redhat man page for ibmtr_cs

IBMTR_CS(4)						     Kernel Interfaces Manual						       IBMTR_CS(4)

NAME
       ibmtr_cs - IBM Token Ring PCMCIA device driver

SYNOPSIS
       insmod ibmtr_cs.o [pc_debug=n] [mmiobase=n] [srambase=n] [ringspeed=n] [irq_list=i,j,...]

DESCRIPTION
       ibmtr_cs  is  the  low-level Card Services driver for the IBM Token Ring network adapter and a few very similar cards.  When this driver is
       attached to a card, it allocates the next available token ring interface (tr0..tr#).  This device name will be reported in the  kernel  log
       file, and passed on to cardmgr(8).

       Due  to awkward design of the kernel ibmtr driver, the shared packet memory for these cards must be mapped to a memory address below 1MB or
       0x100000.  The PCMCIA software will attempt to do this automatically, but the automatic algorithm may  choose  values  that  conflict  with
       other  system devices, so a manual override with the srambase parameter may be required.  The memory-mapped IO window generally will not be
       a problem.

PARAMETERS
       pc_debug=n
	      Selects the PCMCIA debugging level.  This parameter is only available if the module is compiled with debugging enabled.  A  non-zero
	      value enables debugging.

       mmiobase=n
	      Specifies a fixed address for the card's memory mapped IO window.  The default is to select any available memory window.

       srambase=n
	      Specifies a fixed address for the card's shared packet memory.  The default is to select any available window below 1MB.

       ringspeed=n
	      Selects the network speed, in mb/sec.  Valid values are 4 or 16, and the default is 16.

AUTHOR
       David Hinds - dahinds@users.sourceforge.net

SEE ALSO
       cardmgr(8), pcmcia(5), ifport(8).

pcmcia-cs							2000/06/12 21:24:47						       IBMTR_CS(4)