SCO 5.0.5 on compaq presariolaptop C773tu

10 More Discussions You Might Find Interesting

1. Hardware

HP Compaq 6710 - Strange network problems

Hi gurus, I am experiencing strange networks problems. I am trying to teather internet from HTC Desire S with Android. Basicly I followed those instructions: https://wiki.archlinux.org/index.php/Android_Tethering#Procedure 1.) Enable USB Debugging - Phone: Settings --> Applications -->...

2. HP-UX

DST change on Compaq Tru64

Hello all, I hope someone can help me. We have Compaq Tru64 UNIX V5.1B (Rev. 2650). By latest Belarus government act Europe/Minsk timezone was changed to GMT+3 without DST (was GMT+2 with DST). Please advice how to do changes on our machine. Thank You in advance, md1982

3. Windows & DOS: Issues & Discussions

compaq presario v3000 Notebook PC not booting

Hi all, Laptop compaq presario v3000 is not booting! It just gives 3 beeps and there is no display. All the green LEDs are glowing! I have "performed a hard reset" as per HP site Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot Compaq Presario V3115AU...

4. Linux

OS for Compaq Presario 1685

Hi, Trying to install a small OS to run this old laptop. Compaq Presario 1685, circa '98 Processor: AMD K6-2 380 MHz Data Bus Speed: 66 MHz Ram Installed 32 MB moduled Hard Drive: 4.3 GB DVD-ROM Burned in a CD �PUPPY-4.3beta1-k2.6.25.16-v423-SCSI�, tried to boot with it several times BUT...

5. SuSE

cannot load linux on compaq tc1000

Any one try this. I am getting errors or it just hangs up. I have tried redhat, suse,ubuntu etc but nothing will load. When i try to boot the live cd they boot up OK but then just hang after a while and the cd rom stop spinning etc. Just wondering if anyone has use this hdw and what linux...

6. UNIX for Dummies Questions & Answers

Compaq Proliant ML370 G2 with Broadcom BCM5703 NIC

I am trying to re-install this netwrok adapter on a server which has just had the motherboard replaced - so much for fault tolerant. I am running SCO Opensercer 5.0.7 Can anyone tell me the Bus no , device number etc that I need to configure this card? Thanks in advance Richard

7. UNIX for Dummies Questions & Answers

Help In Compaq Tru64 UNix

Hi, I am new to UNIX. I need help in working with Compaq-UX TRU64 OS. How It work FTP Server? ANd MAil Server? and I have apach pprogram project and it work as HTTP Server. Also I need how can setup a new version of progrm on UNix like mozilla and adobe reader etc........... Thank...

8. SCO

compaq smart array 532

Trying to install Sco openserver on HP Proliant with this scsi controller but no scsi devices detected. Boot controller is set as the smart array 532 but SCSI diags do not detect any SCSI boot devices during boot sequence Any help appreciated

9. Filesystems, Disks and Memory

Compaq Scsi

Howto make Debian GNU/Linux install boot on a Compaq DeskPro XL 590 with Compaq SCSI diskdrive? The problem is that Compaq's Scsi controller sems to be odd. help please :)

10. Programming

HPUX and Compaq problem-urgent

Hi All Following is the lines of code which simply makes a structure of 1 bit member and 7 bit is unused.Then the structure is initialised with char pointer.The output on HPUX(BIG Endian) and Compaq(Little Endian) are different.On HPUX it gives zero and Compaq it gives 1. I never thought that the...

LEARN ABOUT DEBIAN

cfree

CFREE(3)						     Linux Programmer's Manual							  CFREE(3)

NAME

       cfree - free allocated memory

SYNOPSIS

       #include <stdlib.h>

       /* In SunOS 4 */
       int cfree(void *ptr);

       /* In glibc or FreeBSD libcompat */
       void cfree(void *ptr);

       /* In SCO OpenServer */
       void cfree(char *ptr, unsigned num, unsigned size);

       /* In Solaris watchmalloc.so.1 */
       void cfree(void *ptr, size_t nelem, size_t elsize);

   Feature Test Macro Requirements for glibc (see feature_test_macros(7)):

       cfree(): _BSD_SOURCE || _SVID_SOURCE

DESCRIPTION

       This function should never be used.  Use free(3) instead.

   1-arg cfree
       In glibc, the function cfree() is a synonym for free(3), "added for compatibility with SunOS".

       Other systems have other functions with this name.  The declaration is sometimes in <stdlib.h> and sometimes in <malloc.h>.

   3-arg cfree
       Some SCO and Solaris versions have malloc libraries with a 3-argument cfree(), apparently as an analog to calloc(3).

       If you need it while porting something, add

	   #define cfree(p, n, s) free((p))

       to your file.

       A frequently asked question is "Can I use free(3) to free memory allocated with calloc(3), or do I need cfree()?"  Answer: use free(3).

       An  SCO	manual writes: "The cfree routine is provided for compliance to the iBCSe2 standard and simply calls free.  The num and size argu-
       ments to cfree are not used."

RETURN VALUE

       The SunOS version of cfree() (which is a synonym for free(3)) returns 1 on success and 0 on failure.  In case of error,	errno  is  set	to
       EINVAL: the value of ptr was not a pointer to a block previously allocated by one of the routines in the malloc(3) family.

CONFORMING TO

       The 3-argument version of cfree() as used by SCO conforms to the iBCSe2 standard: Intel386 Binary Compatibility Specification, Edition 2.

SEE ALSO

       malloc(3)

COLOPHON

       This  page is part of release 3.44 of the Linux man-pages project.  A description of the project, and information about reporting bugs, can
       be found at http://www.kernel.org/doc/man-pages/.

								    2007-07-26								  CFREE(3)

SCO