XIRC2PS_CS(4) Kernel Interfaces Manual XIRC2PS_CS(4)
NAME
xirc2ps_cs - Xircom CE2ps (and newer) device driver
SYNOPSIS
insmod xirc2ps_cs.o [pc_debug=n] [full_duplex=n] [irq_list=i,j,...] [if_port=n] [lockup_hack=n]
DESCRIPTION
xirc2ps_cs is the low-level Card Services driver for the Xircom 16-bit PCMCIA ethernet adapters. When this driver is attached to a card,
it allocates the next available ethernet device.
PARAMETERS
pc_debug=n
Selects the PCMCIA debugging level. This parameter is only available if the module is compiled with debugging enabled. A non-zero
value enables debugging.
if_port=n
Selects the transceiver type, for some CE3B-100 cards that lack the ability to autonegotiate. For such cards, a value of 1 selects
10baseT, and 4 selects 100baseT.
full_duplex=n
Selects full duplex mode. The default is 0 (half duplex).
irq_list=i,j,...
Specifies the set of interrupts that may be allocated by this driver.
lockup_hack=n
Enables a hack to avoid lockups on some cards. Use this only if you really have lockup problems with your card.
SEE ALSO
cardmgr(8), pcmcia(5).
BUGS
Please report to <xircom-bugs@isil.d.shuttle.de>
AUTHOR
Werner Koch <werner.koch@guug.de>
1.5 1998/09/15 12:40:59 XIRC2PS_CS(4)
