Login or Register to Ask a Question and Join Our Community


OS X Support RSS

Final Cut Pro: Creating an Easy Setup for capturing DV with 32 kHz audio

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems OS X (Apple) OS X Support RSS Final Cut Pro: Creating an Easy Setup for capturing DV with 32 kHz audio
# 1  
Old 11-17-2008
Final Cut Pro: Creating an Easy Setup for capturing DV with 32 kHz audio
If you often need to capture DV (digital video) that has an audio sample rate of 32 kHz, you may want to create an Easy Setup in Final Cut Pro with all the necessary settings.Note: the typical reason to set your DV camcorder to record at 32 kHz is for 4-channel audio. In most circumstances, you'll get best results by setting the camcorder to record audio at the standard sample rate of 48 kHz (2-channel). Follow this procedure for capturing material already recorded at 32 kHz.

More from Apple OS X Support ...
Login or Register to Ask a Question

Previous Thread | Next Thread
Login or Register to Ask a Question

LEARN ABOUT DEBIAN

dvsource-alsa

DVSOURCE-DVGRAB(1)					      General Commands Manual						DVSOURCE-DVGRAB(1)

NAME

       dvsource-alsa - audio source for DVswitch

SYNOPSIS

       dvsource-alsa [OPTIONS] [-s ntsc|pal] [-r 48000|32000|44100] [DEVICE]

DESCRIPTION

       dvsource-alsa uses ALSA to capture audio and sends it to DVswitch together with a dummy video stream.

       The optional DEVICE argument is a PCM device name. See the ALSA documentation <http://www.alsa-project.org/alsa-doc/alsa-lib/
       pcm.html#pcm_dev_names> for an explanation of these names.

OPTIONS

       -h, --host=HOST

       -p, --port=PORT
	      Specify the network address on which DVswitch is listening.  The host address may be specified by name or as an IPv4  or	IPv6  lit-
	      eral.

       -s, --system=ntsc|pal
	      Specify the video system to use.	This must match the system used by DVswitch.  The default is "pal".

       -d, --rate=48000|32000|44100
	      Specify the sample rate, in Hz.  The default is 48000.

       -d, --delay=DELAY
	      Specify  the  time  by  which  audio  should  be delayed, in seconds.  The delays in live audio and video sources need to be closely
	      matched in order that the audio and video signals will be synchronised in the output of DVswitch.  The default is 0.2.

AUTHOR

       Ben Hutchings <ben@decadent.org.uk>.

SEE ALSO

       http://www.alsa-project.org/alsa-doc/alsa-lib/pcm.html, /usr/share/doc/dvswitch/README

								   11 March 2009						DVSOURCE-DVGRAB(1)