Adding Legacy SCSI tape to Ent Rel 6 64

10 More Discussions You Might Find Interesting

1. Solaris

Legacy Ultra60 with Solaris 5.7 SCSI device reverse engineering

I'm looking for help with a legacy system. I have some obsolete equipment connected to an Ultra 60 running Solaris 5.7 with the binary for a 32 bit driver. The driver is rejected by newer versions of solaris, which run 64 bit kernels. I hope to reverse engineer the driver so that I can...

2. Hardware

Help with scsi tape drive problem

I've had a scsi hard drive, scsi tape drive, and cd rom working off an adaptec 29160 controller. Everything worked great until a few days ago. I begin getting tar format errors (running sco 5.0.6) on the tape drive and occasionally the entire system would hang up while trying to access data on...

3. Solaris

Restoring dump from tape to SCSI disk

Hi Gurus, I need help. Mine is an Ultra 10 machine running on solaris 7. Problem with solaris 7 is, it can no longer recognize IDE disks greater that 10GB. My workaround is ro use an external SCSI disk since it is recognizable with solaris 7. I backup my filesystems (residing on the IDE...

4. SCO

SCSI tape on Openserver 5.0.6

Running into an interesting problem here: I can add the tape with "mkdev tape" the system appears to see it wwith "hwconfig -hc" however a 'tape status /dev/rStp0' says 'no device found', checked the configuration files in 'etc' all appear to be correct. Any suggestion appreciated Jim

5. SCO

Installing SCSI Tape drive

Hello, I'm having some issues with installing SCSI tape drive on SCO 5.0.6 hardware config shows the following adapters %adapter 0xE800-0xE8FF 10 - type=alad ha=0 bus=0 id=7 fts=sto %adapter 0x0170-0x0177 15 - type=IDE ctlr=secondary dvr=wd %adapter - 3 - ...

6. HP-UX

Modules Required For SCSI Tape?

I've got an HP9000 server and I'm trying to hook up a tape drive to it. When I go into "SAM-->Peripheral Devices-->Tape Drives", the tape isn't listed. I then choose to "ADD" a drive, and I get the following error. I know I need to install the "stape" module, but for some reason even that...

7. Solaris

mounting an external scsi tape drive

hi- I just installed a quad gigaswift ethernet scsi card to my sunblade 150. I checked with the docs, and got all of the required drivers on the box. Now, I'm trying to mount an external scsi tape drive with no luck. I set the scsi address on the external drive to 0. Here's what I'm coming...

8. UNIX for Dummies Questions & Answers

SCSI Tape Error

When I am trying to read any tape I getthe following message on my screen: "stp: Error on SCSI tape=0 (ha=0 id=6 lun=0)" Does anybody know how to solve this problem and what the message means. I already have rebooted the server and cleaned the heads of the tape unit. HELP!!!!

9. UNIX for Dummies Questions & Answers

Scsi tape drive.

I'm running SCO OS 505 on a Compaq proliant 1600, and my tape drive will just not work. It was working properly and whent to Sh?ts when I tried to get the cd rom working. I have uninstalled any configured tape drive and rebooted and then configured a tape drive and rebooted still nothing. I'm...

10. UNIX for Dummies Questions & Answers

Scsi Tape Message?????

I do daily backups running a shell script. I use 6 different tapes for each day (monday through saturday). First of all I insert the tape then run the script and when it finished I eject the tape. Until today I was doing this with no problem, but now I'm getting this message constantly (even...

LEARN ABOUT OPENSOLARIS

lsimega

lsimega(7D)                                                                                                                            lsimega(7D)

NAME

       lsimega - SCSI HBA driver for LSI MegaRAID 320-2x SCSI  RAID Controller

       The lsimega SCSI RAID  host bus adapter driver is a SCSA-compliant nexus driver that supports LSI MegaRAID 320-2x SCSI RAID devices.

       The  lsimega  driver supports  standard  functions provided by the SCSA interface, including RAID disk I/O  and  passthrough I/O to support
       SCSI tape and CDROM.

DRIVER CONFIGURATION

       The lsimega.conf file contains no user configurable parameters. Please configure your hardware through BIOS.

       The LSI MegaRAID 320-2x device can support up to 40 logic drivers. Note that BIOS numbers the logic drives as  1  through  40,  however  in
       Solaris these drives are numbered from 0 to 39.

       See attributes(5) for a description of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE         |      ATTRIBUTE VALUE        |
       +-----------------------------+-----------------------------+
       |Availability                 |                             |
       +-----------------------------+-----------------------------+

FILES

       /kernel/drv/lsimega

           32-bit ELF kernel module.

       /kernel/drv/amd64/lsimega

           64-bit kernel module ( only).

       /kernel/drv/lsimega.conf

           Driver configuration file (contains no user-configurable options).

       prtconf(1M),   attributes(5),  amr(7D),  scsi_hba_attach(9F),  scsi_sync_pkt(9F),  scsi_transport(9F),  scsi_inquiry(9S),  scsi_device(9S),
       scsi_pkt(9S)

       Small Computer System Interface-2 (SCSI-2)

                                                                   20 April 2005                                                       lsimega(7D)

Red Hat