Search Results

i found out that there is the command brctl. it was in another directory which was not in the path. the output is the following.


# ./brctl show
bridge name bridge id STP...

ok. so i have to do trial and error to achieve a solution. thanks for your help.

i ll give feedback if any solution will work.

yes you are right. but if i leave the configuration like i have now. at least the sip-account works on reboot. that is because the lan1 port is configured to be a fake external modem with dhcp. this...

the device has a read-only system. so after reboot everything is as before.

when plug the lan-cable to my network switch to the lan2 (br0) then it works like a switch and auto-configures the...

i have a few problems. my ip knowledge is limited. and i only have a busybox linux on the horstbox-router.

so is it possible to "bridge" the interfaces per command line ? does this make sense ?

route

Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.2.0 * 255.255.255.0 U 0 0 0 br0...

this is the horstbox

http://www.conrad.de/medias/global/ce/9000_9999/9200/9230/9234/923438_ZB_02_FB.EPS_1000.jpg

there are 4 blue ethernet ports. i am sorry but i have no deep knowledge in ip. ...

hi folks,

i have a horstbox-router with the following configuration.

it has 4 ethernet ports from wich one (wan0) is configured as an external modem via dhcp. at this port/interface(wan0) it...