Login or Register to Ask a Question and Join Our Community


OS X Support RSS

Logic Express 8: Troubleshooting Basics

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems OS X (Apple) OS X Support RSS Logic Express 8: Troubleshooting Basics
# 1  
Old 11-13-2008
Logic Express 8: Troubleshooting Basics
If Logic Express 8 isn't starting up properly or performing normally, try these basic troubleshooting steps to remedy the situation. Please note that these steps aren't exhaustive, and are not intended to cover any specific issue. They are fundamental, basic steps that are most effective in getting Logic Express 8 into good working order, and are the steps most often suggested by AppleCare Technical Support. If you are running Logic Express 7, click here.

More from Apple OS X Support ...
Login or Register to Ask a Question

Previous Thread | Next Thread
Login or Register to Ask a Question

LEARN ABOUT DEBIAN

pcic

PCIC(4) 						   BSD Kernel Interfaces Manual 						   PCIC(4)

NAME

     pcic -- PC Card bridge driver

SYNOPSIS

     device pcic
     device pccard

DESCRIPTION

     The pcic driver provides support for older ISA and non-Yenta PCI PC Card bridges.	The pcic driver supports most ExCA devices attached to the
     ISA bus or PCI devices that do not conform to the Yenta specification.

     The following ISA devices, or true clones, are supported in the current code.

     Intel i82365SL Step A
     Intel i82365SL Step B
     Intel i82365SL Step C  Intel's original 16-bit PC Card controller.
     Intel i82365SL-DF	    Intel's last version of this device.  3.3V support was added.
     VLSI 82C146	    An older VLSI part with some issues on some machines.
     Cirrus Logic PD-6710
     Cirrus Logic PD-6720
     Cirrus Logic PD-6722   Cirrus Logic's pcic controller.  Compatible with the i82365SL Step C with the addition of a different 3.3V control.
     Ricoh RF5C296
     Ricoh RF5C396	    Ricoh's PC Card bridge chips.  These are compatible with the i82365SL Step C, but with yet another different 3.3V con-
			    trol.
     Vadem 365
     Vadem 465		    Compatible with i82365SL Step C.
     Vadem 468
     Vadem 469		    Like the earlier Vadem models, but with Vadem's own, incompatible, 3.3V control system.
     IBM PCIC		    IBM clone of the original i82365SL part, with its own ID register value.  Has no 3.3V ability.

     Many other vendors made parts in this arena, but most of them were compatible with one of the above chipsets.

     The following PCI pcmcia bridges are supported:

     Cirrus Logic PD6729
     Cirrus Logic PD6730

     O2micro OZ6729
     O2micro OZ6730

BUGS

     This does not work at all at the moment.

BSD
								   July 9, 2002 							       BSD