7 More Discussions You Might Find Interesting
1. Solaris
Hi everyone,
I have a big problem and i hope u can help me. I have brand new sun server X4-2 with Solaris 10-update 10. I have to install oracle StorageTek but there is no guide or help on the internet. Can anybody help me?
CU (1 Reply)
Discussion started by: selocan
1 Replies
2. Hardware
Hi,
I recently got StoragaTek 2500 and I would like to connect it to my solaris machine, since I don't have much experience with storages, could someone point me how to do so, how can i present disks from storage on my solaris os? (everything is already connected)
thanks in advance (1 Reply)
Discussion started by: sprehodec
1 Replies
3. Hardware
Hi Guys and Gals,
Wionder if you could help me, got a problem with a controller on a storagetek 2540, dead when fully powered up but if you reboot, it is ok for a couple of seconds (and you can ping it). Then once the array is fully up, it goes faulty and is un-pingable.
Had anyone... (4 Replies)
Discussion started by: callmebob
4 Replies
4. Hardware
Hello all !
I am a beginner about system and networking , and after some research on internet , i didn't find any relevant information , so i post here , if someone have an experience with this kind of material or if some documentation about how to connect my storage device on my server.
I... (2 Replies)
Discussion started by: acorradi
2 Replies
5. Solaris
Hi peeps,
Was wondering if anyone can help me, got a couple of storagetek 2540's that I need to configure. Trouble is I think they were brought as second user as all that came with them was cables.
Does anyone know how to configure them (i.e. create raid sets and map to Luns and present... (1 Reply)
Discussion started by: callmebob
1 Replies
6. AIX
Hi,
I have recently purchase a SUN Storage Tek desktop LTO 4 HH tape drive and connected to a IBM AIX 5.1 server.
The server can detect the tape device.
Can someone please advice urgently.
Thanks (4 Replies)
Discussion started by: Caully
4 Replies
7. Solaris
We're moving our production 3510FC to development, so we need to replace the production 3510FC. The 6140 is nice, but pricey.
Here's the question: Would two 2540's (RAID 10) be 'faster' than one 3510? (RAID 10) and faster than one 6140 (RAID 10)?
One StoregeTek 6140 (16x72GB 15k rpm fc-al... (12 Replies)
Discussion started by: buddhavelvet
12 Replies
Validation::Class::Exporter(3pm) User Contributed Perl Documentation Validation::Class::Exporter(3pm)
NAME
Validation::Class::Exporter - Simple Exporter for Validation::Class Classes
VERSION
version 7.70
SYNOPSIS
package MyApp::Class;
use Validation::Class;
use Validation::Class::Exporter;
Validation::Class::Exporter->apply_spec(
routines => ['thing'], # export routines as is
settings => [ ... ] # passed to the "load" method, see Validation::Class
);
has foo => 0;
bld sub {
shift->foo(1);
};
sub thing {
my $args = pop;
my $class = shift || caller;
# routine as a keyword
$class->{config}->{THING} = [$args];
};
package MyApp::Example;
use MyApp::Class;
thing ['this' => 'that'];
package main;
my $eg = MyApp::Example->new; # we have lift-off!!!
DESCRIPTION
This module (while experimental) encapsulates the exporting of keywords and routines. It applies the Validation::Class framework along with
any keyword routines and/or sub-routines specified with the apply_spec() method. It does this by simply by copying the spec into the
calling class.
To simplify writing exporter modules, "Validation::Class::Exporter" also imports "strict" and "warnings" into your exporter module, as well
as into modules that use it.
METHODS
apply_spec
When you call this method, "Validation::Class::Exporter" builds a custom "import" method on the calling class. The "import" method will
export the functions you specify, and can also automatically export "Validation::Class" making the calling class a Validation::Class
derived class.
This method accepts the following parameters:
o routines => [ ... ]
This list of function names only will be exported into the calling class exactly as is, the functions can be used traditionally or
as keywords so their parameter handling should be configured accordingly.
o settings => [ ... ]
This list of key/value pair will be passed to the load method imported from "Validation::Class::load" and will be applied on the
calling class.
This approach affords you some trickery in that you can utilize the load method to apply the current class' configuration to the
calling class' configuration, etc.
AUTHOR
Al Newkirk <anewkirk@ana.io>
COPYRIGHT AND LICENSE
This software is copyright (c) 2011 by Al Newkirk.
This is free software; you can redistribute it and/or modify it under the same terms as the Perl 5 programming language system itself.
perl v5.14.2 2012-06-28 Validation::Class::Exporter(3pm)
