SCO

POST says two drives installed. When taking a look at the last entry at /var/adm/messages though, it tells me a different thing?

Interface Systems, Inc. Cleo SNA PU 2.1 Installed
%cd-rom - - - type=IDE ctlr=sec cfg=mst dvr=Srom->w
%tape - - - type=S ha=0 id=2 lun=0 bus=0 ht=alad
%disk - - - type=S ha=0 id=0 lun=1 bus=0 ht=mdac
%Sdsk - - - cyls=1024 hds=128 secs=32 fts=sdb
mem: total = 786032k, kernel = 21740k, user = 764292k
swapdev = 1/41, swplo = 0, nswap = 782336, swapmem = 391168k
rootdev = 1/42, pipedev = 1/42, dumpdev = 1/41
kernel: Hz = 100, i/o bufs = 6652k

%cpu - 255 - unit=2 family=6 type=Pentium II (D)
%cpuid - - - unit=2 vend=GenuineIntel tfms=0:6:5:2
%fpu - - - unit=2 type=80387-compatible
Tue Oct 27 11:30:06 2009
%disk - - - type=S ha=0 id=1 lun=1 bus=0 ht=mdac
%Sdsk - - - cyls=8750 hds=128 secs=32 fts=sdb
%disk - - - type=S ha=0 id=1 lun=1 bus=0 ht=mdac
%Sdsk - - - cyls=8750 hds=128 secs=32 fts=sdb

Looks like the second drive is installed twice???
Post the contents of /etc/conf/cf.d/mscsi

This is the boot disk (

%disk - - - type=S ha=0 id=0 lun=1 bus=0 ht=mdac
%Sdsk - - - cyls=1024 hds=128 secs=32 fts=sdb

This is the secondary disk
%disk - - - type=S ha=0 id=1 lun=1 bus=0 ht=mdac
%Sdsk - - - cyls=8750 hds=128 secs=32 fts=sdb
%disk - - - type=S ha=0 id=1 lun=1 bus=0 ht=mdac
%Sdsk - - - cyls=8750 hds=128 secs=32 fts=sdb

I don't think that it should print twice, but I no longer have a machine with the same config to look at.



When you add a disk, you must run mkdev hd twice.
The first time the drive is added to the kernel, the second, fdisk and divvy is run, you have to reboot between invocations.

* the licensees of The Santa Cruz Operation, Inc. Such users have the
* right to use, modify, and incorporate this code into other products
* for purposes authorized by the license agreement provided they include
* this notice and the associated copyright notice with any such product.
* The information in this file is provided "AS IS" without warranty.
*
* Scsi configuration master table
*
* ha = device name of SCSI host adapter driver e.g. ad
* attach= device name of attached SCSI device driver e.g. Sdsk
* number= host adapter number
* ID = controller number
* lun = logical unit number
* bus = host adapter bus number
*
*ha attach number ID lun bus
*
wd Srom 1 0 0 0
mdac Sdsk 0 0 1 0
mdac Sdsk 0 1 0 0
alad Stp 0 2 0 0
alad Sdsk 0 10 0 1
mdac Sdsk 0 10 0 1
mdac Sdsk 0 1 1 0

---------- Post updated at 04:10 PM ---------- Previous update was at 04:08 PM ----------

how can i delete/remove this?

*
wd Srom 1 0 0 0 # CD drive
mdac Sdsk 0 0 1 0 # Boot Disk
mdac Sdsk 0 1 0 0 # delete this one
alad Stp 0 2 0 0 # tape drive
alad Sdsk 0 10 0 1 # delete this one, unless you added a disk to the
Adaptec controller with SCSI id 10
mdac Sdsk 0 10 0 1 #delete this one
mdac Sdsk 0 1 1 0 #this is the secondary drive

Edit this file with a text editor, and relink the kernel, and reboot.

Run mkdev hd and enter the same data for mdac 0 1 1 0
This should start fdisk and divvy.

I think I did it wrong, again. Here were the results:

What is the LUN of this device?
Press <Return> to use the default: 0
Select 0-7, or h for help, or q to quit: 0

You are about to add the following SCSI device:

Host
Adapter Adapter
Type Device Number ID LUN BUS
----------------------------------------------
mdac Sdsk 0 1 0 1

Update SCSI configuration? (y/n) y

The SCSI configuration file has been updated.
\nA new kernel must be built and rebooted before disk configuration can continue
. Would you like to relink at this time? (y/n) \c
y

The UNIX Operating System will now be rebuilt.
This will take a few minutes. Please wait.

Root for this system build is /
idmkreg: can not locate or open 'Sdsk/device.dat'

*
wd Srom 1 0 0 0
mdac Sdsk 0 0 1 0

alad Stp 0 2 0 0


mdac Sdsk 0 1 1 0

mdac Sdsk 0 1 0 1
bash-2.03#

---------- Post updated at 09:03 AM ---------- Previous update was at 08:45 AM ----------

deleted the one in red & rebuilt the kernel.....tried this.....but this is pointing to a specific disk (in red)??

Enter the prefix of the SCSI host adapter that supports this device
or press <Return> for the default: 'mdac'
Enter h for a list of host adapters or enter q to quit:

Which 'mdac' SCSI host adapter supports this device?
Select 0-4, or enter q to quit: 0

The Host Adapter parameters will be automatically configured

What SCSI Bus is this device attached to?
Press <Return> to use the default:0
Select 0-n, or h for help, or q to quit: 0

What is the Target ID for this device?
Select 0-15, or h for help, or q to quit: 1

What is the LUN of this device?
Press <Return> to use the default: 0
Select 0-7, or h for help, or q to quit: 1
\nDisk already configured as disk number 1 (/dev/dsk/1s0)
\nDuring installation you may choose to overwrite all
or part of the present contents of your hard disk.
\nDo you wish to continue? (y/n) \c

---------- Post updated at 09:15 AM ---------- Previous update was at 09:03 AM ----------

I don't know if this is the right one? Would this be my new 17GB hard drive that I need?? Appreciate more. Thanks.

bash-2.03# divvy /dev/hd3a
+-------------------+------------+--------+---+-------------+------------+
| Name | Type | New FS | # | First Block | Last Block |
+-------------------+------------+--------+---+-------------+------------+
| | HTFS | no | 0 | 0| 15997967|
| | NOT USED | no | 1 | -| -|
| | NOT USED | no | 2 | -| -|
| | NOT USED | no | 3 | -| -|
| | NOT USED | no | 4 | -| -|
| | NOT USED | no | 5 | -| -|
| | NOT USED | no | 6 | -| -|
| hd3a | WHOLE DISK | no | 7 | 0| 15999999|
+-------------------+------------+--------+---+-------------+------------+
15997968 1K blocks for divisions, 2032 1K blocks reserved for the system

n[ame] Name or rename a division.
c[reate] Create a new file system on this division.
t[ype] Select or change filesystem type on new filesystems.
p[revent] Prevent a new file system from being created on this division.
s[tart] Start a division on a different block.
e[nd] End a division on a different block.
r[estore] Restore the original division table.

Enter your choice or q to quit:

That's it, create one new HTFS partition, then follow the instructions in scoadmin->filesystems to mount.

Code:

15997968 1K blocks for divisions, 2032 1K blocks reserved for the system

Multiplies out to about 17gb

Thanks. I now want to remove the previous mount point /u1 from the system. How do I do it? I tried to define the new drive as /u1, got a message instead of /u1 in use. I have already removed the u1 directory. Am I missing something? Appreciate more. Thanks.