centos man page for sane-magicolor

sane-magicolor(5)					   SANE Scanner Access Now Easy 					 sane-magicolor(5)

NAME
       sane-magicolor - SANE backend for KONICA MINOLTA magicolor scanners

DESCRIPTION
       The sane-magicolor backend supports KONICA MINOLTA magicolor scanners connected via USB or LAN. Currently, only the magicolor 1690MF device
       is supported, no other devices with the same scanning protocol are known.

SUPPORTED DEVICES
       The following scanner should work with this backend:

       Device Details
       -----------------------------
       Vendor: KONICA MINOLTA
       Model: magicolor 1690MF

CONFIGURATION
       This section describes the backend's configuration file entries. The file is located at:

	      /etc/sane.d/magicolor.conf

       For a proper setup, at least one of the following entries are needed:

	      net autodiscovery
	      net [IP ADDRESS] [DEVICE-ID]
	      usb
	      usb [VENDOR-ID] [DEVICE-ID]

FILES
       /etc/sane.d/magicolor.conf
	      The backend configuration file

       /usr/lib64/sane/libsane-magicolor.a
	      The static library implementing this backend.

       /usr/lib64/sane/libsane-magicolor.so
	      The shared library implementing this backend (present on systems that support dynamic loading).

ENVIRONMENT
       SANE_CONFIG_DIR
	      This environment variable specifies the list of directories that may contain the configuration file.  Under  UNIX,  the  directories
	      are  separated  by a colon (`:'), under OS/2, they are separated by a semi-colon (`;').  If this variable is not set, the configura-
	      tion file is searched in two default directories: first, the current working directory (".") and then in /etc/sane.d.  If the  value
	      of the environment variable ends with the directory separator character, then the default directories are searched after the explic-
	      itly specified directories.  For example, setting SANE_CONFIG_DIR to "/tmp/config:" would result in directories "/tmp/config",  ".",
	      and "/etc/sane.d" being searched (in this order).

       SANE_DEBUG_MAGICOLOR
	      If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend.  Higher
	      debug levels increase the verbosity of the output.

	      Example: export SANE_DEBUG_MAGICOLOR=127

	      To obtain debug messages from the backend, set this environment variable before calling your favorite frontend (e.g. xscanimage).

	      Example: SANE_DEBUG_MAGICOLOR=65 xscanimage

KNOWN BUGS AND RESTRICTIONS
       Large color scans may sometimes timeout due to unknown reasons (the scanner simply stops returning data)

       Cancelling large scans may lock up the scanner.

SEE ALSO
       sane(7),
       http://wiki.kainhofer.com/hardware/magicolor_scan

AUTHOR
       Reinhold Kainhofer <reinhold@kainhofer.com>

								    10 Jan 2011 						 sane-magicolor(5)