1. Is the old machine still running?
2. If you do a fresh install, and add the patches, then add the nic driver, all before restoring any data, do you still have the missing controller issue?
Hi, I'm new to this Unix world and have taken over looking after the I.T side of things at work, which includes the internal ERP system which runs on a UNIX SCO platform.
My initial worry is what state this is in as its been on site over 20 years.
What would be the first things to check on... (13 Replies)
I have a sun fire v240 server.
The output of prtdiag -v shows a failed fan.
There are 3 fans for cooling system board.
There is 1 fan for each of the powersupply (There are 2 powersupplies)
From the below output how do i know which fan is bad and whats its location... (3 Replies)
Dear All
I am a newbie in this forums, I need your expertise assistant on my SCO OpenServer
I am currently facing to the BiG problems like this one:
"dspmsg: could not execute command printf: No such file or drirectory Error 2"
I supposed the file is missing, could you please check if... (4 Replies)
Hi,
Completely new to UNIX - so be gentle
Cut a long story short, we have a micros 8700 system (eclipse) that needs the Micros 8700 software installed.
The system needs UNIX and I have downloaded and successfully installed SCO open Server 6 and can log into root e.t.c.
Now I have... (13 Replies)
Hi everyone, I am having a problem using SCO
I have used linux for years and actually learned linux command line from a unix book, but this is my first experience with sco.
I have a server that was running sco 3.04 and thoroughbred basic software. It crashed, and the only backup is on some... (0 Replies)
:o
I should know this but here it goes.
Can a Sco server be renamed without re-installation?
I have a client that supposedly took some networking course along
the way time ago and did sco server intallations in offices in two different states with the same name and domain. Now he wants them... (1 Reply)
Dear All,
I am considering installing SCO Open Server as an alternative to MS Exchange. Has anybody had any real world experience of using Open Office?
Thanks,
TC. (1 Reply)
Dear sir,
I am using sco open server 5.06.How we can reboot the system without using root password? Whar are the permision need to change to do this.
Thanks,
Mostafizur Rahman (3 Replies)
COMPAT_IBCS2(8) BSD System Manager's Manual COMPAT_IBCS2(8)NAME
compat_ibcs2 -- setup procedure for running iBCS2 binaries
DESCRIPTION
NetBSD supports running Intel Binary Compatibility Standard 2 (iBCS2) binaries. This only applies to i386 systems for now. Binaries are
supported from SCO UNIX and other systems derived from AT&T System V Release 3 UNIX. iBCS2 support is only well tested using SCO binaries.
XENIX binaries are also supported although not as well tested. SVR4 binaries are supported by the COMPAT_SVR4 option.
iBCS2 supports COFF, ELF, and x.out (XENIX) binary formats. Binaries from SCO OpenServer (version 5.x) are the only ELF binaries that have
been tested. Most programs should work, but not ones that use or depend on:
kernel internal data structures
STREAMS drivers (other than TCP/IP sockets)
local X displays (uses a STREAMS pipe)
virtual 8086 mode
The iBCS2 compatibility feature is active for kernels compiled with the COMPAT_IBCS2 option enabled. If support for iBCS2 ELF executables is
desired, the EXEC_ELF32 option should be enabled in addition to COMPAT_IBCS2.
Many COFF-format programs and most ELF-format programs are dynamically linked. This means that you will also need the shared libraries that
the program depends on. Also, you will need to create a ``shadow root'' directory for iBCS2 binaries on your NetBSD system. This directory
is named /emul/ibcs2. Any file operations done by iBCS2 programs run under NetBSD will look in this directory first. So, if an iBCS2 pro-
gram opens, for example, /etc/passwd, NetBSD will first try to open /emul/ibcs2/etc/passwd, and if that does not exist open the 'real'
/etc/passwd file. It is recommended that you install iBCS2 packages that include configuration files, etc. under /emul/ibcs2, to avoid nam-
ing conflicts with possible NetBSD counterparts. Shared libraries should also be installed in the shadow tree.
Generally, you will need to look for the shared libraries that iBCS2 binaries depend on only the first few times that you install an iBCS2
program on your NetBSD system. After a while, you will have a sufficient set of iBCS2 shared libraries on your system to be able to run
newly imported iBCS2 binaries without any extra work.
Setting up shared libraries
How to get to know which shared libraries iBCS2 binaries need, and where to get them? Depending on the file type of the executable, there are
different possibilities (when following these instructions: you will need to be root on your NetBSD system to do the necessary installation
steps).
COFF binaries You can simply copy all of the available shared libraries since they are fairly small in size. The COFF shared libraries are
typically found in /shlib and can be obtained from the following sources:
SCO UNIX version 3.x (aka ODT)
SCO UNIX version 5.x (aka OpenServer)
SCO UnixWare
Many versions of SVR4.2/x86
After copying the shared libraries, you should have at least the following files on your system:
/emul/ibcs2/shlib/libc_s
/emul/ibcs2/shlib/libnsl_s
/emul/ibcs2/shlib/protlib_s
ELF binaries You can simply copy all of the available shared libraries from the source system or distribution or use ldd(1) to determine
the libraries required by a specific binary.
After copying the shared libraries, you should have at least the following files on your system:
/emul/ibcs2/usr/lib/libc.so.1
/emul/ibcs2/usr/lib/libcrypt.so
/emul/ibcs2/usr/lib/libndbm.so
/emul/ibcs2/usr/lib/libsocket.so.1
If you don't have access to a SCO system, you will need to get the extra files you need from a SCO distribution. As of January 1998, SCO
sells a copy of SCO OpenServer (iBCS2) and/or SCO UnixWare (SVR4) for personal/non-commercial use for only the cost of shipping (about
$20US). The distribution comes on an ISO9660-format CDROM which can be mounted and used to copy the necessary files.
Run the following script to copy the basic set of files from a SCO distribution directory mounted somewhere locally:
/usr/share/examples/emul/ibcs2/ibcs2-setup [directory]
You should now be set up for SCO binaries which only need standard shared libs.
BUGS
The information about SCO distributions may become outdated.
Attempting to a use a nameserver on the local host does not currently work due to an absurd shortcut taken by the iBCS2 network code (remem-
ber that there are no kernel sockets).
16/32/64 bit offsets may not be handled correctly in all cases.
BSD February 8, 1998 BSD