10 More Discussions You Might Find Interesting
1. Solaris
please find the below o/p for your reference
bash-3.00# fcinfo hba-port
HBA Port WWN: 21000024ff295a34
OS Device Name: /dev/cfg/c2
Manufacturer: QLogic Corp.
Model: 375-3356-02
Firmware Version: 05.03.02
FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;... (3 Replies)
Discussion started by: sb200
3 Replies
2. Solaris
Hello,
I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build.
The first part is what confuses me -the cabling.
I am coming from a Windows machine (w/appropriate... (5 Replies)
Discussion started by: joboy
5 Replies
3. Web Development
I need to set a serial port to 9600 7E1. How do I accomplish this?
I've tried every combination, with no luck. (6 Replies)
Discussion started by: Meow613
6 Replies
4. Web Development
I am trying to write to a serial port and capture the reponse in a file -
adduser ethan dialout
The user `ethan' is already a member of `dialout'
root@meow:/home/ethan# ls -l /dev/ttyS0
crw-rw-r-- 1 ethan dialout 4, 64 Oct 7 20:55 /dev/ttyS0
$fh1 = fopen("/dev/ttyS0", "w+");... (74 Replies)
Discussion started by: Meow613
74 Replies
5. Solaris
Hi Everyone,
In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
Discussion started by: bobby320
3 Replies
6. Shell Programming and Scripting
Hi,
I have a external board connected to my serial port. I need to execute "shutdown -r now" command when system boot up. When system boots up it requires a username ans password. Then I need to run my command. I can use rc script but that is rebooting system before it asks for username and... (0 Replies)
Discussion started by: charlie.arya
0 Replies
7. Programming
Hello!
Can someone advice me which method I will use if I want to communicate with device via RS232 serial port with this requirements:
1. Serial port is opened in non-canonical mode.
2. All the time I need to check is there something to read.
3. If I have to write something I need to write it... (6 Replies)
Discussion started by: jvrlic
6 Replies
8. Programming
I am developing an application in c with Linux OS, where a radio modem working at baud rate 9600 will be attached to PC on serial port. More than four such units will be communicating at one time, so there may be jamming or data corruption. Each module will be transmitting Data packets less than... (2 Replies)
Discussion started by: raj8109
2 Replies
9. Linux
Hi All,
I am a begineer in Linux, I have 4 ports and 3 are operational port 1,port 2 and port 4 (when I plug in serial device I can see it working) but port 3 seems it is not working.
I am sure the hardware is fine.
when I give command
dmesg | grep tty
I get,
serial 8250:ttyS0 at... (0 Replies)
Discussion started by: vr_82
0 Replies
10. UNIX for Dummies Questions & Answers
I am having trouble with a device connected through a serial port on my sun workstation ( I am running solaris 7).
The seriel device works on an identical workstation running the same o/s version but when I move it to the initial workstation it doesn't work. I am using an rs232 serial cable and... (1 Reply)
Discussion started by: Henrik
1 Replies
FCNSQ(8) Open-FCoE Tools FCNSQ(8)
NAME
fcnsq - Fibre Channel Name Server Query Tool
SYNOPSIS
fcnsq host --gpn port_id [-q | --quiet]
fcnsq host --gnn port_id [-q | --quiet]
fcnsq host --gspn port_id [-q | --quiet]
fcnsq host --gsnn wwpn [-q | --quiet]
fcnsq ?
DESCRIPTION
The fcnsq command performs Fibre Channel Name Server queries for a user-specified FC Host. The supported name server query commands
include: Get Port Name (GPN), Get Node Name (GNN), Get Symbolic Node Name (GSNN), and Get Symbolic Port Name (GSPN) as described in FC-GS-3
for the Common Transport (CT) services.
fcnsq takes the host bsg name as the input for the target host. Host bsg name must be a valid bsg device, e.g., "host12" as derived from
/dev/bsg/fc_host12. For each name server query command, the argument is either a Port ID or a World Wide Port Name. Port IDs and World Wide
Names must be specified in hexadecimal. To disable verbose output, use the --quiet option.
OPTIONS
host --gpn port_id
Get Port Name by Port ID for host.
host --gnn port_id
Get Node Name by Port ID for host.
host --gspn port_id
Get Symbolic Port Name by Port ID for host.
host --gsnn wwpn
Get Symbolic Node Name by World Wide Port Name for host.
-q, --quiet
Disable verbose output.
?
Display a help message with basic usage instructions.
EXAMPLES
Query Get Port Name (GPN) from host12 for Port ID 0xbf0027
fcnsq host12 --gpn bf0027
Query Get Node Name (GNN) from host12 for Port ID 0xbf0027
fcnsq host12 --gnn bf0027
Query Get Symbolic Port Name (GSPN) from host12 for Port ID 0xbf0027
fcnsq host12 --gspn bf0027
Query Get Symbolic Node Name (GSNN) from host12 for WWWPN 0x1000001B213C9DDA
fcnsq host12 --gsnn 0x1000001B213C9DDA
SEE ALSO
fcoeadm(8)
SUPPORT
fcnsq is part of the fcoe-utils package, maintained through the Open-FCoE project. Resources for both developers and users can be found at
the Open-FCoE website http://open-fcoe.org/.
Open-FCoE 06/09/2010 FCNSQ(8)