Hi all, I'm fairly new to Veritas on Linux machines and have a disk group with 64 disks that we are migrating to 64 new disks. This means I'll be mirroring the old to the new. So my question is this - is there a way to mirror a specific volume to a range of disks as opposed to listing each disk by name?
Hi,
I am on Solaris 10 server which is running Veritas. It's E420 server with two drives. I don't know much about Veritas. The other guy who works on this, on vacation this week. :-) Any way, looks like I have hard drive issue on the server.
When I do iostat -E. I see this.
sd0... (4 Replies)
Hi All,
We are using Solaris 10 x86, and Veritas Storage Foundation Software version 6.0.1 and faced the following issues after mirroring and during boot from mirror.
1) VTOC has been changed after mirroring the rootdisk with this command - " /opt/VRTS/bin/vxrootmir <disk to be mirrored>".... (0 Replies)
Hi all
I wish to undo the mirroring for root and update the Solaris version from 8 to 10. Since i am lack of knowledge and experience on this, hope you all can help me double check the step and correct me.
Existing disk groups details
root@leo # vxdg list
NAME STATE ID... (3 Replies)
Hello!
I have setup root mirror (d0) and swap mirror (d1) with 2 sub mirrors each
Right now when I run metastat | grep -i progress
it is resyncing
but when I do an echo | format, I don't get the md info
I also changed the information in /etc/vfstab
after the mirrors sync...... (8 Replies)
Hi there,
My task is to replace the two 73 G disks with two 143 G disks , which has vxvm 4.1 running on it. I would like to know whether the steps iam following are correct.
1. Break the sub-disks, plexes of the root mirror.
2. Remove the sub-disks,plexes of the root mirror.
3. Remove one of... (10 Replies)
Can someone tell me what command it is to list the disk in a specified disk group. I dont want to see disks in all groups, just the disk in a specified group. (2 Replies)
vxdg -g mktdg adddisk mktdg02=c0b0t3d0
i know this command adds c0b0t3d0 to the disk group mktdg but what i dont know is what the significance of mktdg02 is.
i mean, what is it? what does it stand for?? (1 Reply)
vxdiskadd(1M)vxdiskadd(1M)NAME
vxdiskadd - add one or more disks for use with Veritas Volume Manager
SYNOPSIS
vxdiskadd disk_address_pattern_list
DESCRIPTION
The vxdiskadd utility configures disks for use by Veritas Volume Manager (VxVM). Disks must already have been formatted. vxdiskadd
prompts the user for a disk group name and disk name for the disks. If no disk group name specified, the disks will be left as unassigned
replacement disks for future use. A new disk group may be created that will become the disks' disk group. If a disk group is specified for
the disks, the user is prompted for whether the disks should be designated as spares for the disk group. For new disks, all space on the
disk becomes free space in the disk's disk group. vxdiskadd interactively allows initialization to be done for all the disks specified or
allows the user to ask to make the decision for each disk individually.
One or more disks may be specified with a disk_address_pattern_list. The basic form of a disk address is c#t#d#. Any leading portion of
this address may be specified to indicate that all disks that match that leading portion should be used. For example c2t0 may be used to
specify all disks on controller 2, target 0. More than one disk address or address pattern may be specified on the command line. In case
of enclosure-based names, the disk address will be of the form enclosurename_diskno. The enclosurename indicates that all disks in the
specified enclosure are used. For example, emc1_ is used to specify all disks in the enclosure emc1. The word all may be used to specify
all disks on the system. Disk address names relate directly to device node names in the /dev/dmp and /dev/rdmp directories. Here are more
examples:
all: all disks
c3 c4t2: all disks on controller 3 and controller 4, target 2
c3t4d2: a single disk (in the c#t#d# naming scheme)
xyz_0 : a single disk (in the enclosure based naming scheme)
xyz_ : all disks on the enclosure whose name is xyz
The files /etc/vx/cntrls.exclude, /etc/vx/disks.exclude and /etc/vx/enclr.exclude may be used to exclude controllers or disks from use by
vxdiskadd. Each line of cntrls.exclude specifies the address of a controller to exclude, for example, c2. Each line of disks.exclude spec-
ifies a disk to exclude, for example, c0t3d0. Each line of enclr.exclude specifies the name of an enclosure to exclude, for example, enc0.
All courses of action that do not involve clear failure conditions require prompts from the user, with defaults supplied as appropriate.
Help is made available at every prompt. Entering ? in response to a prompt displays a context-sensitive help message.
OPERATIONS
Reconnecting a drive that was temporarily inaccessible
This situation is detected automatically by noting that the specified drive has a disk ID that matches a disk media record with no
currently associated physical disk. After reconnection, any stale plexes referring the disk are reattached, and any stopped volumes
referring the disk are restarted. This reattach action is performed by calling the vxrecover utility.
Initialization of a disk with reserved regions
Initialization of the disk is performed by calling vxdisksetup.
Adding a disk to an existing disk group
This operation can be performed independently of the initialization of the disk drive. The operation adds the disk to the group so
that its storage is added to the free space pool in that disk group. The vxassist utility can subsequently allocate from that free
space.
Creation of new disk groups in which to import a new disk
If disks are added that are required to be put into a disk group that does not exist, the option of creating the disk group is
offered.
Hardware-Specific Note
Some environments provide guidelines to optimize VxVM's interaction with intelligent storage systems. If these guidelines are present, VxVM
follows the guidelines when adding disks to disk groups. If the operation fails due to these guideline(s), you are prompted to use the
force option. The force option ignores any such storage-specific guidelines.
FILES
/etc/vx/cntrls.exclude Specifies the address of controllers to exclude from vxdiskadd operations.
/etc/vx/disks.exclude Specifies the address of disks to exclude from vxdiskadd operations.
/etc/vx/enclr.exclude Specifies the address of enclosures to exclude from vxdiskadd operations.
NOTES
EFI disks cannot be added to a disk group that is compatible with the Cross-platform Data Sharing (CDS) feature, nor can they be formatted
as CDS disks.
SEE ALSO vxassist(1M), vxdisk(1M), vxdiskadm(1M), vxdisksetup(1M), vxintro(1M), vxrecover(1M)VxVM 5.0.31.1 24 Mar 2008 vxdiskadd(1M)