I have used ioscan -fnC tape and the system identified the tape drive. what is the command to show a listing of what is on the tape? I have used ls /dev/rmt/rmt0 to no avail. can anyone help?
Thanks in advance (10 Replies)
I've recently been tasked with "refurbishing" an HP Proliant ML370 running SCO 5.0...something. This is primarily used for legacy support and is kept on a shelf for safe keeping. The scope of work includes hardware diagnostics and blowing the dust out.
I have run HP diagnostics on the array,... (1 Reply)
Hey folks,
Linux admin here, forced to use Opensolaris to try to use ufsdump/ufsrestore to get some data of some old tapes.
I've got Opensolaris 2009.06 on x86 and a Sony SDX-700V.
As a "control" experiment, I booted the system with a Linux live CD and the tape drive worked perfectly.
... (2 Replies)
Hi,
I'm at AIX 5.3.
My EOD program is giving following error while writing to tape:
Can't write output
cpio: Media Surface error
Failed on Shell-script
cd /; cpio -ocB 2 >> /autoline/misc/logs/bk.CopyToTape < /autoline/work/BACKUP.01022 1>/dev/rm0
I have tried with several new tapes,... (2 Replies)
I have tape drive in one Lpar. when i saw that time tape is in defined state. After that i deleted the tape drive using the rmdev -R command. Then fired the cfgmgr -v command. But I am not getting the tape drive. Now the drive is even not in defined state also. It is not shown the tape drive. How... (1 Reply)
Hello everyone,
First, thank you anyone who might be able to help : ) !!
here it is, I am using SCO at my business, and I back up everything to a tape drive. I want to do my cleaning of the drive, and i put in the cartridge to the drive, it recognizes it yet it will not engage the... (5 Replies)
Hi,
I need to restore my tape backup, when I type "tape status" it gives;
status : ready beginning-of-tape write-protected
soft errors : 0
hard errors : 0
underruns : 3
but... (4 Replies)
MT(1) General Commands Manual MT(1)NAME
mt - magnetic tape control
SYNOPSIS
mt [-f device] [count]
DESCRIPTION
Mt is a user interface to the magnetic tape commands described in mtio(4). It allows one to space a tape forwards or backwards, write end
of file markers, etc.
With the -f option a tape device can be named, otherwise the environment variable TAPE is used if set, otherwise the default device
/dev/nrst4 is assumed. Standard input is used if the tape name is a dash (-). The count argument is used to tell how many blocks or files
to space or how many file markers to write. It may be a C-style decimal, octal or hexadecimal constant, by default "1".
Command is the action to perform, it may be one of the following, or any unambiguous prefix (like st for status):
eof, weof Write count end-of-file markers.
fsf Forward space count file markers.
fsr Forward space count records. (The size of a record depends on the tape, and may even be variable, depending on the size of
the writes.)
bsf Backwards space count files. The count may be zero to backspace to the start of the current file. (A tape device need not
support backwards movement, or may be very slow doing it. Rewinding and forward spacing may be better.)
bsr Backwards space count records. The tape is positioned after the last block of the previous file if you hit a filemark when
spacing backwards. The block count is set to -1 to indicate that the driver has no idea where it is on the previous file.
eom Forward space to the end of media.
rewind Rewind the tape.
offline, rewoffl
Rewind and take offline. This may cause some drives to eject the tape.
status Shows the status of the drive, the sense key of the last SCSI error, current file number, current record number, residual
count if the last command that encountered end-of-file, and the current block size.
retension Removes tape tension by winding and rewinding the tape completely.
erase Erases the tape completely and rewinds it.
density Sets the density code to read or write the tape to count. Density codes supported depend on the drive. This command need
not be used if the drive senses the proper density on read and can only write one density.
blksize, blocksize
Sets the block size used to read or write the tape to count. This command may be used to select a fixed block size for a
variable block size tape. This will speed up I/O for small block sizes. Use a zero count to use variable sized blocks
again.
ENVIRONMENT
TAPE Tape drive to use if set.
FILES
/dev/nrst4 Default tape device.
SEE ALSO mtio(4), st(4).
AUTHOR
Kees J. Bot (kjb@cs.vu.nl)
MT(1)
