Login or Register to Ask a Question and Join Our Community


OS X Support RSS

Final Cut Pro: Tips for archiving memory card-based media

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems OS X (Apple) OS X Support RSS Final Cut Pro: Tips for archiving memory card-based media
# 1  
Old 10-15-2008
Final Cut Pro: Tips for archiving memory card-based media
Standard tapeless workflows involve reformatting and reusing the memory cards used for shooting. Before reformatting the cards, it's prudent to make a backup copy of your media on hard disk, whether for safety or for recapture later on. This article discusses guidelines for reliable backup. Note: It's important to preserve the original names and folder structure found on the memory card so that the media will be recognized and handled correctly when retrieving the archive. If you try to access media from a memory card that you saved to a hard disk then changed its folder name or structure, Final Cut Pro warns you with a message like this: Warning "Folder Name" contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media. Other transfer software may also be unable to open media files copied from memory cards if the folder names or folder structure has changed. This article discusses archiving memory cards like the following: Panasonic P2 cards containing MXF-wrapped media Sony SxS cards containing XDCAM EX media SDHC cards containing AVCHD media

More from Apple OS X Support ...
Login or Register to Ask a Question

Previous Thread | Next Thread
Login or Register to Ask a Question

LEARN ABOUT FREEBSD

xe

XE(4)							   BSD Kernel Interfaces Manual 						     XE(4)

NAME

     xe -- Xircom PCMCIA Ethernet device driver

SYNOPSIS

     To compile this driver into the kernel, place the following line in your kernel configuration file:

	   device xe

     Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):

	   if_xe_load="YES"

DESCRIPTION

     The xe driver supports PCMCIA Ethernet adapters based on Xircom CE2- and CE3-class hardware.  This includes devices made by Xircom along with
     various OEM manufacturers.

     Please note that the xe driver only supports PCMCIA cards and their Ethernet functions.  xe does not support the on-board modem device
     located on some version of the Ethernet/modem combo cards.  In particular, Xircom RealPort2 cards are not supported by this driver.

     The xe driver supports the following media types:

     autoselect  Enable autoselection of media type and options.

     10Base2/BNC
		 Select 10Mbps operation on a BNC coaxial connector.

     10BaseT/UTP
		 Select 10Mbps operation on a RJ-45 connector.

     100BaseTX	 Select 100Mbps operation.

     Note that 100BaseTX operation is not available on CE2-class cards, while the 10Base2/BNC mode is only available on CE2-class cards.  Full-
     duplex operation is currently not supported.  For more information on configuring network interface devices, see ifconfig(8).

HARDWARE

     The xe driver supports the following cards:

     o	 Xircom CreditCard Ethernet (PS-CE2-10)
     o	 Xircom CreditCard Ethernet + Modem 28 (PS-CEM-28)
     o	 Xircom CreditCard Ethernet + Modem 33 (CEM33)
     o	 Xircom CreditCard 10/100 (CE3, CE3B)
     o	 Xircom CreditCard Ethernet 10/100 + Modem 56 (CEM56)
     o	 Xircom RealPort Ethernet 10 (RE10)
     o	 Xircom RealPort Ethernet 10/100 (RE100)
     o	 Xircom RealPort Ethernet 10/100 + Modem 56 (REM56, REM56G)
     o	 Accton Fast EtherCard-16 (EN2226)
     o	 Compaq Microcom CPQ550 Ethernet/Modem PC Card
     o	 Compaq Netelligent 10/100 PC Card (CPQ-10/100)
     o	 Intel EtherExpress Pro/100 PC Card Mobile Adapter 16 (Pro/100 M16A)
     o	 Intel EtherExpress Pro/100 LAN/Modem PC Card Adapter (Pro/100 M16B)

     Other similar devices using the same hardware may also be supported.

DIAGNOSTICS

     xe%d: Cannot allocate ioport
     xe%d: Cannot allocate irq	A fatal initialization error occurred while attempting to allocate system resources for the card.

     xe%d: Unable to fix your %s combo card  A fatal initialization error occurred while attempting to attach an Ethernet/modem combo card.

     xe%d: watchdog timeout: resetting card  The card failed to generate an interrupt acknowledging a transmitted packet.  May indicate a PCMCIA
     configuration problem.

     xe%d: no carrier  The card has lost all contact with the network; this usually indicates a cable problem.

SEE ALSO

     pccard(4), ifconfig(8)

HISTORY

     The xe driver first appeared in FreeBSD 3.3.

AUTHORS

     The xe device driver was written by Scott Mitchell <rsm@FreeBSD.org>.  This manual page was written by Scott Mitchell <rsm@FreeBSD.org>, and
     Tom Rhodes <trhodes@FreeBSD.org>.

BUGS

     Supported devices will fail to attach on some machines using the NEWCARD PC Card framework.

     Automatic media selection is usually unreliable.

BSD
								   July 16, 2005							       BSD