Hi,
How can I config iptables to allow port forwarding from one WAN interface to second lan interface .
In my system I have one wan interface 61.93.204.56 (eth0),and lan interface 10.2.1.52(eth1)
I want to make port forward port no 22 from 61.93.204.56 to
port 22 , 10.2.1.52 , tcp and udp
I try below command but all are not work
Please advice how can I make it work .
And how can I open debug for above iptables rule and see what is wrong ???
Please advice ..
Hello All,
I would like to ask you very kindly with /etc/sysconfig/iptables file
I have to setup port forwarding on RHEL6 router. Users from public network must be able to ssh to servers in private network behind RHEL6 router. Problem is that servers in private network must be isolated.
My... (2 Replies)
Hello Gurus,
I have configured port forwarding at router.
But after configuration I am not able to connect the computer from outside/Over internet/Remote desktp from other computer.
Could you please advice?
Thanks-
Pokhraj (2 Replies)
Hi experts,
We have windows machine ( A ) in one network & 2 Linux Servers ( B & C ) in another network. There is a firewall between these 2 networks and SSH (TCP/22) & HTTPS (TCP/443) are allowed from A to B only (but not to C). There is no personal firewall / iptables running on any machine.... (1 Reply)
Hello,
I have a routeur linksys (192.168.1.1 ) a firewall (192.168.1.55 IN ----> 192.168.2.254 OUT) which using iptable
I want to acces to an equipment (lorex video camera serveur 192.168.2.44) which using an ddns service on the port 9000
So i don t know which redirection a will do on the... (2 Replies)
Hi Linux/Unix Guru,
I am setting Linux Hopping Station to another different servers.
My current config to connect to another servers is using different port to connect.
e.g
ssh -D 1080 -p 22 username@server1.com
ssh -D 1081 -p 22 username@server2.com
Now what I would like to have... (3 Replies)
Hi; I have the following issue:
I have a Solaris server running an old applications which connects to an http server in other server at certain port. The thing is that the http server has changed its ip and port and the addres in the app is hard coded and touching the app by now is out of the... (0 Replies)
Hi
I want to set up port forwarding from one network to another network. I already have this configured on the Linux box using iptables.
iptables -t nat -A PREROUTING -p tcp -i eth1 --dport 1521 -j DNAT --to 10.218.146.230
iptables -A FORWARD -p tcp -i eth1 -d 10.218.146.230 -j ACCEPT
... (2 Replies)
Hi,
I have to install an application that has a built in tftp server. Tftp comes in on port 69. As i am not installing this application as a root user i am running into trouble because only the root user can listen to ports < 1024. So changing the port i listen to to one greater than 1023 isn't... (1 Reply)