|
|
MacBook Pro (Late 2008): Cannot select GeForce 9400M graphics in Windows
|
|
NV(4) Kernel Interfaces Manual NV(4) NAME
nv - NVIDIA video driver SYNOPSIS
Section "Device" Identifier "devname" Driver "nv" ... EndSection DESCRIPTION
nv is an XFree86 driver for NVIDIA video cards. The driver supports 2D acceleration and provides support for the following framebuffer depths: 8, 15, 16 (except Riva128) and 24. All visual types are supported for depth 8, TrueColor and DirectColor visuals are supported for the other depths with the exception of the Riva128 which only supports TrueColor in the higher depths. SUPPORTED HARDWARE
The nv driver supports PCI, PCI-Express and AGP video cards based on the following NVIDIA chips: RIVA 128 NV3 RIVA TNT NV4 RIVA TNT2 NV5 GeForce 256, QUADRO NV10 GeForce2, QUADRO2 NV11 & NV15 GeForce3, QUADRO DCC NV20 nForce, nForce2 NV1A, NV1F GeForce4, QUADRO4 NV17, NV18, NV25, NV28 GeForce FX, QUADRO FX NV30, NV31, NV34, NV35, NV36, NV37, NV38 GeForce 6XXX NV40, NV41, NV43, NV44, NV45, C51 GeForce 7XXX G70, G71, G72, G73 CONFIGURATION DETAILS
Please refer to XF86Config(5) for general configuration details. This section only covers configuration details specific to this driver. The driver auto-detects the chipset type and the amount of video memory present for all chips. The following driver Options are supported: Option "HWCursor" "boolean" Enable or disable the HW cursor. Default: on. Option "NoAccel" "boolean" Disable or enable acceleration. Default: acceleration is enabled. Option "UseFBDev" "boolean" Enable or disable use of an OS-specific fb interface (and is not supported on all OSs). See fbdevhw(4) for further information. Default: off. Option "CrtcNumber" "integer" Many graphics cards with NVIDIA chips have two video outputs. The driver attempts to autodetect which one the monitor is connected to. In the case that autodetection picks the wrong one, this option may be used to force usage of a particular output. The options are "0" or "1". Default: autodetected. Option "FlatPanel" "boolean" The driver usually can autodetect the presence of a digital flat panel. In the case that this fails, this option can be used to force the driver to treat the attached device as a digital flat panel. With this driver, a digital flat panel will work only if it was POSTed by the BIOS, that is, the computer must have booted to the panel. If you have a dual head card you may also need to set the option CrtcNumber described above. Default: autodetected. Option "FPDither" "boolean" Many digital flat panels (particularly ones on laptops) have only 6 bits per component color resolution. This option tells the driver to dither from 8 bits per component to 6 before the flat panel truncates it. Default: off. Option "FPScale" "boolean" Supported only on GeForce4 and newer chips, this option tells to the driver to scale lower resolutions up to the flat panel's native resolution. Default: on. Option "Rotate" "CW" Option "Rotate" "CCW" Rotate the display clockwise or counterclockwise. This mode is unaccelerated. Default: no rotation. Note: The Resize and Rotate extension will be disabled if the Rotate option is used. Option "ShadowFB" "boolean" Enable or disable use of the shadow framebuffer layer. Default: off. SEE ALSO
XFree86(1), XF86Config(5), xf86config(1), Xserver(1), X(7) AUTHORS
Authors include: David McKay, Jarno Paananen, Chas Inman, Dave Schmenk, Mark Vojkovich XFree86 Version 4.7.0 NV(4)
