adding hard disk from SCO OpSer in SCO 5.06

10 More Discussions You Might Find Interesting

1. AIX

Adding New Hard Disk

Hi, On P5 I would like to add hard drive, currently 2 hard disk are already exists, would like to add one more, 2 Slots are emtpy, I would like to know how to find out wheather adapter is attached to that 2 free slot using command.

2. Solaris

Adding Extra Hard Disk

Hi Solaris users - I have an Ultra10 SPARC machine, with IIe processor. To prepare for the Solaris10 admin exam PartII I need to set up the metadb/mirroring in my machine, but do not know how to do this properly. I need this to practice the mirroring tasks. If anyone could help it would be...

3. SCO

Recover data from failed Hard disk in SCO OpenServer 5.06

One hard disk fail to mount (/dev/data). I had run "fsck /dev/data" then some error occured "unrecoverable error reading SCSI Disk 1 dev 1/104". I need to recover data from disk. please help.

4. SCO

SATA Hard Disk support by SCO OpenServer 5.05

Is SATA hard disk is suooprted by SCO OpenServer 5.05? If No, how to couter this problem. If yes, please provide the installation steps.

5. UNIX for Dummies Questions & Answers

SCO openserver 5.0.6 compatible hard disk

my question seems to be simple but i need help on that , actually i am having Fujitsu Siemens Celsius M420 , M440 workstations having 73 GB U320 10 K rpm SCSI HD , i got new HDs 15 K rpm with the same size 68 pins U320 SCSI ,my operating system is SCO Openserver 5.0.6 & Redhat linux release 9 i...

6. SCO

Add hard drive to SCO 6.0.0

I've been working on installing SCO OpenServer 6.0.0 and need to install a second hard drive onto the system. I have not done this too often (5 years ago for the same client) and I can not write the "divvy table" to the system (I/O Error.) Where can I find detail step by step instructions?

7. SCO

SCO hard drive with data - No SCO computer

Situation - i have an IDE hard drive from server apparently running SCO last used in 2003. No access to computer it was formerly in. I need to access the drive to pull off data files from a billing/scheduling program. I have no SCO machine or access to one atm. Have some limited Linux...

8. Shell Programming and Scripting

IInd Hard Disk Mounting Problem on 1st HDD On SCO UNIX Open Server

Hi Engg. ! :mad: I have a harddisk on which SCO UNIX Open Server was installed. There was some data (in .dbf format) on it. Present condition of HDD is that it is not booting. Now I want to mount this HDD through other HDD on which SCO UNIX Open Server is installed by attaching...

9. Filesystems, Disks and Memory

Adding hard Disk

Hi all, I am using SCO Openserver V and I want to add one more harddisk (/dev/hd1) Hw can I do it?

10. UNIX for Dummies Questions & Answers

Restring the SCO on new hard disk

Hi friends, I 'm using sco open server on P-100. The back up is on boot-root floppy and data cartridge only. Usually we can restore the things easyly by cpio. But for one new hard disk which was used for windows -98, the installation is a problem. It seems everything to be installed but...

LEARN ABOUT NETBSD

ubt

UBT(4)							   BSD Kernel Interfaces Manual 						    UBT(4)

NAME

     ubt -- USB Bluetooth driver

SYNOPSIS

     ubt* at uhub? port ? configuration ? interface ?

DESCRIPTION

     The ubt driver provides support for USB Bluetooth dongles to the Bluetooth protocol stack.

     USB Bluetooth dongles provide two interfaces, both of which the ubt driver claims.  The second interface is used for Isochronous data and
     will have several alternate configurations regarding bandwidth consumption, which can be set using the hw.ubtN.config sysctl(8) variable.
     The number of alternate configurations is indicated by the value in the hw.ubtN.alt_config variable, and the isoc frame size for the current
     configuration is shown in the hw.ubtN.sco_rxsize and hw.ubtN.sco_txsize variables.

     By default, configuration 0 is selected, which means that no bandwidth is used on the Isochronous interface and no SCO data can be sent.
     Consult the Bluetooth USB specification at https://www.bluetooth.org/ for complete instructions on setting bandwidth consumption.	The fol-
     lowing extract may be useful as a general guidance though details may differ between manufacturers.

     0	  No active voice channels
     1	  One voice channel with 8-bit encoding
     2	  Two voice channels with 8-bit encoding, or one voice channel with 16-bit encoding.
     3	  Three voice channels with 8-bit encoding
     4	  Two voice channels with 16-bit encoding
     5	  Three voice channels with 16-bit encoding

SEE ALSO

     bluetooth(4), uhub(4), sysctl(8)

HISTORY

     This ubt device driver was originally a character device written by David Sainty and Lennart Augustsson.  It was rewritten to support socket
     based Bluetooth access for NetBSD 4.0 by Iain Hibbert.

CAVEATS

     Isochronous data is seemingly not well supported over USB in the current system and to get SCO working, you may have to calculate the SCO
     packet size that the stack will use.  This is the sco_mtu value reported by the btconfig(8) command, and when combined with the SCO header (3
     bytes) should fit exactly into an integer number of Isochronous data frames where the frame size is indicated by the 'hw.ubtN.sco_txsize'
     sysctl variable.

     For example: I want one voice channel (which is all that is supported, for now) so am using configuration #2, with a frame length of 17
     bytes.  This gives possible values of:

	   (17 * 1) - 3 = 14
	   (17 * 2) - 3 = 31
	   (17 * 3) - 3 = 48
	   (17 * 4) - 3 = 65
	   (17 * 5) - 3 = 82
	   etc.

     btconfig(8) shows the maximum SCO payload as 64 bytes, so I am using the next smaller size of 48, to minimize the overhead of the 3 header
     bytes.

     The SCO packet size can be changed using the 'scomtu' option to btconfig(8).

     The failure mode is that the USB Bluetooth dongle locks up though generally removal/reinsertion will clear the problem.

BUGS

     The Isochronous configuration can only be changed when the device is not marked up.

BSD
								  August 27, 2006							       BSD

SCO