Login or Register to Ask a Question and Join Our Community


OS X Support RSS

iPhone: Unexpected results if importing SIM contacts from a Sony Ericsson phone

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems OS X (Apple) OS X Support RSS iPhone: Unexpected results if importing SIM contacts from a Sony Ericsson phone
# 1  
Old 11-11-2008
iPhone: Unexpected results if importing SIM contacts from a Sony Ericsson phone
Symptom 1After importing your SIM contacts from a Sony Ericsson phone to an original iPhone or iPhone 3G, syncing the contacts from the iPhone to a Microsoft Exchange Server over-the-air might result in the following symptom: The contact entry/entries that were synced from the iPhone to the Exchange Server will not have the phone number displayed for that contact.Symptom 2After importing your SIM contacts from a Sony Ericsson phone to an original iPhone or iPhone 3G, syncing the contacts from the iPhone to Microsoft Outlook using iTunes with the USB cable might result in the following symptom: The phone number for the contact entry will be displayed in the "Other" category field rather than "Work", "Home", or "Mobile."

More from Apple OS X Support ...
Login or Register to Ask a Question

Previous Thread | Next Thread

1 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Unexpected Results

Hello, When I run this script, here's what I get: Searching ... found 1111 2222 3333 ..... 7777 ..... 8888 9999 in 95_test Search completed. I expected only to see what number was found in the file, not including the ones not found. Thanks for your help! #!/bin/sh (1 Reply)
Discussion started by: SSims
1 Replies
Login or Register to Ask a Question

LEARN ABOUT FREEBSD

uplcom

UPLCOM(4)						   BSD Kernel Interfaces Manual 						 UPLCOM(4)

NAME

     uplcom -- USB support for Prolific PL-2303/2303X/2303HX serial adapters driver

SYNOPSIS

     To compile this driver into the kernel, place the following lines in your kernel configuration file:

	   device usb
	   device ucom
	   device uplcom

     Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):

	   uplcom_load="YES"

DESCRIPTION

     The uplcom driver provides support for various serial adapters based on the Prolific PL-2303, PL-2303X and PL-2303HX USB-to-RS232 Bridge
     chips.

     The device is accessed through the ucom(4) driver which makes it behave like a tty(4).

HARDWARE

     The uplcom driver supports the following devices and adapters:

     o	 ADLINK ND-6530 USB-Serial Adapter
     o	 Alcatel One Touch 535/735 Phone
     o	 Alcor AU9720 USB-RS232 Serial Adapter
     o	 AlDiga AL-11U Modem
     o	 Alltronix ACM003U00 Modem
     o	 Anchor Serial adapter
     o	 ATEN UC-232A
     o	 BAFO BF-800 and BF-810
     o	 Belkin F5U257
     o	 BenQ S81 Phone
     o	 Corega CG-USBRS232R Serial Adapter
     o	 Cressi Edy (Seiko) Diving Computer
     o	 ELECOM UC-SGT Serial Adapter
     o	 HAL Corporation Crossam2+USB IR commander
     o	 Hama USB RS-232 Serial Adapter
     o	 Hamlet exagerate XURS232
     o	 HP LD220 Point-Of-Sale (POS) Display
     o	 IOGEAR UC-232A
     o	 I/O DATA USB-RSAQ, USB-RSAQ2, USB-RSAQ3 and USB-RSAQ5
     o	 iTegno WM1080A GSM/GFPRS Modem
     o	 iTegno WM2080A CDMA Modem
     o	 Leadtek 9531 GPS
     o	 Micromax 610U Modem
     o	 Microsoft Palm 700WX
     o	 Mobile Action MA-620 Infrared Adapter
     o	 Motorola Cables
     o	 Nokia CA-42 Cable
     o	 OTI DKU-5 cable
     o	 Panasonic TY-TP50P6-S flat screen
     o	 PLX CA-42 Phone Cable
     o	 PLANEX USB-RS232 URS-03
     o	 Prolific Generic USB-Serial Adapters
     o	 Prolific Pharos USB-Serial Adapter
     o	 RATOC REX-USB60
     o	 Radio Shack USB Serial Cable
     o	 Sagem USB-Serial Adapter
     o	 Samsung I330 Phone Cradle
     o	 Sandberg USB to Serial Link (model number 133-08)
     o	 Sanwa KB-USB2 Multimeter cable
     o	 Siemens/BenQ EF81, SX1, X65 and X75 Mobile Phones
     o	 Sitecom USB-Serial Adapter
     o	 SMART Technologies USB-Serial Adapter
     o	 Sony QN3 Phone Cable
     o	 Sony Ericsson Datapilot
     o	 Sony Ericsson DCU-10 and DCU-11 (Susteen) USB Cables
     o	 SOURCENEXT KeikaiDenwa 8 (with and without charger)
     o	 Speed Dragon USB-Serial Cable
     o	 Syntech CPT-8001C Barcode Scanner
     o	 TDK UHA6400 and UPA9664 USB-PHS Adapters
     o	 TRENDnet USB to Serial Converter (TU-S9)
     o	 Tripp-Lite U209-000-R USB-Serial Adapter
     o	 UIC HCR331 Magnetic Stripe Card Reader
     o	 UIC MSR206 Magnetic Stripe Card Reader
     o	 Willcom W-SIM DD PHS terminal.(WS002IN)
     o	 YC-Cable USB-Serial Adapter
     o	 Zeagle N2iTion3 Diving Computer

SEE ALSO

     tty(4), ucom(4), usb(4)

HISTORY

     The uplcom driver appeared in NetBSD 1.6.	This manual page was adopted from NetBSD by Tom Rhodes <trhodes@FreeBSD.org> in April 2002.

BSD
								   July 25, 2012							       BSD