Failed Drive

9 More Discussions You Might Find Interesting

1. Solaris

Drive is showing offline in the /var/adm/messages and shows "drive type unknown" in the format outpu

Hi, I am facing issue with one of the drive is solaris 10. it is showing offline in the messages file scsi: WARNING: /pci@2,600000/QLGC,qlc@0/fp@0,0/ssd@w5006016746e00b1b,0 (ssd0): drive offline genunix: WARNING: Page83 data not standards compliant DGC LUNZ 0430 ...

2. Solaris

Replace failed drive in pool

I am not very savvy with Solaris but am responsible for a server running Solaris 10 that has a failed hard drive in a mirrored pool. I ordered a new drive and attempted to install but received the error "device too small" when using zpool replace. The drive is the same Seagate model number as the...

3. AIX

RAID 10 Failed Drive Swap

I am new to the AIX operating system and am seeking out some advice. We recently have had a drive go bad on our AIX server that is in a RAID 10 array. We have a replacement on the way. I was wondering what the correct steps are to swap out this drive. Does the server need to be powered off? Or can...

4. UNIX for Dummies Questions & Answers

Need help to move .csv file from UNIX path to windows shared drive or c:\ drive

Hi Guys, Can any one help me on this. I need help to move .csv/.xls file from unix path to windows shared drive or c:\ drive? Regards, LKR

5. Hardware

How to Clone a Drive with 512 byte Sectors to a Drive with 4096 bytes/sector (AF)?

I have a 320 GB drive which dual boots Windows and Debian: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal):...

6. AIX

SFTP Failed---Request for subsystem 'sftp' failed on channel 0

Hi, While I am trying SFTP my machine to another unix machine , it was working fine till 10 min back. But now i am getting the below error "Request for subsystem 'sftp' failed on channel 0" Could you please someone help me to solve or analyise the root cause... Cheers:b:, Mahiban

7. SCO

mounting USB floppy drive /Flash drive in OSR 6.0

Can anybody help me out to mount USB flash /floppy drive in sco openserver 6.0 .

8. UNIX for Dummies Questions & Answers

Map Drive From Windows To Apache Shared Drive?

Anyone know how I can map a windows drive to an apache shared drive? In my httpd.conf file, I have: Alias /merc_rpts/ "/u/merc_rpts/" <Directory "/u/merc_rpts"> Options Indexes </Directory> I'm able to bring up a browser and see the contents of this folder. In...

9. Filesystems, Disks and Memory

The best partitioning schem for a 250GB Sata hard drive & a 75GB SCSI hard drive

Hi I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /...

LEARN ABOUT OPENSOLARIS

volcheck

volcheck(1)							   User Commands						       volcheck(1)

NAME

       volcheck - checks for media in a drive and by default checks all floppy media

SYNOPSIS

       volcheck [-v] [-i secs] [-t secs] pathname

DESCRIPTION

       The  volcheck  utility tells volume management to look at each dev/pathname in sequence and determine if new media has been inserted in the
       drive.

       The default action is to volcheck all checkable media managed by volume management.

OPTIONS

       The following options are supported:

       -i secs	  Set the frequency of device checking to secs seconds.  The default is 2 seconds.  The minimum frequency is 1 second.

       -t secs	  Check the named device(s) for the next secs seconds.	The maximum number of seconds allowed is 28800, which is 8 hours. The fre-
		  quency of checking is specified by -i. There is no default total time.

       -v	  Verbose.

OPERANDS

       The following operands are supported:

       pathname    The path name of a media device.

EXAMPLES

       Example 1 A sample of the volcheck command.

       The following example

		 example% volcheck -v /dev/diskette
		 /dev/diskette has media

       asks volume management to examine the floppy drive for new media.

       The following example

		 example% volcheck -i 2 -t 600 /dev/diskette1 &

       asks volume management if there is a floppy in the floppy drive every 2 seconds for 600 seconds (10 minutes).

FILES

       /dev/volctl    volume management control port

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWvolu			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       eject(1), rmmount(1M), attributes(5)

WARNINGS

       Due  to a hardware limitation in many floppy drives, the act of checking for media causes mechanical action in the floppy drive.   Continu-
       ous polling of the floppy drive will cause the drive to wear out. It is recommended that polling the drive only be performed during periods
       of high use.

SunOS 5.11							    28 Feb 2007 						       volcheck(1)

OS X (Apple)