I have my HP Data Protector installed on the backup server.
I want to connect this backup server with the client server through
telnet port 5555 like below
telnet < ipaddress of client> 5555
But when I try like this , it says ...Connection refused ...unable to connect to remote host.
I tried to open the port 5555 in the client machine...which I could not.
Kindly help me in opening the port in client machine.
hi guys
i have a simple question !
i have two ips . a valid and internal(172.16.11.2)
i want to use port forwarding to forward any request to valid IP port 8001 to internal ip port 80 .
i use this rule :
sysctl -w net.ipv4.ip_forward=1
iptables -t nat -A PREROUTING -p tcp... (1 Reply)
Hello,
I have following issue:
traceroute connection works to given address(ip + port) but telnet(and other network tools) do not. How it is possible?
telnet 10.150.184.225 443
Connection refused
tracert -T -p 443 10.150.184.225
traceroute to 10.150.184.225 (10.150.184.225), 30 hops... (3 Replies)
I'm facing some strange HP-UX behavior. I have a small SAN with one HP server, two Cisco SAN switches and one HP tape library connected. When I issues port reset, syslog shows the following:
Oct 15 07:34:51 terumos-bckp-srv2 vmunix: Target path (class=tgtpath, instance=12) has gone online. ... (2 Replies)
Hi guys.
Opening port 5555 for Data Protector on Linux box but can't telnet to it.
Modified /etc/services to have:
omni 5555/tcp # DATA-PROTECTOR
But when I telnet into it:
telnet <ip address> 5555
Doesn't connect
Need help figuring out what I need to do to open this port.
... (0 Replies)
Hi,
In my application,I need to monitor the devices connected through serial port in solaris sparc 9 OS.I used c and java code for it and I am able to do the same but the problem comes when I restart the system and the open my application and try to monitor it.but I m unable to monitor the... (2 Replies)
Hi,
I am working with Sun Solaris 9 Sparc,Sun-Blade-100.In my application,I need to monitor the UPS using Serial port.
When I am using JRE 1.4 in my application,I am able to monitor it but when I am upgrading the JRE version from 1.4 to JRE1.6. I am not able to monitor the UPS.It is showing the... (1 Reply)
playing around with a command-line restore from omniback...anyone ever play with omnir?
I have the following test backup:
$ omnidb -session 2008/02/01-6
Object Name Object Type Object Status... (1 Reply)
Hi,all:
I want to boot an IA unix box from network, I am sure I set the DHCP and boot server, but it still failed !
It says : Client MAC Address: 00 18 FE 28 91 82 .....-
PXE-E16: Valid PXE offer not received.
Load of Core LAN Gb A failed: Not Found
I use the nettl command to trace the UDP... (0 Replies)
Hi, Haveing a little trouble with data protector (5.5) on HP-UX (11.11, 11.23)
under Xwindows Chameleon UNIX 97 (7.0 - its a old version)
I am trying to get the GUI for DP up and running on a HP-UX cell manager and I have the following problem.
The GUI starts up with no errors that I can... (2 Replies)
ipsec_policy(1M)ipsec_policy(1M)NAME
ipsec_policy - HP-UX IPSec policy tester
SYNOPSIS
src_ip_addr] dst_ip_addr] src_port] dst_port]
DESCRIPTION
is a utility program that allows the HP-UX IPSec Administrator to query the active policy database to determine which host IPsec Policy
will be used for an IP packet based on a packet descriptor, or 5-tuple, and the direction. The packet descriptor consists of a source IP
address, source port number, destination IP address, destination port number, and network protocol. If the host policy uses dynamic key
Security Associations, also displays the authentication record and IKE policy selected. If the authentication record contains two values
for the IKE (KMP) version, uses the first value and selects the IKE policy according to this value. If the host policy uses a tunnel pol-
icy, also displays the tunnel policy used.
requires the optional HP-UX IPSec software.
You must have superuser capabilities to run the utility.
Command-Line Arguments
recognizes the following command-line options and arguments:
Specifies the source IP address
(src_ip_addr) of the packet. If the direction is out, this is the local IP address. If the direction is in, this is the
remote IP address.
Acceptable values: An IPv4 address in dotted-decimal notation or an IPv6 address in colon-hexadecimal notation.
Default: If you omit the source address and destination address uses the wildcard IPv4 address If you omit the source address
but specify the destination address, uses the wildcard IPv4 address or wildcard IPv6 address according to the type of IP
address you specify for the destination address.
Specifies the source port number
(src_port) of the packet. If the direction is out, this is the local port number. If the direction is in, this is the remote
port number.
Range: An unsigned integer in the range 1 - 65535.
Default: Any port number(0).
If you are making a query for an outbound client-server application where the source port number can be any user-space port,
specify a "dummy" user-space port number for the source port, such as 65535.
Specifies the destination IP address
(dst_ip_addr) of the packet. If the direction is out, this is the remote IP address. If the direction is in, this is the
local IP address.
Acceptable values: An IPv4 address in dotted-decimal notation or an IPv6 address in colon-hexadecimal notation.
Default: If you omit the source address and destination address uses the wildcard IPv4 address If you omit the destination
address but specify the source address, uses the wildcard IPv4 address or wildcard IPv6 address according to the type of IP
address you specify for the source address.
Specifies the destination port number
(dst_port) of the packet. If the direction is out, this is the remote port number. If the direction is in, this is the local
port number.
Range: An unsigned integer in the range 1 - 65535.
Default: If omitted, any port number is assumed.
If you are making a query for an inbound client-server application where the client port number can be any user-space port,
specify a "dummy" user-space port number for the destination (server) port such as 65535.
Specifies the
network_protocol of the packet.
Acceptable values: (Mobile IPv6 Mobility Header), or
Default: Any network protocol(0).
Specifies the
direction for the packet specification.
Acceptable values: or
Default:
RETURN VALUE
Upon successful completion, returns 0; otherwise it returns 1.
ERRORS
fails if any of the following conditions is encountered:
o Command used incorrectly - Usage message is returned.
o HP-UX IPSec subsystem is not running - returns the following message:
EXAMPLES
IPv4 Example
On system A you want to determine which host IPsec policy will be used for outbound telnet traffic to system B or when local users telnet
to system B. Since the telnet clients on system A will use any unused user-space TCP port and the telnet daemons on system B will use TCP
port 23, you could use the following command:
On system A you want to determine which host IPsec policy will be used for inbound telnet traffic from system B or when users on system B
telnet to the local system. Since the local telnet daemons will use TCP port 23 and clients on system B will use any unused user-space TCP
port, you could use the following command:
IPv6 example
On system A you want to determine which host IPsec policy will be used for outbound telnet traffic to system B or when local users telnet
to system B. Since the telnet clients on system A will use any unused user-space TCP port and the telnet daemons on system B will use TCP
port 23, you could use the following command:
On system A you want to determine which host IPsec policy will be used for inbound telnet traffic from system B or when users on system B
telnet to the local system. Since the local telnet daemons will use TCP port 23 and clients on system B will use any unused user-space TCP
port, you could use the following command:
WARNINGS
requires the optional HP-UX IPSec software.
AUTHOR
was developed by HP.
SEE ALSO ipsec_admin(1M), ipsec_config(1M), ipsec_config_add(1M), ipsec_config_batch(1M), ipsec_config_delete(1M), ipsec_config_export(1M),
ipsec_config_show(1M), ipsec_migrate(1M), ipsec_report(1M).
HP-UX IPSec Software Required ipsec_policy(1M)
