Login or Register to Ask a Question and Join Our Community


SCO

Openserver 5.0.4 can't be ping or telnet into from a remote site

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems SCO Openserver 5.0.4 can't be ping or telnet into from a remote site
# 1  
Old 02-09-2004
Openserver 5.0.4 can't be ping or telnet into from a remote site
Hi,

Can anybody help me out why l can't not ping my server with Openserver 5.0.4 with my windows machine from a remote site.
The machine could see the local LAN with the Router however, i can't ping or telnet unto the server from another site on the WAN. The default gateway was configure on the Openserver under the Advanced option but it didn't work.
Can anybody assist me on this?

Thanks

Kayode
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. BSD

Ping remote sever, nc, telnet, whatever

I put this thread to shell and bsd, because I want to resolve this matter on bsd. May somebody can explain to me how to ping a remote server, in unix. BTW the following code examples were tried on a linux system as well, with the same output, nothing. But on my bsd are not installed nmap neither... (4 Replies)
Discussion started by: 1in10
4 Replies

2. Shell Programming and Scripting

ping and telnet timeout

Hello, I need help, I have the following which save in the result file ping and telnet:port test. Basically the script works but I should implement a check on ping and telnet command so that ping has 5 seconds threshold and telnet (more important) 10 seconds. Over that threshold ping and... (0 Replies)
Discussion started by: marmellata
0 Replies

3. AIX

ping OK - telnet refused

Hi, After a crash of our older AIX server it happend as it is in the title: ping is ok, but telnet: What it can be this strange thing? Franci (2 Replies)
Discussion started by: frajer
2 Replies

4. UNIX for Advanced & Expert Users

ping and telnet - HP-UX

Hi all, I am not sure if my problem is specific to HP-UX or not. Hopefully someone can tell me what's wrong. I have a server name server1 10.100.50.10 in the /etc/hosts file and if I do a ping server1, it shows the right IP address. However, if I run telnet server1, it is not using... (4 Replies)
Discussion started by: newbie_01
4 Replies

5. Infrastructure Monitoring

no telnet, ping ok...

We have a Sun Solaris Netra 20 server. Our O&M Server gets Alarm Processor not responding. When Alarm occurs, you can ping the sun server but cannot telnet it. We keep getting Interrupt level not serviced. var/adm/message log is > tail -f messages Apr 12 20:09:56 cama pcisch: PCI-device:... (9 Replies)
Discussion started by: krabu
9 Replies

6. IP Networking

can ping but can not telnet UNIX

I have one problem and it is giving me hard time I can ping my windows machine root@x1ChXpress:/sbin >ping 192.168.129.66 192.168.129.66 is alive root@x1ChXpress:/sbin >netstat -rn Routing Table: Destination Gateway Flags Ref Use Interface... (3 Replies)
Discussion started by: amon
3 Replies

7. AIX

Ping/Telnet is not happening

Hi All, We are not able to ping to a AIX box...Network is ok..when we give ping from that AIX box..it is giving 0821-067 ping: The socket creation call failed.there is no enough buffer space for the requested socket operation. refresh -s inetd is also giving socket error. Please help to... (1 Reply)
Discussion started by: b_manu78
1 Replies

8. UNIX for Dummies Questions & Answers

SCO openserver 5.0.6 Telnet Problems

Hi guys, Please bear with me i have a sco 5.0.6 openserver i'm telnet in to it. (via dsl) After 7 minutes it will kick me out of my program. Is there any settings that i need to change in order to stop the time out problem. I dont have any router or hub (dsl modem to nic card ) Also... (6 Replies)
Discussion started by: josramon
6 Replies

9. UNIX for Advanced & Expert Users

SCO OpenServer & telnet

I was wondering if anyone knew how I would open up my server so it can be telneted into from other subnets.:confused: (2 Replies)
Discussion started by: cparks73
2 Replies

10. IP Networking

ping and telnet

I can ping other computers in my office. I can telnet other users in my office but i cannot get out of the office network. If i try to go out side of my network it cannot find host. Any ideas? (5 Replies)
Discussion started by: macdonto
5 Replies
Login or Register to Ask a Question

LEARN ABOUT DEBIAN

mrtg-ping-probe

MRTG-PING-PROBE(1)					      General Commands Manual						MRTG-PING-PROBE(1)

NAME

       mrtg-ping-probe - ping probe module for Multi Router Traffic Grapher

DESCRIPTION

       mrtg-ping-probe is a ping probe module for MRTG 2.x.  It is used to monitor the round trip time and packet loss to networked devices.  MRTG
       uses the output of mrtg-ping-probe to generate graphs visualizing minimum and maximum round trip times or packet loss.

       mrtg-ping-probe is not run directly, but is called by MRTG as a helper when it needs to determine ping time to a host.

       Act responsibly: do not use mrtg-ping-probe to ping devices without the owner's permission.  Just imagine if 10,000 people decided to  ping
       your hosts!  mrtg-ping-probe is meant to be used within your network to get round trip time performance figures for your network.

OPTIONS

       To  use	mrtg-ping-probe you need to configure MRTG to call it from within the definition of a target host. This is done in the MRTG config
       file, which is usually /etc/mrtg.conf.

       Here's an example snippet: change the target name and IP address to suit your needs.

       Target[your.target.ping]: `/usr/bin/mrtg-ping-probe 123.456.789.123`
       SetEnv[your.target.ping]: MRTG_INT_IP="123.456.789.123" MRTG_INT_DESCR="ping"
       MaxBytes[your.target.ping]: 100
       AbsMax[your.target.ping]: 200
       Options[your.target.ping]: gauge, growright
       YLegend[your.target.ping]: ping time (ms)
       ShortLegend[your.target.ping]: ms
       Legend1[your.target.ping]: Maximum Round Trip Time in ms
       Legend2[your.target.ping]: Minimum Round Trip Time in ms
       Legend3[your.target.ping]: Maximal 5 Minute Maximum Round Trip Time in ms
       Legend4[your.target.ping]: Maximal 5 Minute Minimum Round Trip Time in ms
       LegendI[your.target.ping]:  Max:
       LegendO[your.target.ping]:  Min:

       Pay close attention to the backticks in the first line which tell MRTG to execute the nominated external program. Note also that  you  need
       to use the "gauge" option, since the results of subsequent ping probes are independant values and not an incrementing counter.

SEE ALSO

       mrtg(1).

       The latest release of mrtg-ping-probe can be found on the web at http://pwo.de/projects/mrtg/

AUTHOR

       This manual page was written by Jonathan Oxer <jon@debian.org>, for the Debian project (but may be used by others).

								  April 14, 2003						MRTG-PING-PROBE(1)