I have used ioscan -fnC tape and the system identified the tape drive. what is the command to show a listing of what is on the tape? I have used ls /dev/rmt/rmt0 to no avail. can anyone help?
Thanks in advance (10 Replies)
Hey folks,
Linux admin here, forced to use Opensolaris to try to use ufsdump/ufsrestore to get some data of some old tapes.
I've got Opensolaris 2009.06 on x86 and a Sony SDX-700V.
As a "control" experiment, I booted the system with a Linux live CD and the tape drive worked perfectly.
... (2 Replies)
Hi,
I have recently purchase a SUN Storage Tek desktop LTO 4 HH tape drive and connected to a IBM AIX 5.1 server.
The server can detect the tape device.
Can someone please advice urgently.
Thanks (4 Replies)
Dear all,
I have ultriam3 tape. It is connected my LPAR. I have that the Sl.Nos. and slot number. but run the cfmgr i am not getting the tape drive.
I have fired the command lsdev -Cc tape but no reply.
how will i configure the tape in LPAR?
Please suggest. It is very urgent. (3 Replies)
I have tape drive in one Lpar. when i saw that time tape is in defined state. After that i deleted the tape drive using the rmdev -R command. Then fired the cfgmgr -v command. But I am not getting the tape drive. Now the drive is even not in defined state also. It is not shown the tape drive. How... (1 Reply)
Hi all,
I need to write on a tape drive with AIX5.3.
How to know the name of this tape and what is the procedure to read and write on this tape?
Regards,
Tovo (2 Replies)
Hi,
I need to restore my tape backup, when I type "tape status" it gives;
status : ready beginning-of-tape write-protected
soft errors : 0
hard errors : 0
underruns : 3
but... (4 Replies)
BUTC_LOGS(5) AFS File Reference BUTC_LOGS(5)NAME
butc_logs - Message logs from the Tape Coordinator process
DESCRIPTION
The Backup System Tape Coordinator (butc) process generates two log files per device, one for error messages and one for actions.
Error Message Log
The TE_device_name file logs error messages generated by the Backup System Tape Coordinator that controls the tape device or backup data
file indicated by device_name.
As the Tape Coordinator initializes, it creates the file in ASCII format in the /var/lib/openafs/backup directory. If there is an existing
file, the Tape Coordinator renames it to TE_device_name.old>, overwriting the existing TE_device_name.old> file if it exists.
For a tape device, the Tape Coordinator derives the variable device_name portion of the filename from the device pathname listed in the
local /var/lib/openafs/backup/tapeconfig file, by stripping off the initial "/dev/" string and replacing any other slashes in the name with
underscores. For example, the filename for a device called /dev/rmt/4m is TE_rmt_4m. Similarly, for a backup data file the Tape Coordinator
strips off the initial slash ("/") and replaces any other slashes in the name with underscores. For example, the filename for a backup data
file called /var/tmp/FILE is TE_var_tmp_FILE.
The messages in the file describe the error and warning conditions the Tape Coordinator encounters as it operates. For instance, a message
can list the volumes that are inaccessible during a dump operation, or warn that the Tape Coordinator is overwriting a tape or backup data
file. The messages also appear in the /var/lib/openafs/backup/TL_device_name file, which traces most of the Tape Coordinator's actions.
Action Log
The TL_device_name file logs the actions performed by the Backup System Tape Coordinator that controls the tape device or backup data file
indicated by device_name. It also records the same error and warning messages written to the TE_device_name file.
As the Tape Coordinator initializes, it creates the file in ASCII format in the /var/lib/openafs/backup directory. If there is an existing
file, the Tape Coordinator renames it to TL_device_name.old, overwriting the existing TL_device_name.old file if it exists.
For a tape device, the Tape Coordinator derives the variable device_name portion of the filename from the device pathname listed in the
local /var/lib/openafs/backup/tapeconfig file, by stripping off the initial "/dev/" string and replacing any other slashes in the name with
underscores. For example, the filename for a device called /dev/rmt/4m is TL_rmt_4m. Similarly, for a backup data file the Tape Coordinator
strips off the initial slash ("/") and replaces any other slashes in the name with underscores. For example, the filename for a backup data
file called /var/tmp/FILE is TL_var_tmp_FILE.
SEE ALSO tapeconfig(5), butc(8)COPYRIGHT
IBM Corporation 2000. <http://www.ibm.com/> All Rights Reserved.
This documentation is covered by the IBM Public License Version 1.0. It was converted from HTML to POD by software written by Chas
Williams and Russ Allbery, based on work by Alf Wachsmann and Elizabeth Cassell.
OpenAFS 2012-03-26 BUTC_LOGS(5)
