On the machine where this port needs to be opened, execute the below commands:
If you have an external firewall sitting in between these two machines, you have to follow the instructions/manuals for that firewall.
Typically, using telnet you can determine whether a port on remote host is open or blocked by a firewall by the error message it throws.
For example:
Unable to connect to remote host: No route to host => this type of error message is seen in case of a blocked port
Unable to connect to remote host: Connection timed out => this is seen in case of a closed port
Last edited by admin_xor; 09-20-2012 at 06:00 PM..
hi,
i would like to create a bash script that check which port in my Linux server are closed (not in use) from a specific range, port range (3000-3010).
the print output need to be only 1 port, and it will be nice if the output will be saved as a variable or in same file.
my code is:
... (2 Replies)
Hi Expert,
Anybody can figure it out on how to generate new port base on my last port let say my last port var1=124 and increment for new port 125,126 but this new two ports need to look at first if this port is not in used by any service, if the port is in used add 1 to new port and if in used... (6 Replies)
Hello,
I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build.
The first part is what confuses me -the cabling.
I am coming from a Windows machine (w/appropriate... (5 Replies)
i want to kill a tcp connection by killing its pid
with netstat -an i got the tcp ip connection on port 5914
but when i type ps -a or ps-e there is not such process running on port 5914
is it possible that because i do not log on with proper user account i can not see that process running? (30 Replies)
Hi,
I am trying to set up a dev environment and I have Ubuntu server (10.16.1.92) and a CentOS VM (10.16.3.235) on this. On the CentOS I have a program running on port 5433. Now my problem is that I am unable to telnet this port from another Windows server whereas I can telnet port 22 from... (5 Replies)
Hi Everyone,
In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
hi i have a sun machine which has one hba 2ports;
out of which one port says it is not connected
# luxadm -e port
/devices/pci@1d,700000/SUNW,qlc@1/fp@0,0:devctl CONNECTED
/devices/pci@1d,700000/SUNW,qlc@1,1/fp@0,0:devctl NOT CONNECTED
but both... (9 Replies)
hey everyone,
i have just finished configuring apache 2.0 with the php and pgsql modules installed on it.. httpd.conf is configured and everything is running right after a lengthy bit of reading and struggling with the system.. the only problem left is how do i enable the port that i would access... (3 Replies)