We recently started having problems with our SCO OpenServer 5.0.2 Server. I know it is VERY outdated but we are unable to move off of it yet due to an application that is still used daily. We have a new software replacement that will be implemented Q3 2016.
I was looking for some installation media so I could try to virtualize the system before it crashes. Would anyone be able to provide virtual images of the media needed in order to create a United States virtual SCO 5.0.2 system inside of Hyper-V? I've found some other instructions to install 5.0.2 on VMWare and assume I can modify it for Hyper-V. Or if you have a document for installing on Hyper-V that would be a great supplement with the media.
hello everyone
i need a copy of sco 5.0.6 iso for isntall a new server crash
I read in a post that someone uploaded to an ftp an iso but I did not find the ftp
any can helpme? (7 Replies)
Hello, i need if possible media for sco openserver 5.0.6 and also want to know if is possible to upgrade from 5.0.2 to 5.0.6.
Best regards,
Paolo (1 Reply)
Greetings,
I've recently been given responsibility for a legacy server running SCO OpenServer 5.0.4 and upon taking inventory I discovered we have all the license documents but no installation media. Can anyone assist me with where I might download these?
Thanks
Kevin (9 Replies)
I need to reinstall SCO 5.0.4 onto another server as the customer does mnot want to pay for another license. Does anoine have the installation media for this? I'm willing to trade as I have every other installation CD. Let me download the 5.0.4 media from you and I'll give you any OS you want. I... (2 Replies)
My client has lost the SCO OS 5.0.5 install media.
However, they do have a working SCO 5.0.5 system, but is crumbling apart.
Where can I find the SCO OS 5.0.5 install media?
Or can I get a copy of the SCO CD as a ISO file?
Your help is much appreciated. (7 Replies)
Hi Am kind of new in Unix. I am used to installing SCO Unix 5.0.5 (very old i guess) on a server with SCSI RAID 0. at the boot prompt during installation I type
restart link=ipsraid Srom=wd(0,0,0,0). But the problem now is that i want to install on a server with no RAID SCSI disk. what command do... (3 Replies)
UBT(4) BSD Kernel Interfaces Manual UBT(4)NAME
ubt -- USB Bluetooth driver
SYNOPSIS
ubt* at uhub? port ? configuration ? interface ?
DESCRIPTION
The ubt driver provides support for USB Bluetooth dongles to the Bluetooth protocol stack.
USB Bluetooth dongles provide two interfaces, both of which the ubt driver claims. The second interface is used for Isochronous data and
will have several alternate configurations regarding bandwidth consumption, which can be set using the hw.ubtN.config sysctl(8) variable.
The number of alternate configurations is indicated by the value in the hw.ubtN.alt_config variable, and the isoc frame size for the current
configuration is shown in the hw.ubtN.sco_rxsize and hw.ubtN.sco_txsize variables.
By default, configuration 0 is selected, which means that no bandwidth is used on the Isochronous interface and no SCO data can be sent.
Consult the Bluetooth USB specification at https://www.bluetooth.org/ for complete instructions on setting bandwidth consumption. The fol-
lowing extract may be useful as a general guidance though details may differ between manufacturers.
0 No active voice channels
1 One voice channel with 8-bit encoding
2 Two voice channels with 8-bit encoding, or one voice channel with 16-bit encoding.
3 Three voice channels with 8-bit encoding
4 Two voice channels with 16-bit encoding
5 Three voice channels with 16-bit encoding
SEE ALSO bluetooth(4), uhub(4), sysctl(8)HISTORY
This ubt device driver was originally a character device written by David Sainty and Lennart Augustsson. It was rewritten to support socket
based Bluetooth access for NetBSD 4.0 by Iain Hibbert.
CAVEATS
Isochronous data is seemingly not well supported over USB in the current system and to get SCO working, you may have to calculate the SCO
packet size that the stack will use. This is the sco_mtu value reported by the btconfig(8) command, and when combined with the SCO header (3
bytes) should fit exactly into an integer number of Isochronous data frames where the frame size is indicated by the 'hw.ubtN.sco_txsize'
sysctl variable.
For example: I want one voice channel (which is all that is supported, for now) so am using configuration #2, with a frame length of 17
bytes. This gives possible values of:
(17 * 1) - 3 = 14
(17 * 2) - 3 = 31
(17 * 3) - 3 = 48
(17 * 4) - 3 = 65
(17 * 5) - 3 = 82
etc.
btconfig(8) shows the maximum SCO payload as 64 bytes, so I am using the next smaller size of 48, to minimize the overhead of the 3 header
bytes.
The SCO packet size can be changed using the 'scomtu' option to btconfig(8).
The failure mode is that the USB Bluetooth dongle locks up though generally removal/reinsertion will clear the problem.
BUGS
The Isochronous configuration can only be changed when the device is not marked up.
BSD August 27, 2006 BSD