|
|
Separate HDD test using RAID controller
|
|
|
|
raidctl(1M) System Administration Commands raidctl(1M) NAME
raidctl - RAID hardware utility SYNOPSIS
raidctl -c disk1 disk2 raidctl -d disk1 raidctl [-f] -F filename controller... raidctl -l [controller...] DESCRIPTION
The raidctl utility creates, deletes, or displays RAID volumes of the LSI1030 HW Raid controllers that include RAID support. The utility also updates firmware/fcode/BIOS for both RAID and non-RAID controllers. The raidctl utility requires privileges that are controlled by the underlying file-system permissions. Only privileged users can manipulate the RAID system configuration. If a non-privileged user attempts to create or delete a RAID volume, the command fails with EPERM. Without options, raidctl displays the current RAID configuration on all exisiting controllers. OPTIONS
The following options are supported: -c disk1 disk2 (for on board) Create a mirror using disk1 and disk2. Replace the contents of disk2 with the contents of disk1. Specify disk1 and disk2 in canonical form, for example, c0t0d0. When you create a a RAID volume, the RAID volume assumes the identity of the first target in the disk pair (disk1). The second target (disk2) disappears from the system. Therefore, the RAID volume appears as one disk. To have a successful RAID creation, there must not already be a RAID configuration present on the specified controller. Additionally, the secondary disk must not be mounted, as it has all its data erased and replaced with the primary disk's data. -d disk1 (for on board) Delete the RAID volume specified as disk1. Specify disk1 in canonical form, for example, c0t0d0. -f (for HBA) Force an update. Do not prompt. -F filename controller (for HBA) Update the firmware running on the specified controller (controller). -l [controller ...] (for on board) List the system's RAID configuration. If controller is specified, list RAID configurations for controller. Output from the -l lists the following information: RAID Volume Displays logical RAID volume name. RAID Status Displays RAID status as either RESYNCING (disks are syncing), DEGRADED RAID is operating with reduced functionality), OK (operating optimally), or FAILED (non-functional). RAID Disk Displays RAID disk name. Disk Status Displays disk status as either OK or FAILED. EXAMPLES
Example 1: Creating the RAID Configuration The following command creates the RAID configuration: # raidctl -c c0t0d0 c0t1d0 RAID Volume 'c0t0d0' created Example 2: Displaying the RAID Configuration The following command displays the RAID configuration: # raidctl RAID RAID RAID Disk Volume Status Disk Status ---------------------------------------- c0t0d0 RESYNCING c0t0d0 OK c0t1d0 OK Example 3: Deleting the RAID Configuration The following command deletes the RAID configuration: # raidctl -d c0t0d0 RAID Volume 'c0t0d0' deleted Example 4: Updating Flash Images on the Controller The following command updates flash images on the controller: # raidctl -F lsi1030.fw 0 Update flash image on controller 0? (y/N): y Flash updated successfully EXIT STATUS
The following exit values are returned: 0 Successful completion. 1 Invalid command line input. 2 Request operation failed. ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWcsu | +-----------------------------+-----------------------------+ SEE ALSO
attributes(5) System Administration Guide: Basic Administration SunOS 5.10 17 Aug 2004 raidctl(1M)
