Replies

2. IP Networking

Cisco 3750 Switch ASA VPN Routing

Hi,I want connect my ASA 5510 firewall to a 3750 switch with RIP routing. Unfortunately,I am having issues passing the VPN subnet through rip to the 3750.I don't understand how the routing table is populated on the ASA. Any suggestions? (0 Replies)
Discussion started by: Ayaerlee
0 Replies

3. IP Networking

How to establish site to site vpn - Linux machine and cisco asa?

Hi, I am trying to establish vpn between my linux server and cisco asa at client side. I installed openswan on my cent os. Linux Server eth0 - 182.2.29.10 Gateway - 182.2.29.1 eth1 - 192.9.200.75 I have simple IPtables Like WAN="eth0" LAN="eth1" (0 Replies)
Discussion started by: ashokvpp
0 Replies

4. Solaris

Connecting Solaris 10 to Cisco PIX with IPsec tunnel

I having problem connecting to a Cisco PIX Log from IKE # /usr/lib/inet/in.iked -f /etc/inet/ike/config -d Jan 16 00:40:57: 2012 (+0800) *** in.iked started *** Jan 16 00:40:57: Loading configuration... Jan 16 00:40:57: Checking lifetimes in "nullrule" Jan 16 00:40:57: Using default value... (0 Replies)
Discussion started by: conandor
0 Replies
Login or Register to Ask a Question
Net::CLI::Interact::Manual::Phrasebook(3pm)		User Contributed Perl Documentation	       Net::CLI::Interact::Manual::Phrasebook(3pm)

NAME
Net::CLI::Interact::Manual::Phrasebook - List of Supported CLIs INTRODUCTION
The bundled phrasebook includes support for a variety of network device CLIs. Many were contributed by users of the module. If you set up a new CLI dictionary, please consider contributing it back! The phrasebook specification is given in Net::CLI::Interact::Phrasebook. For each supported CLI, there is a name which must be passed in the "personality" option to Net::CLI::Interact's "new()" method. After that, you can call the included Macros, and the module will use the included Prompt to match the current state of the CLI. More information is available in the Tutorial and Cookbook. Below is a list of all current bundled CLI dictionaries. Each lists its name, the available Prompts, Macros and Continuations, and from which other CLI dictionaries it inherits. IOS # Cisco IOS CatOS # for older, pre-IOS Cisco devices PIXOS # for PIX OS-based devices PIXOS7 # Slightly different commands from other PIXOS versions FWSM # currently the same as 'PIXOS' FWSM3 # for FWSM Release 3.x devices (slightly different to FWSM 2.x) JunOS # Juniper JUNOS support HP # HP support Nortel # Nortel support ExtremeOS # Extreme Networks support Foundry # Foundry/Brocade device support PERSONALITIES
Cisco This personality goes by the name of "cisco" and provides a basis for many other CLI dictionaries. Prompts are "basic", "privileged", "configure", "user", and "pass". Macros are "begin_privileged", "end_privileged", "begin_configure", "end_configure", and "disconnect". CatOS This personality goes by the name of "catos" and inherits from the "cisco" dictionary. Additionally it provides the "privileged" Prompt. Additionally it also provides the "paging" Macro to set the terminal page size. ExtremeOS This personality goes by the name of "extremeos" and inherits from the "cisco" dictionary. Additional Prompts are "basic", "privileged", "configure", "user", and "pass". Additional Macros are "begin_privileged", "end_privileged", and "disconnect". Foundry / Brocade This personality goes by the name of "foundry" and inherits from the "cisco" dictionary. Before connecting to the device you probably want to set the output separator to be: $nci->transport->ors(" "); For users of Net::Appliance::Session this should be: $session_obj->nci->transport->ors(" "); IOS This personality goes by the name of "ios" and inherits from the "cisco" dictionary. Additionally it provides the "paging" Macro to set the terminal page size. HP This personality goes by the name of "hp" and inherits from the "cisco" dictionary. Additionally it provides the "basic" and "user" Prompts. JunOS This personality goes by the name of "junos" and inherits from the "cisco" dictionary. Additionally it provides the "privileged", "configure", and "user" Prompts. Additionally it also provides the "begin_configure" and "paging" Macros. Nortel This personality goes by the name of "nortel" and inherits from the "cisco" dictionary. Additionally it provides the "user" Prompt. PIXOS This personality goes by the name of "pixos" and inherits from the "cisco" dictionary. Additionally it provides the "paging" Macro to set the terminal page size. It can be used in its own right for Cisco PIX firewalls, but is also used as a base for other dictionaries. PIXOS 7 This personality goes by the name of "pixos7" and inherits from the "pixos" dictionary. Additionally it provides the "paging" Macro to set the terminal page size. FWSM This personality goes by the name of "fwsm" and inherits from the "pixos" dictionary. It provides no further functionality, as Cisco FWSM software version 1 and 2 was the same as the PIX OS. FWSM 3 This personality goes by the name of "fwsm3" and inherits from the "pixos" dictionary. Additionally it provides the "paging" Macro to set the terminal page size. perl v5.14.2 2012-06-12 Net::CLI::Interact::Manual::Phrasebook(3pm)