|
|
TA08-100A: Adobe Flash updates for Multiple Vulnerabilities
|
|
FTL_CS(4) Kernel Interfaces Manual FTL_CS(4) NAME
ftl_cs - Flash Translation Layer driver for PCMCIA memory cards SYNOPSIS
insmod ftl_cs.o [pc_debug=n] [major_dev=n] DESCRIPTION
Flash memory devices typically need to be erased before they are written, and most flash devices can only be erased on large block bound- aries like 64K or 128K. The Flash Translation Layer driver, ftl_cs, implements a sort of virtual sector-addressable block device that hides the details of erase operations. Using the FTL driver, a flash memory card can be treated as an ordinary block device. The ftl_cs driver allocates a major device number when it is loaded. Minor device numbers have a bitwise layout of 'dddrrppp'. 'ddd' is the device number, with one card counting as one device. 'rr' is the common-memory region number, generally 0. And 'ppp' selects a logi- cal partition within the FTL region. The default configuration script for FTL devices will create a block device with the name of the form '/dev/ftl{d}c{r}', where '{d}' is the device number and '{r}' is the region number, that spans the entire FTL region. It also creates devices '/dev/ftl{d}c{r}p[1-4]' pointing to partitions 1 through 4 within this FTL region. An FTL region must be formatted before use. The formatting utility, ftl_format, needs to write to the corresponding raw memory device rather than the FTL device interface. PARAMETERS
pc_debug=n Selects the PCMCIA debugging level. This parameter is only available if the module is compiled with debugging enabled. A non-zero value enables debugging. major_dev=n Selects the major device number to allocate for FTL devices. The default is to pick any available major number. AUTHOR
David Hinds - dahinds@users.sourceforge.net SEE ALSO
ftl_format(8), cardmgr(8), memory_cs(4), pcmcia(5). pcmcia-cs 2000/06/12 21:24:47 FTL_CS(4)
