How can i get network information

8 More Discussions You Might Find Interesting

1. IP Networking

I would like to monitor network traffic for a computer on my network

My son does homework on a school laptop. I was thinking about setting up a gateway on my home network, so that I can monitor web traffic and know if he is doing his homework without standing over his shoulder. Ideally I would like to use the Raspberry Pi Model b that I already have. However, I...

2. Red Hat

Network becomes slow and return fast only after restart network

Hi, I have 2 machines in production environment: 1. redhat machine for application 2. DB machine (oracle) The application doing a lot of small read&writes from and to the DB machine. The problem is that after some few hours the network from the application to the DB becomes very slow and...

3. Solaris

No network cable But Network interface is UP and Running

I've one Netra 240 After changing main board and system configuration card reader, Network is not accessible any more, Network interfaces are always UP and Running even when there is no cable connected to Network interfaces. I tried to restart and plumb/unplumb with no luck. ifconfig -a...

4. Solaris

configure zones to have different network interface and network

i need to configure a zone to use different interface (bge2) than global and have connected to completely different network switch & to use its own defaultrouter and hosts file .. is it possible ..if so ..how ? Thanks

5. UNIX for Dummies Questions & Answers

Information on Network engineer and Unix Systems Engineer

Hi, I'm exploring a few different careers( Unix System's Admin, Network Engineer, and Unix System's Engineer). I asked in another thread about System's Admin, so I have some more info on that already. I'm not finding very much info on Network Engineers or Unix System Engineers though. Can you guys...

6. IP Networking

ssh server is attachable from local network not from another network

hello i have a ubuntu ssh server that i can acess from any of my comnputers but only if they are on the same wireless network as the server. i tested trhis my tehtehring my samsung blackjack to my windows partition and installing openssh to windows it works when windows is on the wireless but no...

7. Programming

Help in developing a Network Appliation to monitor pc in a network

I am developing a Network Appliation to monitor computers in a network. Specs are App monitors the current web page viewed in each system App also can shutdown the computer in the network App can show all process run by each computer in the network I am now confused how to start my...

8. HP-UX

network information

Hello Guys! I am new from unix and I have a litle knowledge to some of the commands. my query is how can I view the network configuration of the station like the IP address, the NIS name , DNS etc. in windows we can get this info with the command ifconfig /all thanks,

LEARN ABOUT DEBIAN

ping6

PING6(1)							   User Commands							  PING6(1)

NAME

       ping6 - Packets to network hosts

SYNOPSIS

       ping6 [OPTION...] HOST ...

DESCRIPTION

       Send ICMP ECHO_REQUEST packets to network hosts.

	      Options valid for all request types:

       -c, --count=NUMBER
	      stop after sending NUMBER packets

       -d, --debug
	      set the SO_DEBUG option

       -i, --interval=NUMBER
	      wait NUMBER seconds between sending each packet

       -n, --numeric
	      do not resolve host addresses

       -r, --ignore-routing
	      send directly to a host on an attached network

       -w, --timeout=N
	      stop after N seconds

	      Options valid for --echo requests:

       -f, --flood
	      flood ping (root only)

       -l, --preload=NUMBER
	      send NUMBER packets as fast as possible before falling into normal mode of behavior (root only)

       -p, --pattern=PATTERN
	      fill ICMP packet with given pattern (hex)

       -q, --quiet
	      quiet output

       -s, --size=NUMBER
	      send NUMBER data octets

       -?, --help
	      give this help list

       --usage
	      give a short usage message

       -V, --version
	      print program version

       Mandatory or optional arguments to long options are also mandatory or optional for any corresponding short options.

       Options marked with (root only) are available only to superuser.

AUTHOR

       Written by Jeroen Dekkers.

REPORTING BUGS

       Report bugs to <bug-inetutils@gnu.org>.

COPYRIGHT

       Copyright (C) 2011 Free Software Foundation, Inc.  License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>.
       This is free software: you are free to change and redistribute it.  There is NO WARRANTY, to the extent permitted by law.

SEE ALSO

       The  full  documentation  for ping6 is maintained as a Texinfo manual.  If the info and ping6 programs are properly installed at your site,
       the command

	      info ping6

       should give you access to the complete manual.

GNU inetutils 1.9						   December 2011							  PING6(1)

HP-UX