After onsite checked, I found the problem was caused by external storage. There is a virtual device which would not be assigned a LUN to it. When system boot, it will generated the Buffer IO error message.
Thanks all for your support and tips.
The solution is:
Remove the virtual device from the storage configuration tools. rescan the devices.
Hi there
After making a backup copy of it sometimes happens that when I want to unmount an NFS indicates the error:umount: /path_mount busy: Device busy (Error 16)
if I run lsoff, I can not find the process that is blocking the application.
I'm using OpenServer 5.0.2c as one NFS server ... (14 Replies)
Below is the error being repeated on my Solaris 9 Sun-Fire-V890 machine.
SAN team confirmed as everything is fine from their end. I did google and found that some people say its a known Oracle bug when you have Oracle 10G installed on your system but I kind of disagree with them. Please see below... (2 Replies)
I've a Sun V440 machine, and it's running solaris 10 .. for some reason i need to install a fresh copy of solaris 10. for that i've prepared solaris 10 dvd but surprisingly i found there is no any dvd rom on this machine, so i've took a dvd rom from a V240 machine and inserted on V440.
after... (3 Replies)
Hi Everyone,
I am trying to remove a directory:
$ rm -rf directory_name/
rm: cannot remove `directory_name/filename': Device or resource busy
What does this mean, and why can't I remove these files? I already tried moving into the directory, and removing the files individually, but I... (7 Replies)
Dear experts,
I'm trying to write a script to calculate the usage of Log Archive in a directory, so if it gets to a point where the directory size is 60%, then send out an FYI.. email. So if then it reaches to 80%, move the logs from that directory.
I have written the script as follow but... (10 Replies)
Dear All,
I was having powerpath 5.2 on SUN server with SVM connected to CLARIION box.Please find the following output :
root # powermt display dev=all
Pseudo name=emcpower3a
CLARiiON ID=CK200073400372
Logical device ID=60060160685D1E004DD97FB647BFDC11
state=alive; policy=CLAROpt;... (1 Reply)
I'm trying to install Redhat LInux AS 4 update 4 on an IBM x306 series server. I keep getting following error:
"No Drives Found. An error has occurred - no valid devices were found on which to create new file systems. Please check your hardware for the cause of this problem."
I called IBM and... (2 Replies)
PARTX(8) System Administration PARTX(8)NAME
partx - tell the kernel about the presence and numbering of on-disk partitions
SYNOPSIS
partx [-a|-d|-P|-r|-s|-u] [-t type] [-n M:N] [-] disk
partx [-a|-d|-P|-r|-s|-u] [-t type] partition [disk]
DESCRIPTION
Given a device or disk-image, partx tries to parse the partition table and list its contents. It can also tell the kernel to add or remove
partitions from its bookkeeping.
The disk argument is optional when a partition argument is provided. To force scanning a partition as if it were a whole disk (for example
to list nested subpartitions), use the argument "-" (hyphen-minus). For example:
partx --show - /dev/sda3
This will see sda3 as a whole-disk rather than as a partition.
partx is not an fdisk program - adding and removing partitions does not change the disk, it just tells the kernel about the presence and
numbering of on-disk partitions.
OPTIONS -a, --add
Add the specified partitions, or read the disk and add all partitions.
-b, --bytes
Print the SIZE column in bytes rather than in human-readable format.
-d, --delete
Delete the specified partitions or all partitions.
-g, --noheadings
Do not print a header line with --show or --raw.
-l, --list
List the partitions. Note that all numbers are in 512-byte sectors. This output format is DEPRECATED in favour of --show. Do not
use it in newly written scripts.
-n, --nr M:N
Specify the range of partitions. For backward compatibility also the format M-N is supported. The range may contain negative num-
bers, for example --nr -1:-1 means the last partition, and --nr -2:-1 means the last two partitions. Supported range specifications
are:
M Specifies just one partition (e.g. --nr 3).
M: Specifies the lower limit only (e.g. --nr 2:).
:N Specifies the upper limit only (e.g. --nr :4).
M:N Specifies the lower and upper limits (e.g. --nr 2:4).
-o, --output list
Define the output columns to use for --show, --pairs and --raw output. If no output arrangement is specified, then a default set is
used. Use --help to get list of all supported columns. This option cannot be combined with the --add, --delete, --update or --list
options.
-P, --pairs
List the partitions using the KEY="value" format.
-r, --raw
List the partitions using the raw output format.
-s, --show
List the partitions. The output columns can be selected and rearranged with the --output option. All numbers (except SIZE) are in
512-byte sectors.
-t, --type type
Specify the partition table type.
--list-types
List supported partition types and exit.
-u, --update
Update the specified partitions.
-S, --sector-size size
Overwrite default sector size.
-v, --verbose
Verbose mode.
-V, --version
Display version information and exit.
-h, --help
Display help text and exit.
EXAMPLES
partx --show /dev/sdb3
partx --show --nr 3 /dev/sdb
partx --show /dev/sdb3 /dev/sdb
All three commands list partition 3 of /dev/sdb.
partx --show - /dev/sdb3
Lists all subpartitions on /dev/sdb3 (the device is used as whole-disk).
partx -o START -g --nr 5 /dev/sdb
Prints the start sector of partition 5 on /dev/sdb without header.
partx -o SECTORS,SIZE /dev/sda5 /dev/sda
Lists the length in sectors and human-readable size of partition 5 on /dev/sda.
partx --add --nr 3:5 /dev/sdd
Adds all available partitions from 3 to 5 (inclusive) on /dev/sdd.
partx -d --nr :-1 /dev/sdd
Removes the last partition on /dev/sdd.
SEE ALSO addpart(8), delpart(8), fdisk(8), parted(8), partprobe(8)AUTHORS
Davidlohr Bueso <dave@gnu.org>
Karel Zak <kzak@redhat.com>
The original version was written by Andries E. Brouwer <aeb@cwi.nl>.
ENVIRONMENT
LIBBLKID_DEBUG=all
enables libblkid debug output.
AVAILABILITY
The partx command is part of the util-linux package and is available from Linux Kernel Archive <https://www.kernel.org/pub/linux/utils
/util-linux/>.
util-linux December 2014 PARTX(8)