SCO OpenServer Error - there are not enogh disk resources
Hello,
My System configuration is as:
IDE Hrad Disk = 80GB
RAM = 512MB
While doing installation of SCO Open Server 5.0.7, I got stuck at second phase (i.e. IQM). During this phase, I selected for "Fresh" installtion and after that I go for "Customizing Partitions and FileSystems". But it automatically takes "Total available space on disk = 159MB". Of 159MB, it alocates 64 MB to root(/). Now Optional Software size goes beyond the size of root . So, I now I have two options:
1) Either I can increase the size of root , or
2) I can reduce the size of "Optional Software Selection"
As i cannot increase the size of root because it shows "Total available space on disk = 159 MB", which is unalterable. Initially, it takes 320MB for "Optional Software", which is 256 MB greater than root. Now I reduced the size of "Optional Software" to 54 MB by deselecting all the softwres which are initially selected.
But as i proceed further, it displays an error saying -
"There are not enough disk resources"
"for root(/) filesystem, space needed = 127MB"
Hi, I am a new Unix Guru with very little experience but have the task of P2Ving an old HP Proliant ML370 G5 server to VMware ESX 4.1 or ESXi 5.5.
System seems to boots fine but when trying to remove HP software, configure TCP/IP or a driver, I am receiving:
--------
... (7 Replies)
Hi,
We have an old SCO Openserver 5.0.7 server that I have inherited that currently has two issues that we are trying to resolve.
1. We do not know the root password. I have contacted the old admin, looked for rescue disk and documentation but there appears to be nothing.
I have tried... (1 Reply)
One hard disk fail to mount (/dev/data). I had run "fsck /dev/data" then some error occured "unrecoverable error reading SCSI Disk 1 dev 1/104".
I need to recover data from disk. please help. (1 Reply)
I'm "attempting" to install SCO 5.0.7 on an HP ML370 G4 server and am ready to bash the keyboard with head now. I keep getting the error message "WARNING hd: no root disk controller found" when running the bootable install cd.
I have a raid 5 array with an online spare created using 4 36.3 GB... (2 Replies)
my question seems to be simple but i need help on that , actually i am having Fujitsu Siemens Celsius M420 , M440 workstations having 73 GB U320 10 K rpm SCSI HD , i got new HDs 15 K rpm with the same size 68 pins U320 SCSI ,my operating system is SCO Openserver 5.0.6 & Redhat linux release 9
i... (0 Replies)
Hello,
My System configuration is as:
IDE Hrad Disk = 80GB
RAM = 512MB
While doing installation of SCO Open Server 5.0.7, I got stuck at second phase (i.e. IQM). During this phase, I selected for "Fresh" installtion and after that go for "Customizing Partitions and FileSystems". But it... (3 Replies)
Hi,
I have an openserver 5.0.0 machine in the office. The sysad of that machine left years ago without leaving the password to anyone.
I was wondering if someone has a copy of the boot / root diskettes (rescue) for this version? Or perhaps if anyone knows a download link / location in the... (0 Replies)
Hi guys i'm trying to start sshd by doing this "/usr/local/sbin/sshd &"
i'm getting this messages # This platform does not support both privilege separation and compression
Compression disabled
I loaded this 3 files
1-zlib- 1.1.40-vols... (2 Replies)
mlib_SignalUpSample_S16_S16(3MLIB) mediaLib Library Functions mlib_SignalUpSample_S16_S16(3MLIB)NAME
mlib_SignalUpSample_S16_S16, mlib_SignalUpSample_S16S_S16S, mlib_SignalUpSample_F32_F32, mlib_SignalUpSample_F32S_F32S - signal upsampling
SYNOPSIS
cc [ flag... ] file... -lmlib [ library... ]
#include <mlib.h>
mlib_status mlib_SignalUpSample_S16_S16(mlib_s16 *dst, const mlib_s16 *src, mlib_s32 factor, mlib_s32 phase, mlib_s32 n);
mlib_status mlib_SignalUpSample_S16S_S16S(mlib_s16 *dst, const mlib_s16 *src, mlib_s32 factor, mlib_s32 phase, mlib_s32 n);
mlib_status mlib_SignalUpSample_F32_F32(mlib_f32 *dst, const mlib_f32 *src, mlib_s32 factor, mlib_s32 phase, mlib_s32 n);
mlib_status mlib_SignalUpSample_F32S_F32S(mlib_f32 *dst, const mlib_f32 *src, mlib_s32 factor, mlib_s32 phase, mlib_s32 n);
DESCRIPTION
Each of these functions performs upsampling.
For monaural signals, the following equation is used:
dst[i] = src[k] if i == k*factor + phase
dst[i] = 0 if i != k*factor + phase
where k = 0, 1, ..., (n - 1); i = 0, 1, ..., (n*factor - 1).
For stereo signals, the following equation is used:
dst[2*i] = src[2*k] if i == k*factor + phase
dst[2*i] = 0 if i != k*factor + phase
dst[2*i + 1] = src[2*k + 1] if i == k*factor + phase
dst[2*i + 1] = 0 if i != k*factor + phase
where k = 0, 1, ..., (n - 1); i = 0, 1, ..., (n*factor - 1).
PARAMETERS
Each of the functions takes the following arguments:
dst Output signal array.
src Input signal array.
factor Factor by which to upsample. factor >= 1.
phase Parameter that determines relative position of an input value, within the output signal. 0 <= phase < factor.
n Number of samples in the input signal array.
RETURN VALUES
Each of the functions returns MLIB_SUCCESS if successful. Otherwise it returns MLIB_FAILURE.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Interface Stability |Evolving |
+-----------------------------+-----------------------------+
|MT-Level |MT-Safe |
+-----------------------------+-----------------------------+
SEE ALSO mlib_SignalDownSample_S16_S16(3MLIB), attributes(5)SunOS 5.10 10 Nov 2004 mlib_SignalUpSample_S16_S16(3MLIB)