Problem with sco unix 5.0.5 and copy disk

10 More Discussions You Might Find Interesting

1. SCO

Sco unix 5.0 copy file to pen drive

I have a server unix Sco 5.0 and copy some backup files to flopy drive using command "Tar", but i like copy this files to pen drive, is possible ? my know about Sco is less. Tks

2. SCO

Help with disk size in sco unix

when i try to find the disk size in a sco unix machine i am not quite sure about the commands df and df -k is there any other command to see what hardware raid it is built in and the total disk size any command similar to fdisk

3. UNIX for Dummies Questions & Answers

Problem with FTP o n Unix SCO

my problem is like this while ftping locally it works, but when users from WAN try the ftp services it doesnt comes the message it displays is as follows "connection closed by remote host " please help Thanks

4. Filesystems, Disks and Memory

Unix Sco Open Server, Windows Computers Problem Access Unix Shared Files Help!!!!!

Hello Moto I hope someone can help We's here at work, have a unix box with sco openserver 5 on it, so it has a nice gui interface.. and also a fair few windows computers.. a system admin guy b4 me, has set up a user called neil, which can, when u try to access the unix box using windows...

5. UNIX for Dummies Questions & Answers

SCO Unix - Disk Space

Hi, I am using SCO Unix 3.12 and Informix database. When we tried to use "du -a" command to check disk space, it showed: 342122 ./usr 30092 ./etc 6244 ./dev 4778 ./bin 2674 ./tcb 1234 ./lost+found 698 ./lib 532 ./shlib 46 ./tmp 6 ./messages 4 ./opt 4 ./var 2 ./mnt 2 ./install...

6. SCO

sco unix v/386 boot disk

anyone know where I can download or get a boot disk for sco unix v/386? I have an old PC running sco unix v/386 3.2. I dont have an install or boot disk. I need to reset the root password. I have looked all over the internet and cannot find it anywhere. any help would be greatly appreciated....

7. SCO

adding hard disk from SCO OpSer in SCO 5.06

Hi! Sorry, but I am'not spesialist in SCO OpenServer. I need to add hard disk from SCO Open Server ( "a") in my SCO OpenServer 5.6. I need data from "a". When I added, I see only swap disk, and didn't see root file system. I need to add IDE and SCSI Please, help me. How right to add disk?...

8. Shell Programming and Scripting

IInd Hard Disk Mounting Problem on 1st HDD On SCO UNIX Open Server

Hi Engg. ! :mad: I have a harddisk on which SCO UNIX Open Server was installed. There was some data (in .dbf format) on it. Present condition of HDD is that it is not booting. Now I want to mount this HDD through other HDD on which SCO UNIX Open Server is installed by attaching...

9. SCO

inetd problem in Unix Sco

Hi, I cannot remote login into my unix sco server, only at the box itself, when I write root to login then enter, it immediately logs in without asking me the password :confused: , at the prompt it gives me this error : inetd:system defaults databse couldn't be allocated due to : cannot...

10. UNIX Desktop Questions & Answers

download copy of UNIX, SOLARIS, SCO, anything?

Hi All, I'm a UNIX Newbie, yes, I hate to say it. I'm decent enough though on LINUX box. But of course, it's not the same! Does anyone know where I can download a copy of the UNIX network operating system, that I can install on one of my boxes? I'd very much appreciate all suggestions. ...

LEARN ABOUT LINUX

hd

HD(4)							     Linux Programmer's Manual							     HD(4)

NAME

       hd - MFM/IDE hard disk devices

DESCRIPTION

       The  hd*  devices  are block devices to access MFM/IDE hard disk drives in raw mode.  The master drive on the primary IDE controller (major
       device number 3) is hda; the slave drive is hdb.  The master drive of the second controller (major device number 22) is hdc and	the  slave
       hdd.

       General	IDE block device names have the form hdX, or hdXP, where X is a letter denoting the physical drive, and P is a number denoting the
       partition on that physical drive.  The first form, hdX, is used to address the whole drive.  Partition numbers are assigned  in	the  order
       the  partitions	are  discovered,  and only nonempty, nonextended partitions get a number.  However, partition numbers 1-4 are given to the
       four partitions described in the MBR (the "primary" partitions), regardless of whether they are unused or extended.  Thus, the first  logi-
       cal  partition  will be hdX5.  Both DOS-type partitioning and BSD-disklabel partitioning are supported.	You can have at most 63 partitions
       on an IDE disk.

       For example, /dev/hda refers to all of the first IDE drive in the system; and /dev/hdb3 refers to the third DOS "primary" partition on  the
       second one.

       They are typically created by:

	      mknod -m 660 /dev/hda b 3 0
	      mknod -m 660 /dev/hda1 b 3 1
	      mknod -m 660 /dev/hda2 b 3 2
	      ...
	      mknod -m 660 /dev/hda8 b 3 8
	      mknod -m 660 /dev/hdb b 3 64
	      mknod -m 660 /dev/hdb1 b 3 65
	      mknod -m 660 /dev/hdb2 b 3 66
	      ...
	      mknod -m 660 /dev/hdb8 b 3 72
	      chown root:disk /dev/hd*

FILES

       /dev/hd*

SEE ALSO

       chown(1), mknod(1), sd(4), mount(8)

COLOPHON

       This  page is part of release 3.27 of the Linux man-pages project.  A description of the project, and information about reporting bugs, can
       be found at http://www.kernel.org/doc/man-pages/.

Linux								    1992-12-17								     HD(4)

SCO