The Migration and DVD/CD Sharing Update is recommended for all users. It provides enhanced customization capabilities and improved performance for migration over FireWire, Ethernet and wireless networks.
I'd like to share some experiences and what I found for NIS migration from Solaris 8 NIS to Linux platform.
I'm not an expert for both platforms, it's just when I tested both systems and found something really tricky. That might takes a lot of time for you to find the root cause. So, I think I can... (11 Replies)
Hello,
Running AIX 7.1 7100-00-03-1115, trying to make a mksysb image to a dvd drive using mkdvd. My final command looks like this..
mkdvd -e -V rootvg -R -C /usr1/AIXADMIN/mkcd/cd_fs -I /usr1/AIXADMIN/mkcd/cd_images -M /usr1/AIXADMIN/mkcd/mksysbimage -d /dev/cd0 -Y
When i run this... (3 Replies)
I'm New to AIX / VIOS
We're doing a FC switch cutover on an ibm device, connected via SAN.
How do I tell if one path to my remote disk is lost? (aix lvm)
How do I tell when my link is down on my HBA port?
Appreciate your help, very much! (4 Replies)
Hi all,
i have just migrate my aix 6.1 to 7.1.
After migration my release is: 7100-00-03-1115
now i try to update to 7100-01-00-1140 but i receive lots of BUILD CHECK DATE FAILED on"mcr.rte" and other packets.
+-----------------------------------------------------------------------------+
... (3 Replies)
Hi,
I can not download iso file as it failed after
downloading 1.1 or 1.2 gigs. I tried several
times but each time it failed and the error
messages like "File not found" or "Read error".
My connection is stable (shown 32kbps and 18 hrs
completion time) and I used jdownloader and
flashgot... (10 Replies)
I have T5220 server with DVD drive. I have installed few logical domains in the server and wonder how they can share the DVD drive. I have not seen any mention of that in Sun documentation. (7 Replies)
I have RedHat 9.0 installed on three of my servers (PIII - 233MHz) and want that they share a common IP address so that any request made reaches each of the servers.
Can anyone suggest how should I setup my LAN. I'm new to networking in Linux so please elaborate and would be thankful for a timely... (2 Replies)
pxfw(8) pxfw 0.5 pxfw(8)NAME
pxfw - Firmware flashing tool for Plextor CD/DVD devices
SYNOPSIS
pxfw -l
pxfw -d DEVICE [-if firmware.bin] [-u] [-f] [-v]
pxfw -d DEVICE [-e] [-r] [-t] [-v]
DESCRIPTION
pxfw is the linux firmware flasher for Plextor CD and DVD drives. Remove any disks before flashing.
FEATURES
You can flash the firmware of these drives:
Plextor Premium, Premium-2, PX-712, PX-716, PX-755 and PX-760.
DEVICE
can be an IDE, SCSI, SATA, USB or FireWire connected optical drive. Not all SATA controller support all Plextor features.
Linux:
/dev/hdX: IDE device
/dev/scdX: Linux 2.4: SATA, SCSI, USB device, or IDE device via ide-scsi emulation
/dev/srX: Linux 2.6: IDE device via new ATA layer, SCSI or USB device
OpenBSD/NetBSD:
/dev/rcdX
FreeBSD:
/dev/cd: SCSI device
/dev/acd: ATA device
MacOS X:
/dev/disk:
win32:
C:,D:,E:, ... X:,Y:,Z:
OPTIONS -l scan busses for all available CD and DVD devices
-if select inputfile. Specify the firmware binary file, which should
be written to DEVICE.
-u proceed update. When the firmware checksum test has succeeded,
write firmware to DEVICE.
-f force flashing. Even if DEVICE is not recognized, or firmware.
checksum has failed, firmware writing will be forced.
Handle with care.
-e read EEPROM from DEVICE.
-r reboot the device.
-t test which opcodes are supported by the device.
-v debug.
EXAMPLES
pxfw -d /dev/hdc -if 755_1.07.bin -u
writes firmware file 755_1.07.bin into Master Drive on Secondary IDE-Port.
pxfw -d /dev/sr3 -e -oe file.foo
reades EEPROM from device /dev/sr3 and writes it to file.foo.
please report man page improvements to T.Maguin@web.de
Gennady ShultZ Kozlov 02 April, 2009 pxfw(8)