Pro Applications: Entering serial number after migrating causes the application to stop responding
After using Migration Assistant in Mac OS X v10.6.x to migrate data and applications, you may be prompted to enter the serial number when opening a migrated application from any of the following products: Aperture 3 Final Cut Studio (2009) Logic Studio (2009) Logic Express 9 After entering the serial number and clicking OK, the application may not respond.
Hi Experts.
i have been stuck up with an issue.
i have connected my Solaris 8 , Sun fire V445 on serial port by using Teraterm.
Initially i was able to login and executed some tasks.
After executing some commands (mainly Control +c), i am not able to type any key or not able to do anything at... (2 Replies)
Hi Experts.
i have been stuck up with an issue.
i have connected my Solaris 8 , Sun fire V445 on serial port by using Teraterm.
Initially i was able to login and executed some tasks.
After executing some commands (mainly Control +c), i am not able to type any key or not able to do anything at... (2 Replies)
Hello!
I am working on an application which reads environmental instruments which have serial ports. The application requires a serial port to be present to talk to the device (i.e. /dev/ttyS0 ). In some instances the environmental devices will be 100's of yards away from the computer, so a... (5 Replies)
Hi All,
I am currently facing new problem of migrating C(c language) application from AIX machine to Linux machine. We are using GCC to compile the source code..
But facing with the compilation issues, with lot of GCC C libs differing between AIX box to Linux box...
Pls help me... (3 Replies)
hi everybody, this is my first visit here.
i have a sco unixware 7.1 box. terminals are connected thru digi multiserial devices. some users are also connected over the lan from pc stations running terminal emulation programs.
in few last weeks periodically ( almost every other day ) happens... (2 Replies)
ports(7) Miscellaneous Information Manual ports(7)NAME
ports, port_names - Device (tty and lp) names for serial and parallel ports
SYNOPSIS
Default Serial Ports:
/dev/tty00
/dev/tty01 (not present on a single-port system)
Parallel Port:
/dev/lp0
DESCRIPTION
AlphaStation and AlphaServer systems provide one or two 9-pin serial communication ports. These ports are usually labelled 1 (COMM1) and 2
(COMM2), but they may be identified by different icons. Using the appropriate serial cable and terminator, you can connect a serial
printer, external modem, or character-cell terminal to a serial port. Most AlphaStation and AlphaServer systems also provide one parallel
port, for use with a parallel printer.
When you add a device to your system, the installation documentation may instruct you to map the device pathname to the port. These
devices are located in the /dev directory.
For serial-line ports, the two default device pathnames are: This pathname always maps to 1, COMM1, the lowest port number, an icon for a
terminal console, or the only serial port (on a single-port system). This pathname always maps to 2, COMM2, the next numbered port, or (if
one serial port is labeled with an icon for a terminal console) the remaining serial port.
If your system hardware has been extended to include additional serial ports, the pathnames /dev/tty02, /dev/tty03, and so forth, may also
be available to you. However, most systems have only /dev/tty00 and /dev/tty01 as the device pathnames for serial ports.
The one parallel port on an AlphaStation or AlphaServer may be labeled with the word printer or a printer icon. On some systems, the paral-
lel port may not be labeled. The device pathname for the parallel port is /dev/lp0. Currently, Tru64 UNIX does not fully support parallel
printers, so fewer devices are connected to this port as compared to serial ports.
If you are connecting a terminal console to your system, it must be connected to the serial port mapped to /dev/tty00. For other serial
devices, it does not matter which of the serial ports you choose for the connection. For example, suppose you are setting up a system that
has two serial ports, labeled 1 and 2. You intend to use a serial-line terminal rather than a workstation monitor as the system console and
also want to connect a serial-line printer to the system. In this case, you must connect the terminal to the port labeled 1 (with the
device pathname /dev/tty00). Therefore, you must connect the printer to the remaining port labeled 2 (with the device pathname /dev/tty01).
If, for the same type of system, you intend to use a workstation monitor as the system console, it does not matter which serial port you
use for a serial-line printer or modem. In other words, you can connect the printer to either port 1 (with pathname /dev/tty00) or port 2
(with pathname /dev/tty01). When prompted to enter a /dev/tty** pathname by the lprsetup script or the Print configuration tool in the CDE
Application Manager, you would specify /dev/tty00 if you connected the printer to port 1 or /dev/tty01 if you connected the printer to port
2.
See the System Administration manual for more information on setting up consoles (including remote consoles) and printers. See the
modem(7) reference page for more information on setting up modems.
SEE ALSO
Commands: lprsetup(8)
Devices: ace(7), modem(7)
System Administration delim off
ports(7)