Login or Register to Ask a Question and Join Our Community


Post Here to Contact Site Administrators and Moderators

site down investigation

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Contact Us Post Here to Contact Site Administrators and Moderators site down investigation
# 1  
Old 06-27-2005
site down investigation
I'm rather new to web site administration so i would greatly appreciate some help.

My site has been going down quite frequently and i cannot figure out why. I'm on a shared server at OLM.net and the site goes down once a day or once every 2-3 days which is quite unacceptable. We are still small and we dont get a lot of traffic. We want to have decent reliability before we start heavily marketing and getting more traffic, however i cant seem to figure out how to get to reliability.

I'm open to any suggestions at this point. If its my host, i'm willing to switch if you can suggest a better one. I also understand that it might be because of the shared server, but i want to know for sure that it is before going dedicated, is it my scripts' fault or the server?

Any advice with this would again be greatly appreciated.
Login or Register to Ask a Question

Previous Thread | Next Thread

8 More Discussions You Might Find Interesting

1. What is on Your Mind?

Is this site for me?

Hello, I am new here and my name is Robert. I was actually looking for a forums website where I can go with questions regarding Linux and embedded Linux applications. I am fairly new (6 months) to the world of Linux and embedded Linux applications and the the learning curve is steep. When I am not... (13 Replies)
Discussion started by: Circuits
13 Replies

2. IP Networking

IPSec Openswan Site to Site VPN - Big Pain

Hi @all, I try to connect 2 LANs with IPSec/Openswan LAN 1: 192.168.0.0/24 LAN 2: 192.168.1.0/24 This is my Config: conn HomeVPN # # Left security gateway, subnet behind it, nexthop toward right. left=192.168.1.29 ... (1 Reply)
Discussion started by: bahnhasser83
1 Replies

3. IP Networking

Does cisco 1921 router support site to site VPNs using IPSec?

Q: "Does Cisco 1921 router support,, act as an endpoint for, site to site VPNs using IPSec? If so, how many? " A: If you get the Cisco 1921/k9 with the security services bundle then it will have built in security features. Cisco, typically includes IP Sec tunnels I believe as part of that... (0 Replies)
Discussion started by: Ayaerlee
0 Replies

4. IP Networking

How to establish site to site vpn - Linux machine and cisco asa?

Hi, I am trying to establish vpn between my linux server and cisco asa at client side. I installed openswan on my cent os. Linux Server eth0 - 182.2.29.10 Gateway - 182.2.29.1 eth1 - 192.9.200.75 I have simple IPtables Like WAN="eth0" LAN="eth1" (0 Replies)
Discussion started by: ashokvpp
0 Replies

5. AIX

AIX Shutdown Investigation

AIX error log (read with the errpt command) /var/adm/wtmp account file (read with the last command) /var/adm/pacct account files (read with the lastcomm command) AIX console log (read with the alog -t console -o command) su log file (read with cat /var/adm/sulog) Shell history file (read... (4 Replies)
Discussion started by: prpkrk
4 Replies

6. Linux

Reboot investigation problem

I have a linux server,in this i receive alarm as server has rebooted. When i check uptime of the server it says that the server has rebooted but when i check output of who -b it says that the server rebooted very long back Can some one help what is the issue here. (3 Replies)
Discussion started by: tiwsaj
3 Replies

7. Emergency UNIX and Linux Support

Performance investigation, very high runq-sz %runocc

I've just been handed a hot potato from a colleague who left :(... our client has been complaining about slow performance on one of our servers. I'm not very experienced in investigating performance issues so I hoping someone will be so kind to provide some guidance Here is an overview of the... (8 Replies)
Discussion started by: Solarius
8 Replies

8. IP Networking

port access to site to site VPN

Setup a site to site VPN between two cisco routers. One of the site locations is unable to access ports such as https://example.com:9001 How do I let them go into port 9001? They can ssh, ftp, telnet and everything else. Is this a VPN issue or ACL access issue? I put permit ip host... (0 Replies)
Discussion started by: photon
0 Replies
Login or Register to Ask a Question

LEARN ABOUT DEBIAN

jekyll

JEKYLL(1)							   User Commands							 JEKYLL(1)

NAME

       Jekyll - is a blogaware, static site generator.

USAGE

       jekyll # . -> ./_site

       jekyll <path to write generated site>
	      # . -> <path>

       jekyll <path to source> <path to write generated site>
	      # <path> -> <path>

       jekyll import <importer name> <options>
	      # imports posts using named import script

	      Configuration is read from '<source>/_config.yml' but can be overridden using the following options:

OPTIONS

       --file [PATH]
	      File to import from

       --dbname [TEXT]
	      DB to import from

       --user [TEXT]
	      Username to use when importing

       --pass [TEXT]
	      Password to use when importing

       --host [HOST ADDRESS]
	      Host to import from

       --site [SITE NAME]
	      Site to import from

       --[no-]safe
	      Safe mode (default unsafe)

       --[no-]auto
	      Auto-regenerate

       --server [PORT]
	      Start web server (default port 4000)

       --no-server
	      Do not start a web server

       --base-url [BASE_URL]
	      Serve website from a given base URL (default '/'

       --[no-]lsi
	      Use LSI for better related posts

       --[no-]pygments
	      Use pygments to highlight code

       --rdiscount
	      Use rdiscount gem for Markdown

       --redcarpet
	      Use redcarpet gem for Markdown

       --kramdown
	      Use kramdown gem for Markdown

       --time [TIME]
	      Time to generate the site for

       --[no-]future
	      Render future dated posts

       --permalink [TYPE]
	      Use 'date' (default) for YYYY/MM/DD

       --paginate [POSTS_PER_PAGE]
	      Paginate a blog's posts

       --limit_posts [MAX_POSTS]
	      Limit the number of posts to publish

       --url [URL]
	      Set custom site.url

       --version
	      Display current version

AUTHOR

       This manual page was written by Youhei SASAKI <uwabami@gfd-dennou.org>, for the Debian GNU/Linux system(but may be used by others).

Jekyll 0.11.2							     May 2012								 JEKYLL(1)