10 More Discussions You Might Find Interesting
1. AIX
The company I work for has various AIX servers that I've recently migrated to AIX 7.1 (from 6.1). Some are powerHA clusters some are not. Likewise, the systems engineer that I replaced had net-snmp installed on said clustered systems. Long story short I am re-invoking AIX's native SNMP (v3) for... (1 Reply)
Discussion started by: davix
1 Replies
2. Red Hat
Hi ,
Currently DELL OMSA SNMP sends data through default udp port 161.I want my custom SNMP MIB also to send data in the same udp port 161.Whether its possible.If yes where to configure .I tried starting my custom MIB in udp port 161,but it throws port already in use.Kindly guide. (1 Reply)
Discussion started by: prabakar4all
1 Replies
3. IP Networking
Hi ,
Currently DELL OMSA SNMP sends data through default udp port 161.I want my custom SNMP MIB also to send data in the same udp port 161.Whether its possible.If yes where to configure .I tried starting my custom MIB in udp port 161,but it throws port already in use.Kindly guide. (0 Replies)
Discussion started by: prabakar4all
0 Replies
4. Infrastructure Monitoring
Hi guys,
I am doing follow this guy Tech deposits. : iostat monitoring for zenoss and such
I stuck at this step:
Add a line into /etc/snmp/snmpd.conf file:
pass .1.3.6.1.4.1.2021.255.1 /usr/local/bin/sar_iostat_snmp.sh -m 1 -d dev253 -o .1.3.6.1.4.1.2021.255.1
and test snmp by the... (1 Reply)
Discussion started by: tien86
1 Replies
5. Infrastructure Monitoring
Hi Gurus of UNIX,
I am newbi in UNIX. I work in a company that work with a certain type of equipment of networking. I want to configure a SNMP server.
I have a PC that had installed Opensolaris, Any want can help, step by step, how to configure a SNMP Server
Or can send me the links where I can... (3 Replies)
Discussion started by: andresguillen
3 Replies
6. UNIX for Advanced & Expert Users
hi all :)
does anyone ever set up an SNMP?? security team asked me to configure or set up my SNMP since it was set by default or no one configure it. but I do not know how to do it, I try to search using google but its hardly to find the tutorial on how to setup this snmp
I read this... (8 Replies)
Discussion started by: flekzout
8 Replies
7. Solaris
I was setting up snmpd on a Solaris 8 server and needed more than the standard mibs, so I installed net-snmp so I could get the UCD-SNMP-MIB. I did not know another way, but I am able to monitor what I need.
I would like to know if I could import the UCD-SNMP_MIB into the existing... (0 Replies)
Discussion started by: csross
0 Replies
8. Solaris
Hello ,
I am using (Application Manager 7) software for monitoring. I want to add the servers to monitored using SNMP but it shows this error
HOST-RESOURCES-MIB is not implemented in the Snmp Agent.
your help is highly appreciated ..... :) (4 Replies)
Discussion started by: adel8483
4 Replies
9. UNIX for Dummies Questions & Answers
I have been passed a SCO OS5 server that will not boot up, Im a UNIX starter to say the least, So I was wondering if Im dealing with something simple and I dont know it!
The server starts up to the Boot prompt and in either multiple or single mode it will stop during the boot process and wait. ... (0 Replies)
Discussion started by: cscmsupport
0 Replies
10. UNIX for Dummies Questions & Answers
I acciedentaly terminated the x window session on my sco os5 machine. Can somone help me get it going again with out rebooting? Another ? Does anyone know where I can get the VNC version for SCO or can some one help me make changes to the RH version to work for SCO OS5.
Thanks. (2 Replies)
Discussion started by: ruizf
2 Replies
SNMP-BRIDGE-MIB(1) Net-SNMP SNMP-BRIDGE-MIB(1)
NAME
snmp-bridge-mib - provide Linux bridge information via SNMP
SYNOPSIS
snmp-bridge-mib {bridge}
ARGUMENTS
The following arguments are required:
bridge
The name of the Linux bridge for which you want to provide information via SNMP, e.g. br0.
DESCRIPTION
The snmp-bridge-mib is an extension to net-snmp. It collects information about a bridge in a Linux system and exports them for query from
other (remote) systems for management purposes.
CONFIGURATION
:
The preferred method of snmp-bridge-mib to attach to net-snmp is agentx. For this to work, you will have to add the following line to
/etc/snmp/snmpd.conf,
master agentx
restart snmpd and start snmp-bridge-mib. snmp-bridge-mib will then connect to the running snmpd daemon.
Another way of attaching snmp-bridge-mib to is to run it as an embedded perl module. You have to add
perl do "path to location of snmp-bridge-mib"
and restart snmpd.
EXAMPLE
:
Follow the instructions in this manpage and type
perl /usr/bin/snmp-bridge-mib br0
You'll get the following output:
registering at .1.3.6.1.2.1.17
running as a subagent.
dot1qbridge agent started.
NET-SNMP version 5.4.2.1 AgentX subagent connected
Now it's time for a first test:
$ export MIBS=+BRIDGE-MIB
$ snmpwalk localhost .1.3.6.1.2.1.17
The output produced should look like
BRIDGE-MIB::dot1dStpBridgeHelloTime = INTEGER: 199 centi-seconds
BRIDGE-MIB::dot1dStpBridgeForwardDelay = INTEGER: 1499 centi-seconds
BRIDGE-MIB::dot1dStpPort.1 = INTEGER: 1
BRIDGE-MIB::dot1dStpPort.3 = INTEGER: 3
BRIDGE-MIB::dot1dStpPortPriority.1 = INTEGER: 32
BRIDGE-MIB::dot1dStpPortPriority.3 = INTEGER: 32
BRIDGE-MIB::dot1dStpPortState.1 = INTEGER: disabled(1)
BRIDGE-MIB::dot1dStpPortState.3 = INTEGER: disabled(1)
BRIDGE-MIB::dot1dStpPortEnable.1 = INTEGER: disabled(2)
BRIDGE-MIB::dot1dStpPortEnable.3 = INTEGER: disabled(2)
BRIDGE-MIB::dot1dStpPortPathCost.1 = INTEGER: 2
BRIDGE-MIB::dot1dStpPortPathCost.3 = INTEGER: 4
BRIDGE-MIB::dot1dStpPortDesignatedRoot.1 = STRING: "8000.001018382c78"
BRIDGE-MIB::dot1dStpPortDesignatedRoot.3 = STRING: "8000.001018382c78"
BRIDGE-MIB::dot1dStpPortDesignatedCost.1 = INTEGER: 0
BRIDGE-MIB::dot1dStpPortDesignatedCost.3 = INTEGER: 0
BRIDGE-MIB::dot1dStpPortDesignatedBridge.1 = STRING: "8000.001018382c78"
BRIDGE-MIB::dot1dStpPortDesignatedBridge.3 = STRING: "8000.001018382c78"
BRIDGE-MIB::dot1dStpPortDesignatedPort.1 = STRING: "32769"
BRIDGE-MIB::dot1dStpPortDesignatedPort.3 = STRING: "32770"
BRIDGE-MIB::dot1dStpPortPathCost32.1 = INTEGER: 2
BRIDGE-MIB::dot1dStpPortPathCost32.3 = INTEGER: 4
BRIDGE-MIB::dot1dTpLearnedEntryDiscards = Counter32: 0
BRIDGE-MIB::dot1dTpAgingTime = INTEGER: 300 seconds
BRIDGE-MIB::dot1dTpFdbAddress.'...8,x' = STRING: 0:10:18:38:2c:78
BRIDGE-MIB::dot1dTpFdbAddress.'.!^/B|' = STRING: 0:21:5e:2f:42:7c
BRIDGE-MIB::dot1dTpFdbPort.'...8,x' = INTEGER: 1
BRIDGE-MIB::dot1dTpFdbPort.'.!^/B|' = INTEGER: 3
BRIDGE-MIB::dot1dTpFdbStatus.'...8,x' = INTEGER: learned(3)
BRIDGE-MIB::dot1dTpFdbStatus.'.!^/B|' = INTEGER: learned(3)
BRIDGE-MIB::dot1dTpPort.1 = INTEGER: 1
BRIDGE-MIB::dot1dTpPort.3 = INTEGER: 3
BRIDGE-MIB::dot1dTpPortMaxInfo.1 = INTEGER: 1500 bytes
BRIDGE-MIB::dot1dTpPortMaxInfo.3 = INTEGER: 1500 bytes
BRIDGE-MIB::dot1dTpPortInFrames.1 = Counter32: 18082 frames
BRIDGE-MIB::dot1dTpPortInFrames.3 = Counter32: 1546072 frames
BRIDGE-MIB::dot1dTpPortOutFrames.1 = Counter32: 11601 frames
BRIDGE-MIB::dot1dTpPortOutFrames.3 = Counter32: 10988 frames
BRIDGE-MIB::dot1dTpPortInDiscards.1 = Counter32: 0 frames
BRIDGE-MIB::dot1dTpPortInDiscards.3 = Counter32: 0 frames
BUGS
1. snmp-bridge-mib currently only supports one bridge which has to be specified on the commandline.
2. Not all elements of RFC 4188 because they are either not available in sysfs or difficult to extract from the existing data.
SEE ALSO
snmpd.conf(5), Net::SNMP(3)
AUTHOR
Jens Osterkamp <jens@linux.vnet.ibm.com>
Developer
COPYRIGHT
Copyright (C) 2009, 2010 IBM Corp., All Rights Reserved
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the
"Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish,
distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to
the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
http://www.ibm.com/ v6 26 Mar 2010 SNMP-BRIDGE-MIB(1)