10 More Discussions You Might Find Interesting
1. Solaris
please find the below o/p for your reference
bash-3.00# fcinfo hba-port
HBA Port WWN: 21000024ff295a34
OS Device Name: /dev/cfg/c2
Manufacturer: QLogic Corp.
Model: 375-3356-02
Firmware Version: 05.03.02
FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;... (3 Replies)
Discussion started by: sb200
3 Replies
2. Solaris
Hello,
I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build.
The first part is what confuses me -the cabling.
I am coming from a Windows machine (w/appropriate... (5 Replies)
Discussion started by: joboy
5 Replies
3. Web Development
I need to set a serial port to 9600 7E1. How do I accomplish this?
I've tried every combination, with no luck. (6 Replies)
Discussion started by: Meow613
6 Replies
4. Web Development
I am trying to write to a serial port and capture the reponse in a file -
adduser ethan dialout
The user `ethan' is already a member of `dialout'
root@meow:/home/ethan# ls -l /dev/ttyS0
crw-rw-r-- 1 ethan dialout 4, 64 Oct 7 20:55 /dev/ttyS0
$fh1 = fopen("/dev/ttyS0", "w+");... (74 Replies)
Discussion started by: Meow613
74 Replies
5. Solaris
Hi Everyone,
In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
Discussion started by: bobby320
3 Replies
6. Shell Programming and Scripting
Hi,
I have a external board connected to my serial port. I need to execute "shutdown -r now" command when system boot up. When system boots up it requires a username ans password. Then I need to run my command. I can use rc script but that is rebooting system before it asks for username and... (0 Replies)
Discussion started by: charlie.arya
0 Replies
7. Programming
Hello!
Can someone advice me which method I will use if I want to communicate with device via RS232 serial port with this requirements:
1. Serial port is opened in non-canonical mode.
2. All the time I need to check is there something to read.
3. If I have to write something I need to write it... (6 Replies)
Discussion started by: jvrlic
6 Replies
8. Programming
I am developing an application in c with Linux OS, where a radio modem working at baud rate 9600 will be attached to PC on serial port. More than four such units will be communicating at one time, so there may be jamming or data corruption. Each module will be transmitting Data packets less than... (2 Replies)
Discussion started by: raj8109
2 Replies
9. Linux
Hi All,
I am a begineer in Linux, I have 4 ports and 3 are operational port 1,port 2 and port 4 (when I plug in serial device I can see it working) but port 3 seems it is not working.
I am sure the hardware is fine.
when I give command
dmesg | grep tty
I get,
serial 8250:ttyS0 at... (0 Replies)
Discussion started by: vr_82
0 Replies
10. UNIX for Dummies Questions & Answers
I am having trouble with a device connected through a serial port on my sun workstation ( I am running solaris 7).
The seriel device works on an identical workstation running the same o/s version but when I move it to the initial workstation it doesn't work. I am using an rs232 serial cable and... (1 Reply)
Discussion started by: Henrik
1 Replies
SOUNDMODEM(9) Kernel Reference Guide SOUNDMODEM(9)
NAME
soundmodem - amateur (AX.25) packet radio network driver for soundcards
SYNOPSIS
#include <linux/soundmodem.h>
#include <linux/hdlcdrv.h>
DESCRIPTION
The driver currently supports both 1200 baud AFSK and 9600 baud FSK (G3RUH compatible) using a standard SoundBlaster compatible or Windows-
SoundSystem compatible soundcard. The whole decoding is done in software, so you definitely do not want to use it on a 386SX class machine.
KEYING THE TRANSMITTER
Soundcards do not have a DC coupled output that could serve as a PTT signal. So there are basically for possibilities for obtaining a PTT
signal. Sample schematic diagrams can be found on http://www.ife.ee.ethz.ch/~sailer/pcf/ptt_circ/ptt.html.
VOX circuitry
A simple VOX circuitry that detects output signals at the output of the soundcard can be used, especially as it can be built with a single
transistor plus a few passive components and typical soundcards have strong output signals.
Parallel Port
A parallel port line can also be used to signal PTT. If selected, the PTT signal is output on the DATA0 line and DCD is output on the DATA1
line.
Serial Port
A standard serial port (8250, 16450, 16550) can also be used to output PTT. PTT is output on RTS and TxD, while DCD is output on DTR.
MPU401 MIDI Port
The MIDI port is basically an asynchronous serial interface and thus cannot output a straight DC level, however it may be used if connected
through a retriggerable monoflop with about 15ms pulse duration. Note that only newer SoundBlaster models have a genuine MPU401 MIDI port.
The older SB MIDI port cannot be used.
IOCTL CALLS
The ioctl calls follow the implementation in the hdlcdrv.
SMCTL_GETMODEMTYPE
returns the modem type (i.e. SBC1200, SBC9600, WSS1200 or WSS9600)
SMCTL_SETMODEMTYPE
sets the modem type. Only superuser can do this.
SMCTL_GETMIXER
returns the mixer type and the contents of the specified mixer register.
SMCTL_SETMIXER
sets the specified mixer register, if the specified mixer type matches the mixer type of the soundcard. Only superuser can do this.
SMCTL_DIAGNOSE
returns the contents of the diagnose buffer, which is used by smdiag to display the eye and oscilloscope diagrams.
SMCTL_GETDEBUG
return some debugging values. Not always available.
SEE ALSO
baycom (9), soundmodem (9),smdiag (8),smmixer (9), linux/drivers/net/hdlcdrv.c,
AUTHOR
soundmodem was written by Thomas Sailer, HB9JNX/AE4WA, (t.sailer@alumni.ethz.ch).
Linux 2.1.x 2 October 1996 SOUNDMODEM(9)
Serial Port/Com Port