In Solaris the administrator has to update /kernel/drv/sd.conf file to tell the sd driver to scan for a broader range of scsi devices.
Can someone please tell me what file needs to be update in Redhat Linux 5 for the same.
Second part of the question is WWN for HBA's can be found (atleast in my situation) in /sys/class/fc_host/host*/port_name, but where can I find the WWN for the SP (Storage Processor) on SAN from which this server is drawing the LUNS from.
As long as the driver for the HBA has been loaded, then you should not need to update anything further unless you are using multipath drivers.
For that, you should update the multipath configuration files according to how your vendor specifies they should be modified.
If you need to rescan for LUNs on an active machine, there are a few ways. One of which is to find the script (available for free online) rescan-scsi-bus.sh
Alternately you can echo '- - -' to /sys/class/scsi_host/host<num>/scan
Hi
I have a system running uname -a
Linux cmoveldb02 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux and I was told by the NetApp Admin that he has provided 5 LUNs of 1Tb, 200Gb and remaining 3 of 300Gb, but I am not able to see the new LUNs.
I have... (4 Replies)
Hi everyone,
We have the below sun Operating system, Now our storage team have Create a 500GB LUN for this server, How can i scan and mount the shared LUN ? Could anyone help me to resolve this issue.
SunOS my_hostname.com 5.10 Generic_150400-09 sun4v sparc sun4v
Update:
--------
I... (9 Replies)
Hello Experts,
I have few doubts on RAID 5 with LUNs carved as STRIPE and CONCAT
RAID 5 = STRIPE + Parity mirroring
I would like to know if the LUNs carved are CONCATE from RAID 5 disk array. Are the I/Os are spread accross the disks within the RAID 5 Array? And if I do carve STRIPED... (1 Reply)
Hi team,
2E493F13 0612155010 P H dac0 ARRAY OPERATION ERROR
2E493F13 0612155010 P H dac0 ARRAY OPERATION ERROR
2E493F13 0612155010 P H dac0 ARRAY OPERATION ERROR
2E493F13 0612154910 P H dac0 ARRAY OPERATION ERROR
2E493F13 0612154910 P H dac0 ... (4 Replies)
hi friends how we can create luns in A1OOO storage ..plzhelp its very urgent
when ever i am connect to A1000 raid controller through laptop with console cable with the help of hyperterminal..i isued serial port parameters which i mentioned below..
Set serial port parameters to:
�... (1 Reply)
Hi
Iīm new to san and lunīs
I see the disks, but are not able to mount them
bash-3.00# mountall
checking ufs filesystems
/dev/rdsk/c3t5006016930601F86d0s6: I/O error
Can't open /dev/rdsk/c3t5006016930601F86d0s6: I/O error
/dev/rdsk/c3t5006016930601F86d0s6: CAN'T CHECK FILE SYSTEM.... (1 Reply)
Hi All,
I have these config on my old ssa.
Vg4 22GB (pps 256)
Vg2 88GB (pps 128)
Vg3 22GB (pps 256)
Vg8 88GB (pps 128)
Vg13 106GB (pps 32)
Vg12 106GB (pps 32)
Vg10 54GB (pps 64)
Vg11 54GB (pps 64)
When I create a lun on my san do I need to specify the same pps. If yes,... (1 Reply)
Hi, This is my first post and I hope I can present my questions the right way. I am going to be asked to create logical volumes for a Hitachi SAN device on a New HP 11 server. Currently, They are running their data on a EMC (prod server). They are looking to convert the data and filesystems over to... (3 Replies)
