Maximuim size hard drive in SCO 5.05

9 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

External hard drive

I have connected an external hard drive. I can't find it. Both ls /media, fdisk -l and ls /dev show nothing. TIA

2. Solaris

I'm trying to reduce hard drive size (number of cylinders) in SPARC Solaris. Its easy to change last cylinder of last slice, but that cannot be done for slice2/backupslice because it insists on whole disk. If I try to change disk type/geometry, all slices get replaced with some 'default'...

3. SCO

Add hard drive to SCO 6.0.0

I've been working on installing SCO OpenServer 6.0.0 and need to install a second hard drive onto the system. I have not done this too often (5 years ago for the same client) and I can not write the "divvy table" to the system (I/O Error.) Where can I find detail step by step instructions?

4. SCO

SCO hard drive with data - No SCO computer

Situation - i have an IDE hard drive from server apparently running SCO last used in 2003. No access to computer it was formerly in. I need to access the drive to pull off data files from a billing/scheduling program. I have no SCO machine or access to one atm. Have some limited Linux...

5. Filesystems, Disks and Memory

The best partitioning schem for a 250GB Sata hard drive & a 75GB SCSI hard drive

Hi I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /...

6. UNIX for Dummies Questions & Answers

Trying to copy old hard drive to new hard drive.

:confused: ........I have a new hard drive and I need to copy ALL info from the old to the new. I would like to use the dd command. I know the command is as follows...... dd if=/dev/rdsk/c1t1d0s0 of=/dev/rdsk/???????? Where I have the question marks is the problem. How do I find out what the...

7. SCO

adding hard disk from SCO OpSer in SCO 5.06

Hi! Sorry, but I am'not spesialist in SCO OpenServer. I need to add hard disk from SCO Open Server ( "a") in my SCO OpenServer 5.6. I need data from "a". When I added, I see only swap disk, and didn't see root file system. I need to add IDE and SCSI Please, help me. How right to add disk?...

8. SCO

SCO 5.05 hard drive pulsing constantly

Just recently my hard drive has started to pulse like data is being read or written constantly. Causes?

9. UNIX for Dummies Questions & Answers

currupted my hard drive

Hello, earlier tonight I was installing BETA version of Mandrake Linux 9.0 and I realised I needed to partition my drive. I tried making the partition within mandrake but ther wasnt an option within the mandrake setup. So i go into my WindowsXP and do the disk management option but there want a...

LEARN ABOUT NETBSD

ubt

UBT(4)							   BSD Kernel Interfaces Manual 						    UBT(4)

NAME

     ubt -- USB Bluetooth driver

SYNOPSIS

     ubt* at uhub? port ? configuration ? interface ?

DESCRIPTION

     The ubt driver provides support for USB Bluetooth dongles to the Bluetooth protocol stack.

     USB Bluetooth dongles provide two interfaces, both of which the ubt driver claims.  The second interface is used for Isochronous data and
     will have several alternate configurations regarding bandwidth consumption, which can be set using the hw.ubtN.config sysctl(8) variable.
     The number of alternate configurations is indicated by the value in the hw.ubtN.alt_config variable, and the isoc frame size for the current
     configuration is shown in the hw.ubtN.sco_rxsize and hw.ubtN.sco_txsize variables.

     By default, configuration 0 is selected, which means that no bandwidth is used on the Isochronous interface and no SCO data can be sent.
     Consult the Bluetooth USB specification at https://www.bluetooth.org/ for complete instructions on setting bandwidth consumption.	The fol-
     lowing extract may be useful as a general guidance though details may differ between manufacturers.

     0	  No active voice channels
     1	  One voice channel with 8-bit encoding
     2	  Two voice channels with 8-bit encoding, or one voice channel with 16-bit encoding.
     3	  Three voice channels with 8-bit encoding
     4	  Two voice channels with 16-bit encoding
     5	  Three voice channels with 16-bit encoding

SEE ALSO

     bluetooth(4), uhub(4), sysctl(8)

HISTORY

     This ubt device driver was originally a character device written by David Sainty and Lennart Augustsson.  It was rewritten to support socket
     based Bluetooth access for NetBSD 4.0 by Iain Hibbert.

CAVEATS

     Isochronous data is seemingly not well supported over USB in the current system and to get SCO working, you may have to calculate the SCO
     packet size that the stack will use.  This is the sco_mtu value reported by the btconfig(8) command, and when combined with the SCO header (3
     bytes) should fit exactly into an integer number of Isochronous data frames where the frame size is indicated by the 'hw.ubtN.sco_txsize'
     sysctl variable.

     For example: I want one voice channel (which is all that is supported, for now) so am using configuration #2, with a frame length of 17
     bytes.  This gives possible values of:

	   (17 * 1) - 3 = 14
	   (17 * 2) - 3 = 31
	   (17 * 3) - 3 = 48
	   (17 * 4) - 3 = 65
	   (17 * 5) - 3 = 82
	   etc.

     btconfig(8) shows the maximum SCO payload as 64 bytes, so I am using the next smaller size of 48, to minimize the overhead of the 3 header
     bytes.

     The SCO packet size can be changed using the 'scomtu' option to btconfig(8).

     The failure mode is that the USB Bluetooth dongle locks up though generally removal/reinsertion will clear the problem.

BUGS

     The Isochronous configuration can only be changed when the device is not marked up.

BSD
								  August 27, 2006							       BSD

SCO