Want to set up SNMP with MIB on SCO OS5

10 More Discussions You Might Find Interesting

1. AIX

AIX native SNMP producing limited results when walking MIB tree

The company I work for has various AIX servers that I've recently migrated to AIX 7.1 (from 6.1). Some are powerHA clusters some are not. Likewise, the systems engineer that I replaced had net-snmp installed on said clustered systems. Long story short I am re-invoking AIX's native SNMP (v3) for...

2. Red Hat

Sending data from DELL OMSA SNMP and Custom SNMP MIB to same UDP port 161

Hi , Currently DELL OMSA SNMP sends data through default udp port 161.I want my custom SNMP MIB also to send data in the same udp port 161.Whether its possible.If yes where to configure .I tried starting my custom MIB in udp port 161,but it throws port already in use.Kindly guide.

3. IP Networking

Sending data from DELL OMSA SNMP and Custom SNMP MIB to same UDP port 161

4. Infrastructure Monitoring

Solaris 10 Snmp command to MiB OID

Hi guys, I am doing follow this guy Tech deposits. : iostat monitoring for zenoss and such I stuck at this step: Add a line into /etc/snmp/snmpd.conf file: pass .1.3.6.1.4.1.2021.255.1 /usr/local/bin/sar_iostat_snmp.sh -m 1 -d dev253 -o .1.3.6.1.4.1.2021.255.1 and test snmp by the...

5. Infrastructure Monitoring

How to Set UP a Server of SNMP

Hi Gurus of UNIX, I am newbi in UNIX. I work in a company that work with a certain type of equipment of networking. I want to configure a SNMP server. I have a PC that had installed Opensolaris, Any want can help, step by step, how to configure a SNMP Server Or can send me the links where I can...

6. UNIX for Advanced & Expert Users

set up SNMP

hi all :) does anyone ever set up an SNMP?? security team asked me to configure or set up my SNMP since it was set by default or no one configure it. but I do not know how to do it, I try to search using google but its hardly to find the tutorial on how to setup this snmp I read this...

7. Solaris

import UCD-SNMP-MIB into snmpd

I was setting up snmpd on a Solaris 8 server and needed more than the standard mibs, so I installed net-snmp so I could get the UCD-SNMP-MIB. I did not know another way, but I am able to monitor what I need. I would like to know if I could import the UCD-SNMP_MIB into the existing...

8. Solaris

Any Idea about (SNMP) HOST-RESOURCES-MIB

Hello , I am using (Application Manager 7) software for monitoring. I want to add the servers to monitored using SNMP but it shows this error HOST-RESOURCES-MIB is not implemented in the Snmp Agent. your help is highly appreciated ..... :)

9. UNIX for Dummies Questions & Answers

SCO OS5 Boot up stops

I have been passed a SCO OS5 server that will not boot up, Im a UNIX starter to say the least, So I was wondering if Im dealing with something simple and I dont know it! The server starts up to the Boot prompt and in either multiple or single mode it will stop during the boot process and wait. ...

10. UNIX for Dummies Questions & Answers

SCO os5 xwindow

I acciedentaly terminated the x window session on my sco os5 machine. Can somone help me get it going again with out rebooting? Another ? Does anyone know where I can get the VNC version for SCO or can some one help me make changes to the RH version to work for SCO OS5. Thanks.

LEARN ABOUT REDHAT

snmp-ups

snmp-ups(8)						      Network UPS Tools (NUT)						       snmp-ups(8)

NAME

       snmp-ups - Driver for RFC 1628 SNMP UPS equipment

NOTE

       This  man  page	only  documents the hardware-specific features of the snmp-ups driver.	For information about the core driver, see nutups-
       drv(8).

SUPPORTED HARDWARE

       Any UPS that is RFC 1628 (UPS MIB) compliant.

EXPERIMENTAL DRIVER

       This driver has been tagged experimental and is not built by default.

REQUIREMENTS

       This driver needs UCD SNMP, aka Net-SNMP installed to compile successfully.  See http://www.net-snmp.org/ for more information.

       On Red Hat 7.2, these packages are required:

	    ucd-snmp-devel-4.2.3-1, ucd-snmp-4.2.3-1, ucd-snmp-utils-4.2.3-1

       You must install SNMP-UPS-MIB.txt in your MIBs directory - typically /usr/share/snmp/mibs/, but it may vary from system to system.  You can
       generate this from chapter 4 of RFC 1628 (see http://www.faqs.org).

EXTRA ARGUMENTS

       This driver supports the following optional settings in the ups.conf(5):

       community=name
	      Set community name (default = public)

       snmp_version=version
	      Set SNMP version (default = v1, the other allowed value is v2c)

INSTALLATION

       This driver is not built by default.  You can build it by using "configure --with-drivers=snmp-ups" before calling make.

IMPLEMENTATION

       The hostname of the UPS is specified with the "port" value in ups.conf, i.e.:

	    [snmp]
		 driver = snmp-ups
		 port = snmp-ups.example.com
		 community = public
		 snmp_version = v1

SUPPORTED VARIABLES

	    INFO_MFR  UPS Manufacturer
	    INFO_MODEL	   UPS Model
	    INFO_FIRMREV   Firmware/Software Version
	    INFO_STATUS    OFF, OL, OB, BOOST, TRIM
	    INFO_BATTPCT   Battery percentage
	    INFO_RUNTIME   Predicted runtime on battery
	    INFO_BATTVOLT  Battery Voltage
	    INFO_OUTVOLT   Output Voltage

PLANNED SUPPORT

	    INFO_UTILITY   Input Voltage
	    INFO_ACFREQ    AC Frequency
	    INFO_UPSTEM    UPS Temperature
	    INFO_LOADPCT   Load Percentage
	    CMD_?	   Not determined

AUTHORS

       Arnaud Quette, Hans Ekkehard Plesser

SEE ALSO

   The core driver:
       nutupsdrv(8)

   Internet resources:
       The NUT (Network UPS Tools) home page: http://www.exploits.org/nut/

       NUT mailing list archives and information: http://lists.exploits.org/

								  Tue Oct 22 2002						       snmp-ups(8)

SCO