Login or Register to Ask a Question and Join Our Community


SCO

Tape drive problem

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems SCO Tape drive problem
# 1  
Old 04-14-2008
Data Tape drive problem
I replaced a HP Superstore Dat 40 with another HP Superstore Dat 40, but my backupedge software keeps putting up error code 1 (device not found) I have tried reinstaling the drive as DAT Alad stp 0 6 0 0. I'm not a computer expert but willing to have a go. I went into Backupedge to try and format a new tape to see if device working, and got message cannot open /dev/rstp0 .
# 2  
Old 04-14-2008
Did you set the jumpers/dip switches on the tape to device 6. (Dip switch 2 and 3 on)
Type <ctrl-a> during the boot-up when prompted, you will then be able to see the scsi id of all devices attached to the controller.

Now that you have run mkdev tape several times, you should make sure that you only have one tape configured.
# 3  
Old 04-14-2008
Is this SCO 6.0.0 or Unixware? I have had the SCO 6 operating system see a replacement tape driver as new tape drive, and the OS set it up as rStp1. Have backupedge check resources again and see if it comes up with a new tape drive resource or check the OS and see if you now have a device at rStp1.
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. AIX

AIX 4.2.1 Tape Drive Problem

Hi, The problem I have is I want to restore my AIX machine. I have created a mksysb tape from my tape drive rmt0 and I changed the bootlist using this command "bootlist -m normal rmt0 hdisk0". However, when I display the bootlist "bootlist -om normal", it shows '-' hdisk0. I googled and... (2 Replies)
Discussion started by: AixNoob87
2 Replies

2. Hardware

Help with scsi tape drive problem

I've had a scsi hard drive, scsi tape drive, and cd rom working off an adaptec 29160 controller. Everything worked great until a few days ago. I begin getting tar format errors (running sco 5.0.6) on the tape drive and occasionally the entire system would hang up while trying to access data on... (0 Replies)
Discussion started by: powwm
0 Replies

3. AIX

Tape Drive problem

Hi, I'm at AIX 5.3. My EOD program is giving following error while writing to tape: Can't write output cpio: Media Surface error Failed on Shell-script cd /; cpio -ocB 2 >> /autoline/misc/logs/bk.CopyToTape < /autoline/work/BACKUP.01022 1>/dev/rm0 I have tried with several new tapes,... (2 Replies)
Discussion started by: tayyabq8
2 Replies

4. AIX

Tape drive problem - no process to read data written to a pipe

Hi Everyone, The machine I'm working on is an AIX 5.3 LPAR running on a P650. oslevel -r shows 5300-08. I'm trying to take a backup to a SCSI tape drive, which has been working up until this point. I know of nothing that has changed recently to cause this problem. But when I try to take a... (0 Replies)
Discussion started by: need2bageek
0 Replies

5. HP-UX

HP-Unix 64 bit Tape Drive creating problem

Hello All, I have HP Openview storage data protector version 5.5. When I am going to write my backup I have an error message saying "Connot Open Device /dev/rmt/0mn" Follownig is my output: # ls -l /dev/rmt/0mn crw-rw-rw- 2 bin bin 205 0x080140 Jan 17 16:41 /dev/rmt/0mn # uname -a... (2 Replies)
Discussion started by: hellozishan
2 Replies

6. Solaris

external tape drive DAT 72 problem

Hi all, I have solaris 10 sparc running and working very well but i have problem with external SCSI tape drive DAT 72 problem it seems to me the tape drive is manufactured by SUN microsystems when i ran ls -l /dev/rmt/0 it reveals the following output bash-3.00# mt -f /dev/rmt/0... (2 Replies)
Discussion started by: h@foorsa.biz
2 Replies

7. AIX

Tape Drive Problem.

Dear all, I have ultriam3 tape. It is connected my LPAR. I have that the Sl.Nos. and slot number. but run the cfmgr i am not getting the tape drive. I have fired the command lsdev -Cc tape but no reply. how will i configure the tape in LPAR? Please suggest. It is very urgent. (3 Replies)
Discussion started by: pernasivam
3 Replies

8. Solaris

Problem restoring files from remote tape drive

Server 1 - Sun Solaris 5.8 sparc SUNW,Sun-Fire-480R with attached DLT tape drive /dev/rmt/0n Server 2 - Old DG-UX box which has restore command on it compatible with the files on the backyup tape - backed up with dump2 Server 3 - Sun solaris 5.9 sparc SUNW,Sun-Fire-V490 with lots of free space... (4 Replies)
Discussion started by: lindab
4 Replies

9. AIX

Problem reading a 4mm tape drive

I'm attempting to read a tape in a 4mm drive (AIX 4.3) using the following command... tar tvf /dev/rmt0 ...and I keep getting the following error message: tar: 0511-193 An error occurred while reading from the media. There is not enough memory available now. I've googled this error... (2 Replies)
Discussion started by: tdpearson
2 Replies

10. UNIX for Dummies Questions & Answers

DLT TAPE DRIVE/ Script problem /Ignite.

Thanks for checking in. We have this script that does a backup called Ignite on HP-UX in this script it does everything it supposed to do accept one thing Script ######################################### echo clear cd / echo " Please ensure there is a DLT tape in Slot 6 of the Tape... (2 Replies)
Discussion started by: nemex
2 Replies
Login or Register to Ask a Question