bsd gcc man page on unix.com

GCC(1) GNU GCC(1)

NAME
gcc - GNU project C and C++ compiler

SYNOPSIS
gcc [-c|-S|-E] [-std=standard]
[-g] [-pg] [-Olevel]
[-Wwarn...] [-Wpedantic]
[-Idir...] [-Ldir...]
[-Dmacro[=defn]...] [-Umacro]
[-foption...] [-mmachine-option...]
[-o outfile] [@file] infile...

Only the most useful options are listed here; see below for the remainder. g++ accepts mostly the same options as gcc.

DESCRIPTION
When you invoke GCC, it normally does preprocessing, compilation, assembly and linking. The "overall options" allow you to stop this
process at an intermediate stage. For example, the -c option says not to run the linker. Then the output consists of object files output
by the assembler.

Other options are passed on to one or more stages of processing. Some options control the preprocessor and others the compiler itself.
Yet other options control the assembler and linker; most of these are not documented here, since you rarely need to use any of them.

Most of the command-line options that you can use with GCC are useful for C programs; when an option is only useful with another language
(usually C++), the explanation says so explicitly. If the description for a particular option does not mention a source language, you can
use that option with all supported languages.

The usual way to run GCC is to run the executable called gcc, or machine-gcc when cross-compiling, or machine-gcc-version to run a specific
version of GCC. When you compile C++ programs, you should invoke GCC as g++ instead.

The gcc program accepts options and file names as operands. Many options have multi-letter names; therefore multiple single-letter options
may not be grouped: -dv is very different from -d -v.

You can mix options and other arguments. For the most part, the order you use doesn't matter. Order does matter when you use several
options of the same kind; for example, if you specify -L more than once, the directories are searched in the order specified. Also, the
placement of the -l option is significant.

Many options have long names starting with -f or with -W---for example, -fmove-loop-invariants, -Wformat and so on. Most of these have
both positive and negative forms; the negative form of -ffoo is -fno-foo. This manual documents only one of these two forms, whichever one
is not the default.

OPTIONS
Option Summary
Here is a summary of all the options, grouped by type. Explanations are in the following sections.

Overall Options
-c -S -E -o file -x language -v -### --help[=class[,...]] --target-help --version -pass-exit-codes -pipe -specs=file
-wrapper @file -fplugin=file -fplugin-arg-name=arg -fdump-ada-spec[-slim] -fada-spec-parent=unit -fdump-go-spec=file

C Language Options
-ansi -std=standard -fgnu89-inline -fpermitted-flt-eval-methods=standard -aux-info filename -fallow-parameterless-variadic-functions
-fno-asm -fno-builtin -fno-builtin-function -fgimple -fhosted -ffreestanding -fopenacc -fopenmp -fopenmp-simd -fms-extensions
-fplan9-extensions -fsso-struct=endianness -fallow-single-precision -fcond-mismatch -flax-vector-conversions -fsigned-bitfields
-fsigned-char -funsigned-bitfields -funsigned-char

C++ Language Options
-fabi-version=n -fno-access-control -faligned-new=n -fargs-in-order=n -fcheck-new -fconstexpr-depth=n -fconstexpr-loop-limit=n
-ffriend-injection -fno-elide-constructors -fno-enforce-eh-specs -ffor-scope -fno-for-scope -fno-gnu-keywords -fno-implicit-templates
-fno-implicit-inline-templates -fno-implement-inlines -fms-extensions -fnew-inheriting-ctors -fnew-ttp-matching -fno-nonansi-builtins
-fnothrow-opt -fno-operator-names -fno-optional-diags -fpermissive -fno-pretty-templates -frepo -fno-rtti -fsized-deallocation
-ftemplate-backtrace-limit=n -ftemplate-depth=n -fno-threadsafe-statics -fuse-cxa-atexit -fno-weak -nostdinc++
-fvisibility-inlines-hidden -fvisibility-ms-compat -fext-numeric-literals -Wabi=n -Wabi-tag -Wconversion-null -Wctor-dtor-privacy
-Wdelete-non-virtual-dtor -Wliteral-suffix -Wmultiple-inheritance -Wnamespaces -Wnarrowing -Wnoexcept -Wnoexcept-type
-Wnon-virtual-dtor -Wreorder -Wregister -Weffc++ -Wstrict-null-sentinel -Wtemplates -Wno-non-template-friend -Wold-style-cast
-Woverloaded-virtual -Wno-pmf-conversions -Wsign-promo -Wvirtual-inheritance

Objective-C and Objective-C++ Language Options
-fconstant-string-class=class-name -fgnu-runtime -fnext-runtime -fno-nil-receivers -fobjc-abi-version=n -fobjc-call-cxx-cdtors
-fobjc-direct-dispatch -fobjc-exceptions -fobjc-gc -fobjc-nilcheck -fobjc-std=objc1 -fno-local-ivars
-fivar-visibility=[public|protected|private|package] -freplace-objc-classes -fzero-link -gen-decls -Wassign-intercept -Wno-protocol
-Wselector -Wstrict-selector-match -Wundeclared-selector

Diagnostic Message Formatting Options
-fmessage-length=n -fdiagnostics-show-location=[once|every-line] -fdiagnostics-color=[auto|never|always] -fno-diagnostics-show-option
-fno-diagnostics-show-caret -fdiagnostics-parseable-fixits -fdiagnostics-generate-patch -fno-show-column

Warning Options
-fsyntax-only -fmax-errors=n -Wpedantic -pedantic-errors -w -Wextra -Wall -Waddress -Waggregate-return -Walloc-zero
-Walloc-size-larger-than=n -Walloca -Walloca-larger-than=n -Wno-aggressive-loop-optimizations -Warray-bounds -Warray-bounds=n
-Wno-attributes -Wbool-compare -Wbool-operation -Wno-builtin-declaration-mismatch -Wno-builtin-macro-redefined -Wc90-c99-compat
-Wc99-c11-compat -Wc++-compat -Wc++11-compat -Wc++14-compat -Wcast-align -Wcast-qual -Wchar-subscripts -Wchkp -Wclobbered
-Wcomment -Wconditionally-supported -Wconversion -Wcoverage-mismatch -Wno-cpp -Wdangling-else -Wdate-time -Wdelete-incomplete
-Wno-deprecated -Wno-deprecated-declarations -Wno-designated-init -Wdisabled-optimization -Wno-discarded-qualifiers
-Wno-discarded-array-qualifiers -Wno-div-by-zero -Wdouble-promotion -Wduplicated-branches -Wduplicated-cond -Wempty-body
-Wenum-compare -Wno-endif-labels -Wexpansion-to-defined -Werror -Werror=* -Wfatal-errors -Wfloat-equal -Wformat -Wformat=2
-Wno-format-contains-nul -Wno-format-extra-args -Wformat-nonliteral -Wformat-overflow=n -Wformat-security -Wformat-signedness
-Wformat-truncation=n -Wformat-y2k -Wframe-address -Wframe-larger-than=len -Wno-free-nonheap-object -Wjump-misses-init
-Wignored-qualifiers -Wignored-attributes -Wincompatible-pointer-types -Wimplicit -Wimplicit-fallthrough -Wimplicit-fallthrough=n
-Wimplicit-function-declaration -Wimplicit-int -Winit-self -Winline -Wno-int-conversion -Wint-in-bool-context
-Wno-int-to-pointer-cast -Winvalid-memory-model -Wno-invalid-offsetof -Winvalid-pch -Wlarger-than=len -Wlogical-op
-Wlogical-not-parentheses -Wlong-long -Wmain -Wmaybe-uninitialized -Wmemset-elt-size -Wmemset-transposed-args
-Wmisleading-indentation -Wmissing-braces -Wmissing-field-initializers -Wmissing-include-dirs -Wno-multichar -Wnonnull
-Wnonnull-compare -Wnormalized=[none|id|nfc|nfkc] -Wnull-dereference -Wodr -Wno-overflow -Wopenmp-simd -Woverride-init-side-effects
-Woverlength-strings -Wpacked -Wpacked-bitfield-compat -Wpadded -Wparentheses -Wno-pedantic-ms-format -Wplacement-new
-Wplacement-new=n -Wpointer-arith -Wpointer-compare -Wno-pointer-to-int-cast -Wno-pragmas -Wredundant-decls -Wrestrict
-Wno-return-local-addr -Wreturn-type -Wsequence-point -Wshadow -Wno-shadow-ivar -Wshadow=global, -Wshadow=local,
-Wshadow=compatible-local -Wshift-overflow -Wshift-overflow=n -Wshift-count-negative -Wshift-count-overflow -Wshift-negative-value
-Wsign-compare -Wsign-conversion -Wfloat-conversion -Wno-scalar-storage-order -Wsizeof-pointer-memaccess -Wsizeof-array-argument
-Wstack-protector -Wstack-usage=len -Wstrict-aliasing -Wstrict-aliasing=n -Wstrict-overflow -Wstrict-overflow=n
-Wstringop-overflow=n -Wsuggest-attribute=[pure|const|noreturn|format] -Wsuggest-final-types -Wsuggest-final-methods
-Wsuggest-override -Wmissing-format-attribute -Wsubobject-linkage -Wswitch -Wswitch-bool -Wswitch-default -Wswitch-enum
-Wswitch-unreachable -Wsync-nand -Wsystem-headers -Wtautological-compare -Wtrampolines -Wtrigraphs -Wtype-limits -Wundef
-Wuninitialized -Wunknown-pragmas -Wunsafe-loop-optimizations -Wunsuffixed-float-constants -Wunused -Wunused-function
-Wunused-label -Wunused-local-typedefs -Wunused-macros -Wunused-parameter -Wno-unused-result -Wunused-value -Wunused-variable
-Wunused-const-variable -Wunused-const-variable=n -Wunused-but-set-parameter -Wunused-but-set-variable -Wuseless-cast
-Wvariadic-macros -Wvector-operation-performance -Wvla -Wvla-larger-than=n -Wvolatile-register-var -Wwrite-strings
-Wzero-as-null-pointer-constant -Whsa

C and Objective-C-only Warning Options
-Wbad-function-cast -Wmissing-declarations -Wmissing-parameter-type -Wmissing-prototypes -Wnested-externs -Wold-style-declaration
-Wold-style-definition -Wstrict-prototypes -Wtraditional -Wtraditional-conversion -Wdeclaration-after-statement -Wpointer-sign

Debugging Options
-g -glevel -gcoff -gdwarf -gdwarf-version -ggdb -grecord-gcc-switches -gno-record-gcc-switches -gstabs -gstabs+ -gstrict-dwarf
-gno-strict-dwarf -gcolumn-info -gno-column-info -gvms -gxcoff -gxcoff+ -gz[=type] -fdebug-prefix-map=old=new
-fdebug-types-section -feliminate-dwarf2-dups -fno-eliminate-unused-debug-types -femit-struct-debug-baseonly
-femit-struct-debug-reduced -femit-struct-debug-detailed[=spec-list] -feliminate-unused-debug-symbols -femit-class-debug-always
-fno-merge-debug-strings -fno-dwarf2-cfi-asm -fvar-tracking -fvar-tracking-assignments

Optimization Options
-faggressive-loop-optimizations -falign-functions[=n] -falign-jumps[=n] -falign-labels[=n] -falign-loops[=n] -fassociative-math
-fauto-profile -fauto-profile[=path] -fauto-inc-dec -fbranch-probabilities -fbranch-target-load-optimize
-fbranch-target-load-optimize2 -fbtr-bb-exclusive -fcaller-saves -fcombine-stack-adjustments -fconserve-stack -fcompare-elim
-fcprop-registers -fcrossjumping -fcse-follow-jumps -fcse-skip-blocks -fcx-fortran-rules -fcx-limited-range -fdata-sections -fdce
-fdelayed-branch -fdelete-null-pointer-checks -fdevirtualize -fdevirtualize-speculatively -fdevirtualize-at-ltrans -fdse
-fearly-inlining -fipa-sra -fexpensive-optimizations -ffat-lto-objects -ffast-math -ffinite-math-only -ffloat-store
-fexcess-precision=style -fforward-propagate -ffp-contract=style -ffunction-sections -fgcse -fgcse-after-reload -fgcse-las
-fgcse-lm -fgraphite-identity -fgcse-sm -fhoist-adjacent-loads -fif-conversion -fif-conversion2 -findirect-inlining
-finline-functions -finline-functions-called-once -finline-limit=n -finline-small-functions -fipa-cp -fipa-cp-clone -fipa-bit-cp
-fipa-vrp -fipa-pta -fipa-profile -fipa-pure-const -fipa-reference -fipa-icf -fira-algorithm=algorithm -fira-region=region
-fira-hoist-pressure -fira-loop-pressure -fno-ira-share-save-slots -fno-ira-share-spill-slots -fisolate-erroneous-paths-dereference
-fisolate-erroneous-paths-attribute -fivopts -fkeep-inline-functions -fkeep-static-functions -fkeep-static-consts
-flimit-function-alignment -flive-range-shrinkage -floop-block -floop-interchange -floop-strip-mine -floop-unroll-and-jam
-floop-nest-optimize -floop-parallelize-all -flra-remat -flto -flto-compression-level -flto-partition=alg -fmerge-all-constants
-fmerge-constants -fmodulo-sched -fmodulo-sched-allow-regmoves -fmove-loop-invariants -fno-branch-count-reg -fno-defer-pop
-fno-fp-int-builtin-inexact -fno-function-cse -fno-guess-branch-probability -fno-inline -fno-math-errno -fno-peephole
-fno-peephole2 -fno-printf-return-value -fno-sched-interblock -fno-sched-spec -fno-signed-zeros -fno-toplevel-reorder
-fno-trapping-math -fno-zero-initialized-in-bss -fomit-frame-pointer -foptimize-sibling-calls -fpartial-inlining -fpeel-loops
-fpredictive-commoning -fprefetch-loop-arrays -fprofile-correction -fprofile-use -fprofile-use=path -fprofile-values
-fprofile-reorder-functions -freciprocal-math -free -frename-registers -freorder-blocks -freorder-blocks-algorithm=algorithm
-freorder-blocks-and-partition -freorder-functions -frerun-cse-after-loop -freschedule-modulo-scheduled-loops -frounding-math
-fsched2-use-superblocks -fsched-pressure -fsched-spec-load -fsched-spec-load-dangerous -fsched-stalled-insns-dep[=n]
-fsched-stalled-insns[=n] -fsched-group-heuristic -fsched-critical-path-heuristic -fsched-spec-insn-heuristic -fsched-rank-heuristic
-fsched-last-insn-heuristic -fsched-dep-count-heuristic -fschedule-fusion -fschedule-insns -fschedule-insns2 -fsection-anchors
-fselective-scheduling -fselective-scheduling2 -fsel-sched-pipelining -fsel-sched-pipelining-outer-loops -fsemantic-interposition
-fshrink-wrap -fshrink-wrap-separate -fsignaling-nans -fsingle-precision-constant -fsplit-ivs-in-unroller -fsplit-loops
-fsplit-paths -fsplit-wide-types -fssa-backprop -fssa-phiopt -fstdarg-opt -fstore-merging -fstrict-aliasing -fstrict-overflow
-fthread-jumps -ftracer -ftree-bit-ccp -ftree-builtin-call-dce -ftree-ccp -ftree-ch -ftree-coalesce-vars -ftree-copy-prop
-ftree-dce -ftree-dominator-opts -ftree-dse -ftree-forwprop -ftree-fre -fcode-hoisting -ftree-loop-if-convert -ftree-loop-im
-ftree-phiprop -ftree-loop-distribution -ftree-loop-distribute-patterns -ftree-loop-ivcanon -ftree-loop-linear -ftree-loop-optimize
-ftree-loop-vectorize -ftree-parallelize-loops=n -ftree-pre -ftree-partial-pre -ftree-pta -ftree-reassoc -ftree-sink -ftree-slsr
-ftree-sra -ftree-switch-conversion -ftree-tail-merge -ftree-ter -ftree-vectorize -ftree-vrp -funconstrained-commons
-funit-at-a-time -funroll-all-loops -funroll-loops -funsafe-math-optimizations -funswitch-loops -fipa-ra
-fvariable-expansion-in-unroller -fvect-cost-model -fvpt -fweb -fwhole-program -fwpa -fuse-linker-plugin --param name=value -O
-O0 -O1 -O2 -O3 -Os -Ofast -Og

Program Instrumentation Options
-p -pg -fprofile-arcs --coverage -ftest-coverage -fprofile-dir=path -fprofile-generate -fprofile-generate=path -fsanitize=style
-fsanitize-recover -fsanitize-recover=style -fasan-shadow-offset=number -fsanitize-sections=s1,s2,...
-fsanitize-undefined-trap-on-error -fbounds-check -fcheck-pointer-bounds -fchkp-check-incomplete-type
-fchkp-first-field-has-own-bounds -fchkp-narrow-bounds -fchkp-narrow-to-innermost-array -fchkp-optimize
-fchkp-use-fast-string-functions -fchkp-use-nochk-string-functions -fchkp-use-static-bounds -fchkp-use-static-const-bounds
-fchkp-treat-zero-dynamic-size-as-infinite -fchkp-check-read -fchkp-check-read -fchkp-check-write -fchkp-store-bounds
-fchkp-instrument-calls -fchkp-instrument-marked-only -fchkp-use-wrappers -fchkp-flexible-struct-trailing-arrays -fstack-protector
-fstack-protector-all -fstack-protector-strong -fstack-protector-explicit -fstack-check -fstack-limit-register=reg
-fstack-limit-symbol=sym -fno-stack-limit -fsplit-stack -fvtable-verify=[std|preinit|none] -fvtv-counts -fvtv-debug
-finstrument-functions -finstrument-functions-exclude-function-list=sym,sym,... -finstrument-functions-exclude-file-list=file,file,...

Preprocessor Options
-Aquestion=answer -A-question[=answer] -C -CC -Dmacro[=defn] -dD -dI -dM -dN -dU -fdebug-cpp -fdirectives-only
-fdollars-in-identifiers -fexec-charset=charset -fextended-identifiers -finput-charset=charset -fno-canonical-system-headers
-fpch-deps -fpch-preprocess -fpreprocessed -ftabstop=width -ftrack-macro-expansion -fwide-exec-charset=charset -fworking-directory
-H -imacros file -include file -M -MD -MF -MG -MM -MMD -MP -MQ -MT -no-integrated-cpp -P -pthread -remap -traditional
-traditional-cpp -trigraphs -Umacro -undef -Wp,option -Xpreprocessor option

Assembler Options
-Wa,option -Xassembler option

Linker Options
object-file-name -fuse-ld=linker -llibrary -nostartfiles -nodefaultlibs -nostdlib -pie -pthread -rdynamic -s -static
-static-libgcc -static-libstdc++ -static-libasan -static-libtsan -static-liblsan -static-libubsan -static-libmpx
-static-libmpxwrappers -shared -shared-libgcc -symbolic -T script -Wl,option -Xlinker option -u symbol -z keyword

Directory Options
-Bprefix -Idir -I- -idirafter dir -imacros file -imultilib dir -iplugindir=dir -iprefix file -iquote dir -isysroot dir -isystem
dir -iwithprefix dir -iwithprefixbefore dir -Ldir -no-canonical-prefixes --no-sysroot-suffix -nostdinc -nostdinc++ --sysroot=dir

Code Generation Options
-fcall-saved-reg -fcall-used-reg -ffixed-reg -fexceptions -fnon-call-exceptions -fdelete-dead-exceptions -funwind-tables
-fasynchronous-unwind-tables -fno-gnu-unique -finhibit-size-directive -fno-common -fno-ident -fpcc-struct-return -fpic -fPIC -fpie
-fPIE -fno-plt -fno-jump-tables -frecord-gcc-switches -freg-struct-return -fshort-enums -fshort-wchar -fverbose-asm
-fpack-struct[=n] -fleading-underscore -ftls-model=model -fstack-reuse=reuse_level -ftrampolines -ftrapv -fwrapv
-fvisibility=[default|internal|hidden|protected] -fstrict-volatile-bitfields -fsync-libcalls

Developer Options
-dletters -dumpspecs -dumpmachine -dumpversion -dumpfullversion -fchecking -fchecking=n -fdbg-cnt-list -fdbg-cnt=counter-value-
list -fdisable-ipa-pass_name -fdisable-rtl-pass_name -fdisable-rtl-pass-name=range-list -fdisable-tree-pass_name -fdisable-tree-pass-
name=range-list -fdump-noaddr -fdump-unnumbered -fdump-unnumbered-links -fdump-translation-unit[-n] -fdump-class-hierarchy[-n]
-fdump-ipa-all -fdump-ipa-cgraph -fdump-ipa-inline -fdump-passes -fdump-rtl-pass -fdump-rtl-pass=filename -fdump-statistics
-fdump-final-insns[=file] -fdump-tree-all -fdump-tree-switch -fdump-tree-switch-options -fdump-tree-switch-options=filename
-fcompare-debug[=opts] -fcompare-debug-second -fenable-kind-pass -fenable-kind-pass=range-list -fira-verbose=n -flto-report
-flto-report-wpa -fmem-report-wpa -fmem-report -fpre-ipa-mem-report -fpost-ipa-mem-report -fopt-info -fopt-info-options[=file]
-fprofile-report -frandom-seed=string -fsched-verbose=n -fsel-sched-verbose -fsel-sched-dump-cfg -fsel-sched-pipelining-verbose
-fstats -fstack-usage -ftime-report -ftime-report-details -fvar-tracking-assignments-toggle -gtoggle -print-file-name=library
-print-libgcc-file-name -print-multi-directory -print-multi-lib -print-multi-os-directory -print-prog-name=program
-print-search-dirs -Q -print-sysroot -print-sysroot-headers-suffix -save-temps -save-temps=cwd -save-temps=obj -time[=file]

Machine-Dependent Options
AArch64 Options -mabi=name -mbig-endian -mlittle-endian -mgeneral-regs-only -mcmodel=tiny -mcmodel=small -mcmodel=large
-mstrict-align -momit-leaf-frame-pointer -mno-omit-leaf-frame-pointer -mtls-dialect=desc -mtls-dialect=traditional -mtls-size=size
-mfix-cortex-a53-835769 -mno-fix-cortex-a53-835769 -mfix-cortex-a53-843419 -mno-fix-cortex-a53-843419 -mlow-precision-recip-sqrt
-mno-low-precision-recip-sqrt -mlow-precision-sqrt -mno-low-precision-sqrt -mlow-precision-div -mno-low-precision-div -march=name
-mcpu=name -mtune=name

Adapteva Epiphany Options -mhalf-reg-file -mprefer-short-insn-regs -mbranch-cost=num -mcmove -mnops=num -msoft-cmpsf -msplit-lohi
-mpost-inc -mpost-modify -mstack-offset=num -mround-nearest -mlong-calls -mshort-calls -msmall16 -mfp-mode=mode -mvect-double
-max-vect-align=num -msplit-vecmove-early -m1reg-reg

ARC Options -mbarrel-shifter -mcpu=cpu -mA6 -mARC600 -mA7 -mARC700 -mdpfp -mdpfp-compact -mdpfp-fast -mno-dpfp-lrsr -mea
-mno-mpy -mmul32x16 -mmul64 -matomic -mnorm -mspfp -mspfp-compact -mspfp-fast -msimd -msoft-float -mswap -mcrc -mdsp-packa
-mdvbf -mlock -mmac-d16 -mmac-24 -mrtsc -mswape -mtelephony -mxy -misize -mannotate-align -marclinux -marclinux_prof
-mlong-calls -mmedium-calls -msdata -mvolatile-cache -mtp-regno=regno -malign-call -mauto-modify-reg -mbbit-peephole -mno-brcc
-mcase-vector-pcrel -mcompact-casesi -mno-cond-exec -mearly-cbranchsi -mexpand-adddi -mindexed-loads -mlra -mlra-priority-none
-mlra-priority-compact mlra-priority-noncompact -mno-millicode -mmixed-code -mq-class -mRcq -mRcw -msize-level=level -mtune=cpu
-mmultcost=num -munalign-prob-threshold=probability -mmpy-option=multo -mdiv-rem -mcode-density -mll64 -mfpu=fpu

ARM Options -mapcs-frame -mno-apcs-frame -mabi=name -mapcs-stack-check -mno-apcs-stack-check -mapcs-reentrant -mno-apcs-reentrant
-msched-prolog -mno-sched-prolog -mlittle-endian -mbig-endian -mfloat-abi=name -mfp16-format=name -mthumb-interwork
-mno-thumb-interwork -mcpu=name -march=name -mfpu=name -mtune=name -mprint-tune-info -mstructure-size-boundary=n -mabort-on-noreturn
-mlong-calls -mno-long-calls -msingle-pic-base -mno-single-pic-base -mpic-register=reg -mnop-fun-dllimport -mpoke-function-name
-mthumb -marm -mtpcs-frame -mtpcs-leaf-frame -mcaller-super-interworking -mcallee-super-interworking -mtp=name
-mtls-dialect=dialect -mword-relocations -mfix-cortex-m3-ldrd -munaligned-access -mneon-for-64bits -mslow-flash-data
-masm-syntax-unified -mrestrict-it -mpure-code -mcmse

AVR Options -mmcu=mcu -mabsdata -maccumulate-args -mbranch-cost=cost -mcall-prologues -mint8 -mn_flash=size -mno-interrupts
-mrelax -mrmw -mstrict-X -mtiny-stack -mfract-convert-truncate -nodevicelib -Waddr-space-convert -Wmisspelled-isr

Blackfin Options -mcpu=cpu[-sirevision] -msim -momit-leaf-frame-pointer -mno-omit-leaf-frame-pointer -mspecld-anomaly
-mno-specld-anomaly -mcsync-anomaly -mno-csync-anomaly -mlow-64k -mno-low64k -mstack-check-l1 -mid-shared-library
-mno-id-shared-library -mshared-library-id=n -mleaf-id-shared-library -mno-leaf-id-shared-library -msep-data -mno-sep-data
-mlong-calls -mno-long-calls -mfast-fp -minline-plt -mmulticore -mcorea -mcoreb -msdram -micplb

C6X Options -mbig-endian -mlittle-endian -march=cpu -msim -msdata=sdata-type

CRIS Options -mcpu=cpu -march=cpu -mtune=cpu -mmax-stack-frame=n -melinux-stacksize=n -metrax4 -metrax100 -mpdebug -mcc-init
-mno-side-effects -mstack-align -mdata-align -mconst-align -m32-bit -m16-bit -m8-bit -mno-prologue-epilogue -mno-gotplt -melf
-maout -melinux -mlinux -sim -sim2 -mmul-bug-workaround -mno-mul-bug-workaround

CR16 Options -mmac -mcr16cplus -mcr16c -msim -mint32 -mbit-ops -mdata-model=model

Darwin Options -all_load -allowable_client -arch -arch_errors_fatal -arch_only -bind_at_load -bundle -bundle_loader -client_name
-compatibility_version -current_version -dead_strip -dependency-file -dylib_file -dylinker_install_name -dynamic -dynamiclib
-exported_symbols_list -filelist -flat_namespace -force_cpusubtype_ALL -force_flat_namespace -headerpad_max_install_names
-iframework -image_base -init -install_name -keep_private_externs -multi_module -multiply_defined -multiply_defined_unused
-noall_load -no_dead_strip_inits_and_terms -nofixprebinding -nomultidefs -noprebind -noseglinkedit -pagezero_size -prebind
-prebind_all_twolevel_modules -private_bundle -read_only_relocs -sectalign -sectobjectsymbols -whyload -seg1addr -sectcreate
-sectobjectsymbols -sectorder -segaddr -segs_read_only_addr -segs_read_write_addr -seg_addr_table -seg_addr_table_filename
-seglinkedit -segprot -segs_read_only_addr -segs_read_write_addr -single_module -static -sub_library -sub_umbrella
-twolevel_namespace -umbrella -undefined -unexported_symbols_list -weak_reference_mismatches -whatsloaded -F -gused -gfull
-mmacosx-version-min=version -mkernel -mone-byte-bool

DEC Alpha Options -mno-fp-regs -msoft-float -mieee -mieee-with-inexact -mieee-conformant -mfp-trap-mode=mode
-mfp-rounding-mode=mode -mtrap-precision=mode -mbuild-constants -mcpu=cpu-type -mtune=cpu-type -mbwx -mmax -mfix -mcix -mfloat-vax
-mfloat-ieee -mexplicit-relocs -msmall-data -mlarge-data -msmall-text -mlarge-text -mmemory-latency=time

FR30 Options -msmall-model -mno-lsim

FT32 Options -msim -mlra -mnodiv

FRV Options -mgpr-32 -mgpr-64 -mfpr-32 -mfpr-64 -mhard-float -msoft-float -malloc-cc -mfixed-cc -mdword -mno-dword -mdouble
-mno-double -mmedia -mno-media -mmuladd -mno-muladd -mfdpic -minline-plt -mgprel-ro -multilib-library-pic -mlinked-fp
-mlong-calls -malign-labels -mlibrary-pic -macc-4 -macc-8 -mpack -mno-pack -mno-eflags -mcond-move -mno-cond-move
-moptimize-membar -mno-optimize-membar -mscc -mno-scc -mcond-exec -mno-cond-exec -mvliw-branch -mno-vliw-branch -mmulti-cond-exec
-mno-multi-cond-exec -mnested-cond-exec -mno-nested-cond-exec -mtomcat-stats -mTLS -mtls -mcpu=cpu

GNU/Linux Options -mglibc -muclibc -mmusl -mbionic -mandroid -tno-android-cc -tno-android-ld

H8/300 Options -mrelax -mh -ms -mn -mexr -mno-exr -mint32 -malign-300

HPPA Options -march=architecture-type -mcaller-copies -mdisable-fpregs -mdisable-indexing -mfast-indirect-calls -mgas -mgnu-ld
-mhp-ld -mfixed-range=register-range -mjump-in-delay -mlinker-opt -mlong-calls -mlong-load-store -mno-disable-fpregs
-mno-disable-indexing -mno-fast-indirect-calls -mno-gas -mno-jump-in-delay -mno-long-load-store -mno-portable-runtime
-mno-soft-float -mno-space-regs -msoft-float -mpa-risc-1-0 -mpa-risc-1-1 -mpa-risc-2-0 -mportable-runtime -mschedule=cpu-type
-mspace-regs -msio -mwsio -munix=unix-std -nolibdld -static -threads

IA-64 Options -mbig-endian -mlittle-endian -mgnu-as -mgnu-ld -mno-pic -mvolatile-asm-stop -mregister-names -msdata -mno-sdata
-mconstant-gp -mauto-pic -mfused-madd -minline-float-divide-min-latency -minline-float-divide-max-throughput -mno-inline-float-divide
-minline-int-divide-min-latency -minline-int-divide-max-throughput -mno-inline-int-divide -minline-sqrt-min-latency
-minline-sqrt-max-throughput -mno-inline-sqrt -mdwarf2-asm -mearly-stop-bits -mfixed-range=register-range -mtls-size=tls-size
-mtune=cpu-type -milp32 -mlp64 -msched-br-data-spec -msched-ar-data-spec -msched-control-spec -msched-br-in-data-spec
-msched-ar-in-data-spec -msched-in-control-spec -msched-spec-ldc -msched-spec-control-ldc -msched-prefer-non-data-spec-insns
-msched-prefer-non-control-spec-insns -msched-stop-bits-after-every-cycle -msched-count-spec-in-critical-path
-msel-sched-dont-check-control-spec -msched-fp-mem-deps-zero-cost -msched-max-memory-insns-hard-limit -msched-max-memory-insns=max-
insns

LM32 Options -mbarrel-shift-enabled -mdivide-enabled -mmultiply-enabled -msign-extend-enabled -muser-enabled

M32R/D Options -m32r2 -m32rx -m32r -mdebug -malign-loops -mno-align-loops -missue-rate=number -mbranch-cost=number -mmodel=code-
size-model-type -msdata=sdata-type -mno-flush-func -mflush-func=name -mno-flush-trap -mflush-trap=number -G num

M32C Options -mcpu=cpu -msim -memregs=number

M680x0 Options -march=arch -mcpu=cpu -mtune=tune -m68000 -m68020 -m68020-40 -m68020-60 -m68030 -m68040 -m68060 -mcpu32 -m5200
-m5206e -m528x -m5307 -m5407 -mcfv4e -mbitfield -mno-bitfield -mc68000 -mc68020 -mnobitfield -mrtd -mno-rtd -mdiv -mno-div
-mshort -mno-short -mhard-float -m68881 -msoft-float -mpcrel -malign-int -mstrict-align -msep-data -mno-sep-data
-mshared-library-id=n -mid-shared-library -mno-id-shared-library -mxgot -mno-xgot -mlong-jump-table-offsets

MCore Options -mhardlit -mno-hardlit -mdiv -mno-div -mrelax-immediates -mno-relax-immediates -mwide-bitfields -mno-wide-bitfields
-m4byte-functions -mno-4byte-functions -mcallgraph-data -mno-callgraph-data -mslow-bytes -mno-slow-bytes -mno-lsim -mlittle-endian
-mbig-endian -m210 -m340 -mstack-increment

MeP Options -mabsdiff -mall-opts -maverage -mbased=n -mbitops -mc=n -mclip -mconfig=name -mcop -mcop32 -mcop64 -mivc2 -mdc
-mdiv -meb -mel -mio-volatile -ml -mleadz -mm -mminmax -mmult -mno-opts -mrepeat -ms -msatur -msdram -msim -msimnovec
-mtf -mtiny=n

MicroBlaze Options -msoft-float -mhard-float -msmall-divides -mcpu=cpu -mmemcpy -mxl-soft-mul -mxl-soft-div -mxl-barrel-shift
-mxl-pattern-compare -mxl-stack-check -mxl-gp-opt -mno-clearbss -mxl-multiply-high -mxl-float-convert -mxl-float-sqrt -mbig-endian
-mlittle-endian -mxl-reorder -mxl-mode-app-model

MIPS Options -EL -EB -march=arch -mtune=arch -mips1 -mips2 -mips3 -mips4 -mips32 -mips32r2 -mips32r3 -mips32r5 -mips32r6
-mips64 -mips64r2 -mips64r3 -mips64r5 -mips64r6 -mips16 -mno-mips16 -mflip-mips16 -minterlink-compressed
-mno-interlink-compressed -minterlink-mips16 -mno-interlink-mips16 -mabi=abi -mabicalls -mno-abicalls -mshared -mno-shared -mplt
-mno-plt -mxgot -mno-xgot -mgp32 -mgp64 -mfp32 -mfpxx -mfp64 -mhard-float -msoft-float -mno-float -msingle-float
-mdouble-float -modd-spreg -mno-odd-spreg -mabs=mode -mnan=encoding -mdsp -mno-dsp -mdspr2 -mno-dspr2 -mmcu -mmno-mcu -meva
-mno-eva -mvirt -mno-virt -mxpa -mno-xpa -mmicromips -mno-micromips -mmsa -mno-msa -mfpu=fpu-type -msmartmips -mno-smartmips
-mpaired-single -mno-paired-single -mdmx -mno-mdmx -mips3d -mno-mips3d -mmt -mno-mt -mllsc -mno-llsc -mlong64 -mlong32
-msym32 -mno-sym32 -Gnum -mlocal-sdata -mno-local-sdata -mextern-sdata -mno-extern-sdata -mgpopt -mno-gopt -membedded-data
-mno-embedded-data -muninit-const-in-rodata -mno-uninit-const-in-rodata -mcode-readable=setting -msplit-addresses
-mno-split-addresses -mexplicit-relocs -mno-explicit-relocs -mcheck-zero-division -mno-check-zero-division -mdivide-traps
-mdivide-breaks -mload-store-pairs -mno-load-store-pairs -mmemcpy -mno-memcpy -mlong-calls -mno-long-calls -mmad -mno-mad -mimadd
-mno-imadd -mfused-madd -mno-fused-madd -nocpp -mfix-24k -mno-fix-24k -mfix-r4000 -mno-fix-r4000 -mfix-r4400 -mno-fix-r4400
-mfix-r10000 -mno-fix-r10000 -mfix-rm7000 -mno-fix-rm7000 -mfix-vr4120 -mno-fix-vr4120 -mfix-vr4130 -mno-fix-vr4130 -mfix-sb1
-mno-fix-sb1 -mflush-func=func -mno-flush-func -mbranch-cost=num -mbranch-likely -mno-branch-likely -mcompact-branches=policy
-mfp-exceptions -mno-fp-exceptions -mvr4130-align -mno-vr4130-align -msynci -mno-synci -mlxc1-sxc1 -mno-lxc1-sxc1 -mmadd4
-mno-madd4 -mrelax-pic-calls -mno-relax-pic-calls -mmcount-ra-address -mframe-header-opt -mno-frame-header-opt

MMIX Options -mlibfuncs -mno-libfuncs -mepsilon -mno-epsilon -mabi=gnu -mabi=mmixware -mzero-extend -mknuthdiv
-mtoplevel-symbols -melf -mbranch-predict -mno-branch-predict -mbase-addresses -mno-base-addresses -msingle-exit -mno-single-exit

MN10300 Options -mmult-bug -mno-mult-bug -mno-am33 -mam33 -mam33-2 -mam34 -mtune=cpu-type -mreturn-pointer-on-d0 -mno-crt0 -mrelax
-mliw -msetlb

Moxie Options -meb -mel -mmul.x -mno-crt0

MSP430 Options -msim -masm-hex -mmcu= -mcpu= -mlarge -msmall -mrelax -mwarn-mcu -mcode-region= -mdata-region= -msilicon-errata=
-msilicon-errata-warn= -mhwmult= -minrt

NDS32 Options -mbig-endian -mlittle-endian -mreduced-regs -mfull-regs -mcmov -mno-cmov -mperf-ext -mno-perf-ext -mv3push
-mno-v3push -m16bit -mno-16bit -misr-vector-size=num -mcache-block-size=num -march=arch -mcmodel=code-model -mctor-dtor -mrelax

Nios II Options -G num -mgpopt=option -mgpopt -mno-gpopt -mel -meb -mno-bypass-cache -mbypass-cache -mno-cache-volatile
-mcache-volatile -mno-fast-sw-div -mfast-sw-div -mhw-mul -mno-hw-mul -mhw-mulx -mno-hw-mulx -mno-hw-div -mhw-div -mcustom-insn=N
-mno-custom-insn -mcustom-fpu-cfg=name -mhal -msmallc -msys-crt0=name -msys-lib=name -march=arch -mbmx -mno-bmx -mcdx -mno-cdx

Nvidia PTX Options -m32 -m64 -mmainkernel -moptimize

PDP-11 Options -mfpu -msoft-float -mac0 -mno-ac0 -m40 -m45 -m10 -mbcopy -mbcopy-builtin -mint32 -mno-int16 -mint16 -mno-int32
-mfloat32 -mno-float64 -mfloat64 -mno-float32 -mabshi -mno-abshi -mbranch-expensive -mbranch-cheap -munix-asm -mdec-asm

picoChip Options -mae=ae_type -mvliw-lookahead=N -msymbol-as-address -mno-inefficient-warnings

PowerPC Options See RS/6000 and PowerPC Options.

RISC-V Options -mbranch-cost=N-instruction -mplt -mno-plt -mabi=ABI-string -mfdiv -mno-fdiv -mdiv -mno-div -march=ISA-string
-mtune=processor-string -msmall-data-limit=N-bytes -msave-restore -mno-save-restore -mstrict-align -mno-strict-align -mcmodel=medlow
-mcmodel=medany -mexplicit-relocs -mno-explicit-relocs

RL78 Options -msim -mmul=none -mmul=g13 -mmul=g14 -mallregs -mcpu=g10 -mcpu=g13 -mcpu=g14 -mg10 -mg13 -mg14 -m64bit-doubles
-m32bit-doubles -msave-mduc-in-interrupts

RS/6000 and PowerPC Options -mcpu=cpu-type -mtune=cpu-type -mcmodel=code-model -mpowerpc64 -maltivec -mno-altivec -mpowerpc-gpopt
-mno-powerpc-gpopt -mpowerpc-gfxopt -mno-powerpc-gfxopt -mmfcrf -mno-mfcrf -mpopcntb -mno-popcntb -mpopcntd -mno-popcntd -mfprnd
-mno-fprnd -mcmpb -mno-cmpb -mmfpgpr -mno-mfpgpr -mhard-dfp -mno-hard-dfp -mfull-toc -mminimal-toc -mno-fp-in-toc
-mno-sum-in-toc -m64 -m32 -mxl-compat -mno-xl-compat -mpe -malign-power -malign-natural -msoft-float -mhard-float -mmultiple
-mno-multiple -msingle-float -mdouble-float -msimple-fpu -mstring -mno-string -mupdate -mno-update -mavoid-indexed-addresses
-mno-avoid-indexed-addresses -mfused-madd -mno-fused-madd -mbit-align -mno-bit-align -mstrict-align -mno-strict-align
-mrelocatable -mno-relocatable -mrelocatable-lib -mno-relocatable-lib -mtoc -mno-toc -mlittle -mlittle-endian -mbig -mbig-endian
-mdynamic-no-pic -maltivec -mswdiv -msingle-pic-base -mprioritize-restricted-insns=priority -msched-costly-dep=dependence_type
-minsert-sched-nops=scheme -mcall-sysv -mcall-netbsd -maix-struct-return -msvr4-struct-return -mabi=abi-type -msecure-plt -mbss-plt
-mblock-move-inline-limit=num -misel -mno-isel -misel=yes -misel=no -mspe -mno-spe -mspe=yes -mspe=no -mpaired -mgen-cell-microcode
-mwarn-cell-microcode -mvrsave -mno-vrsave -mmulhw -mno-mulhw -mdlmzb -mno-dlmzb -mfloat-gprs=yes -mfloat-gprs=no
-mfloat-gprs=single -mfloat-gprs=double -mprototype -mno-prototype -msim -mmvme -mads -myellowknife -memb -msdata -msdata=opt
-mreadonly-in-sdata -mvxworks -G num -mrecip -mrecip=opt -mno-recip -mrecip-precision -mno-recip-precision -mveclibabi=type
-mfriz -mno-friz -mpointers-to-nested-functions -mno-pointers-to-nested-functions -msave-toc-indirect -mno-save-toc-indirect
-mpower8-fusion -mno-mpower8-fusion -mpower8-vector -mno-power8-vector -mcrypto -mno-crypto -mhtm -mno-htm -mdirect-move
-mno-direct-move -mquad-memory -mno-quad-memory -mquad-memory-atomic -mno-quad-memory-atomic -mcompat-align-parm
-mno-compat-align-parm -mupper-regs-df -mno-upper-regs-df -mupper-regs-sf -mno-upper-regs-sf -mupper-regs-di -mno-upper-regs-di
-mupper-regs -mno-upper-regs -mfloat128 -mno-float128 -mfloat128-hardware -mno-float128-hardware -mgnu-attribute
-mno-gnu-attribute -mstack-protector-guard=guard -mstack-protector-guard-reg=reg -mstack-protector-guard-offset=offset -mlra -mno-lra

RX Options -m64bit-doubles -m32bit-doubles -fpu -nofpu -mcpu= -mbig-endian-data -mlittle-endian-data -msmall-data -msim -mno-sim
-mas100-syntax -mno-as100-syntax -mrelax -mmax-constant-size= -mint-register= -mpid -mallow-string-insns -mno-allow-string-insns
-mjsr -mno-warn-multiple-fast-interrupts -msave-acc-in-interrupts

S/390 and zSeries Options -mtune=cpu-type -march=cpu-type -mhard-float -msoft-float -mhard-dfp -mno-hard-dfp -mlong-double-64
-mlong-double-128 -mbackchain -mno-backchain -mpacked-stack -mno-packed-stack -msmall-exec -mno-small-exec -mmvcle -mno-mvcle
-m64 -m31 -mdebug -mno-debug -mesa -mzarch -mhtm -mvx -mzvector -mtpf-trace -mno-tpf-trace -mfused-madd -mno-fused-madd
-mwarn-framesize -mwarn-dynamicstack -mstack-size -mstack-guard -mhotpatch=halfwords,halfwords

Score Options -meb -mel -mnhwloop -muls -mmac -mscore5 -mscore5u -mscore7 -mscore7d

SH Options -m1 -m2 -m2e -m2a-nofpu -m2a-single-only -m2a-single -m2a -m3 -m3e -m4-nofpu -m4-single-only -m4-single -m4
-m4a-nofpu -m4a-single-only -m4a-single -m4a -m4al -mb -ml -mdalign -mrelax -mbigtable -mfmovd -mrenesas -mno-renesas
-mnomacsave -mieee -mno-ieee -mbitops -misize -minline-ic_invalidate -mpadstruct -mprefergot -musermode -multcost=number
-mdiv=strategy -mdivsi3_libfunc=name -mfixed-range=register-range -maccumulate-outgoing-args -matomic-model=atomic-model
-mbranch-cost=num -mzdcbranch -mno-zdcbranch -mcbranch-force-delay-slot -mfused-madd -mno-fused-madd -mfsca -mno-fsca -mfsrra
-mno-fsrra -mpretend-cmove -mtas

Solaris 2 Options -mclear-hwcap -mno-clear-hwcap -mimpure-text -mno-impure-text -pthreads

SPARC Options -mcpu=cpu-type -mtune=cpu-type -mcmodel=code-model -mmemory-model=mem-model -m32 -m64 -mapp-regs -mno-app-regs
-mfaster-structs -mno-faster-structs -mflat -mno-flat -mfpu -mno-fpu -mhard-float -msoft-float -mhard-quad-float
-msoft-quad-float -mstack-bias -mno-stack-bias -mstd-struct-return -mno-std-struct-return -munaligned-doubles -mno-unaligned-doubles
-muser-mode -mno-user-mode -mv8plus -mno-v8plus -mvis -mno-vis -mvis2 -mno-vis2 -mvis3 -mno-vis3 -mvis4 -mno-vis4 -mvis4b
-mno-vis4b -mcbcond -mno-cbcond -mfmaf -mno-fmaf -mfsmuld -mno-fsmuld -mpopc -mno-popc -msubxc -mno-subxc -mfix-at697f
-mfix-ut699 -mfix-ut700 -mfix-gr712rc -mlra -mno-lra

SPU Options -mwarn-reloc -merror-reloc -msafe-dma -munsafe-dma -mbranch-hints -msmall-mem -mlarge-mem -mstdmain
-mfixed-range=register-range -mea32 -mea64 -maddress-space-conversion -mno-address-space-conversion -mcache-size=cache-size
-matomic-updates -mno-atomic-updates

System V Options -Qy -Qn -YP,paths -Ym,dir

TILE-Gx Options -mcpu=CPU -m32 -m64 -mbig-endian -mlittle-endian -mcmodel=code-model

TILEPro Options -mcpu=cpu -m32

V850 Options -mlong-calls -mno-long-calls -mep -mno-ep -mprolog-function -mno-prolog-function -mspace -mtda=n -msda=n -mzda=n
-mapp-regs -mno-app-regs -mdisable-callt -mno-disable-callt -mv850e2v3 -mv850e2 -mv850e1 -mv850es -mv850e -mv850 -mv850e3v5
-mloop -mrelax -mlong-jumps -msoft-float -mhard-float -mgcc-abi -mrh850-abi -mbig-switch

VAX Options -mg -mgnu -munix

Visium Options -mdebug -msim -mfpu -mno-fpu -mhard-float -msoft-float -mcpu=cpu-type -mtune=cpu-type -msv-mode -muser-mode

VMS Options -mvms-return-codes -mdebug-main=prefix -mmalloc64 -mpointer-size=size

VxWorks Options -mrtp -non-static -Bstatic -Bdynamic -Xbind-lazy -Xbind-now

x86 Options -mtune=cpu-type -march=cpu-type -mtune-ctrl=feature-list -mdump-tune-features -mno-default -mfpmath=unit -masm=dialect
-mno-fancy-math-387 -mno-fp-ret-in-387 -m80387 -mhard-float -msoft-float -mno-wide-multiply -mrtd -malign-double
-mpreferred-stack-boundary=num -mincoming-stack-boundary=num -mcld -mcx16 -msahf -mmovbe -mcrc32 -mrecip -mrecip=opt -mvzeroupper
-mprefer-avx128 -mmmx -msse -msse2 -msse3 -mssse3 -msse4.1 -msse4.2 -msse4 -mavx -mavx2 -mavx512f -mavx512pf -mavx512er
-mavx512cd -mavx512vl -mavx512bw -mavx512dq -mavx512ifma -mavx512vbmi -msha -maes -mpclmul -mfsgsbase -mrdrnd -mf16c -mfma
-mprefetchwt1 -mclflushopt -mxsavec -mxsaves -msse4a -m3dnow -m3dnowa -mpopcnt -mabm -mbmi -mtbm -mfma4 -mxop -mlzcnt
-mbmi2 -mfxsr -mxsave -mxsaveopt -mrtm -mlwp -mmpx -mmwaitx -mclzero -mpku -mthreads -mms-bitfields -mno-align-stringops
-minline-all-stringops -minline-stringops-dynamically -mstringop-strategy=alg -mmemcpy-strategy=strategy -mmemset-strategy=strategy
-mpush-args -maccumulate-outgoing-args -m128bit-long-double -m96bit-long-double -mlong-double-64 -mlong-double-80
-mlong-double-128 -mregparm=num -msseregparm -mveclibabi=type -mvect8-ret-in-mem -mpc32 -mpc64 -mpc80 -mstackrealign
-momit-leaf-frame-pointer -mno-red-zone -mno-tls-direct-seg-refs -mcmodel=code-model -mabi=name -maddress-mode=mode -m32 -m64
-mx32 -m16 -miamcu -mlarge-data-threshold=num -msse2avx -mfentry -mrecord-mcount -mnop-mcount -m8bit-idiv
-mavx256-split-unaligned-load -mavx256-split-unaligned-store -malign-data=type -mstack-protector-guard=guard -mmitigate-rop
-mgeneral-regs-only -mindirect-branch=choice -mfunction-return=choice -mindirect-branch-register

x86 Windows Options -mconsole -mcygwin -mno-cygwin -mdll -mnop-fun-dllimport -mthread -municode -mwin32 -mwindows
-fno-set-stack-executable

Xstormy16 Options -msim

Xtensa Options -mconst16 -mno-const16 -mfused-madd -mno-fused-madd -mforce-no-pic -mserialize-volatile -mno-serialize-volatile
-mtext-section-literals -mno-text-section-literals -mauto-litpools -mno-auto-litpools -mtarget-align -mno-target-align -mlongcalls
-mno-longcalls

zSeries Options See S/390 and zSeries Options.

Options Controlling the Kind of Output
Compilation can involve up to four stages: preprocessing, compilation proper, assembly and linking, always in that order. GCC is capable
of preprocessing and compiling several files either into several assembler input files, or into one assembler input file; then each
assembler input file produces an object file, and linking combines all the object files (those newly compiled, and those specified as
input) into an executable file.

For any given input file, the file name suffix determines what kind of compilation is done:

file.c
C source code that must be preprocessed.

file.i
C source code that should not be preprocessed.

file.ii
C++ source code that should not be preprocessed.

file.m
Objective-C source code. Note that you must link with the libobjc library to make an Objective-C program work.

file.mi
Objective-C source code that should not be preprocessed.

file.mm
file.M
Objective-C++ source code. Note that you must link with the libobjc library to make an Objective-C++ program work. Note that .M
refers to a literal capital M.

file.mii
Objective-C++ source code that should not be preprocessed.

file.h
C, C++, Objective-C or Objective-C++ header file to be turned into a precompiled header (default), or C, C++ header file to be turned
into an Ada spec (via the -fdump-ada-spec switch).

file.cc
file.cp
file.cxx
file.cpp
file.CPP
file.c++
file.C
C++ source code that must be preprocessed. Note that in .cxx, the last two letters must both be literally x. Likewise, .C refers to a
literal capital C.

file.mm
file.M
Objective-C++ source code that must be preprocessed.

file.mii
Objective-C++ source code that should not be preprocessed.

file.hh
file.H
file.hp
file.hxx
file.hpp
file.HPP
file.h++
file.tcc
C++ header file to be turned into a precompiled header or Ada spec.

file.f
file.for
file.ftn
Fixed form Fortran source code that should not be preprocessed.

file.F
file.FOR
file.fpp
file.FPP
file.FTN
Fixed form Fortran source code that must be preprocessed (with the traditional preprocessor).

file.f90
file.f95
file.f03
file.f08
Free form Fortran source code that should not be preprocessed.

file.F90
file.F95
file.F03
file.F08
Free form Fortran source code that must be preprocessed (with the traditional preprocessor).

file.go
Go source code.

file.brig
BRIG files (binary representation of HSAIL).

file.ads
Ada source code file that contains a library unit declaration (a declaration of a package, subprogram, or generic, or a generic
instantiation), or a library unit renaming declaration (a package, generic, or subprogram renaming declaration). Such files are also
called specs.

file.adb
Ada source code file containing a library unit body (a subprogram or package body). Such files are also called bodies.

file.d
D source code file.

file.di
D interface code file.

file.dd
D documentation code file.

file.s
Assembler code.

file.S
file.sx
Assembler code that must be preprocessed.

other
An object file to be fed straight into linking. Any file name with no recognized suffix is treated this way.

You can specify the input language explicitly with the -x option:

-x language
Specify explicitly the language for the following input files (rather than letting the compiler choose a default based on the file name
suffix). This option applies to all following input files until the next -x option. Possible values for language are:

c c-header cpp-output
c++ c++-header c++-cpp-output
objective-c objective-c-header objective-c-cpp-output
objective-c++ objective-c++-header objective-c++-cpp-output
assembler assembler-with-cpp
ada
d
f77 f77-cpp-input f95 f95-cpp-input
go
brig

-x none
Turn off any specification of a language, so that subsequent files are handled according to their file name suffixes (as they are if -x
has not been used at all).

If you only want some of the stages of compilation, you can use -x (or filename suffixes) to tell gcc where to start, and one of the
options -c, -S, or -E to say where gcc is to stop. Note that some combinations (for example, -x cpp-output -E) instruct gcc to do nothing
at all.

-c Compile or assemble the source files, but do not link. The linking stage simply is not done. The ultimate output is in the form of an
object file for each source file.

By default, the object file name for a source file is made by replacing the suffix .c, .i, .s, etc., with .o.

Unrecognized input files, not requiring compilation or assembly, are ignored.

-S Stop after the stage of compilation proper; do not assemble. The output is in the form of an assembler code file for each non-
assembler input file specified.

By default, the assembler file name for a source file is made by replacing the suffix .c, .i, etc., with .s.

Input files that don't require compilation are ignored.

-E Stop after the preprocessing stage; do not run the compiler proper. The output is in the form of preprocessed source code, which is
sent to the standard output.

Input files that don't require preprocessing are ignored.

-o file
Place output in file file. This applies to whatever sort of output is being produced, whether it be an executable file, an object
file, an assembler file or preprocessed C code.

If -o is not specified, the default is to put an executable file in a.out, the object file for source.suffix in source.o, its assembler
file in source.s, a precompiled header file in source.suffix.gch, and all preprocessed C source on standard output.

-v Print (on standard error output) the commands executed to run the stages of compilation. Also print the version number of the compiler
driver program and of the preprocessor and the compiler proper.

-###
Like -v except the commands are not executed and arguments are quoted unless they contain only alphanumeric characters or "./-_". This
is useful for shell scripts to capture the driver-generated command lines.

--help
Print (on the standard output) a description of the command-line options understood by gcc. If the -v option is also specified then
--help is also passed on to the various processes invoked by gcc, so that they can display the command-line options they accept. If
the -Wextra option has also been specified (prior to the --help option), then command-line options that have no documentation
associated with them are also displayed.

--target-help
Print (on the standard output) a description of target-specific command-line options for each tool. For some targets extra target-
specific information may also be printed.

--help={class|[^]qualifier}[,...]
Print (on the standard output) a description of the command-line options understood by the compiler that fit into all specified classes
and qualifiers. These are the supported classes:

optimizers
Display all of the optimization options supported by the compiler.

warnings
Display all of the options controlling warning messages produced by the compiler.

target
Display target-specific options. Unlike the --target-help option however, target-specific options of the linker and assembler are
not displayed. This is because those tools do not currently support the extended --help= syntax.

params
Display the values recognized by the --param option.

language
Display the options supported for language, where language is the name of one of the languages supported in this version of GCC.

common
Display the options that are common to all languages.

These are the supported qualifiers:

undocumented
Display only those options that are undocumented.

joined
Display options taking an argument that appears after an equal sign in the same continuous piece of text, such as: --help=target.

separate
Display options taking an argument that appears as a separate word following the original option, such as: -o output-file.

Thus for example to display all the undocumented target-specific switches supported by the compiler, use:

--help=target,undocumented

The sense of a qualifier can be inverted by prefixing it with the ^ character, so for example to display all binary warning options
(i.e., ones that are either on or off and that do not take an argument) that have a description, use:

--help=warnings,^joined,^undocumented

The argument to --help= should not consist solely of inverted qualifiers.

Combining several classes is possible, although this usually restricts the output so much that there is nothing to display. One case
where it does work, however, is when one of the classes is target. For example, to display all the target-specific optimization
options, use:

--help=target,optimizers

The --help= option can be repeated on the command line. Each successive use displays its requested class of options, skipping those
that have already been displayed.

If the -Q option appears on the command line before the --help= option, then the descriptive text displayed by --help= is changed.
Instead of describing the displayed options, an indication is given as to whether the option is enabled, disabled or set to a specific
value (assuming that the compiler knows this at the point where the --help= option is used).

Here is a truncated example from the ARM port of gcc:

% gcc -Q -mabi=2 --help=target -c
The following options are target specific:
-mabi= 2
-mabort-on-noreturn [disabled]
-mapcs [disabled]

The output is sensitive to the effects of previous command-line options, so for example it is possible to find out which optimizations
are enabled at -O2 by using:

-Q -O2 --help=optimizers

Alternatively you can discover which binary optimizations are enabled by -O3 by using:

gcc -c -Q -O3 --help=optimizers > /tmp/O3-opts
gcc -c -Q -O2 --help=optimizers > /tmp/O2-opts
diff /tmp/O2-opts /tmp/O3-opts | grep enabled

--version
Display the version number and copyrights of the invoked GCC.

-pass-exit-codes
Normally the gcc program exits with the code of 1 if any phase of the compiler returns a non-success return code. If you specify
-pass-exit-codes, the gcc program instead returns with the numerically highest error produced by any phase returning an error
indication. The C, C++, and Fortran front ends return 4 if an internal compiler error is encountered.

-pipe
Use pipes rather than temporary files for communication between the various stages of compilation. This fails to work on some systems
where the assembler is unable to read from a pipe; but the GNU assembler has no trouble.

-specs=file
Process file after the compiler reads in the standard specs file, in order to override the defaults which the gcc driver program uses
when determining what switches to pass to cc1, cc1plus, as, ld, etc. More than one -specs=file can be specified on the command line,
and they are processed in order, from left to right.

-wrapper
Invoke all subcommands under a wrapper program. The name of the wrapper program and its parameters are passed as a comma separated
list.

gcc -c t.c -wrapper gdb,--args

This invokes all subprograms of gcc under gdb --args, thus the invocation of cc1 is gdb --args cc1 ....

-fplugin=name.so
Load the plugin code in file name.so, assumed to be a shared object to be dlopen'd by the compiler. The base name of the shared object
file is used to identify the plugin for the purposes of argument parsing (See -fplugin-arg-name-key=value below). Each plugin should
define the callback functions specified in the Plugins API.

-fplugin-arg-name-key=value
Define an argument called key with a value of value for the plugin called name.

-fdump-ada-spec[-slim]
For C and C++ source and include files, generate corresponding Ada specs.

-fada-spec-parent=unit
In conjunction with -fdump-ada-spec[-slim] above, generate Ada specs as child units of parent unit.

-fdump-go-spec=file
For input files in any language, generate corresponding Go declarations in file. This generates Go "const", "type", "var", and "func"
declarations which may be a useful way to start writing a Go interface to code written in some other language.

@file
Read command-line options from file. The options read are inserted in place of the original @file option. If file does not exist, or
cannot be read, then the option will be treated literally, and not removed.

Options in file are separated by whitespace. A whitespace character may be included in an option by surrounding the entire option in
either single or double quotes. Any character (including a backslash) may be included by prefixing the character to be included with a
backslash. The file may itself contain additional @file options; any such options will be processed recursively.

Compiling C++ Programs
C++ source files conventionally use one of the suffixes .C, .cc, .cpp, .CPP, .c++, .cp, or .cxx; C++ header files often use .hh, .hpp, .H,
or (for shared template code) .tcc; and preprocessed C++ files use the suffix .ii. GCC recognizes files with these names and compiles them
as C++ programs even if you call the compiler the same way as for compiling C programs (usually with the name gcc).

However, the use of gcc does not add the C++ library. g++ is a program that calls GCC and automatically specifies linking against the C++
library. It treats .c, .h and .i files as C++ source files instead of C source files unless -x is used. This program is also useful when
precompiling a C header file with a .h extension for use in C++ compilations. On many systems, g++ is also installed with the name c++.

When you compile C++ programs, you may specify many of the same command-line options that you use for compiling programs in any language;
or command-line options meaningful for C and related languages; or options that are meaningful only for C++ programs.

Options Controlling C Dialect
The following options control the dialect of C (or languages derived from C, such as C++, Objective-C and Objective-C++) that the compiler
accepts:

-ansi
In C mode, this is equivalent to -std=c90. In C++ mode, it is equivalent to -std=c++98.

This turns off certain features of GCC that are incompatible with ISO C90 (when compiling C code), or of standard C++ (when compiling
C++ code), such as the "asm" and "typeof" keywords, and predefined macros such as "unix" and "vax" that identify the type of system you
are using. It also enables the undesirable and rarely used ISO trigraph feature. For the C compiler, it disables recognition of C++
style // comments as well as the "inline" keyword.

The alternate keywords "__asm__", "__extension__", "__inline__" and "__typeof__" continue to work despite -ansi. You would not want to
use them in an ISO C program, of course, but it is useful to put them in header files that might be included in compilations done with
-ansi. Alternate predefined macros such as "__unix__" and "__vax__" are also available, with or without -ansi.

The -ansi option does not cause non-ISO programs to be rejected gratuitously. For that, -Wpedantic is required in addition to -ansi.

The macro "__STRICT_ANSI__" is predefined when the -ansi option is used. Some header files may notice this macro and refrain from
declaring certain functions or defining certain macros that the ISO standard doesn't call for; this is to avoid interfering with any
programs that might use these names for other things.

Functions that are normally built in but do not have semantics defined by ISO C (such as "alloca" and "ffs") are not built-in functions
when -ansi is used.

-std=
Determine the language standard. This option is currently only supported when compiling C or C++.

The compiler can accept several base standards, such as c90 or c++98, and GNU dialects of those standards, such as gnu90 or gnu++98.
When a base standard is specified, the compiler accepts all programs following that standard plus those using GNU extensions that do
not contradict it. For example, -std=c90 turns off certain features of GCC that are incompatible with ISO C90, such as the "asm" and
"typeof" keywords, but not other GNU extensions that do not have a meaning in ISO C90, such as omitting the middle term of a "?:"
expression. On the other hand, when a GNU dialect of a standard is specified, all features supported by the compiler are enabled, even
when those features change the meaning of the base standard. As a result, some strict-conforming programs may be rejected. The
particular standard is used by -Wpedantic to identify which features are GNU extensions given that version of the standard. For example
-std=gnu90 -Wpedantic warns about C++ style // comments, while -std=gnu99 -Wpedantic does not.

A value for this option must be provided; possible values are

c90
c89
iso9899:1990
Support all ISO C90 programs (certain GNU extensions that conflict with ISO C90 are disabled). Same as -ansi for C code.

iso9899:199409
ISO C90 as modified in amendment 1.

c99
c9x
iso9899:1999
iso9899:199x
ISO C99. This standard is substantially completely supported, modulo bugs and floating-point issues (mainly but not entirely
relating to optional C99 features from Annexes F and G). See <http://gcc.gnu.org/c99status.html> for more information. The names
c9x and iso9899:199x are deprecated.

c11
c1x
iso9899:2011
ISO C11, the 2011 revision of the ISO C standard. This standard is substantially completely supported, modulo bugs, floating-point
issues (mainly but not entirely relating to optional C11 features from Annexes F and G) and the optional Annexes K (Bounds-checking
interfaces) and L (Analyzability). The name c1x is deprecated.

gnu90
gnu89
GNU dialect of ISO C90 (including some C99 features).

gnu99
gnu9x
GNU dialect of ISO C99. The name gnu9x is deprecated.

gnu11
gnu1x
GNU dialect of ISO C11. This is the default for C code. The name gnu1x is deprecated.

c++98
c++03
The 1998 ISO C++ standard plus the 2003 technical corrigendum and some additional defect reports. Same as -ansi for C++ code.

gnu++98
gnu++03
GNU dialect of -std=c++98.

c++11
c++0x
The 2011 ISO C++ standard plus amendments. The name c++0x is deprecated.

gnu++11
gnu++0x
GNU dialect of -std=c++11. The name gnu++0x is deprecated.

c++14
c++1y
The 2014 ISO C++ standard plus amendments. The name c++1y is deprecated.

gnu++14
gnu++1y
GNU dialect of -std=c++14. This is the default for C++ code. The name gnu++1y is deprecated.

c++1z
The next revision of the ISO C++ standard, tentatively planned for 2017. Support is highly experimental, and will almost certainly
change in incompatible ways in future releases.

gnu++1z
GNU dialect of -std=c++1z. Support is highly experimental, and will almost certainly change in incompatible ways in future
releases.

-fgnu89-inline
The option -fgnu89-inline tells GCC to use the traditional GNU semantics for "inline" functions when in C99 mode.

Using this option is roughly equivalent to adding the "gnu_inline" function attribute to all inline functions.

The option -fno-gnu89-inline explicitly tells GCC to use the C99 semantics for "inline" when in C99 or gnu99 mode (i.e., it specifies
the default behavior). This option is not supported in -std=c90 or -std=gnu90 mode.

The preprocessor macros "__GNUC_GNU_INLINE__" and "__GNUC_STDC_INLINE__" may be used to check which semantics are in effect for
"inline" functions.

-fpermitted-flt-eval-methods=style
ISO/IEC TS 18661-3 defines new permissible values for "FLT_EVAL_METHOD" that indicate that operations and constants with a semantic
type that is an interchange or extended format should be evaluated to the precision and range of that type. These new values are a
superset of those permitted under C99/C11, which does not specify the meaning of other positive values of "FLT_EVAL_METHOD". As such,
code conforming to C11 may not have been written expecting the possibility of the new values.

-fpermitted-flt-eval-methods specifies whether the compiler should allow only the values of "FLT_EVAL_METHOD" specified in C99/C11, or
the extended set of values specified in ISO/IEC TS 18661-3.

style is either "c11" or "ts-18661-3" as appropriate.

The default when in a standards compliant mode (-std=c11 or similar) is -fpermitted-flt-eval-methods=c11. The default when in a GNU
dialect (-std=gnu11 or similar) is -fpermitted-flt-eval-methods=ts-18661-3.

-aux-info filename
Output to the given filename prototyped declarations for all functions declared and/or defined in a translation unit, including those
in header files. This option is silently ignored in any language other than C.

Besides declarations, the file indicates, in comments, the origin of each declaration (source file and line), whether the declaration
was implicit, prototyped or unprototyped (I, N for new or O for old, respectively, in the first character after the line number and the
colon), and whether it came from a declaration or a definition (C or F, respectively, in the following character). In the case of
function definitions, a K&R-style list of arguments followed by their declarations is also provided, inside comments, after the
declaration.

-fallow-parameterless-variadic-functions
Accept variadic functions without named parameters.

Although it is possible to define such a function, this is not very useful as it is not possible to read the arguments. This is only
supported for C as this construct is allowed by C++.

-fno-asm
Do not recognize "asm", "inline" or "typeof" as a keyword, so that code can use these words as identifiers. You can use the keywords
"__asm__", "__inline__" and "__typeof__" instead. -ansi implies -fno-asm.

In C++, this switch only affects the "typeof" keyword, since "asm" and "inline" are standard keywords. You may want to use the
-fno-gnu-keywords flag instead, which has the same effect. In C99 mode (-std=c99 or -std=gnu99), this switch only affects the "asm"
and "typeof" keywords, since "inline" is a standard keyword in ISO C99.

-fno-builtin
-fno-builtin-function
Don't recognize built-in functions that do not begin with __builtin_ as prefix.

GCC normally generates special code to handle certain built-in functions more efficiently; for instance, calls to "alloca" may become
single instructions which adjust the stack directly, and calls to "memcpy" may become inline copy loops. The resulting code is often
both smaller and faster, but since the function calls no longer appear as such, you cannot set a breakpoint on those calls, nor can you
change the behavior of the functions by linking with a different library. In addition, when a function is recognized as a built-in
function, GCC may use information about that function to warn about problems with calls to that function, or to generate more efficient
code, even if the resulting code still contains calls to that function. For example, warnings are given with -Wformat for bad calls to
"printf" when "printf" is built in and "strlen" is known not to modify global memory.

With the -fno-builtin-function option only the built-in function function is disabled. function must not begin with __builtin_. If a
function is named that is not built-in in this version of GCC, this option is ignored. There is no corresponding -fbuiltin-function
option; if you wish to enable built-in functions selectively when using -fno-builtin or -ffreestanding, you may define macros such as:

#define abs(n) __builtin_abs ((n))
#define strcpy(d, s) __builtin_strcpy ((d), (s))

-fgimple
Enable parsing of function definitions marked with "__GIMPLE". This is an experimental feature that allows unit testing of GIMPLE
passes.

-fhosted
Assert that compilation targets a hosted environment. This implies -fbuiltin. A hosted environment is one in which the entire
standard library is available, and in which "main" has a return type of "int". Examples are nearly everything except a kernel. This
is equivalent to -fno-freestanding.

-ffreestanding
Assert that compilation targets a freestanding environment. This implies -fno-builtin. A freestanding environment is one in which the
standard library may not exist, and program startup may not necessarily be at "main". The most obvious example is an OS kernel. This
is equivalent to -fno-hosted.

-fopenacc
Enable handling of OpenACC directives "#pragma acc" in C/C++ and "!$acc" in Fortran. When -fopenacc is specified, the compiler
generates accelerated code according to the OpenACC Application Programming Interface v2.0 <http://www.openacc.org/>. This option
implies -pthread, and thus is only supported on targets that have support for -pthread.

-fopenacc-dim=geom
Specify default compute dimensions for parallel offload regions that do not explicitly specify. The geom value is a triple of
':'-separated sizes, in order 'gang', 'worker' and, 'vector'. A size can be omitted, to use a target-specific default value.

-fopenmp
Enable handling of OpenMP directives "#pragma omp" in C/C++ and "!$omp" in Fortran. When -fopenmp is specified, the compiler generates
parallel code according to the OpenMP Application Program Interface v4.5 <http://www.openmp.org/>. This option implies -pthread, and
thus is only supported on targets that have support for -pthread. -fopenmp implies -fopenmp-simd.

-fopenmp-simd
Enable handling of OpenMP's SIMD directives with "#pragma omp" in C/C++ and "!$omp" in Fortran. Other OpenMP directives are ignored.

-fcilkplus
Enable the usage of Cilk Plus language extension features for C/C++. When the option -fcilkplus is specified, enable the usage of the
Cilk Plus Language extension features for C/C++. The present implementation follows ABI version 1.2. This is an experimental feature
that is only partially complete, and whose interface may change in future versions of GCC as the official specification changes.
Currently, all features but "_Cilk_for" have been implemented.

-fgnu-tm
When the option -fgnu-tm is specified, the compiler generates code for the Linux variant of Intel's current Transactional Memory ABI
specification document (Revision 1.1, May 6 2009). This is an experimental feature whose interface may change in future versions of
GCC, as the official specification changes. Please note that not all architectures are supported for this feature.

For more information on GCC's support for transactional memory,

Note that the transactional memory feature is not supported with non-call exceptions (-fnon-call-exceptions).

-fms-extensions
Accept some non-standard constructs used in Microsoft header files.

In C++ code, this allows member names in structures to be similar to previous types declarations.

typedef int UOW;
struct ABC {
UOW UOW;
};

Some cases of unnamed fields in structures and unions are only accepted with this option.

Note that this option is off for all targets but x86 targets using ms-abi.

-fplan9-extensions
Accept some non-standard constructs used in Plan 9 code.

This enables -fms-extensions, permits passing pointers to structures with anonymous fields to functions that expect pointers to
elements of the type of the field, and permits referring to anonymous fields declared using a typedef. This is only supported for C,
not C++.

-fcond-mismatch
Allow conditional expressions with mismatched types in the second and third arguments. The value of such an expression is void. This
option is not supported for C++.

-flax-vector-conversions
Allow implicit conversions between vectors with differing numbers of elements and/or incompatible element types. This option should
not be used for new code.

-funsigned-char
Let the type "char" be unsigned, like "unsigned char".

Each kind of machine has a default for what "char" should be. It is either like "unsigned char" by default or like "signed char" by
default.

Ideally, a portable program should always use "signed char" or "unsigned char" when it depends on the signedness of an object. But
many programs have been written to use plain "char" and expect it to be signed, or expect it to be unsigned, depending on the machines
they were written for. This option, and its inverse, let you make such a program work with the opposite default.

The type "char" is always a distinct type from each of "signed char" or "unsigned char", even though its behavior is always just like
one of those two.

-fsigned-char
Let the type "char" be signed, like "signed char".

Note that this is equivalent to -fno-unsigned-char, which is the negative form of -funsigned-char. Likewise, the option
-fno-signed-char is equivalent to -funsigned-char.

-fsigned-bitfields
-funsigned-bitfields
-fno-signed-bitfields
-fno-unsigned-bitfields
These options control whether a bit-field is signed or unsigned, when the declaration does not use either "signed" or "unsigned". By
default, such a bit-field is signed, because this is consistent: the basic integer types such as "int" are signed types.

-fsso-struct=endianness
Set the default scalar storage order of structures and unions to the specified endianness. The accepted values are big-endian, little-
endian and native for the native endianness of the target (the default). This option is not supported for C++.

Warning: the -fsso-struct switch causes GCC to generate code that is not binary compatible with code generated without it if the
specified endianness is not the native endianness of the target.

Options Controlling C++ Dialect
This section describes the command-line options that are only meaningful for C++ programs. You can also use most of the GNU compiler
options regardless of what language your program is in. For example, you might compile a file firstClass.C like this:

g++ -g -fstrict-enums -O -c firstClass.C

In this example, only -fstrict-enums is an option meant only for C++ programs; you can use the other options with any language supported by
GCC.

Some options for compiling C programs, such as -std, are also relevant for C++ programs.

Here is a list of options that are only for compiling C++ programs:

-fabi-version=n
Use version n of the C++ ABI. The default is version 0.

Version 0 refers to the version conforming most closely to the C++ ABI specification. Therefore, the ABI obtained using version 0 will
change in different versions of G++ as ABI bugs are fixed.

Version 1 is the version of the C++ ABI that first appeared in G++ 3.2.

Version 2 is the version of the C++ ABI that first appeared in G++ 3.4, and was the default through G++ 4.9.

Version 3 corrects an error in mangling a constant address as a template argument.

Version 4, which first appeared in G++ 4.5, implements a standard mangling for vector types.

Version 5, which first appeared in G++ 4.6, corrects the mangling of attribute const/volatile on function pointer types, decltype of a
plain decl, and use of a function parameter in the declaration of another parameter.

Version 6, which first appeared in G++ 4.7, corrects the promotion behavior of C++11 scoped enums and the mangling of template argument
packs, const/static_cast, prefix ++ and --, and a class scope function used as a template argument.

Version 7, which first appeared in G++ 4.8, that treats nullptr_t as a builtin type and corrects the mangling of lambdas in default
argument scope.

Version 8, which first appeared in G++ 4.9, corrects the substitution behavior of function types with function-cv-qualifiers.

Version 9, which first appeared in G++ 5.2, corrects the alignment of "nullptr_t".

Version 10, which first appeared in G++ 6.1, adds mangling of attributes that affect type identity, such as ia32 calling convention
attributes (e.g. stdcall).

Version 11, which first appeared in G++ 7, corrects the mangling of sizeof... expressions and operator names. For multiple entities
with the same name within a function, that are declared in different scopes, the mangling now changes starting with the twelfth
occurrence. It also implies -fnew-inheriting-ctors.

See also -Walloca-larger-than=n.

-Wvolatile-register-var
Warn if a register variable is declared volatile. The volatile modifier does not inhibit all optimizations that may eliminate reads
and/or writes to register variables. This warning is enabled by -Wall.

-Wdisabled-optimization
Warn if a requested optimization pass is disabled. This warning does not generally indicate that there is anything wrong with your
code; it merely indicates that GCC's optimizers are unable to handle the code effectively. Often, the problem is that your code is too
big or too complex; GCC refuses to optimize programs when the optimization itself is likely to take inordinate amounts of time.

-Wpointer-sign (C and Objective-C only)
Warn for pointer argument passing or assignment with different signedness. This option is only supported for C and Objective-C. It is
implied by -Wall and by -Wpedantic, which can be disabled with -Wno-pointer-sign.

-Wstack-protector
This option is only active when -fstack-protector is active. It warns about functions that are not protected against stack smashing.

-Woverlength-strings
Warn about string constants that are longer than the "minimum maximum" length specified in the C standard. Modern compilers generally
allow string constants that are much longer than the standard's minimum limit, but very portable programs should avoid using longer
strings.

The limit applies after string constant concatenation, and does not count the trailing NUL. In C90, the limit was 509 characters; in
C99, it was raised to 4095. C++98 does not specify a normative minimum maximum, so we do not diagnose overlength strings in C++.

This option is implied by -Wpedantic, and can be disabled with -Wno-overlength-strings.

-Wunsuffixed-float-constants (C and Objective-C only)
Issue a warning for any floating constant that does not have a suffix. When used together with -Wsystem-headers it warns about such
constants in system header files. This can be useful when preparing code to use with the "FLOAT_CONST_DECIMAL64" pragma from the
decimal floating-point extension to C99.

-Wno-designated-init (C and Objective-C only)
Suppress warnings when a positional initializer is used to initialize a structure that has been marked with the "designated_init"
attribute.

-Whsa
Issue a warning when HSAIL cannot be emitted for the compiled function or OpenMP construct.

Options for Debugging Your Program
To tell GCC to emit extra information for use by a debugger, in almost all cases you need only to add -g to your other options.

GCC allows you to use -g with -O. The shortcuts taken by optimized code may occasionally be surprising: some variables you declared may
not exist at all; flow of control may briefly move where you did not expect it; some statements may not be executed because they compute
constant results or their values are already at hand; some statements may execute in different places because they have been moved out of
loops. Nevertheless it is possible to debug optimized output. This makes it reasonable to use the optimizer for programs that might have
bugs.

If you are not using some other optimization option, consider using -Og with -g. With no -O option at all, some compiler passes that
collect information useful for debugging do not run at all, so that -Og may result in a better debugging experience.

-g Produce debugging information in the operating system's native format (stabs, COFF, XCOFF, or DWARF). GDB can work with this debugging
information.

On most systems that use stabs format, -g enables use of extra debugging information that only GDB can use; this extra information
makes debugging work better in GDB but probably makes other debuggers crash or refuse to read the program. If you want to control for
certain whether to generate the extra information, use -gstabs+, -gstabs, -gxcoff+, -gxcoff, or -gvms (see below).

-ggdb
Produce debugging information for use by GDB. This means to use the most expressive format available (DWARF, stabs, or the native
format if neither of those are supported), including GDB extensions if at all possible.

-gdwarf
-gdwarf-version
Produce debugging information in DWARF format (if that is supported). The value of version may be either 2, 3, 4 or 5; the default
version for most targets is 4. DWARF Version 5 is only experimental.

Note that with DWARF Version 2, some ports require and always use some non-conflicting DWARF 3 extensions in the unwind tables.

Version 4 may require GDB 7.0 and -fvar-tracking-assignments for maximum benefit.

GCC no longer supports DWARF Version 1, which is substantially different than Version 2 and later. For historical reasons, some other
DWARF-related options (including -feliminate-dwarf2-dups and -fno-dwarf2-cfi-asm) retain a reference to DWARF Version 2 in their names,
but apply to all currently-supported versions of DWARF.

-gstabs
Produce debugging information in stabs format (if that is supported), without GDB extensions. This is the format used by DBX on most
BSD systems. On MIPS, Alpha and System V Release 4 systems this option produces stabs debugging output that is not understood by DBX
or SDB. On System V Release 4 systems this option requires the GNU assembler.

-gstabs+
Produce debugging information in stabs format (if that is supported), using GNU extensions understood only by the GNU debugger (GDB).
The use of these extensions is likely to make other debuggers crash or refuse to read the program.

-gcoff
Produce debugging information in COFF format (if that is supported). This is the format used by SDB on most System V systems prior to
System V Release 4.

-gxcoff
Produce debugging information in XCOFF format (if that is supported). This is the format used by the DBX debugger on IBM RS/6000
systems.

-gxcoff+
Produce debugging information in XCOFF format (if that is supported), using GNU extensions understood only by the GNU debugger (GDB).
The use of these extensions is likely to make other debuggers crash or refuse to read the program, and may cause assemblers other than
the GNU assembler (GAS) to fail with an error.

-gvms
Produce debugging information in Alpha/VMS debug format (if that is supported). This is the format used by DEBUG on Alpha/VMS systems.

-glevel
-ggdblevel
-gstabslevel
-gcofflevel
-gxcofflevel
-gvmslevel
Request debugging information and also use level to specify how much information. The default level is 2.

Level 0 produces no debug information at all. Thus, -g0 negates -g.

Level 1 produces minimal information, enough for making backtraces in parts of the program that you don't plan to debug. This includes
descriptions of functions and external variables, and line number tables, but no information about local variables.

Level 3 includes extra information, such as all the macro definitions present in the program. Some debuggers support macro expansion
when you use -g3.

-gdwarf does not accept a concatenated debug level, to avoid confusion with -gdwarf-level. Instead use an additional -glevel option to
change the debug level for DWARF.

-feliminate-unused-debug-symbols
Produce debugging information in stabs format (if that is supported), for only symbols that are actually used.

-femit-class-debug-always
Instead of emitting debugging information for a C++ class in only one object file, emit it in all object files using the class. This
option should be used only with debuggers that are unable to handle the way GCC normally emits debugging information for classes
because using this option increases the size of debugging information by as much as a factor of two.

-fno-merge-debug-strings
Direct the linker to not merge together strings in the debugging information that are identical in different object files. Merging is
not supported by all assemblers or linkers. Merging decreases the size of the debug information in the output file at the cost of
increasing link processing time. Merging is enabled by default.

-fdebug-prefix-map=old=new
When compiling files in directory old, record debugging information describing them as in new instead.

-fvar-tracking
Run variable tracking pass. It computes where variables are stored at each position in code. Better debugging information is then
generated (if the debugging information format supports this information).

It is enabled by default when compiling with optimization (-Os, -O, -O2, ...), debugging information (-g) and the debug info format
supports it.

-fvar-tracking-assignments
Annotate assignments to user variables early in the compilation and attempt to carry the annotations over throughout the compilation
all the way to the end, in an attempt to improve debug information while optimizing. Use of -gdwarf-4 is recommended along with it.

It can be enabled even if var-tracking is disabled, in which case annotations are created and maintained, but discarded at the end. By
default, this flag is enabled together with -fvar-tracking, except when selective scheduling is enabled.

-gsplit-dwarf
Separate as much DWARF debugging information as possible into a separate output file with the extension .dwo. This option allows the
build system to avoid linking files with debug information. To be useful, this option requires a debugger capable of reading .dwo
files.

-gpubnames
Generate DWARF ".debug_pubnames" and ".debug_pubtypes" sections.

-ggnu-pubnames
Generate ".debug_pubnames" and ".debug_pubtypes" sections in a format suitable for conversion into a GDB index. This option is only
useful with a linker that can produce GDB index version 7.

-fdebug-types-section
When using DWARF Version 4 or higher, type DIEs can be put into their own ".debug_types" section instead of making them part of the
".debug_info" section. It is more efficient to put them in a separate comdat sections since the linker can then remove duplicates.
But not all DWARF consumers support ".debug_types" sections yet and on some objects ".debug_types" produces larger instead of smaller
debugging information.

-grecord-gcc-switches
-gno-record-gcc-switches
This switch causes the command-line options used to invoke the compiler that may affect code generation to be appended to the
DW_AT_producer attribute in DWARF debugging information. The options are concatenated with spaces separating them from each other and
from the compiler version. It is enabled by default. See also -frecord-gcc-switches for another way of storing compiler options into
the object file.

-gstrict-dwarf
Disallow using extensions of later DWARF standard version than selected with -gdwarf-version. On most targets using non-conflicting
DWARF extensions from later standard versions is allowed.

-gno-strict-dwarf
Allow using extensions of later DWARF standard version than selected with -gdwarf-version.

-gcolumn-info
-gno-column-info
Emit location column information into DWARF debugging information, rather than just file and line. This option is disabled by default.

-gz[=type]
Produce compressed debug sections in DWARF format, if that is supported. If type is not given, the default type depends on the
capabilities of the assembler and linker used. type may be one of none (don't compress debug sections), zlib (use zlib compression in
ELF gABI format), or zlib-gnu (use zlib compression in traditional GNU format). If the linker doesn't support writing compressed debug
sections, the option is rejected. Otherwise, if the assembler does not support them, -gz is silently ignored when producing object
files.

-feliminate-dwarf2-dups
Compress DWARF debugging information by eliminating duplicated information about each symbol. This option only makes sense when
generating DWARF debugging information.

-femit-struct-debug-baseonly
Emit debug information for struct-like types only when the base name of the compilation source file matches the base name of file in
which the struct is defined.

This option substantially reduces the size of debugging information, but at significant potential loss in type information to the
debugger. See -femit-struct-debug-reduced for a less aggressive option. See -femit-struct-debug-detailed for more detailed control.

This option works only with DWARF debug output.

-femit-struct-debug-reduced
Emit debug information for struct-like types only when the base name of the compilation source file matches the base name of file in
which the type is defined, unless the struct is a template or defined in a system header.

This option significantly reduces the size of debugging information, with some potential loss in type information to the debugger. See
-femit-struct-debug-baseonly for a more aggressive option. See -femit-struct-debug-detailed for more detailed control.

This option works only with DWARF debug output.

-femit-struct-debug-detailed[=spec-list]
Specify the struct-like types for which the compiler generates debug information. The intent is to reduce duplicate struct debug
information between different object files within the same program.

This option is a detailed version of -femit-struct-debug-reduced and -femit-struct-debug-baseonly, which serves for most needs.

The optional first word limits the specification to structs that are used directly (dir:) or used indirectly (ind:). A struct type is
used directly when it is the type of a variable, member. Indirect uses arise through pointers to structs. That is, when use of an
incomplete struct is valid, the use is indirect. An example is struct one direct; struct two * indirect;.

The optional second word limits the specification to ordinary structs (ord:) or generic structs (gen:). Generic structs are a bit
complicated to explain. For C++, these are non-explicit specializations of template classes, or non-template classes within the above.
Other programming languages have generics, but -femit-struct-debug-detailed does not yet implement them.

The third word specifies the source files for those structs for which the compiler should emit debug information. The values none and
any have the normal meaning. The value base means that the base of name of the file in which the type declaration appears must match
the base of the name of the main compilation file. In practice, this means that when compiling foo.c, debug information is generated
for types declared in that file and foo.h, but not other header files. The value sys means those types satisfying base or declared in
system or compiler headers.

You may need to experiment to determine the best settings for your application.

The default is -femit-struct-debug-detailed=all.

This option works only with DWARF debug output.

-fno-dwarf2-cfi-asm
Emit DWARF unwind info as compiler generated ".eh_frame" section instead of using GAS ".cfi_*" directives.

-fno-eliminate-unused-debug-types
Normally, when producing DWARF output, GCC avoids producing debug symbol output for types that are nowhere used in the source file
being compiled. Sometimes it is useful to have GCC emit debugging information for all types declared in a compilation unit, regardless
of whether or not they are actually used in that compilation unit, for example if, in the debugger, you want to cast a value to a type
that is not actually used in your program (but is declared). More often, however, this results in a significant amount of wasted
space.

Options That Control Optimization
These options control various sorts of optimizations.

Without any optimization option, the compiler's goal is to reduce the cost of compilation and to make debugging produce the expected
results. Statements are independent: if you stop the program with a breakpoint between statements, you can then assign a new value to any
variable or change the program counter to any other statement in the function and get exactly the results you expect from the source code.

Turning on optimization flags makes the compiler attempt to improve the performance and/or code size at the expense of compilation time and
possibly the ability to debug the program.

The compiler performs optimization based on the knowledge it has of the program. Compiling multiple files at once to a single output file
mode allows the compiler to use information gained from all of the files when compiling each of them.

Not all optimizations are controlled directly by a flag. Only optimizations that have a flag are listed in this section.

Most optimizations are only enabled if an -O level is set on the command line. Otherwise they are disabled, even if individual
optimization flags are specified.

Depending on the target and how GCC was configured, a slightly different set of optimizations may be enabled at each -O level than those
listed here. You can invoke GCC with -Q --help=optimizers to find out the exact set of optimizations that are enabled at each level.

-O
-O1 Optimize. Optimizing compilation takes somewhat more time, and a lot more memory for a large function.

With -O, the compiler tries to reduce code size and execution time, without performing any optimizations that take a great deal of
compilation time.

-O turns on the following optimization flags:

-fauto-inc-dec -fbranch-count-reg -fcombine-stack-adjustments -fcompare-elim -fcprop-registers -fdce -fdefer-pop -fdelayed-branch -fdse
-fforward-propagate -fguess-branch-probability -fif-conversion2 -fif-conversion -finline-functions-called-once -fipa-pure-const
-fipa-profile -fipa-reference -fmerge-constants -fmove-loop-invariants -freorder-blocks -fshrink-wrap -fshrink-wrap-separate
-fsplit-wide-types -fssa-backprop -fssa-phiopt -ftree-bit-ccp -ftree-ccp -ftree-ch -ftree-coalesce-vars -ftree-copy-prop -ftree-dce
-ftree-dominator-opts -ftree-dse -ftree-forwprop -ftree-fre -ftree-phiprop -ftree-sink -ftree-slsr -ftree-sra -ftree-pta -ftree-ter
-funit-at-a-time

-O also turns on -fomit-frame-pointer on machines where doing so does not interfere with debugging.

-O2 Optimize even more. GCC performs nearly all supported optimizations that do not involve a space-speed tradeoff. As compared to -O,
this option increases both compilation time and the performance of the generated code.

-O2 turns on all optimization flags specified by -O. It also turns on the following optimization flags: -fthread-jumps
-falign-functions -falign-jumps -falign-loops -falign-labels -fcaller-saves -fcrossjumping -fcse-follow-jumps -fcse-skip-blocks
-fdelete-null-pointer-checks -fdevirtualize -fdevirtualize-speculatively -fexpensive-optimizations -fgcse -fgcse-lm
-fhoist-adjacent-loads -finline-small-functions -findirect-inlining -fipa-cp -fipa-bit-cp -fipa-vrp -fipa-sra -fipa-icf
-fisolate-erroneous-paths-dereference -flra-remat -foptimize-sibling-calls -foptimize-strlen -fpartial-inlining -fpeephole2
-freorder-blocks-algorithm=stc -freorder-blocks-and-partition -freorder-functions -frerun-cse-after-loop -fsched-interblock
-fsched-spec -fschedule-insns -fschedule-insns2 -fstore-merging -fstrict-aliasing -fstrict-overflow -ftree-builtin-call-dce
-ftree-switch-conversion -ftree-tail-merge -fcode-hoisting -ftree-pre -ftree-vrp -fipa-ra

Please note the warning under -fgcse about invoking -O2 on programs that use computed gotos.

NOTE: In Ubuntu 8.10 and later versions, -D_FORTIFY_SOURCE=2 is set by default, and is activated when -O is set to 2 or higher. This
enables additional compile-time and run-time checks for several libc functions. To disable, specify either -U_FORTIFY_SOURCE or
-D_FORTIFY_SOURCE=0.

-O3 Optimize yet more. -O3 turns on all optimizations specified by -O2 and also turns on the -finline-functions, -funswitch-loops,
-fpredictive-commoning, -fgcse-after-reload, -ftree-loop-vectorize, -ftree-loop-distribute-patterns, -fsplit-paths
-ftree-slp-vectorize, -fvect-cost-model, -ftree-partial-pre, -fpeel-loops and -fipa-cp-clone options.

-O0 Reduce compilation time and make debugging produce the expected results. This is the default.

-Os Optimize for size. -Os enables all -O2 optimizations that do not typically increase code size. It also performs further optimizations
designed to reduce code size.

-Os disables the following optimization flags: -falign-functions -falign-jumps -falign-loops -falign-labels -freorder-blocks
-freorder-blocks-algorithm=stc -freorder-blocks-and-partition -fprefetch-loop-arrays

-Ofast
Disregard strict standards compliance. -Ofast enables all -O3 optimizations. It also enables optimizations that are not valid for all
standard-compliant programs. It turns on -ffast-math and the Fortran-specific -fno-protect-parens and -fstack-arrays.

-Og Optimize debugging experience. -Og enables optimizations that do not interfere with debugging. It should be the optimization level of
choice for the standard edit-compile-debug cycle, offering a reasonable level of optimization while maintaining fast compilation and a
good debugging experience.

If you use multiple -O options, with or without level numbers, the last such option is the one that is effective.

Options of the form -fflag specify machine-independent flags. Most flags have both positive and negative forms; the negative form of -ffoo
is -fno-foo. In the table below, only one of the forms is listed---the one you typically use. You can figure out the other form by either
removing no- or adding it.

The following options control specific optimizations. They are either activated by -O options or are related to ones that are. You can
use the following flags in the rare cases when "fine-tuning" of optimizations to be performed is desired.

-fno-defer-pop
Always pop the arguments to each function call as soon as that function returns. For machines that must pop arguments after a function
call, the compiler normally lets arguments accumulate on the stack for several function calls and pops them all at once.

Disabled at levels -O, -O2, -O3, -Os.

-fforward-propagate
Perform a forward propagation pass on RTL. The pass tries to combine two instructions and checks if the result can be simplified. If
loop unrolling is active, two passes are performed and the second is scheduled after loop unrolling.

This option is enabled by default at optimization levels -O, -O2, -O3, -Os.

-ffp-contract=style
-ffp-contract=off disables floating-point expression contraction. -ffp-contract=fast enables floating-point expression contraction
such as forming of fused multiply-add operations if the target has native support for them. -ffp-contract=on enables floating-point
expression contraction if allowed by the language standard. This is currently not implemented and treated equal to -ffp-contract=off.

The default is -ffp-contract=fast.

-fomit-frame-pointer
Don't keep the frame pointer in a register for functions that don't need one. This avoids the instructions to save, set up and restore
frame pointers; it also makes an extra register available in many functions. It also makes debugging impossible on some machines.

On some machines, such as the VAX, this flag has no effect, because the standard calling sequence automatically handles the frame
pointer and nothing is saved by pretending it doesn't exist. The machine-description macro "FRAME_POINTER_REQUIRED" controls whether a
target machine supports this flag.

The default setting (when not optimizing for size) for 32-bit GNU/Linux x86 and 32-bit Darwin x86 targets is -fomit-frame-pointer. You
can configure GCC with the --enable-frame-pointer configure option to change the default.

Enabled at levels -O, -O2, -O3, -Os.

-foptimize-sibling-calls
Optimize sibling and tail recursive calls.

Enabled at levels -O2, -O3, -Os.

-foptimize-strlen
Optimize various standard C string functions (e.g. "strlen", "strchr" or "strcpy") and their "_FORTIFY_SOURCE" counterparts into faster
alternatives.

Enabled at levels -O2, -O3.

-fno-inline
Do not expand any functions inline apart from those marked with the "always_inline" attribute. This is the default when not
optimizing.

Single functions can be exempted from inlining by marking them with the "noinline" attribute.

-finline-small-functions
Integrate functions into their callers when their body is smaller than expected function call code (so overall size of program gets
smaller). The compiler heuristically decides which functions are simple enough to be worth integrating in this way. This inlining
applies to all functions, even those not declared inline.

Enabled at level -O2.

-findirect-inlining
Inline also indirect calls that are discovered to be known at compile time thanks to previous inlining. This option has any effect
only when inlining itself is turned on by the -finline-functions or -finline-small-functions options.

Enabled at level -O2.

-finline-functions
Consider all functions for inlining, even if they are not declared inline. The compiler heuristically decides which functions are
worth integrating in this way.

If all calls to a given function are integrated, and the function is declared "static", then the function is normally not output as
assembler code in its own right.

Enabled at level -O3.

-finline-functions-called-once
Consider all "static" functions called once for inlining into their caller even if they are not marked "inline". If a call to a given
function is integrated, then the function is not output as assembler code in its own right.

Enabled at levels -O1, -O2, -O3 and -Os.

-fearly-inlining
Inline functions marked by "always_inline" and functions whose body seems smaller than the function call overhead early before doing
-fprofile-generate instrumentation and real inlining pass. Doing so makes profiling significantly cheaper and usually inlining faster
on programs having large chains of nested wrapper functions.

Enabled by default.

-fipa-sra
Perform interprocedural scalar replacement of aggregates, removal of unused parameters and replacement of parameters passed by
reference by parameters passed by value.

Enabled at levels -O2, -O3 and -Os.

-finline-limit=n
By default, GCC limits the size of functions that can be inlined. This flag allows coarse control of this limit. n is the size of
functions that can be inlined in number of pseudo instructions.

Inlining is actually controlled by a number of parameters, which may be specified individually by using --param name=value. The
-finline-limit=n option sets some of these parameters as follows:

max-inline-insns-single
is set to n/2.

max-inline-insns-auto
is set to n/2.

See below for a documentation of the individual parameters controlling inlining and for the defaults of these parameters.

Note: there may be no value to -finline-limit that results in default behavior.

Note: pseudo instruction represents, in this particular context, an abstract measurement of function's size. In no way does it
represent a count of assembly instructions and as such its exact meaning might change from one release to an another.

-fno-keep-inline-dllexport
This is a more fine-grained version of -fkeep-inline-functions, which applies only to functions that are declared using the "dllexport"
attribute or declspec.

-fkeep-inline-functions
In C, emit "static" functions that are declared "inline" into the object file, even if the function has been inlined into all of its
callers. This switch does not affect functions using the "extern inline" extension in GNU C90. In C++, emit any and all inline
functions into the object file.

-fkeep-static-functions
Emit "static" functions into the object file, even if the function is never used.

-fkeep-static-consts
Emit variables declared "static const" when optimization isn't turned on, even if the variables aren't referenced.

GCC enables this option by default. If you want to force the compiler to check if a variable is referenced, regardless of whether or
not optimization is turned on, use the -fno-keep-static-consts option.

-fmerge-constants
Attempt to merge identical constants (string constants and floating-point constants) across compilation units.

This option is the default for optimized compilation if the assembler and linker support it. Use -fno-merge-constants to inhibit this
behavior.

Enabled at levels -O, -O2, -O3, -Os.

-fmerge-all-constants
Attempt to merge identical constants and identical variables.

This option implies -fmerge-constants. In addition to -fmerge-constants this considers e.g. even constant initialized arrays or
initialized constant variables with integral or floating-point types. Languages like C or C++ require each variable, including
multiple instances of the same variable in recursive calls, to have distinct locations, so using this option results in non-conforming
behavior.

-fmodulo-sched
Perform swing modulo scheduling immediately before the first scheduling pass. This pass looks at innermost loops and reorders their
instructions by overlapping different iterations.

-fmodulo-sched-allow-regmoves
Perform more aggressive SMS-based modulo scheduling with register moves allowed. By setting this flag certain anti-dependences edges
are deleted, which triggers the generation of reg-moves based on the life-range analysis. This option is effective only with
-fmodulo-sched enabled.

-fno-branch-count-reg
Avoid running a pass scanning for opportunities to use "decrement and branch" instructions on a count register instead of generating
sequences of instructions that decrement a register, compare it against zero, and then branch based upon the result. This option is
only meaningful on architectures that support such instructions, which include x86, PowerPC, IA-64 and S/390. Note that the
-fno-branch-count-reg option doesn't remove the decrement and branch instructions from the generated instruction stream introduced by
other optimization passes.

Enabled by default at -O1 and higher.

The default is -fbranch-count-reg.

-fno-function-cse
Do not put function addresses in registers; make each instruction that calls a constant function contain the function's address
explicitly.

This option results in less efficient code, but some strange hacks that alter the assembler output may be confused by the optimizations
performed when this option is not used.

The default is -ffunction-cse

-fno-zero-initialized-in-bss
If the target supports a BSS section, GCC by default puts variables that are initialized to zero into BSS. This can save space in the
resulting code.

This option turns off this behavior because some programs explicitly rely on variables going to the data section---e.g., so that the
resulting executable can find the beginning of that section and/or make assumptions based on that.

The default is -fzero-initialized-in-bss.

-fthread-jumps
Perform optimizations that check to see if a jump branches to a location where another comparison subsumed by the first is found. If
so, the first branch is redirected to either the destination of the second branch or a point immediately following it, depending on
whether the condition is known to be true or false.

Enabled at levels -O2, -O3, -Os.

-fsplit-wide-types
When using a type that occupies multiple registers, such as "long long" on a 32-bit system, split the registers apart and allocate them
independently. This normally generates better code for those types, but may make debugging more difficult.

Enabled at levels -O, -O2, -O3, -Os.

-fcse-follow-jumps
In common subexpression elimination (CSE), scan through jump instructions when the target of the jump is not reached by any other path.
For example, when CSE encounters an "if" statement with an "else" clause, CSE follows the jump when the condition tested is false.

Enabled at levels -O2, -O3, -Os.

-fcse-skip-blocks
This is similar to -fcse-follow-jumps, but causes CSE to follow jumps that conditionally skip over blocks. When CSE encounters a
simple "if" statement with no else clause, -fcse-skip-blocks causes CSE to follow the jump around the body of the "if".

Enabled at levels -O2, -O3, -Os.

-frerun-cse-after-loop
Re-run common subexpression elimination after loop optimizations are performed.

Enabled at levels -O2, -O3, -Os.

-fgcse
Perform a global common subexpression elimination pass. This pass also performs global constant and copy propagation.

Note: When compiling a program using computed gotos, a GCC extension, you may get better run-time performance if you disable the global
common subexpression elimination pass by adding -fno-gcse to the command line.

Enabled at levels -O2, -O3, -Os.

-fgcse-lm
When -fgcse-lm is enabled, global common subexpression elimination attempts to move loads that are only killed by stores into
themselves. This allows a loop containing a load/store sequence to be changed to a load outside the loop, and a copy/store within the
loop.

Enabled by default when -fgcse is enabled.

-fgcse-sm
When -fgcse-sm is enabled, a store motion pass is run after global common subexpression elimination. This pass attempts to move stores
out of loops. When used in conjunction with -fgcse-lm, loops containing a load/store sequence can be changed to a load before the loop
and a store after the loop.

Not enabled at any optimization level.

-fgcse-las
When -fgcse-las is enabled, the global common subexpression elimination pass eliminates redundant loads that come after stores to the
same memory location (both partial and full redundancies).

Not enabled at any optimization level.

-fgcse-after-reload
When -fgcse-after-reload is enabled, a redundant load elimination pass is performed after reload. The purpose of this pass is to clean
up redundant spilling.

-faggressive-loop-optimizations
This option tells the loop optimizer to use language constraints to derive bounds for the number of iterations of a loop. This assumes
that loop code does not invoke undefined behavior by for example causing signed integer overflows or out-of-bound array accesses. The
bounds for the number of iterations of a loop are used to guide loop unrolling and peeling and loop exit test optimizations. This
option is enabled by default.

-funconstrained-commons
This option tells the compiler that variables declared in common blocks (e.g. Fortran) may later be overridden with longer trailing
arrays. This prevents certain optimizations that depend on knowing the array bounds.

-fcrossjumping
Perform cross-jumping transformation. This transformation unifies equivalent code and saves code size. The resulting code may or may
not perform better than without cross-jumping.

Enabled at levels -O2, -O3, -Os.

-fauto-inc-dec
Combine increments or decrements of addresses with memory accesses. This pass is always skipped on architectures that do not have
instructions to support this. Enabled by default at -O and higher on architectures that support this.

-fdce
Perform dead code elimination (DCE) on RTL. Enabled by default at -O and higher.

-fdse
Perform dead store elimination (DSE) on RTL. Enabled by default at -O and higher.

-fif-conversion
Attempt to transform conditional jumps into branch-less equivalents. This includes use of conditional moves, min, max, set flags and
abs instructions, and some tricks doable by standard arithmetics. The use of conditional execution on chips where it is available is
controlled by -fif-conversion2.

Enabled at levels -O, -O2, -O3, -Os.

-fif-conversion2
Use conditional execution (where available) to transform conditional jumps into branch-less equivalents.

Enabled at levels -O, -O2, -O3, -Os.

-fdeclone-ctor-dtor
The C++ ABI requires multiple entry points for constructors and destructors: one for a base subobject, one for a complete object, and
one for a virtual destructor that calls operator delete afterwards. For a hierarchy with virtual bases, the base and complete variants
are clones, which means two copies of the function. With this option, the base and complete variants are changed to be thunks that
call a common implementation.

Enabled by -Os.

-fdelete-null-pointer-checks
Assume that programs cannot safely dereference null pointers, and that no code or data element resides at address zero. This option
enables simple constant folding optimizations at all optimization levels. In addition, other optimization passes in GCC use this flag
to control global dataflow analyses that eliminate useless checks for null pointers; these assume that a memory access to address zero
always results in a trap, so that if a pointer is checked after it has already been dereferenced, it cannot be null.

Note however that in some environments this assumption is not true. Use -fno-delete-null-pointer-checks to disable this optimization
for programs that depend on that behavior.

This option is enabled by default on most targets. On Nios II ELF, it defaults to off. On AVR and CR16, this option is completely
disabled.

Passes that use the dataflow information are enabled independently at different optimization levels.

-fdevirtualize
Attempt to convert calls to virtual functions to direct calls. This is done both within a procedure and interprocedurally as part of
indirect inlining (-findirect-inlining) and interprocedural constant propagation (-fipa-cp). Enabled at levels -O2, -O3, -Os.

-fdevirtualize-speculatively
Attempt to convert calls to virtual functions to speculative direct calls. Based on the analysis of the type inheritance graph,
determine for a given call the set of likely targets. If the set is small, preferably of size 1, change the call into a conditional
deciding between direct and indirect calls. The speculative calls enable more optimizations, such as inlining. When they seem useless
after further optimization, they are converted back into original form.

-fdevirtualize-at-ltrans
Stream extra information needed for aggressive devirtualization when running the link-time optimizer in local transformation mode.
This option enables more devirtualization but significantly increases the size of streamed data. For this reason it is disabled by
default.

-fexpensive-optimizations
Perform a number of minor optimizations that are relatively expensive.

Enabled at levels -O2, -O3, -Os.

-free
Attempt to remove redundant extension instructions. This is especially helpful for the x86-64 architecture, which implicitly zero-
extends in 64-bit registers after writing to their lower 32-bit half.

Enabled for Alpha, AArch64 and x86 at levels -O2, -O3, -Os.

-fno-lifetime-dse
In C++ the value of an object is only affected by changes within its lifetime: when the constructor begins, the object has an
indeterminate value, and any changes during the lifetime of the object are dead when the object is destroyed. Normally dead store
elimination will take advantage of this; if your code relies on the value of the object storage persisting beyond the lifetime of the
object, you can use this flag to disable this optimization. To preserve stores before the constructor starts (e.g. because your
operator new clears the object storage) but still treat the object as dead after the destructor you, can use -flifetime-dse=1. The
default behavior can be explicitly selected with -flifetime-dse=2. -flifetime-dse=0 is equivalent to -fno-lifetime-dse.

-flive-range-shrinkage
Attempt to decrease register pressure through register live range shrinkage. This is helpful for fast processors with small or
moderate size register sets.

-fira-algorithm=algorithm
Use the specified coloring algorithm for the integrated register allocator. The algorithm argument can be priority, which specifies
Chow's priority coloring, or CB, which specifies Chaitin-Briggs coloring. Chaitin-Briggs coloring is not implemented for all
architectures, but for those targets that do support it, it is the default because it generates better code.

-fira-region=region
Use specified regions for the integrated register allocator. The region argument should be one of the following:

all Use all loops as register allocation regions. This can give the best results for machines with a small and/or irregular register
set.

mixed
Use all loops except for loops with small register pressure as the regions. This value usually gives the best results in most
cases and for most architectures, and is enabled by default when compiling with optimization for speed (-O, -O2, ...).

one Use all functions as a single region. This typically results in the smallest code size, and is enabled by default for -Os or -O0.

-fira-hoist-pressure
Use IRA to evaluate register pressure in the code hoisting pass for decisions to hoist expressions. This option usually results in
smaller code, but it can slow the compiler down.

This option is enabled at level -Os for all targets.

-fira-loop-pressure
Use IRA to evaluate register pressure in loops for decisions to move loop invariants. This option usually results in generation of
faster and smaller code on machines with large register files (>= 32 registers), but it can slow the compiler down.

This option is enabled at level -O3 for some targets.

-fno-ira-share-save-slots
Disable sharing of stack slots used for saving call-used hard registers living through a call. Each hard register gets a separate
stack slot, and as a result function stack frames are larger.

-fno-ira-share-spill-slots
Disable sharing of stack slots allocated for pseudo-registers. Each pseudo-register that does not get a hard register gets a separate
stack slot, and as a result function stack frames are larger.

-flra-remat
Enable CFG-sensitive rematerialization in LRA. Instead of loading values of spilled pseudos, LRA tries to rematerialize (recalculate)
values if it is profitable.

Enabled at levels -O2, -O3, -Os.

-fdelayed-branch
If supported for the target machine, attempt to reorder instructions to exploit instruction slots available after delayed branch
instructions.

Enabled at levels -O, -O2, -O3, -Os.

-fschedule-insns
If supported for the target machine, attempt to reorder instructions to eliminate execution stalls due to required data being
unavailable. This helps machines that have slow floating point or memory load instructions by allowing other instructions to be issued
until the result of the load or floating-point instruction is required.

Enabled at levels -O2, -O3.

-fschedule-insns2
Similar to -fschedule-insns, but requests an additional pass of instruction scheduling after register allocation has been done. This
is especially useful on machines with a relatively small number of registers and where memory load instructions take more than one
cycle.

Enabled at levels -O2, -O3, -Os.

-fno-sched-interblock
Don't schedule instructions across basic blocks. This is normally enabled by default when scheduling before register allocation, i.e.
with -fschedule-insns or at -O2 or higher.

-fno-sched-spec
Don't allow speculative motion of non-load instructions. This is normally enabled by default when scheduling before register
allocation, i.e. with -fschedule-insns or at -O2 or higher.

-fsched-pressure
Enable register pressure sensitive insn scheduling before register allocation. This only makes sense when scheduling before register
allocation is enabled, i.e. with -fschedule-insns or at -O2 or higher. Usage of this option can improve the generated code and
decrease its size by preventing register pressure increase above the number of available hard registers and subsequent spills in
register allocation.

-fsched-spec-load
Allow speculative motion of some load instructions. This only makes sense when scheduling before register allocation, i.e. with
-fschedule-insns or at -O2 or higher.

-fsched-spec-load-dangerous
Allow speculative motion of more load instructions. This only makes sense when scheduling before register allocation, i.e. with
-fschedule-insns or at -O2 or higher.

-fsched-stalled-insns
-fsched-stalled-insns=n
Define how many insns (if any) can be moved prematurely from the queue of stalled insns into the ready list during the second
scheduling pass. -fno-sched-stalled-insns means that no insns are moved prematurely, -fsched-stalled-insns=0 means there is no limit
on how many queued insns can be moved prematurely. -fsched-stalled-insns without a value is equivalent to -fsched-stalled-insns=1.

-fsched-stalled-insns-dep
-fsched-stalled-insns-dep=n
Define how many insn groups (cycles) are examined for a dependency on a stalled insn that is a candidate for premature removal from the
queue of stalled insns. This has an effect only during the second scheduling pass, and only if -fsched-stalled-insns is used.
-fno-sched-stalled-insns-dep is equivalent to -fsched-stalled-insns-dep=0. -fsched-stalled-insns-dep without a value is equivalent to
-fsched-stalled-insns-dep=1.

-fsched2-use-superblocks
When scheduling after register allocation, use superblock scheduling. This allows motion across basic block boundaries, resulting in
faster schedules. This option is experimental, as not all machine descriptions used by GCC model the CPU closely enough to avoid
unreliable results from the algorithm.

This only makes sense when scheduling after register allocation, i.e. with -fschedule-insns2 or at -O2 or higher.

-fsched-group-heuristic
Enable the group heuristic in the scheduler. This heuristic favors the instruction that belongs to a schedule group. This is enabled
by default when scheduling is enabled, i.e. with -fschedule-insns or -fschedule-insns2 or at -O2 or higher.

-fsched-critical-path-heuristic
Enable the critical-path heuristic in the scheduler. This heuristic favors instructions on the critical path. This is enabled by
default when scheduling is enabled, i.e. with -fschedule-insns or -fschedule-insns2 or at -O2 or higher.

-fsched-spec-insn-heuristic
Enable the speculative instruction heuristic in the scheduler. This heuristic favors speculative instructions with greater dependency
weakness. This is enabled by default when scheduling is enabled, i.e. with -fschedule-insns or -fschedule-insns2 or at -O2 or higher.

-fsched-rank-heuristic
Enable the rank heuristic in the scheduler. This heuristic favors the instruction belonging to a basic block with greater size or
frequency. This is enabled by default when scheduling is enabled, i.e. with -fschedule-insns or -fschedule-insns2 or at -O2 or
higher.

-fsched-last-insn-heuristic
Enable the last-instruction heuristic in the scheduler. This heuristic favors the instruction that is less dependent on the last
instruction scheduled. This is enabled by default when scheduling is enabled, i.e. with -fschedule-insns or -fschedule-insns2 or at
-O2 or higher.

-fsched-dep-count-heuristic
Enable the dependent-count heuristic in the scheduler. This heuristic favors the instruction that has more instructions depending on
it. This is enabled by default when scheduling is enabled, i.e. with -fschedule-insns or -fschedule-insns2 or at -O2 or higher.

-freschedule-modulo-scheduled-loops
Modulo scheduling is performed before traditional scheduling. If a loop is modulo scheduled, later scheduling passes may change its
schedule. Use this option to control that behavior.

-fselective-scheduling
Schedule instructions using selective scheduling algorithm. Selective scheduling runs instead of the first scheduler pass.

-fselective-scheduling2
Schedule instructions using selective scheduling algorithm. Selective scheduling runs instead of the second scheduler pass.

-fsel-sched-pipelining
Enable software pipelining of innermost loops during selective scheduling. This option has no effect unless one of
-fselective-scheduling or -fselective-scheduling2 is turned on.

-fsel-sched-pipelining-outer-loops
When pipelining loops during selective scheduling, also pipeline outer loops. This option has no effect unless -fsel-sched-pipelining
is turned on.

-fsemantic-interposition
Some object formats, like ELF, allow interposing of symbols by the dynamic linker. This means that for symbols exported from the DSO,
the compiler cannot perform interprocedural propagation, inlining and other optimizations in anticipation that the function or variable
in question may change. While this feature is useful, for example, to rewrite memory allocation functions by a debugging
implementation, it is expensive in the terms of code quality. With -fno-semantic-interposition the compiler assumes that if
interposition happens for functions the overwriting function will have precisely the same semantics (and side effects). Similarly if
interposition happens for variables, the constructor of the variable will be the same. The flag has no effect for functions explicitly
declared inline (where it is never allowed for interposition to change semantics) and for symbols explicitly declared weak.

-fshrink-wrap
Emit function prologues only before parts of the function that need it, rather than at the top of the function. This flag is enabled
by default at -O and higher.

-fshrink-wrap-separate
Shrink-wrap separate parts of the prologue and epilogue separately, so that those parts are only executed when needed. This option is
on by default, but has no effect unless -fshrink-wrap is also turned on and the target supports this.

-fcaller-saves
Enable allocation of values to registers that are clobbered by function calls, by emitting extra instructions to save and restore the
registers around such calls. Such allocation is done only when it seems to result in better code.

This option is always enabled by default on certain machines, usually those which have no call-preserved registers to use instead.

Enabled at levels -O2, -O3, -Os.

-fcombine-stack-adjustments
Tracks stack adjustments (pushes and pops) and stack memory references and then tries to find ways to combine them.

Enabled by default at -O1 and higher.

-fipa-ra
Use caller save registers for allocation if those registers are not used by any called function. In that case it is not necessary to
save and restore them around calls. This is only possible if called functions are part of same compilation unit as current function
and they are compiled before it.

Enabled at levels -O2, -O3, -Os, however the option is disabled if generated code will be instrumented for profiling (-p, or -pg) or if
callee's register usage cannot be known exactly (this happens on targets that do not expose prologues and epilogues in RTL).

-fconserve-stack
Attempt to minimize stack usage. The compiler attempts to use less stack space, even if that makes the program slower. This option
implies setting the large-stack-frame parameter to 100 and the large-stack-frame-growth parameter to 400.

-ftree-reassoc
Perform reassociation on trees. This flag is enabled by default at -O and higher.

-fcode-hoisting
Perform code hoisting. Code hoisting tries to move the evaluation of expressions executed on all paths to the function exit as early
as possible. This is especially useful as a code size optimization, but it often helps for code speed as well. This flag is enabled
by default at -O2 and higher.

-ftree-pre
Perform partial redundancy elimination (PRE) on trees. This flag is enabled by default at -O2 and -O3.

-ftree-partial-pre
Make partial redundancy elimination (PRE) more aggressive. This flag is enabled by default at -O3.

-ftree-forwprop
Perform forward propagation on trees. This flag is enabled by default at -O and higher.

-ftree-fre
Perform full redundancy elimination (FRE) on trees. The difference between FRE and PRE is that FRE only considers expressions that are
computed on all paths leading to the redundant computation. This analysis is faster than PRE, though it exposes fewer redundancies.
This flag is enabled by default at -O and higher.

-ftree-phiprop
Perform hoisting of loads from conditional pointers on trees. This pass is enabled by default at -O and higher.

-fhoist-adjacent-loads
Speculatively hoist loads from both branches of an if-then-else if the loads are from adjacent locations in the same structure and the
target architecture has a conditional move instruction. This flag is enabled by default at -O2 and higher.

-ftree-copy-prop
Perform copy propagation on trees. This pass eliminates unnecessary copy operations. This flag is enabled by default at -O and
higher.

-fipa-pure-const
Discover which functions are pure or constant. Enabled by default at -O and higher.

-fipa-reference
Discover which static variables do not escape the compilation unit. Enabled by default at -O and higher.

-fipa-pta
Perform interprocedural pointer analysis and interprocedural modification and reference analysis. This option can cause excessive
memory and compile-time usage on large compilation units. It is not enabled by default at any optimization level.

-fipa-profile
Perform interprocedural profile propagation. The functions called only from cold functions are marked as cold. Also functions executed
once (such as "cold", "noreturn", static constructors or destructors) are identified. Cold functions and loop less parts of functions
executed once are then optimized for size. Enabled by default at -O and higher.

-fipa-cp
Perform interprocedural constant propagation. This optimization analyzes the program to determine when values passed to functions are
constants and then optimizes accordingly. This optimization can substantially increase performance if the application has constants
passed to functions. This flag is enabled by default at -O2, -Os and -O3.

-fipa-cp-clone
Perform function cloning to make interprocedural constant propagation stronger. When enabled, interprocedural constant propagation
performs function cloning when externally visible function can be called with constant arguments. Because this optimization can create
multiple copies of functions, it may significantly increase code size (see --param ipcp-unit-growth=value). This flag is enabled by
default at -O3.

-fipa-bit-cp
When enabled, perform interprocedural bitwise constant propagation. This flag is enabled by default at -O2. It requires that -fipa-cp
is enabled.

-fipa-vrp
When enabled, perform interprocedural propagation of value ranges. This flag is enabled by default at -O2. It requires that -fipa-cp is
enabled.

-fipa-icf
Perform Identical Code Folding for functions and read-only variables. The optimization reduces code size and may disturb unwind stacks
by replacing a function by equivalent one with a different name. The optimization works more effectively with link-time optimization
enabled.

Nevertheless the behavior is similar to Gold Linker ICF optimization, GCC ICF works on different levels and thus the optimizations are
not same - there are equivalences that are found only by GCC and equivalences found only by Gold.

This flag is enabled by default at -O2 and -Os.

-fisolate-erroneous-paths-dereference
Detect paths that trigger erroneous or undefined behavior due to dereferencing a null pointer. Isolate those paths from the main
control flow and turn the statement with erroneous or undefined behavior into a trap. This flag is enabled by default at -O2 and
higher and depends on -fdelete-null-pointer-checks also being enabled.

-fisolate-erroneous-paths-attribute
Detect paths that trigger erroneous or undefined behavior due to a null value being used in a way forbidden by a "returns_nonnull" or
"nonnull" attribute. Isolate those paths from the main control flow and turn the statement with erroneous or undefined behavior into a
trap. This is not currently enabled, but may be enabled by -O2 in the future.

-ftree-sink
Perform forward store motion on trees. This flag is enabled by default at -O and higher.

-ftree-bit-ccp
Perform sparse conditional bit constant propagation on trees and propagate pointer alignment information. This pass only operates on
local scalar variables and is enabled by default at -O and higher. It requires that -ftree-ccp is enabled.

-ftree-ccp
Perform sparse conditional constant propagation (CCP) on trees. This pass only operates on local scalar variables and is enabled by
default at -O and higher.

-fssa-backprop
Propagate information about uses of a value up the definition chain in order to simplify the definitions. For example, this pass
strips sign operations if the sign of a value never matters. The flag is enabled by default at -O and higher.

-fssa-phiopt
Perform pattern matching on SSA PHI nodes to optimize conditional code. This pass is enabled by default at -O and higher.

-ftree-switch-conversion
Perform conversion of simple initializations in a switch to initializations from a scalar array. This flag is enabled by default at
-O2 and higher.

-ftree-tail-merge
Look for identical code sequences. When found, replace one with a jump to the other. This optimization is known as tail merging or
cross jumping. This flag is enabled by default at -O2 and higher. The compilation time in this pass can be limited using max-tail-
merge-comparisons parameter and max-tail-merge-iterations parameter.

-ftree-dce
Perform dead code elimination (DCE) on trees. This flag is enabled by default at -O and higher.

-ftree-builtin-call-dce
Perform conditional dead code elimination (DCE) for calls to built-in functions that may set "errno" but are otherwise side-effect
free. This flag is enabled by default at -O2 and higher if -Os is not also specified.

-ftree-dominator-opts
Perform a variety of simple scalar cleanups (constant/copy propagation, redundancy elimination, range propagation and expression
simplification) based on a dominator tree traversal. This also performs jump threading (to reduce jumps to jumps). This flag is
enabled by default at -O and higher.

-ftree-dse
Perform dead store elimination (DSE) on trees. A dead store is a store into a memory location that is later overwritten by another
store without any intervening loads. In this case the earlier store can be deleted. This flag is enabled by default at -O and higher.

-ftree-ch
Perform loop header copying on trees. This is beneficial since it increases effectiveness of code motion optimizations. It also saves
one jump. This flag is enabled by default at -O and higher. It is not enabled for -Os, since it usually increases code size.

-ftree-loop-optimize
Perform loop optimizations on trees. This flag is enabled by default at -O and higher.

-ftree-loop-linear
-floop-interchange
-floop-strip-mine
-floop-block
-floop-unroll-and-jam
Perform loop nest optimizations. Same as -floop-nest-optimize. To use this code transformation, GCC has to be configured with
--with-isl to enable the Graphite loop transformation infrastructure.

-fgraphite-identity
Enable the identity transformation for graphite. For every SCoP we generate the polyhedral representation and transform it back to
gimple. Using -fgraphite-identity we can check the costs or benefits of the GIMPLE -> GRAPHITE -> GIMPLE transformation. Some minimal
optimizations are also performed by the code generator isl, like index splitting and dead code elimination in loops.

-floop-nest-optimize
Enable the isl based loop nest optimizer. This is a generic loop nest optimizer based on the Pluto optimization algorithms. It
calculates a loop structure optimized for data-locality and parallelism. This option is experimental.

-floop-parallelize-all
Use the Graphite data dependence analysis to identify loops that can be parallelized. Parallelize all the loops that can be analyzed
to not contain loop carried dependences without checking that it is profitable to parallelize the loops.

-ftree-coalesce-vars
While transforming the program out of the SSA representation, attempt to reduce copying by coalescing versions of different user-
defined variables, instead of just compiler temporaries. This may severely limit the ability to debug an optimized program compiled
with -fno-var-tracking-assignments. In the negated form, this flag prevents SSA coalescing of user variables. This option is enabled
by default if optimization is enabled, and it does very little otherwise.

-ftree-loop-if-convert
Attempt to transform conditional jumps in the innermost loops to branch-less equivalents. The intent is to remove control-flow from
the innermost loops in order to improve the ability of the vectorization pass to handle these loops. This is enabled by default if
vectorization is enabled.

-ftree-loop-distribution
Perform loop distribution. This flag can improve cache performance on big loop bodies and allow further loop optimizations, like
parallelization or vectorization, to take place. For example, the loop

DO I = 1, N
A(I) = B(I) + C
D(I) = E(I) * F
ENDDO

is transformed to

DO I = 1, N
A(I) = B(I) + C
ENDDO
DO I = 1, N
D(I) = E(I) * F
ENDDO

-ftree-loop-distribute-patterns
Perform loop distribution of patterns that can be code generated with calls to a library. This flag is enabled by default at -O3.

This pass distributes the initialization loops and generates a call to memset zero. For example, the loop

DO I = 1, N
A(I) = 0
B(I) = A(I) + I
ENDDO

is transformed to

DO I = 1, N
A(I) = 0
ENDDO
DO I = 1, N
B(I) = A(I) + I
ENDDO

and the initialization loop is transformed into a call to memset zero.

-ftree-loop-im
Perform loop invariant motion on trees. This pass moves only invariants that are hard to handle at RTL level (function calls,
operations that expand to nontrivial sequences of insns). With -funswitch-loops it also moves operands of conditions that are
invariant out of the loop, so that we can use just trivial invariantness analysis in loop unswitching. The pass also includes store
motion.

-ftree-loop-ivcanon
Create a canonical counter for number of iterations in loops for which determining number of iterations requires complicated analysis.
Later optimizations then may determine the number easily. Useful especially in connection with unrolling.

-fivopts
Perform induction variable optimizations (strength reduction, induction variable merging and induction variable elimination) on trees.

-ftree-parallelize-loops=n
Parallelize loops, i.e., split their iteration space to run in n threads. This is only possible for loops whose iterations are
independent and can be arbitrarily reordered. The optimization is only profitable on multiprocessor machines, for loops that are CPU-
intensive, rather than constrained e.g. by memory bandwidth. This option implies -pthread, and thus is only supported on targets that
have support for -pthread.

-ftree-pta
Perform function-local points-to analysis on trees. This flag is enabled by default at -O and higher.

-ftree-sra
Perform scalar replacement of aggregates. This pass replaces structure references with scalars to prevent committing structures to
memory too early. This flag is enabled by default at -O and higher.

-fstore-merging
Perform merging of narrow stores to consecutive memory addresses. This pass merges contiguous stores of immediate values narrower than
a word into fewer wider stores to reduce the number of instructions. This is enabled by default at -O2 and higher as well as -Os.

-ftree-ter
Perform temporary expression replacement during the SSA->normal phase. Single use/single def temporaries are replaced at their use
location with their defining expression. This results in non-GIMPLE code, but gives the expanders much more complex trees to work on
resulting in better RTL generation. This is enabled by default at -O and higher.

-ftree-slsr
Perform straight-line strength reduction on trees. This recognizes related expressions involving multiplications and replaces them by
less expensive calculations when possible. This is enabled by default at -O and higher.

-ftree-vectorize
Perform vectorization on trees. This flag enables -ftree-loop-vectorize and -ftree-slp-vectorize if not explicitly specified.

-ftree-loop-vectorize
Perform loop vectorization on trees. This flag is enabled by default at -O3 and when -ftree-vectorize is enabled.

-ftree-slp-vectorize
Perform basic block vectorization on trees. This flag is enabled by default at -O3 and when -ftree-vectorize is enabled.

-fvect-cost-model=model
Alter the cost model used for vectorization. The model argument should be one of unlimited, dynamic or cheap. With the unlimited
model the vectorized code-path is assumed to be profitable while with the dynamic model a runtime check guards the vectorized code-path
to enable it only for iteration counts that will likely execute faster than when executing the original scalar loop. The cheap model
disables vectorization of loops where doing so would be cost prohibitive for example due to required runtime checks for data dependence
or alignment but otherwise is equal to the dynamic model. The default cost model depends on other optimization flags and is either
dynamic or cheap.

-fsimd-cost-model=model
Alter the cost model used for vectorization of loops marked with the OpenMP or Cilk Plus simd directive. The model argument should be
one of unlimited, dynamic, cheap. All values of model have the same meaning as described in -fvect-cost-model and by default a cost
model defined with -fvect-cost-model is used.

-ftree-vrp
Perform Value Range Propagation on trees. This is similar to the constant propagation pass, but instead of values, ranges of values
are propagated. This allows the optimizers to remove unnecessary range checks like array bound checks and null pointer checks. This
is enabled by default at -O2 and higher. Null pointer check elimination is only done if -fdelete-null-pointer-checks is enabled.

-fsplit-paths
Split paths leading to loop backedges. This can improve dead code elimination and common subexpression elimination. This is enabled
by default at -O2 and above.

-fsplit-ivs-in-unroller
Enables expression of values of induction variables in later iterations of the unrolled loop using the value in the first iteration.
This breaks long dependency chains, thus improving efficiency of the scheduling passes.

A combination of -fweb and CSE is often sufficient to obtain the same effect. However, that is not reliable in cases where the loop
body is more complicated than a single basic block. It also does not work at all on some architectures due to restrictions in the CSE
pass.

This optimization is enabled by default.

-fvariable-expansion-in-unroller
With this option, the compiler creates multiple copies of some local variables when unrolling a loop, which can result in superior
code.

-fpartial-inlining
Inline parts of functions. This option has any effect only when inlining itself is turned on by the -finline-functions or
-finline-small-functions options.

Enabled at level -O2.

-fpredictive-commoning
Perform predictive commoning optimization, i.e., reusing computations (especially memory loads and stores) performed in previous
iterations of loops.

This option is enabled at level -O3.

-fprefetch-loop-arrays
If supported by the target machine, generate instructions to prefetch memory to improve the performance of loops that access large
arrays.

This option may generate better or worse code; results are highly dependent on the structure of loops within the source code.

Disabled at level -Os.

-fno-printf-return-value
Do not substitute constants for known return value of formatted output functions such as "sprintf", "snprintf", "vsprintf", and
"vsnprintf" (but not "printf" of "fprintf"). This transformation allows GCC to optimize or even eliminate branches based on the known
return value of these functions called with arguments that are either constant, or whose values are known to be in a range that makes
determining the exact return value possible. For example, when -fprintf-return-value is in effect, both the branch and the body of the
"if" statement (but not the call to "snprint") can be optimized away when "i" is a 32-bit or smaller integer because the return value
is guaranteed to be at most 8.

char buf[9];
if (snprintf (buf, "%08x", i) >= sizeof buf)
...

The -fprintf-return-value option relies on other optimizations and yields best results with -O2. It works in tandem with the
-Wformat-overflow and -Wformat-truncation options. The -fprintf-return-value option is enabled by default.

-fno-peephole
-fno-peephole2
Disable any machine-specific peephole optimizations. The difference between -fno-peephole and -fno-peephole2 is in how they are
implemented in the compiler; some targets use one, some use the other, a few use both.

-fpeephole is enabled by default. -fpeephole2 enabled at levels -O2, -O3, -Os.

-fno-guess-branch-probability
Do not guess branch probabilities using heuristics.

GCC uses heuristics to guess branch probabilities if they are not provided by profiling feedback (-fprofile-arcs). These heuristics
are based on the control flow graph. If some branch probabilities are specified by "__builtin_expect", then the heuristics are used to
guess branch probabilities for the rest of the control flow graph, taking the "__builtin_expect" info into account. The interactions
between the heuristics and "__builtin_expect" can be complex, and in some cases, it may be useful to disable the heuristics so that the
effects of "__builtin_expect" are easier to understand.

The default is -fguess-branch-probability at levels -O, -O2, -O3, -Os.

-freorder-blocks
Reorder basic blocks in the compiled function in order to reduce number of taken branches and improve code locality.

Enabled at levels -O, -O2, -O3, -Os.

-freorder-blocks-algorithm=algorithm
Use the specified algorithm for basic block reordering. The algorithm argument can be simple, which does not increase code size
(except sometimes due to secondary effects like alignment), or stc, the "software trace cache" algorithm, which tries to put all often
executed code together, minimizing the number of branches executed by making extra copies of code.

The default is simple at levels -O, -Os, and stc at levels -O2, -O3.

-freorder-blocks-and-partition
In addition to reordering basic blocks in the compiled function, in order to reduce number of taken branches, partitions hot and cold
basic blocks into separate sections of the assembly and .o files, to improve paging and cache locality performance.

This optimization is automatically turned off in the presence of exception handling, for linkonce sections, for functions with a user-
defined section attribute and on any architecture that does not support named sections.

Enabled for x86 at levels -O2, -O3.

-freorder-functions
Reorder functions in the object file in order to improve code locality. This is implemented by using special subsections ".text.hot"
for most frequently executed functions and ".text.unlikely" for unlikely executed functions. Reordering is done by the linker so
object file format must support named sections and linker must place them in a reasonable way.

Also profile feedback must be available to make this option effective. See -fprofile-arcs for details.

Enabled at levels -O2, -O3, -Os.

-fstrict-aliasing
Allow the compiler to assume the strictest aliasing rules applicable to the language being compiled. For C (and C++), this activates
optimizations based on the type of expressions. In particular, an object of one type is assumed never to reside at the same address as
an object of a different type, unless the types are almost the same. For example, an "unsigned int" can alias an "int", but not a
"void*" or a "double". A character type may alias any other type.

Pay special attention to code like this:

union a_union {
int i;
double d;
};

int f() {
union a_union t;
t.d = 3.0;
return t.i;
}

The practice of reading from a different union member than the one most recently written to (called "type-punning") is common. Even
with -fstrict-aliasing, type-punning is allowed, provided the memory is accessed through the union type. So, the code above works as
expected. However, this code might not:

int f() {
union a_union t;
int* ip;
t.d = 3.0;
ip = &t.i;
return *ip;
}

Similarly, access by taking the address, casting the resulting pointer and dereferencing the result has undefined behavior, even if the
cast uses a union type, e.g.:

int f() {
double d = 3.0;
return ((union a_union *) &d)->i;
}

The -fstrict-aliasing option is enabled at levels -O2, -O3, -Os.

-fstrict-overflow
Allow the compiler to assume strict signed overflow rules, depending on the language being compiled. For C (and C++) this means that
overflow when doing arithmetic with signed numbers is undefined, which means that the compiler may assume that it does not happen.
This permits various optimizations. For example, the compiler assumes that an expression like "i + 10 > i" is always true for signed
"i". This assumption is only valid if signed overflow is undefined, as the expression is false if "i + 10" overflows when using twos
complement arithmetic. When this option is in effect any attempt to determine whether an operation on signed numbers overflows must be
written carefully to not actually involve overflow.

This option also allows the compiler to assume strict pointer semantics: given a pointer to an object, if adding an offset to that
pointer does not produce a pointer to the same object, the addition is undefined. This permits the compiler to conclude that "p + u >
p" is always true for a pointer "p" and unsigned integer "u". This assumption is only valid because pointer wraparound is undefined,
as the expression is false if "p + u" overflows using twos complement arithmetic.

See also the -fwrapv option. Using -fwrapv means that integer signed overflow is fully defined: it wraps. When -fwrapv is used, there
is no difference between -fstrict-overflow and -fno-strict-overflow for integers. With -fwrapv certain types of overflow are
permitted. For example, if the compiler gets an overflow when doing arithmetic on constants, the overflowed value can still be used
with -fwrapv, but not otherwise.

The -fstrict-overflow option is enabled at levels -O2, -O3, -Os.

-falign-functions
-falign-functions=n
Align the start of functions to the next power-of-two greater than n, skipping up to n bytes. For instance, -falign-functions=32
aligns functions to the next 32-byte boundary, but -falign-functions=24 aligns to the next 32-byte boundary only if this can be done by
skipping 23 bytes or less.

-fno-align-functions and -falign-functions=1 are equivalent and mean that functions are not aligned.

Some assemblers only support this flag when n is a power of two; in that case, it is rounded up.

If n is not specified or is zero, use a machine-dependent default. The maximum allowed n option value is 65536.

Enabled at levels -O2, -O3.

-flimit-function-alignment
If this option is enabled, the compiler tries to avoid unnecessarily overaligning functions. It attempts to instruct the assembler to
align by the amount specified by -falign-functions, but not to skip more bytes than the size of the function.

-falign-labels
-falign-labels=n
Align all branch targets to a power-of-two boundary, skipping up to n bytes like -falign-functions. This option can easily make code
slower, because it must insert dummy operations for when the branch target is reached in the usual flow of the code.

-fno-align-labels and -falign-labels=1 are equivalent and mean that labels are not aligned.

If -falign-loops or -falign-jumps are applicable and are greater than this value, then their values are used instead.

If n is not specified or is zero, use a machine-dependent default which is very likely to be 1, meaning no alignment. The maximum
allowed n option value is 65536.

Enabled at levels -O2, -O3.

-falign-loops
-falign-loops=n
Align loops to a power-of-two boundary, skipping up to n bytes like -falign-functions. If the loops are executed many times, this
makes up for any execution of the dummy operations.

-fno-align-loops and -falign-loops=1 are equivalent and mean that loops are not aligned. The maximum allowed n option value is 65536.

If n is not specified or is zero, use a machine-dependent default.

Enabled at levels -O2, -O3.

-falign-jumps
-falign-jumps=n
Align branch targets to a power-of-two boundary, for branch targets where the targets can only be reached by jumping, skipping up to n
bytes like -falign-functions. In this case, no dummy operations need be executed.

-fno-align-jumps and -falign-jumps=1 are equivalent and mean that loops are not aligned.

If n is not specified or is zero, use a machine-dependent default. The maximum allowed n option value is 65536.

Enabled at levels -O2, -O3.

-funit-at-a-time
This option is left for compatibility reasons. -funit-at-a-time has no effect, while -fno-unit-at-a-time implies -fno-toplevel-reorder
and -fno-section-anchors.

Enabled by default.

-fno-toplevel-reorder
Do not reorder top-level functions, variables, and "asm" statements. Output them in the same order that they appear in the input file.
When this option is used, unreferenced static variables are not removed. This option is intended to support existing code that relies
on a particular ordering. For new code, it is better to use attributes when possible.

Enabled at level -O0. When disabled explicitly, it also implies -fno-section-anchors, which is otherwise enabled at -O0 on some
targets.

-fweb
Constructs webs as commonly used for register allocation purposes and assign each web individual pseudo register. This allows the
register allocation pass to operate on pseudos directly, but also strengthens several other optimization passes, such as CSE, loop
optimizer and trivial dead code remover. It can, however, make debugging impossible, since variables no longer stay in a "home
register".

Enabled by default with -funroll-loops.

-fwhole-program
Assume that the current compilation unit represents the whole program being compiled. All public functions and variables with the
exception of "main" and those merged by attribute "externally_visible" become static functions and in effect are optimized more
aggressively by interprocedural optimizers.

This option should not be used in combination with -flto. Instead relying on a linker plugin should provide safer and more precise
information.

-flto[=n]
This option runs the standard link-time optimizer. When invoked with source code, it generates GIMPLE (one of GCC's internal
representations) and writes it to special ELF sections in the object file. When the object files are linked together, all the function
bodies are read from these ELF sections and instantiated as if they had been part of the same translation unit.

To use the link-time optimizer, -flto and optimization options should be specified at compile time and during the final link. It is
recommended that you compile all the files participating in the same link with the same options and also specify those options at link
time. For example:

gcc -c -O2 -flto foo.c
gcc -c -O2 -flto bar.c
gcc -o myprog -flto -O2 foo.o bar.o

The first two invocations to GCC save a bytecode representation of GIMPLE into special ELF sections inside foo.o and bar.o. The final
invocation reads the GIMPLE bytecode from foo.o and bar.o, merges the two files into a single internal image, and compiles the result
as usual. Since both foo.o and bar.o are merged into a single image, this causes all the interprocedural analyses and optimizations in
GCC to work across the two files as if they were a single one. This means, for example, that the inliner is able to inline functions
in bar.o into functions in foo.o and vice-versa.

Another (simpler) way to enable link-time optimization is:

gcc -o myprog -flto -O2 foo.c bar.c

The above generates bytecode for foo.c and bar.c, merges them together into a single GIMPLE representation and optimizes them as usual
to produce myprog.

The only important thing to keep in mind is that to enable link-time optimizations you need to use the GCC driver to perform the link
step. GCC then automatically performs link-time optimization if any of the objects involved were compiled with the -flto command-line
option. You generally should specify the optimization options to be used for link-time optimization though GCC tries to be clever at
guessing an optimization level to use from the options used at compile time if you fail to specify one at link time. You can always
override the automatic decision to do link-time optimization by passing -fno-lto to the link command.

To make whole program optimization effective, it is necessary to make certain whole program assumptions. The compiler needs to know
what functions and variables can be accessed by libraries and runtime outside of the link-time optimized unit. When supported by the
linker, the linker plugin (see -fuse-linker-plugin) passes information to the compiler about used and externally visible symbols. When
the linker plugin is not available, -fwhole-program should be used to allow the compiler to make these assumptions, which leads to more
aggressive optimization decisions.

When -fuse-linker-plugin is not enabled, when a file is compiled with -flto, the generated object file is larger than a regular object
file because it contains GIMPLE bytecodes and the usual final code (see -ffat-lto-objects. This means that object files with LTO
information can be linked as normal object files; if -fno-lto is passed to the linker, no interprocedural optimizations are applied.
Note that when -fno-fat-lto-objects is enabled the compile stage is faster but you cannot perform a regular, non-LTO link on them.

Additionally, the optimization flags used to compile individual files are not necessarily related to those used at link time. For
instance,

gcc -c -O0 -ffat-lto-objects -flto foo.c
gcc -c -O0 -ffat-lto-objects -flto bar.c
gcc -o myprog -O3 foo.o bar.o

This produces individual object files with unoptimized assembler code, but the resulting binary myprog is optimized at -O3. If,
instead, the final binary is generated with -fno-lto, then myprog is not optimized.

When producing the final binary, GCC only applies link-time optimizations to those files that contain bytecode. Therefore, you can mix
and match object files and libraries with GIMPLE bytecodes and final object code. GCC automatically selects which files to optimize in
LTO mode and which files to link without further processing.

There are some code generation flags preserved by GCC when generating bytecodes, as they need to be used during the final link stage.
Generally options specified at link time override those specified at compile time.

If you do not specify an optimization level option -O at link time, then GCC uses the highest optimization level used when compiling
the object files.

Currently, the following options and their settings are taken from the first object file that explicitly specifies them: -fPIC, -fpic,
-fpie, -fcommon, -fexceptions, -fnon-call-exceptions, -fgnu-tm and all the -m target flags.

Certain ABI-changing flags are required to match in all compilation units, and trying to override this at link time with a conflicting
value is ignored. This includes options such as -freg-struct-return and -fpcc-struct-return.

Other options such as -ffp-contract, -fno-strict-overflow, -fwrapv, -fno-trapv or -fno-strict-aliasing are passed through to the link
stage and merged conservatively for conflicting translation units. Specifically -fno-strict-overflow, -fwrapv and -fno-trapv take
precedence; and for example -ffp-contract=off takes precedence over -ffp-contract=fast. You can override them at link time.

If LTO encounters objects with C linkage declared with incompatible types in separate translation units to be linked together
(undefined behavior according to ISO C99 6.2.7), a non-fatal diagnostic may be issued. The behavior is still undefined at run time.
Similar diagnostics may be raised for other languages.

Another feature of LTO is that it is possible to apply interprocedural optimizations on files written in different languages:

gcc -c -flto foo.c
g++ -c -flto bar.cc
gfortran -c -flto baz.f90
g++ -o myprog -flto -O3 foo.o bar.o baz.o -lgfortran

Notice that the final link is done with g++ to get the C++ runtime libraries and -lgfortran is added to get the Fortran runtime
libraries. In general, when mixing languages in LTO mode, you should use the same link command options as when mixing languages in a
regular (non-LTO) compilation.

If object files containing GIMPLE bytecode are stored in a library archive, say libfoo.a, it is possible to extract and use them in an
LTO link if you are using a linker with plugin support. To create static libraries suitable for LTO, use gcc-ar and gcc-ranlib instead
of ar and ranlib; to show the symbols of object files with GIMPLE bytecode, use gcc-nm. Those commands require that ar, ranlib and nm
have been compiled with plugin support. At link time, use the the flag -fuse-linker-plugin to ensure that the library participates in
the LTO optimization process:

gcc -o myprog -O2 -flto -fuse-linker-plugin a.o b.o -lfoo

With the linker plugin enabled, the linker extracts the needed GIMPLE files from libfoo.a and passes them on to the running GCC to make
them part of the aggregated GIMPLE image to be optimized.

If you are not using a linker with plugin support and/or do not enable the linker plugin, then the objects inside libfoo.a are
extracted and linked as usual, but they do not participate in the LTO optimization process. In order to make a static library suitable
for both LTO optimization and usual linkage, compile its object files with -flto -ffat-lto-objects.

Link-time optimizations do not require the presence of the whole program to operate. If the program does not require any symbols to be
exported, it is possible to combine -flto and -fwhole-program to allow the interprocedural optimizers to use more aggressive
assumptions which may lead to improved optimization opportunities. Use of -fwhole-program is not needed when linker plugin is active
(see -fuse-linker-plugin).

The current implementation of LTO makes no attempt to generate bytecode that is portable between different types of hosts. The
bytecode files are versioned and there is a strict version check, so bytecode files generated in one version of GCC do not work with an
older or newer version of GCC.

Link-time optimization does not work well with generation of debugging information. Combining -flto with -g is currently experimental
and expected to produce unexpected results.

If you specify the optional n, the optimization and code generation done at link time is executed in parallel using n parallel jobs by
utilizing an installed make program. The environment variable MAKE may be used to override the program used. The default value for n
is 1.

You can also specify -flto=jobserver to use GNU make's job server mode to determine the number of parallel jobs. This is useful when
the Makefile calling GCC is already executing in parallel. You must prepend a + to the command recipe in the parent Makefile for this
to work. This option likely only works if MAKE is GNU make.

-flto-partition=alg
Specify the partitioning algorithm used by the link-time optimizer. The value is either 1to1 to specify a partitioning mirroring the
original source files or balanced to specify partitioning into equally sized chunks (whenever possible) or max to create new partition
for every symbol where possible. Specifying none as an algorithm disables partitioning and streaming completely. The default value is
balanced. While 1to1 can be used as an workaround for various code ordering issues, the max partitioning is intended for internal
testing only. The value one specifies that exactly one partition should be used while the value none bypasses partitioning and
executes the link-time optimization step directly from the WPA phase.

-flto-odr-type-merging
Enable streaming of mangled types names of C++ types and their unification at link time. This increases size of LTO object files, but
enables diagnostics about One Definition Rule violations.

-flto-compression-level=n
This option specifies the level of compression used for intermediate language written to LTO object files, and is only meaningful in
conjunction with LTO mode (-flto). Valid values are 0 (no compression) to 9 (maximum compression). Values outside this range are
clamped to either 0 or 9. If the option is not given, a default balanced compression setting is used.

-fuse-linker-plugin
Enables the use of a linker plugin during link-time optimization. This option relies on plugin support in the linker, which is
available in gold or in GNU ld 2.21 or newer.

This option enables the extraction of object files with GIMPLE bytecode out of library archives. This improves the quality of
optimization by exposing more code to the link-time optimizer. This information specifies what symbols can be accessed externally (by
non-LTO object or during dynamic linking). Resulting code quality improvements on binaries (and shared libraries that use hidden
visibility) are similar to -fwhole-program. See -flto for a description of the effect of this flag and how to use it.

This option is enabled by default when LTO support in GCC is enabled and GCC was configured for use with a linker supporting plugins
(GNU ld 2.21 or newer or gold).

-ffat-lto-objects
Fat LTO objects are object files that contain both the intermediate language and the object code. This makes them usable for both LTO
linking and normal linking. This option is effective only when compiling with -flto and is ignored at link time.

-fno-fat-lto-objects improves compilation time over plain LTO, but requires the complete toolchain to be aware of LTO. It requires a
linker with linker plugin support for basic functionality. Additionally, nm, ar and ranlib need to support linker plugins to allow a
full-featured build environment (capable of building static libraries etc). GCC provides the gcc-ar, gcc-nm, gcc-ranlib wrappers to
pass the right options to these tools. With non fat LTO makefiles need to be modified to use them.

The default is -fno-fat-lto-objects on targets with linker plugin support.

-fcompare-elim
After register allocation and post-register allocation instruction splitting, identify arithmetic instructions that compute processor
flags similar to a comparison operation based on that arithmetic. If possible, eliminate the explicit comparison operation.

This pass only applies to certain targets that cannot explicitly represent the comparison operation before register allocation is
complete.

Enabled at levels -O, -O2, -O3, -Os.

-fcprop-registers
After register allocation and post-register allocation instruction splitting, perform a copy-propagation pass to try to reduce
scheduling dependencies and occasionally eliminate the copy.

Enabled at levels -O, -O2, -O3, -Os.

-fprofile-correction
Profiles collected using an instrumented binary for multi-threaded programs may be inconsistent due to missed counter updates. When
this option is specified, GCC uses heuristics to correct or smooth out such inconsistencies. By default, GCC emits an error message
when an inconsistent profile is detected.

-fprofile-use
-fprofile-use=path
Enable profile feedback-directed optimizations, and the following optimizations which are generally profitable only with profile
feedback available: -fbranch-probabilities, -fvpt, -funroll-loops, -fpeel-loops, -ftracer, -ftree-vectorize, and ftree-loop-distribute-
patterns.

Before you can use this option, you must first generate profiling information.

By default, GCC emits an error message if the feedback profiles do not match the source code. This error can be turned into a warning
by using -Wcoverage-mismatch. Note this may result in poorly optimized code.

If path is specified, GCC looks at the path to find the profile feedback data files. See -fprofile-dir.

-fauto-profile
-fauto-profile=path
Enable sampling-based feedback-directed optimizations, and the following optimizations which are generally profitable only with profile
feedback available: -fbranch-probabilities, -fvpt, -funroll-loops, -fpeel-loops, -ftracer, -ftree-vectorize, -finline-functions,
-fipa-cp, -fipa-cp-clone, -fpredictive-commoning, -funswitch-loops, -fgcse-after-reload, and -ftree-loop-distribute-patterns.

path is the name of a file containing AutoFDO profile information. If omitted, it defaults to fbdata.afdo in the current directory.

Producing an AutoFDO profile data file requires running your program with the perf utility on a supported GNU/Linux target system. For
more information, see <https://perf.wiki.kernel.org/>.

E.g.

perf record -e br_inst_retired:near_taken -b -o perf.data
-- your_program

Then use the create_gcov tool to convert the raw profile data to a format that can be used by GCC. You must also supply the unstripped
binary for your program to this tool. See <https://github.com/google/autofdo>.

E.g.

create_gcov --binary=your_program.unstripped --profile=perf.data
--gcov=profile.afdo

The following options control compiler behavior regarding floating-point arithmetic. These options trade off between speed and
correctness. All must be specifically enabled.

-ffloat-store
Do not store floating-point variables in registers, and inhibit other options that might change whether a floating-point value is taken
from a register or memory.

This option prevents undesirable excess precision on machines such as the 68000 where the floating registers (of the 68881) keep more
precision than a "double" is supposed to have. Similarly for the x86 architecture. For most programs, the excess precision does only
good, but a few programs rely on the precise definition of IEEE floating point. Use -ffloat-store for such programs, after modifying
them to store all pertinent intermediate computations into variables.

-fexcess-precision=style
This option allows further control over excess precision on machines where floating-point operations occur in a format with more
precision or range than the IEEE standard and interchange floating-point types. By default, -fexcess-precision=fast is in effect; this
means that operations may be carried out in a wider precision than the types specified in the source if that would result in faster
code, and it is unpredictable when rounding to the types specified in the source code takes place. When compiling C, if
-fexcess-precision=standard is specified then excess precision follows the rules specified in ISO C99; in particular, both casts and
assignments cause values to be rounded to their semantic types (whereas -ffloat-store only affects assignments). This option is
enabled by default for C if a strict conformance option such as -std=c99 is used. -ffast-math enables -fexcess-precision=fast by
default regardless of whether a strict conformance option is used.

-fexcess-precision=standard is not implemented for languages other than C. On the x86, it has no effect if -mfpmath=sse or
-mfpmath=sse+387 is specified; in the former case, IEEE semantics apply without excess precision, and in the latter, rounding is
unpredictable.

-ffast-math
Sets the options -fno-math-errno, -funsafe-math-optimizations, -ffinite-math-only, -fno-rounding-math, -fno-signaling-nans,
-fcx-limited-range and -fexcess-precision=fast.

This option causes the preprocessor macro "__FAST_MATH__" to be defined.

This option is not turned on by any -O option besides -Ofast since it can result in incorrect output for programs that depend on an
exact implementation of IEEE or ISO rules/specifications for math functions. It may, however, yield faster code for programs that do
not require the guarantees of these specifications.

-fno-math-errno
Do not set "errno" after calling math functions that are executed with a single instruction, e.g., "sqrt". A program that relies on
IEEE exceptions for math error handling may want to use this flag for speed while maintaining IEEE arithmetic compatibility.

This option is not turned on by any -O option since it can result in incorrect output for programs that depend on an exact
implementation of IEEE or ISO rules/specifications for math functions. It may, however, yield faster code for programs that do not
require the guarantees of these specifications.

The default is -fmath-errno.

On Darwin systems, the math library never sets "errno". There is therefore no reason for the compiler to consider the possibility that
it might, and -fno-math-errno is the default.

-funsafe-math-optimizations
Allow optimizations for floating-point arithmetic that (a) assume that arguments and results are valid and (b) may violate IEEE or ANSI
standards. When used at link time, it may include libraries or startup files that change the default FPU control word or other similar
optimizations.

The default is -fno-unsafe-math-optimizations.

-fassociative-math
Allow re-association of operands in series of floating-point operations. This violates the ISO C and C++ language standard by possibly
changing computation result. NOTE: re-ordering may change the sign of zero as well as ignore NaNs and inhibit or create underflow or
overflow (and thus cannot be used on code that relies on rounding behavior like "(x + 2**52) - 2**52". May also reorder floating-point
comparisons and thus may not be used when ordered comparisons are required. This option requires that both -fno-signed-zeros and
-fno-trapping-math be in effect. Moreover, it doesn't make much sense with -frounding-math. For Fortran the option is automatically
enabled when both -fno-signed-zeros and -fno-trapping-math are in effect.

The default is -fno-associative-math.

-freciprocal-math
Allow the reciprocal of a value to be used instead of dividing by the value if this enables optimizations. For example "x / y" can be
replaced with "x * (1/y)", which is useful if "(1/y)" is subject to common subexpression elimination. Note that this loses precision
and increases the number of flops operating on the value.

The default is -fno-reciprocal-math.

-ffinite-math-only
Allow optimizations for floating-point arithmetic that assume that arguments and results are not NaNs or +-Infs.

The default is -fno-finite-math-only.

-fno-signed-zeros
Allow optimizations for floating-point arithmetic that ignore the signedness of zero. IEEE arithmetic specifies the behavior of
distinct +0.0 and -0.0 values, which then prohibits simplification of expressions such as x+0.0 or 0.0*x (even with
-ffinite-math-only). This option implies that the sign of a zero result isn't significant.

The default is -fsigned-zeros.

-fno-trapping-math
Compile code assuming that floating-point operations cannot generate user-visible traps. These traps include division by zero,
overflow, underflow, inexact result and invalid operation. This option requires that -fno-signaling-nans be in effect. Setting this
option may allow faster code if one relies on "non-stop" IEEE arithmetic, for example.

This option should never be turned on by any -O option since it can result in incorrect output for programs that depend on an exact
implementation of IEEE or ISO rules/specifications for math functions.

The default is -ftrapping-math.

-frounding-math
Disable transformations and optimizations that assume default floating-point rounding behavior. This is round-to-zero for all floating
point to integer conversions, and round-to-nearest for all other arithmetic truncations. This option should be specified for programs
that change the FP rounding mode dynamically, or that may be executed with a non-default rounding mode. This option disables constant
folding of floating-point expressions at compile time (which may be affected by rounding mode) and arithmetic transformations that are
unsafe in the presence of sign-dependent rounding modes.

The default is -fno-rounding-math.

This option is experimental and does not currently guarantee to disable all GCC optimizations that are affected by rounding mode.
Future versions of GCC may provide finer control of this setting using C99's "FENV_ACCESS" pragma. This command-line option will be
used to specify the default state for "FENV_ACCESS".

-fsignaling-nans
Compile code assuming that IEEE signaling NaNs may generate user-visible traps during floating-point operations. Setting this option
disables optimizations that may change the number of exceptions visible with signaling NaNs. This option implies -ftrapping-math.

This option causes the preprocessor macro "__SUPPORT_SNAN__" to be defined.

The default is -fno-signaling-nans.

This option is experimental and does not currently guarantee to disable all GCC optimizations that affect signaling NaN behavior.

-fno-fp-int-builtin-inexact
Do not allow the built-in functions "ceil", "floor", "round" and "trunc", and their "float" and "long double" variants, to generate
code that raises the "inexact" floating-point exception for noninteger arguments. ISO C99 and C11 allow these functions to raise the
"inexact" exception, but ISO/IEC TS 18661-1:2014, the C bindings to IEEE 754-2008, does not allow these functions to do so.

The default is -ffp-int-builtin-inexact, allowing the exception to be raised. This option does nothing unless -ftrapping-math is in
effect.

Even if -fno-fp-int-builtin-inexact is used, if the functions generate a call to a library function then the "inexact" exception may be
raised if the library implementation does not follow TS 18661.

-fsingle-precision-constant
Treat floating-point constants as single precision instead of implicitly converting them to double-precision constants.

-fcx-limited-range
When enabled, this option states that a range reduction step is not needed when performing complex division. Also, there is no
checking whether the result of a complex multiplication or division is "NaN + I*NaN", with an attempt to rescue the situation in that
case. The default is -fno-cx-limited-range, but is enabled by -ffast-math.

This option controls the default setting of the ISO C99 "CX_LIMITED_RANGE" pragma. Nevertheless, the option applies to all languages.

-fcx-fortran-rules
Complex multiplication and division follow Fortran rules. Range reduction is done as part of complex division, but there is no
checking whether the result of a complex multiplication or division is "NaN + I*NaN", with an attempt to rescue the situation in that
case.

The default is -fno-cx-fortran-rules.

The following options control optimizations that may improve performance, but are not enabled by any -O options. This section includes
experimental options that may produce broken code.

-fbranch-probabilities
After running a program compiled with -fprofile-arcs, you can compile it a second time using -fbranch-probabilities, to improve
optimizations based on the number of times each branch was taken. When a program compiled with -fprofile-arcs exits, it saves arc
execution counts to a file called sourcename.gcda for each source file. The information in this data file is very dependent on the
structure of the generated code, so you must use the same source code and the same optimization options for both compilations.

With -fbranch-probabilities, GCC puts a REG_BR_PROB note on each JUMP_INSN and CALL_INSN. These can be used to improve optimization.
Currently, they are only used in one place: in reorg.c, instead of guessing which path a branch is most likely to take, the REG_BR_PROB
values are used to exactly determine which path is taken more often.

-fprofile-values
If combined with -fprofile-arcs, it adds code so that some data about values of expressions in the program is gathered.

With -fbranch-probabilities, it reads back the data gathered from profiling values of expressions for usage in optimizations.

Enabled with -fprofile-generate and -fprofile-use.

-fprofile-reorder-functions
Function reordering based on profile instrumentation collects first time of execution of a function and orders these functions in
ascending order.

Enabled with -fprofile-use.

-fvpt
If combined with -fprofile-arcs, this option instructs the compiler to add code to gather information about values of expressions.

With -fbranch-probabilities, it reads back the data gathered and actually performs the optimizations based on them. Currently the
optimizations include specialization of division operations using the knowledge about the value of the denominator.

-frename-registers
Attempt to avoid false dependencies in scheduled code by making use of registers left over after register allocation. This
optimization most benefits processors with lots of registers. Depending on the debug information format adopted by the target,
however, it can make debugging impossible, since variables no longer stay in a "home register".

Enabled by default with -funroll-loops.

-fschedule-fusion
Performs a target dependent pass over the instruction stream to schedule instructions of same type together because target machine can
execute them more efficiently if they are adjacent to each other in the instruction flow.

Enabled at levels -O2, -O3, -Os.

-ftracer
Perform tail duplication to enlarge superblock size. This transformation simplifies the control flow of the function allowing other
optimizations to do a better job.

Enabled with -fprofile-use.

-funroll-loops
Unroll loops whose number of iterations can be determined at compile time or upon entry to the loop. -funroll-loops implies
-frerun-cse-after-loop, -fweb and -frename-registers. It also turns on complete loop peeling (i.e. complete removal of loops with a
small constant number of iterations). This option makes code larger, and may or may not make it run faster.

Enabled with -fprofile-use.

-funroll-all-loops
Unroll all loops, even if their number of iterations is uncertain when the loop is entered. This usually makes programs run more
slowly. -funroll-all-loops implies the same options as -funroll-loops.

-fpeel-loops
Peels loops for which there is enough information that they do not roll much (from profile feedback or static analysis). It also turns
on complete loop peeling (i.e. complete removal of loops with small constant number of iterations).

Enabled with -O3 and/or -fprofile-use.

-fmove-loop-invariants
Enables the loop invariant motion pass in the RTL loop optimizer. Enabled at level -O1

-fsplit-loops
Split a loop into two if it contains a condition that's always true for one side of the iteration space and false for the other.

-funswitch-loops
Move branches with loop invariant conditions out of the loop, with duplicates of the loop on both branches (modified according to
result of the condition).

-ffunction-sections
-fdata-sections
Place each function or data item into its own section in the output file if the target supports arbitrary sections. The name of the
function or the name of the data item determines the section's name in the output file.

Use these options on systems where the linker can perform optimizations to improve locality of reference in the instruction space.
Most systems using the ELF object format and SPARC processors running Solaris 2 have linkers with such optimizations. AIX may have
these optimizations in the future.

Only use these options when there are significant benefits from doing so. When you specify these options, the assembler and linker
create larger object and executable files and are also slower. You cannot use gprof on all systems if you specify this option, and you
may have problems with debugging if you specify both this option and -g.

-fbranch-target-load-optimize
Perform branch target register load optimization before prologue / epilogue threading. The use of target registers can typically be
exposed only during reload, thus hoisting loads out of loops and doing inter-block scheduling needs a separate optimization pass.

-fbranch-target-load-optimize2
Perform branch target register load optimization after prologue / epilogue threading.

-fbtr-bb-exclusive
When performing branch target register load optimization, don't reuse branch target registers within any basic block.

-fstdarg-opt
Optimize the prologue of variadic argument functions with respect to usage of those arguments.

NOTE: In Ubuntu 14.10 and later versions, -fstack-protector-strong is enabled by default for C, C++, ObjC, ObjC++, if none of
-fno-stack-protector, -nostdlib, nor -ffreestanding are found.

-fsection-anchors
Try to reduce the number of symbolic address calculations by using shared "anchor" symbols to address nearby objects. This
transformation can help to reduce the number of GOT entries and GOT accesses on some targets.

For example, the implementation of the following function "foo":

static int a, b, c;
int foo (void) { return a + b + c; }

usually calculates the addresses of all three variables, but if you compile it with -fsection-anchors, it accesses the variables from a
common anchor point instead. The effect is similar to the following pseudocode (which isn't valid C):

int foo (void)
{
register int *xr = &x;
return xr[&a - &x] + xr[&b - &x] + xr[&c - &x];
}

Not all targets support this option.

--param name=value
In some places, GCC uses various constants to control the amount of optimization that is done. For example, GCC does not inline
functions that contain more than a certain number of instructions. You can control some of these constants on the command line using
the --param option.

The names of specific parameters, and the meaning of the values, are tied to the internals of the compiler, and are subject to change
without notice in future releases.

In each case, the value is an integer. The allowable choices for name are:

predictable-branch-outcome
When branch is predicted to be taken with probability lower than this threshold (in percent), then it is considered well
predictable. The default is 10.

max-rtl-if-conversion-insns
RTL if-conversion tries to remove conditional branches around a block and replace them with conditionally executed instructions.
This parameter gives the maximum number of instructions in a block which should be considered for if-conversion. The default is
10, though the compiler will also use other heuristics to decide whether if-conversion is likely to be profitable.

max-rtl-if-conversion-predictable-cost
max-rtl-if-conversion-unpredictable-cost
RTL if-conversion will try to remove conditional branches around a block and replace them with conditionally executed instructions.
These parameters give the maximum permissible cost for the sequence that would be generated by if-conversion depending on whether
the branch is statically determined to be predictable or not. The units for this parameter are the same as those for the GCC
internal seq_cost metric. The compiler will try to provide a reasonable default for this parameter using the BRANCH_COST target
macro.

max-crossjump-edges
The maximum number of incoming edges to consider for cross-jumping. The algorithm used by -fcrossjumping is O(N^2) in the number
of edges incoming to each block. Increasing values mean more aggressive optimization, making the compilation time increase with
probably small improvement in executable size.

min-crossjump-insns
The minimum number of instructions that must be matched at the end of two blocks before cross-jumping is performed on them. This
value is ignored in the case where all instructions in the block being cross-jumped from are matched. The default value is 5.

max-grow-copy-bb-insns
The maximum code size expansion factor when copying basic blocks instead of jumping. The expansion is relative to a jump
instruction. The default value is 8.

max-goto-duplication-insns
The maximum number of instructions to duplicate to a block that jumps to a computed goto. To avoid O(N^2) behavior in a number of
passes, GCC factors computed gotos early in the compilation process, and unfactors them as late as possible. Only computed jumps
at the end of a basic blocks with no more than max-goto-duplication-insns are unfactored. The default value is 8.

max-delay-slot-insn-search
The maximum number of instructions to consider when looking for an instruction to fill a delay slot. If more than this arbitrary
number of instructions are searched, the time savings from filling the delay slot are minimal, so stop searching. Increasing
values mean more aggressive optimization, making the compilation time increase with probably small improvement in execution time.

max-delay-slot-live-search
When trying to fill delay slots, the maximum number of instructions to consider when searching for a block with valid live register
information. Increasing this arbitrarily chosen value means more aggressive optimization, increasing the compilation time. This
parameter should be removed when the delay slot code is rewritten to maintain the control-flow graph.

max-gcse-memory
The approximate maximum amount of memory that can be allocated in order to perform the global common subexpression elimination
optimization. If more memory than specified is required, the optimization is not done.

max-gcse-insertion-ratio
If the ratio of expression insertions to deletions is larger than this value for any expression, then RTL PRE inserts or removes
the expression and thus leaves partially redundant computations in the instruction stream. The default value is 20.

max-pending-list-length
The maximum number of pending dependencies scheduling allows before flushing the current state and starting over. Large functions
with few branches or calls can create excessively large lists which needlessly consume memory and resources.

max-modulo-backtrack-attempts
The maximum number of backtrack attempts the scheduler should make when modulo scheduling a loop. Larger values can exponentially
increase compilation time.

max-inline-insns-single
Several parameters control the tree inliner used in GCC. This number sets the maximum number of instructions (counted in GCC's
internal representation) in a single function that the tree inliner considers for inlining. This only affects functions declared
inline and methods implemented in a class declaration (C++). The default value is 400.

max-inline-insns-auto
When you use -finline-functions (included in -O3), a lot of functions that would otherwise not be considered for inlining by the
compiler are investigated. To those functions, a different (more restrictive) limit compared to functions declared inline can be
applied. The default value is 40.

inline-min-speedup
When estimated performance improvement of caller + callee runtime exceeds this threshold (in percent), the function can be inlined
regardless of the limit on --param max-inline-insns-single and --param max-inline-insns-auto.

large-function-insns
The limit specifying really large functions. For functions larger than this limit after inlining, inlining is constrained by
--param large-function-growth. This parameter is useful primarily to avoid extreme compilation time caused by non-linear
algorithms used by the back end. The default value is 2700.

large-function-growth
Specifies maximal growth of large function caused by inlining in percents. The default value is 100 which limits large function
growth to 2.0 times the original size.

large-unit-insns
The limit specifying large translation unit. Growth caused by inlining of units larger than this limit is limited by --param
inline-unit-growth. For small units this might be too tight. For example, consider a unit consisting of function A that is inline
and B that just calls A three times. If B is small relative to A, the growth of unit is 300\% and yet such inlining is very sane.
For very large units consisting of small inlineable functions, however, the overall unit growth limit is needed to avoid
exponential explosion of code size. Thus for smaller units, the size is increased to --param large-unit-insns before applying
--param inline-unit-growth. The default is 10000.

inline-unit-growth
Specifies maximal overall growth of the compilation unit caused by inlining. The default value is 20 which limits unit growth to
1.2 times the original size. Cold functions (either marked cold via an attribute or by profile feedback) are not accounted into the
unit size.

ipcp-unit-growth
Specifies maximal overall growth of the compilation unit caused by interprocedural constant propagation. The default value is 10
which limits unit growth to 1.1 times the original size.

large-stack-frame
The limit specifying large stack frames. While inlining the algorithm is trying to not grow past this limit too much. The default
value is 256 bytes.

large-stack-frame-growth
Specifies maximal growth of large stack frames caused by inlining in percents. The default value is 1000 which limits large stack
frame growth to 11 times the original size.

max-inline-insns-recursive
max-inline-insns-recursive-auto
Specifies the maximum number of instructions an out-of-line copy of a self-recursive inline function can grow into by performing
recursive inlining.

--param max-inline-insns-recursive applies to functions declared inline. For functions not declared inline, recursive inlining
happens only when -finline-functions (included in -O3) is enabled; --param max-inline-insns-recursive-auto applies instead. The
default value is 450.

max-inline-recursive-depth
max-inline-recursive-depth-auto
Specifies the maximum recursion depth used for recursive inlining.

--param max-inline-recursive-depth applies to functions declared inline. For functions not declared inline, recursive inlining
happens only when -finline-functions (included in -O3) is enabled; --param max-inline-recursive-depth-auto applies instead. The
default value is 8.

min-inline-recursive-probability
Recursive inlining is profitable only for function having deep recursion in average and can hurt for function having little
recursion depth by increasing the prologue size or complexity of function body to other optimizers.

When profile feedback is available (see -fprofile-generate) the actual recursion depth can be guessed from the probability that
function recurses via a given call expression. This parameter limits inlining only to call expressions whose probability exceeds
the given threshold (in percents). The default value is 10.

early-inlining-insns
Specify growth that the early inliner can make. In effect it increases the amount of inlining for code having a large abstraction
penalty. The default value is 14.

max-early-inliner-iterations
Limit of iterations of the early inliner. This basically bounds the number of nested indirect calls the early inliner can resolve.
Deeper chains are still handled by late inlining.

comdat-sharing-probability
Probability (in percent) that C++ inline function with comdat visibility are shared across multiple compilation units. The default
value is 20.

profile-func-internal-id
A parameter to control whether to use function internal id in profile database lookup. If the value is 0, the compiler uses an id
that is based on function assembler name and filename, which makes old profile data more tolerant to source changes such as
function reordering etc. The default value is 0.

min-vect-loop-bound
The minimum number of iterations under which loops are not vectorized when -ftree-vectorize is used. The number of iterations
after vectorization needs to be greater than the value specified by this option to allow vectorization. The default value is 0.

gcse-cost-distance-ratio
Scaling factor in calculation of maximum distance an expression can be moved by GCSE optimizations. This is currently supported
only in the code hoisting pass. The bigger the ratio, the more aggressive code hoisting is with simple expressions, i.e., the
expressions that have cost less than gcse-unrestricted-cost. Specifying 0 disables hoisting of simple expressions. The default
value is 10.

gcse-unrestricted-cost
Cost, roughly measured as the cost of a single typical machine instruction, at which GCSE optimizations do not constrain the
distance an expression can travel. This is currently supported only in the code hoisting pass. The lesser the cost, the more
aggressive code hoisting is. Specifying 0 allows all expressions to travel unrestricted distances. The default value is 3.

max-hoist-depth
The depth of search in the dominator tree for expressions to hoist. This is used to avoid quadratic behavior in hoisting
algorithm. The value of 0 does not limit on the search, but may slow down compilation of huge functions. The default value is 30.

max-tail-merge-comparisons
The maximum amount of similar bbs to compare a bb with. This is used to avoid quadratic behavior in tree tail merging. The
default value is 10.

max-tail-merge-iterations
The maximum amount of iterations of the pass over the function. This is used to limit compilation time in tree tail merging. The
default value is 2.

store-merging-allow-unaligned
Allow the store merging pass to introduce unaligned stores if it is legal to do so. The default value is 1.

max-stores-to-merge
The maximum number of stores to attempt to merge into wider stores in the store merging pass. The minimum value is 2 and the
default is 64.

max-unrolled-insns
The maximum number of instructions that a loop may have to be unrolled. If a loop is unrolled, this parameter also determines how
many times the loop code is unrolled.

max-average-unrolled-insns
The maximum number of instructions biased by probabilities of their execution that a loop may have to be unrolled. If a loop is
unrolled, this parameter also determines how many times the loop code is unrolled.

max-unroll-times
The maximum number of unrollings of a single loop.

max-peeled-insns
The maximum number of instructions that a loop may have to be peeled. If a loop is peeled, this parameter also determines how many
times the loop code is peeled.

max-peel-times
The maximum number of peelings of a single loop.

max-peel-branches
The maximum number of branches on the hot path through the peeled sequence.

max-completely-peeled-insns
The maximum number of insns of a completely peeled loop.

max-completely-peel-times
The maximum number of iterations of a loop to be suitable for complete peeling.

max-completely-peel-loop-nest-depth
The maximum depth of a loop nest suitable for complete peeling.

max-unswitch-insns
The maximum number of insns of an unswitched loop.

max-unswitch-level
The maximum number of branches unswitched in a single loop.

max-loop-headers-insns
The maximum number of insns in loop header duplicated by the copy loop headers pass.

lim-expensive
The minimum cost of an expensive expression in the loop invariant motion.

iv-consider-all-candidates-bound
Bound on number of candidates for induction variables, below which all candidates are considered for each use in induction variable
optimizations. If there are more candidates than this, only the most relevant ones are considered to avoid quadratic time
complexity.

iv-max-considered-uses
The induction variable optimizations give up on loops that contain more induction variable uses.

iv-always-prune-cand-set-bound
If the number of candidates in the set is smaller than this value, always try to remove unnecessary ivs from the set when adding a
new one.

avg-loop-niter
Average number of iterations of a loop.

dse-max-object-size
Maximum size (in bytes) of objects tracked bytewise by dead store elimination. Larger values may result in larger compilation
times.

scev-max-expr-size
Bound on size of expressions used in the scalar evolutions analyzer. Large expressions slow the analyzer.

scev-max-expr-complexity
Bound on the complexity of the expressions in the scalar evolutions analyzer. Complex expressions slow the analyzer.

max-tree-if-conversion-phi-args
Maximum number of arguments in a PHI supported by TREE if conversion unless the loop is marked with simd pragma.

vect-max-version-for-alignment-checks
The maximum number of run-time checks that can be performed when doing loop versioning for alignment in the vectorizer.

vect-max-version-for-alias-checks
The maximum number of run-time checks that can be performed when doing loop versioning for alias in the vectorizer.

vect-max-peeling-for-alignment
The maximum number of loop peels to enhance access alignment for vectorizer. Value -1 means no limit.

max-iterations-to-track
The maximum number of iterations of a loop the brute-force algorithm for analysis of the number of iterations of the loop tries to
evaluate.

hot-bb-count-ws-permille
A basic block profile count is considered hot if it contributes to the given permillage (i.e. 0...1000) of the entire profiled
execution.

hot-bb-frequency-fraction
Select fraction of the entry block frequency of executions of basic block in function given basic block needs to have to be
considered hot.

max-predicted-iterations
The maximum number of loop iterations we predict statically. This is useful in cases where a function contains a single loop with
known bound and another loop with unknown bound. The known number of iterations is predicted correctly, while the unknown number
of iterations average to roughly 10. This means that the loop without bounds appears artificially cold relative to the other one.

builtin-expect-probability
Control the probability of the expression having the specified value. This parameter takes a percentage (i.e. 0 ... 100) as input.
The default probability of 90 is obtained empirically.

align-threshold
Select fraction of the maximal frequency of executions of a basic block in a function to align the basic block.

align-loop-iterations
A loop expected to iterate at least the selected number of iterations is aligned.

tracer-dynamic-coverage
tracer-dynamic-coverage-feedback
This value is used to limit superblock formation once the given percentage of executed instructions is covered. This limits
unnecessary code size expansion.

The tracer-dynamic-coverage-feedback parameter is used only when profile feedback is available. The real profiles (as opposed to
statically estimated ones) are much less balanced allowing the threshold to be larger value.

tracer-max-code-growth
Stop tail duplication once code growth has reached given percentage. This is a rather artificial limit, as most of the duplicates
are eliminated later in cross jumping, so it may be set to much higher values than is the desired code growth.

tracer-min-branch-ratio
Stop reverse growth when the reverse probability of best edge is less than this threshold (in percent).

tracer-min-branch-probability
tracer-min-branch-probability-feedback
Stop forward growth if the best edge has probability lower than this threshold.

Similarly to tracer-dynamic-coverage two parameters are provided. tracer-min-branch-probability-feedback is used for compilation
with profile feedback and tracer-min-branch-probability compilation without. The value for compilation with profile feedback needs
to be more conservative (higher) in order to make tracer effective.

max-cse-path-length
The maximum number of basic blocks on path that CSE considers. The default is 10.

max-cse-insns
The maximum number of instructions CSE processes before flushing. The default is 1000.

ggc-min-expand
GCC uses a garbage collector to manage its own memory allocation. This parameter specifies the minimum percentage by which the
garbage collector's heap should be allowed to expand between collections. Tuning this may improve compilation speed; it has no
effect on code generation.

The default is 30% + 70% * (RAM/1GB) with an upper bound of 100% when RAM >= 1GB. If "getrlimit" is available, the notion of "RAM"
is the smallest of actual RAM and "RLIMIT_DATA" or "RLIMIT_AS". If GCC is not able to calculate RAM on a particular platform, the
lower bound of 30% is used. Setting this parameter and ggc-min-heapsize to zero causes a full collection to occur at every
opportunity. This is extremely slow, but can be useful for debugging.

ggc-min-heapsize
Minimum size of the garbage collector's heap before it begins bothering to collect garbage. The first collection occurs after the
heap expands by ggc-min-expand% beyond ggc-min-heapsize. Again, tuning this may improve compilation speed, and has no effect on
code generation.

The default is the smaller of RAM/8, RLIMIT_RSS, or a limit that tries to ensure that RLIMIT_DATA or RLIMIT_AS are not exceeded,
but with a lower bound of 4096 (four megabytes) and an upper bound of 131072 (128 megabytes). If GCC is not able to calculate RAM
on a particular platform, the lower bound is used. Setting this parameter very large effectively disables garbage collection.
Setting this parameter and ggc-min-expand to zero causes a full collection to occur at every opportunity.

max-reload-search-insns
The maximum number of instruction reload should look backward for equivalent register. Increasing values mean more aggressive
optimization, making the compilation time increase with probably slightly better performance. The default value is 100.

max-cselib-memory-locations
The maximum number of memory locations cselib should take into account. Increasing values mean more aggressive optimization,
making the compilation time increase with probably slightly better performance. The default value is 500.

max-sched-ready-insns
The maximum number of instructions ready to be issued the scheduler should consider at any given time during the first scheduling
pass. Increasing values mean more thorough searches, making the compilation time increase with probably little benefit. The
default value is 100.

max-sched-region-blocks
The maximum number of blocks in a region to be considered for interblock scheduling. The default value is 10.

max-pipeline-region-blocks
The maximum number of blocks in a region to be considered for pipelining in the selective scheduler. The default value is 15.

max-sched-region-insns
The maximum number of insns in a region to be considered for interblock scheduling. The default value is 100.

max-pipeline-region-insns
The maximum number of insns in a region to be considered for pipelining in the selective scheduler. The default value is 200.

min-spec-prob
The minimum probability (in percents) of reaching a source block for interblock speculative scheduling. The default value is 40.

max-sched-extend-regions-iters
The maximum number of iterations through CFG to extend regions. A value of 0 (the default) disables region extensions.

max-sched-insn-conflict-delay
The maximum conflict delay for an insn to be considered for speculative motion. The default value is 3.

sched-spec-prob-cutoff
The minimal probability of speculation success (in percents), so that speculative insns are scheduled. The default value is 40.

sched-state-edge-prob-cutoff
The minimum probability an edge must have for the scheduler to save its state across it. The default value is 10.

sched-mem-true-dep-cost
Minimal distance (in CPU cycles) between store and load targeting same memory locations. The default value is 1.

selsched-max-lookahead
The maximum size of the lookahead window of selective scheduling. It is a depth of search for available instructions. The default
value is 50.

selsched-max-sched-times
The maximum number of times that an instruction is scheduled during selective scheduling. This is the limit on the number of
iterations through which the instruction may be pipelined. The default value is 2.

selsched-insns-to-rename
The maximum number of best instructions in the ready list that are considered for renaming in the selective scheduler. The default
value is 2.

sms-min-sc
The minimum value of stage count that swing modulo scheduler generates. The default value is 2.

max-last-value-rtl
The maximum size measured as number of RTLs that can be recorded in an expression in combiner for a pseudo register as last known
value of that register. The default is 10000.

max-combine-insns
The maximum number of instructions the RTL combiner tries to combine. The default value is 2 at -Og and 4 otherwise.

integer-share-limit
Small integer constants can use a shared data structure, reducing the compiler's memory usage and increasing its speed. This sets
the maximum value of a shared integer constant. The default value is 256.

ssp-buffer-size
The minimum size of buffers (i.e. arrays) that receive stack smashing protection when -fstack-protection is used.

This default before Ubuntu 10.10 was "8". Currently it is "4", to increase the number of functions protected by the stack
protector.

min-size-for-stack-sharing
The minimum size of variables taking part in stack slot sharing when not optimizing. The default value is 32.

max-jump-thread-duplication-stmts
Maximum number of statements allowed in a block that needs to be duplicated when threading jumps.

max-fields-for-field-sensitive
Maximum number of fields in a structure treated in a field sensitive manner during pointer analysis. The default is zero for -O0
and -O1, and 100 for -Os, -O2, and -O3.

prefetch-latency
Estimate on average number of instructions that are executed before prefetch finishes. The distance prefetched ahead is
proportional to this constant. Increasing this number may also lead to less streams being prefetched (see simultaneous-
prefetches).

simultaneous-prefetches
Maximum number of prefetches that can run at the same time.

l1-cache-line-size
The size of cache line in L1 cache, in bytes.

l1-cache-size
The size of L1 cache, in kilobytes.

l2-cache-size
The size of L2 cache, in kilobytes.

min-insn-to-prefetch-ratio
The minimum ratio between the number of instructions and the number of prefetches to enable prefetching in a loop.

prefetch-min-insn-to-mem-ratio
The minimum ratio between the number of instructions and the number of memory references to enable prefetching in a loop.

use-canonical-types
Whether the compiler should use the "canonical" type system. By default, this should always be 1, which uses a more efficient
internal mechanism for comparing types in C++ and Objective-C++. However, if bugs in the canonical type system are causing
compilation failures, set this value to 0 to disable canonical types.

switch-conversion-max-branch-ratio
Switch initialization conversion refuses to create arrays that are bigger than switch-conversion-max-branch-ratio times the number
of branches in the switch.

max-partial-antic-length
Maximum length of the partial antic set computed during the tree partial redundancy elimination optimization (-ftree-pre) when
optimizing at -O3 and above. For some sorts of source code the enhanced partial redundancy elimination optimization can run away,
consuming all of the memory available on the host machine. This parameter sets a limit on the length of the sets that are
computed, which prevents the runaway behavior. Setting a value of 0 for this parameter allows an unlimited set length.

sccvn-max-scc-size
Maximum size of a strongly connected component (SCC) during SCCVN processing. If this limit is hit, SCCVN processing for the whole
function is not done and optimizations depending on it are disabled. The default maximum SCC size is 10000.

sccvn-max-alias-queries-per-access
Maximum number of alias-oracle queries we perform when looking for redundancies for loads and stores. If this limit is hit the
search is aborted and the load or store is not considered redundant. The number of queries is algorithmically limited to the
number of stores on all paths from the load to the function entry. The default maximum number of queries is 1000.

ira-max-loops-num
IRA uses regional register allocation by default. If a function contains more loops than the number given by this parameter, only
at most the given number of the most frequently-executed loops form regions for regional register allocation. The default value of
the parameter is 100.

ira-max-conflict-table-size
Although IRA uses a sophisticated algorithm to compress the conflict table, the table can still require excessive amounts of memory
for huge functions. If the conflict table for a function could be more than the size in MB given by this parameter, the register
allocator instead uses a faster, simpler, and lower-quality algorithm that does not require building a pseudo-register conflict
table. The default value of the parameter is 2000.

ira-loop-reserved-regs
IRA can be used to evaluate more accurate register pressure in loops for decisions to move loop invariants (see -O3). The number
of available registers reserved for some other purposes is given by this parameter. The default value of the parameter is 2, which
is the minimal number of registers needed by typical instructions. This value is the best found from numerous experiments.

lra-inheritance-ebb-probability-cutoff
LRA tries to reuse values reloaded in registers in subsequent insns. This optimization is called inheritance. EBB is used as a
region to do this optimization. The parameter defines a minimal fall-through edge probability in percentage used to add BB to
inheritance EBB in LRA. The default value of the parameter is 40. The value was chosen from numerous runs of SPEC2000 on x86-64.

loop-invariant-max-bbs-in-loop
Loop invariant motion can be very expensive, both in compilation time and in amount of needed compile-time memory, with very large
loops. Loops with more basic blocks than this parameter won't have loop invariant motion optimization performed on them. The
default value of the parameter is 1000 for -O1 and 10000 for -O2 and above.

loop-max-datarefs-for-datadeps
Building data dependencies is expensive for very large loops. This parameter limits the number of data references in loops that
are considered for data dependence analysis. These large loops are no handled by the optimizations using loop data dependencies.
The default value is 1000.

max-vartrack-size
Sets a maximum number of hash table slots to use during variable tracking dataflow analysis of any function. If this limit is
exceeded with variable tracking at assignments enabled, analysis for that function is retried without it, after removing all debug
insns from the function. If the limit is exceeded even without debug insns, var tracking analysis is completely disabled for the
function. Setting the parameter to zero makes it unlimited.

max-vartrack-expr-depth
Sets a maximum number of recursion levels when attempting to map variable names or debug temporaries to value expressions. This
trades compilation time for more complete debug information. If this is set too low, value expressions that are available and
could be represented in debug information may end up not being used; setting this higher may enable the compiler to find more
complex debug expressions, but compile time and memory use may grow. The default is 12.

min-nondebug-insn-uid
Use uids starting at this parameter for nondebug insns. The range below the parameter is reserved exclusively for debug insns
created by -fvar-tracking-assignments, but debug insns may get (non-overlapping) uids above it if the reserved range is exhausted.

ipa-sra-ptr-growth-factor
IPA-SRA replaces a pointer to an aggregate with one or more new parameters only when their cumulative size is less or equal to ipa-
sra-ptr-growth-factor times the size of the original pointer parameter.

sra-max-scalarization-size-Ospeed
sra-max-scalarization-size-Osize
The two Scalar Reduction of Aggregates passes (SRA and IPA-SRA) aim to replace scalar parts of aggregates with uses of independent
scalar variables. These parameters control the maximum size, in storage units, of aggregate which is considered for replacement
when compiling for speed (sra-max-scalarization-size-Ospeed) or size (sra-max-scalarization-size-Osize) respectively.

tm-max-aggregate-size
When making copies of thread-local variables in a transaction, this parameter specifies the size in bytes after which variables are
saved with the logging functions as opposed to save/restore code sequence pairs. This option only applies when using -fgnu-tm.

graphite-max-nb-scop-params
To avoid exponential effects in the Graphite loop transforms, the number of parameters in a Static Control Part (SCoP) is bounded.
The default value is 10 parameters. A variable whose value is unknown at compilation time and defined outside a SCoP is a
parameter of the SCoP.

graphite-max-bbs-per-function
To avoid exponential effects in the detection of SCoPs, the size of the functions analyzed by Graphite is bounded. The default
value is 100 basic blocks.

loop-block-tile-size
Loop blocking or strip mining transforms, enabled with -floop-block or -floop-strip-mine, strip mine each loop in the loop nest by
a given number of iterations. The strip length can be changed using the loop-block-tile-size parameter. The default value is 51
iterations.

loop-unroll-jam-size
Specify the unroll factor for the -floop-unroll-and-jam option. The default value is 4.

loop-unroll-jam-depth
Specify the dimension to be unrolled (counting from the most inner loop) for the -floop-unroll-and-jam. The default value is 2.

ipa-cp-value-list-size
IPA-CP attempts to track all possible values and types passed to a function's parameter in order to propagate them and perform
devirtualization. ipa-cp-value-list-size is the maximum number of values and types it stores per one formal parameter of a
function.

ipa-cp-eval-threshold
IPA-CP calculates its own score of cloning profitability heuristics and performs those cloning opportunities with scores that
exceed ipa-cp-eval-threshold.

ipa-cp-recursion-penalty
Percentage penalty the recursive functions will receive when they are evaluated for cloning.

ipa-cp-single-call-penalty
Percentage penalty functions containing a single call to another function will receive when they are evaluated for cloning.

ipa-max-agg-items
IPA-CP is also capable to propagate a number of scalar values passed in an aggregate. ipa-max-agg-items controls the maximum number
of such values per one parameter.

ipa-cp-loop-hint-bonus
When IPA-CP determines that a cloning candidate would make the number of iterations of a loop known, it adds a bonus of ipa-cp-
loop-hint-bonus to the profitability score of the candidate.

ipa-cp-array-index-hint-bonus
When IPA-CP determines that a cloning candidate would make the index of an array access known, it adds a bonus of ipa-cp-array-
index-hint-bonus to the profitability score of the candidate.

ipa-max-aa-steps
During its analysis of function bodies, IPA-CP employs alias analysis in order to track values pointed to by function parameters.
In order not spend too much time analyzing huge functions, it gives up and consider all memory clobbered after examining ipa-max-
aa-steps statements modifying memory.

lto-partitions
Specify desired number of partitions produced during WHOPR compilation. The number of partitions should exceed the number of CPUs
used for compilation. The default value is 32.

lto-min-partition
Size of minimal partition for WHOPR (in estimated instructions). This prevents expenses of splitting very small programs into too
many partitions.

lto-max-partition
Size of max partition for WHOPR (in estimated instructions). to provide an upper bound for individual size of partition. Meant to
be used only with balanced partitioning.

cxx-max-namespaces-for-diagnostic-help
The maximum number of namespaces to consult for suggestions when C++ name lookup fails for an identifier. The default is 1000.

sink-frequency-threshold
The maximum relative execution frequency (in percents) of the target block relative to a statement's original block to allow
statement sinking of a statement. Larger numbers result in more aggressive statement sinking. The default value is 75. A small
positive adjustment is applied for statements with memory operands as those are even more profitable so sink.

max-stores-to-sink
The maximum number of conditional store pairs that can be sunk. Set to 0 if either vectorization (-ftree-vectorize) or if-
conversion (-ftree-loop-if-convert) is disabled. The default is 2.

allow-store-data-races
Allow optimizers to introduce new data races on stores. Set to 1 to allow, otherwise to 0. This option is enabled by default at
optimization level -Ofast.

case-values-threshold
The smallest number of different values for which it is best to use a jump-table instead of a tree of conditional branches. If the
value is 0, use the default for the machine. The default is 0.

tree-reassoc-width
Set the maximum number of instructions executed in parallel in reassociated tree. This parameter overrides target dependent
heuristics used by default if has non zero value.

sched-pressure-algorithm
Choose between the two available implementations of -fsched-pressure. Algorithm 1 is the original implementation and is the more
likely to prevent instructions from being reordered. Algorithm 2 was designed to be a compromise between the relatively
conservative approach taken by algorithm 1 and the rather aggressive approach taken by the default scheduler. It relies more
heavily on having a regular register file and accurate register pressure classes. See haifa-sched.c in the GCC sources for more
details.

The default choice depends on the target.

max-slsr-cand-scan
Set the maximum number of existing candidates that are considered when seeking a basis for a new straight-line strength reduction
candidate.

asan-globals
Enable buffer overflow detection for global objects. This kind of protection is enabled by default if you are using
-fsanitize=address option. To disable global objects protection use --param asan-globals=0.

asan-stack
Enable buffer overflow detection for stack objects. This kind of protection is enabled by default when using -fsanitize=address.
To disable stack protection use --param asan-stack=0 option.

asan-instrument-reads
Enable buffer overflow detection for memory reads. This kind of protection is enabled by default when using -fsanitize=address.
To disable memory reads protection use --param asan-instrument-reads=0.

asan-instrument-writes
Enable buffer overflow detection for memory writes. This kind of protection is enabled by default when using -fsanitize=address.
To disable memory writes protection use --param asan-instrument-writes=0 option.

asan-memintrin
Enable detection for built-in functions. This kind of protection is enabled by default when using -fsanitize=address. To disable
built-in functions protection use --param asan-memintrin=0.

asan-use-after-return
Enable detection of use-after-return. This kind of protection is enabled by default when using the -fsanitize=address option. To
disable it use --param asan-use-after-return=0.

Note: By default the check is disabled at run time. To enable it, add "detect_stack_use_after_return=1" to the environment
variable ASAN_OPTIONS.

asan-instrumentation-with-call-threshold
If number of memory accesses in function being instrumented is greater or equal to this number, use callbacks instead of inline
checks. E.g. to disable inline code use --param asan-instrumentation-with-call-threshold=0.

use-after-scope-direct-emission-threshold
If the size of a local variable in bytes is smaller or equal to this number, directly poison (or unpoison) shadow memory instead of
using run-time callbacks. The default value is 256.

chkp-max-ctor-size
Static constructors generated by Pointer Bounds Checker may become very large and significantly increase compile time at
optimization level -O1 and higher. This parameter is a maximum number of statements in a single generated constructor. Default
value is 5000.

max-fsm-thread-path-insns
Maximum number of instructions to copy when duplicating blocks on a finite state automaton jump thread path. The default is 100.

max-fsm-thread-length
Maximum number of basic blocks on a finite state automaton jump thread path. The default is 10.

max-fsm-thread-paths
Maximum number of new jump thread paths to create for a finite state automaton. The default is 50.

parloops-chunk-size
Chunk size of omp schedule for loops parallelized by parloops. The default is 0.

parloops-schedule
Schedule type of omp schedule for loops parallelized by parloops (static, dynamic, guided, auto, runtime). The default is static.

max-ssa-name-query-depth
Maximum depth of recursion when querying properties of SSA names in things like fold routines. One level of recursion corresponds
to following a use-def chain.

hsa-gen-debug-stores
Enable emission of special debug stores within HSA kernels which are then read and reported by libgomp plugin. Generation of these
stores is disabled by default, use --param hsa-gen-debug-stores=1 to enable it.

max-speculative-devirt-maydefs
The maximum number of may-defs we analyze when looking for a must-def specifying the dynamic type of an object that invokes a
virtual call we may be able to devirtualize speculatively.

max-vrp-switch-assertions
The maximum number of assertions to add along the default edge of a switch statement during VRP. The default is 10.

Program Instrumentation Options
GCC supports a number of command-line options that control adding run-time instrumentation to the code it normally generates. For example,
one purpose of instrumentation is collect profiling statistics for use in finding program hot spots, code coverage analysis, or profile-
guided optimizations. Another class of program instrumentation is adding run-time checking to detect programming errors like invalid
pointer dereferences or out-of-bounds array accesses, as well as deliberately hostile attacks such as stack smashing or C++ vtable
hijacking. There is also a general hook which can be used to implement other forms of tracing or function-level instrumentation for debug
or program analysis purposes.

-p Generate extra code to write profile information suitable for the analysis program prof. You must use this option when compiling the
source files you want data about, and you must also use it when linking.

-pg Generate extra code to write profile information suitable for the analysis program gprof. You must use this option when compiling the
source files you want data about, and you must also use it when linking.

-fprofile-arcs
Add code so that program flow arcs are instrumented. During execution the program records how many times each branch and call is
executed and how many times it is taken or returns. On targets that support constructors with priority support, profiling properly
handles constructors, destructors and C++ constructors (and destructors) of classes which are used as a type of a global variable.

When the compiled program exits it saves this data to a file called auxname.gcda for each source file. The data may be used for
profile-directed optimizations (-fbranch-probabilities), or for test coverage analysis (-ftest-coverage). Each object file's auxname
is generated from the name of the output file, if explicitly specified and it is not the final executable, otherwise it is the basename
of the source file. In both cases any suffix is removed (e.g. foo.gcda for input file dir/foo.c, or dir/foo.gcda for output file
specified as -o dir/foo.o).

--coverage
This option is used to compile and link code instrumented for coverage analysis. The option is a synonym for -fprofile-arcs
-ftest-coverage (when compiling) and -lgcov (when linking). See the documentation for those options for more details.

* Compile the source files with -fprofile-arcs plus optimization and code generation options. For test coverage analysis, use the
additional -ftest-coverage option. You do not need to profile every source file in a program.

* Link your object files with -lgcov or -fprofile-arcs (the latter implies the former).

* Run the program on a representative workload to generate the arc profile information. This may be repeated any number of times.
You can run concurrent instances of your program, and provided that the file system supports locking, the data files will be
correctly updated. Unless a strict ISO C dialect option is in effect, "fork" calls are detected and correctly handled without
double counting.

* For profile-directed optimizations, compile the source files again with the same optimization and code generation options plus
-fbranch-probabilities.

* For test coverage analysis, use gcov to produce human readable information from the .gcno and .gcda files. Refer to the gcov
documentation for further information.

With -fprofile-arcs, for each function of your program GCC creates a program flow graph, then finds a spanning tree for the graph.
Only arcs that are not on the spanning tree have to be instrumented: the compiler adds code to count the number of times that these
arcs are executed. When an arc is the only exit or only entrance to a block, the instrumentation code can be added to the block;
otherwise, a new basic block must be created to hold the instrumentation code.

-ftest-coverage
Produce a notes file that the gcov code-coverage utility can use to show program coverage. Each source file's note file is called
auxname.gcno. Refer to the -fprofile-arcs option above for a description of auxname and instructions on how to generate test coverage
data. Coverage data matches the source files more closely if you do not optimize.

-fprofile-dir=path
Set the directory to search for the profile data files in to path. This option affects only the profile data generated by
-fprofile-generate, -ftest-coverage, -fprofile-arcs and used by -fprofile-use and -fbranch-probabilities and its related options. Both
absolute and relative paths can be used. By default, GCC uses the current directory as path, thus the profile data file appears in the
same directory as the object file.

-fprofile-generate
-fprofile-generate=path
Enable options usually used for instrumenting application to produce profile useful for later recompilation with profile feedback based
optimization. You must use -fprofile-generate both when compiling and when linking your program.

The following options are enabled: -fprofile-arcs, -fprofile-values, -fvpt.

If path is specified, GCC looks at the path to find the profile feedback data files. See -fprofile-dir.

To optimize the program based on the collected profile information, use -fprofile-use.

-fprofile-update=method
Alter the update method for an application instrumented for profile feedback based optimization. The method argument should be one of
single, atomic or prefer-atomic. The first one is useful for single-threaded applications, while the second one prevents profile
corruption by emitting thread-safe code.

Warning: When an application does not properly join all threads (or creates an detached thread), a profile file can be still corrupted.

Using prefer-atomic would be transformed either to atomic, when supported by a target, or to single otherwise. The GCC driver
automatically selects prefer-atomic when -pthread is present in the command line.

-fsanitize=address
Enable AddressSanitizer, a fast memory error detector. Memory access instructions are instrumented to detect out-of-bounds and use-
after-free bugs. The option enables -fsanitize-address-use-after-scope. See
<https://github.com/google/sanitizers/wiki/AddressSanitizer> for more details. The run-time behavior can be influenced using the
ASAN_OPTIONS environment variable. When set to "help=1", the available options are shown at startup of the instrumented program. See
<https://github.com/google/sanitizers/wiki/AddressSanitizerFlags#run-time-flags> for a list of supported options. The option cannot be
combined with -fsanitize=thread and/or -fcheck-pointer-bounds.

-fsanitize=kernel-address
Enable AddressSanitizer for Linux kernel. See <https://github.com/google/kasan/wiki> for more details. The option cannot be combined
with -fcheck-pointer-bounds.

-fsanitize=thread
Enable ThreadSanitizer, a fast data race detector. Memory access instructions are instrumented to detect data race bugs. See
<https://github.com/google/sanitizers/wiki#threadsanitizer> for more details. The run-time behavior can be influenced using the
TSAN_OPTIONS environment variable; see <https://github.com/google/sanitizers/wiki/ThreadSanitizerFlags> for a list of supported
options. The option cannot be combined with -fsanitize=address, -fsanitize=leak and/or -fcheck-pointer-bounds.

Note that sanitized atomic builtins cannot throw exceptions when operating on invalid memory addresses with non-call exceptions
(-fnon-call-exceptions).

-fsanitize=leak
Enable LeakSanitizer, a memory leak detector. This option only matters for linking of executables and the executable is linked against
a library that overrides "malloc" and other allocator functions. See
<https://github.com/google/sanitizers/wiki/AddressSanitizerLeakSanitizer> for more details. The run-time behavior can be influenced
using the LSAN_OPTIONS environment variable. The option cannot be combined with -fsanitize=thread.

-fsanitize=undefined
Enable UndefinedBehaviorSanitizer, a fast undefined behavior detector. Various computations are instrumented to detect undefined
behavior at runtime. Current suboptions are:

-fsanitize=shift
This option enables checking that the result of a shift operation is not undefined. Note that what exactly is considered undefined
differs slightly between C and C++, as well as between ISO C90 and C99, etc. This option has two suboptions, -fsanitize=shift-base
and -fsanitize=shift-exponent.

-fsanitize=shift-exponent
This option enables checking that the second argument of a shift operation is not negative and is smaller than the precision of the
promoted first argument.

-fsanitize=shift-base
If the second argument of a shift operation is within range, check that the result of a shift operation is not undefined. Note
that what exactly is considered undefined differs slightly between C and C++, as well as between ISO C90 and C99, etc.

-fsanitize=integer-divide-by-zero
Detect integer division by zero as well as "INT_MIN / -1" division.

-fsanitize=unreachable
With this option, the compiler turns the "__builtin_unreachable" call into a diagnostics message call instead. When reaching the
"__builtin_unreachable" call, the behavior is undefined.

-fsanitize=vla-bound
This option instructs the compiler to check that the size of a variable length array is positive.

-fsanitize=null
This option enables pointer checking. Particularly, the application built with this option turned on will issue an error message
when it tries to dereference a NULL pointer, or if a reference (possibly an rvalue reference) is bound to a NULL pointer, or if a
method is invoked on an object pointed by a NULL pointer.

-fsanitize=return
This option enables return statement checking. Programs built with this option turned on will issue an error message when the end
of a non-void function is reached without actually returning a value. This option works in C++ only.

-fsanitize=signed-integer-overflow
This option enables signed integer overflow checking. We check that the result of "+", "*", and both unary and binary "-" does not
overflow in the signed arithmetics. Note, integer promotion rules must be taken into account. That is, the following is not an
overflow:

signed char a = SCHAR_MAX;
a++;

-fsanitize=bounds
This option enables instrumentation of array bounds. Various out of bounds accesses are detected. Flexible array members,
flexible array member-like arrays, and initializers of variables with static storage are not instrumented. The option cannot be
combined with -fcheck-pointer-bounds.

-fsanitize=bounds-strict
This option enables strict instrumentation of array bounds. Most out of bounds accesses are detected, including flexible array
members and flexible array member-like arrays. Initializers of variables with static storage are not instrumented. The option
cannot be combined with -fcheck-pointer-bounds.

-fsanitize=alignment
This option enables checking of alignment of pointers when they are dereferenced, or when a reference is bound to insufficiently
aligned target, or when a method or constructor is invoked on insufficiently aligned object.

-fsanitize=object-size
This option enables instrumentation of memory references using the "__builtin_object_size" function. Various out of bounds pointer
accesses are detected.

-fsanitize=float-divide-by-zero
Detect floating-point division by zero. Unlike other similar options, -fsanitize=float-divide-by-zero is not enabled by
-fsanitize=undefined, since floating-point division by zero can be a legitimate way of obtaining infinities and NaNs.

-fsanitize=float-cast-overflow
This option enables floating-point type to integer conversion checking. We check that the result of the conversion does not
overflow. Unlike other similar options, -fsanitize=float-cast-overflow is not enabled by -fsanitize=undefined. This option does
not work well with "FE_INVALID" exceptions enabled.

-fsanitize=nonnull-attribute
This option enables instrumentation of calls, checking whether null values are not passed to arguments marked as requiring a non-
null value by the "nonnull" function attribute.

-fsanitize=returns-nonnull-attribute
This option enables instrumentation of return statements in functions marked with "returns_nonnull" function attribute, to detect
returning of null values from such functions.

-fsanitize=bool
This option enables instrumentation of loads from bool. If a value other than 0/1 is loaded, a run-time error is issued.

-fsanitize=enum
This option enables instrumentation of loads from an enum type. If a value outside the range of values for the enum type is
loaded, a run-time error is issued.

-fsanitize=vptr
This option enables instrumentation of C++ member function calls, member accesses and some conversions between pointers to base and
derived classes, to verify the referenced object has the correct dynamic type.

While -ftrapv causes traps for signed overflows to be emitted, -fsanitize=undefined gives a diagnostic message. This currently works
only for the C family of languages.

-fno-sanitize=all
This option disables all previously enabled sanitizers. -fsanitize=all is not allowed, as some sanitizers cannot be used together.

-fasan-shadow-offset=number
This option forces GCC to use custom shadow offset in AddressSanitizer checks. It is useful for experimenting with different shadow
memory layouts in Kernel AddressSanitizer.

-fsanitize-sections=s1,s2,...
Sanitize global variables in selected user-defined sections. si may contain wildcards.

-fsanitize-recover[=opts]
-fsanitize-recover= controls error recovery mode for sanitizers mentioned in comma-separated list of opts. Enabling this option for a
sanitizer component causes it to attempt to continue running the program as if no error happened. This means multiple runtime errors
can be reported in a single program run, and the exit code of the program may indicate success even when errors have been reported.
The -fno-sanitize-recover= option can be used to alter this behavior: only the first detected error is reported and program then exits
with a non-zero exit code.

Currently this feature only works for -fsanitize=undefined (and its suboptions except for -fsanitize=unreachable and
-fsanitize=return), -fsanitize=float-cast-overflow, -fsanitize=float-divide-by-zero, -fsanitize=bounds-strict,
-fsanitize=kernel-address and -fsanitize=address. For these sanitizers error recovery is turned on by default, except
-fsanitize=address, for which this feature is experimental. -fsanitize-recover=all and -fno-sanitize-recover=all is also accepted, the
former enables recovery for all sanitizers that support it, the latter disables recovery for all sanitizers that support it.

Even if a recovery mode is turned on the compiler side, it needs to be also enabled on the runtime library side, otherwise the failures
are still fatal. The runtime library defaults to "halt_on_error=0" for ThreadSanitizer and UndefinedBehaviorSanitizer, while default
value for AddressSanitizer is "halt_on_error=1". This can be overridden through setting the "halt_on_error" flag in the corresponding
environment variable.

Syntax without an explicit opts parameter is deprecated. It is equivalent to specifying an opts list of:

undefined,float-cast-overflow,float-divide-by-zero,bounds-strict

-fsanitize-address-use-after-scope
Enable sanitization of local variables to detect use-after-scope bugs. The option sets -fstack-reuse to none.

-fsanitize-undefined-trap-on-error
The -fsanitize-undefined-trap-on-error option instructs the compiler to report undefined behavior using "__builtin_trap" rather than a
"libubsan" library routine. The advantage of this is that the "libubsan" library is not needed and is not linked in, so this is usable
even in freestanding environments.

-fsanitize-coverage=trace-pc
Enable coverage-guided fuzzing code instrumentation. Inserts a call to "__sanitizer_cov_trace_pc" into every basic block.

-fbounds-check
For front ends that support it, generate additional code to check that indices used to access arrays are within the declared range.
This is currently only supported by the Fortran front end, where this option defaults to false.

-fcheck-pointer-bounds
Enable Pointer Bounds Checker instrumentation. Each memory reference is instrumented with checks of the pointer used for memory access
against bounds associated with that pointer.

Currently there is only an implementation for Intel MPX available, thus x86 GNU/Linux target and -mmpx are required to enable this
feature. MPX-based instrumentation requires a runtime library to enable MPX in hardware and handle bounds violation signals. By
default when -fcheck-pointer-bounds and -mmpx options are used to link a program, the GCC driver links against the libmpx and
libmpxwrappers libraries. Bounds checking on calls to dynamic libraries requires a linker with -z bndplt support; if GCC was
configured with a linker without support for this option (including the Gold linker and older versions of ld), a warning is given if
you link with -mmpx without also specifying -static, since the overall effectiveness of the bounds checking protection is reduced. See
also -static-libmpxwrappers.

MPX-based instrumentation may be used for debugging and also may be included in production code to increase program security.
Depending on usage, you may have different requirements for the runtime library. The current version of the MPX runtime library is
more oriented for use as a debugging tool. MPX runtime library usage implies -lpthread. See also -static-libmpx. The runtime library
behavior can be influenced using various CHKP_RT_* environment variables. See
<https://gcc.gnu.org/wiki/Intel%20MPX%20support%20in%20the%20GCC%20compiler> for more details.

Generated instrumentation may be controlled by various -fchkp-* options and by the "bnd_variable_size" structure field attribute and
"bnd_legacy", and "bnd_instrument" function attributes. GCC also provides a number of built-in functions for controlling the Pointer
Bounds Checker.

-fchkp-check-incomplete-type
Generate pointer bounds checks for variables with incomplete type. Enabled by default.

-fchkp-narrow-bounds
Controls bounds used by Pointer Bounds Checker for pointers to object fields. If narrowing is enabled then field bounds are used.
Otherwise object bounds are used. See also -fchkp-narrow-to-innermost-array and -fchkp-first-field-has-own-bounds. Enabled by
default.

-fchkp-first-field-has-own-bounds
Forces Pointer Bounds Checker to use narrowed bounds for the address of the first field in the structure. By default a pointer to the
first field has the same bounds as a pointer to the whole structure.

-fchkp-flexible-struct-trailing-arrays
Forces Pointer Bounds Checker to treat all trailing arrays in structures as possibly flexible. By default only array fields with zero
length or that are marked with attribute bnd_variable_size are treated as flexible.

-fchkp-narrow-to-innermost-array
Forces Pointer Bounds Checker to use bounds of the innermost arrays in case of nested static array access. By default this option is
disabled and bounds of the outermost array are used.

-fchkp-optimize
Enables Pointer Bounds Checker optimizations. Enabled by default at optimization levels -O, -O2, -O3.

-fchkp-use-fast-string-functions
Enables use of *_nobnd versions of string functions (not copying bounds) by Pointer Bounds Checker. Disabled by default.

-fchkp-use-nochk-string-functions
Enables use of *_nochk versions of string functions (not checking bounds) by Pointer Bounds Checker. Disabled by default.

-fchkp-use-static-bounds
Allow Pointer Bounds Checker to generate static bounds holding bounds of static variables. Enabled by default.

-fchkp-use-static-const-bounds
Use statically-initialized bounds for constant bounds instead of generating them each time they are required. By default enabled when
-fchkp-use-static-bounds is enabled.

-fchkp-treat-zero-dynamic-size-as-infinite
With this option, objects with incomplete type whose dynamically-obtained size is zero are treated as having infinite size instead by
Pointer Bounds Checker. This option may be helpful if a program is linked with a library missing size information for some symbols.
Disabled by default.

-fchkp-check-read
Instructs Pointer Bounds Checker to generate checks for all read accesses to memory. Enabled by default.

-fchkp-check-write
Instructs Pointer Bounds Checker to generate checks for all write accesses to memory. Enabled by default.

-fchkp-store-bounds
Instructs Pointer Bounds Checker to generate bounds stores for pointer writes. Enabled by default.

-fchkp-instrument-calls
Instructs Pointer Bounds Checker to pass pointer bounds to calls. Enabled by default.

-fchkp-instrument-marked-only
Instructs Pointer Bounds Checker to instrument only functions marked with the "bnd_instrument" attribute. Disabled by default.

-fchkp-use-wrappers
Allows Pointer Bounds Checker to replace calls to built-in functions with calls to wrapper functions. When -fchkp-use-wrappers is used
to link a program, the GCC driver automatically links against libmpxwrappers. See also -static-libmpxwrappers. Enabled by default.

-fstack-protector
Emit extra code to check for buffer overflows, such as stack smashing attacks. This is done by adding a guard variable to functions
with vulnerable objects. This includes functions that call "alloca", and functions with buffers larger than 8 bytes. The guards are
initialized when a function is entered and then checked when the function exits. If a guard check fails, an error message is printed
and the program exits.

-fstack-protector-all
Like -fstack-protector except that all functions are protected.

-fstack-protector-strong
Like -fstack-protector but includes additional functions to be protected --- those that have local array definitions, or have
references to local frame addresses.

-fstack-protector-explicit
Like -fstack-protector but only protects those functions which have the "stack_protect" attribute.

-fstack-check
Generate code to verify that you do not go beyond the boundary of the stack. You should specify this flag if you are running in an
environment with multiple threads, but you only rarely need to specify it in a single-threaded environment since stack overflow is
automatically detected on nearly all systems if there is only one stack.

Note that this switch does not actually cause checking to be done; the operating system or the language runtime must do that. The
switch causes generation of code to ensure that they see the stack being extended.

You can additionally specify a string parameter: no means no checking, generic means force the use of old-style checking, specific
means use the best checking method and is equivalent to bare -fstack-check.

Old-style checking is a generic mechanism that requires no specific target support in the compiler but comes with the following
drawbacks:

1. Modified allocation strategy for large objects: they are always allocated dynamically if their size exceeds a fixed threshold.

2. Fixed limit on the size of the static frame of functions: when it is topped by a particular function, stack checking is not
reliable and a warning is issued by the compiler.

3. Inefficiency: because of both the modified allocation strategy and the generic implementation, code performance is hampered.

Note that old-style stack checking is also the fallback method for specific if no target support has been added in the compiler.

-fstack-limit-register=reg
-fstack-limit-symbol=sym
-fno-stack-limit
Generate code to ensure that the stack does not grow beyond a certain value, either the value of a register or the address of a symbol.
If a larger stack is required, a signal is raised at run time. For most targets, the signal is raised before the stack overruns the
boundary, so it is possible to catch the signal without taking special precautions.

For instance, if the stack starts at absolute address 0x80000000 and grows downwards, you can use the flags
-fstack-limit-symbol=__stack_limit and -Wl,--defsym,__stack_limit=0x7ffe0000 to enforce a stack limit of 128KB. Note that this may
only work with the GNU linker.

You can locally override stack limit checking by using the "no_stack_limit" function attribute.

-fsplit-stack
Generate code to automatically split the stack before it overflows. The resulting program has a discontiguous stack which can only
overflow if the program is unable to allocate any more memory. This is most useful when running threaded programs, as it is no longer
necessary to calculate a good stack size to use for each thread. This is currently only implemented for the x86 targets running
GNU/Linux.

When code compiled with -fsplit-stack calls code compiled without -fsplit-stack, there may not be much stack space available for the
latter code to run. If compiling all code, including library code, with -fsplit-stack is not an option, then the linker can fix up
these calls so that the code compiled without -fsplit-stack always has a large stack. Support for this is implemented in the gold
linker in GNU binutils release 2.21 and later.

-fvtable-verify=[std|preinit|none]
This option is only available when compiling C++ code. It turns on (or off, if using -fvtable-verify=none) the security feature that
verifies at run time, for every virtual call, that the vtable pointer through which the call is made is valid for the type of the
object, and has not been corrupted or overwritten. If an invalid vtable pointer is detected at run time, an error is reported and
execution of the program is immediately halted.

This option causes run-time data structures to be built at program startup, which are used for verifying the vtable pointers. The
options std and preinit control the timing of when these data structures are built. In both cases the data structures are built before
execution reaches "main". Using -fvtable-verify=std causes the data structures to be built after shared libraries have been loaded and
initialized. -fvtable-verify=preinit causes them to be built before shared libraries have been loaded and initialized.

If this option appears multiple times in the command line with different values specified, none takes highest priority over both std
and preinit; preinit takes priority over std.

-fvtv-debug
When used in conjunction with -fvtable-verify=std or -fvtable-verify=preinit, causes debug versions of the runtime functions for the
vtable verification feature to be called. This flag also causes the compiler to log information about which vtable pointers it finds
for each class. This information is written to a file named vtv_set_ptr_data.log in the directory named by the environment variable
VTV_LOGS_DIR if that is defined or the current working directory otherwise.

Note: This feature appends data to the log file. If you want a fresh log file, be sure to delete any existing one.

-fvtv-counts
This is a debugging flag. When used in conjunction with -fvtable-verify=std or -fvtable-verify=preinit, this causes the compiler to
keep track of the total number of virtual calls it encounters and the number of verifications it inserts. It also counts the number of
calls to certain run-time library functions that it inserts and logs this information for each compilation unit. The compiler writes
this information to a file named vtv_count_data.log in the directory named by the environment variable VTV_LOGS_DIR if that is defined
or the current working directory otherwise. It also counts the size of the vtable pointer sets for each class, and writes this
information to vtv_class_set_sizes.log in the same directory.

Note: This feature appends data to the log files. To get fresh log files, be sure to delete any existing ones.

-finstrument-functions
Generate instrumentation calls for entry and exit to functions. Just after function entry and just before function exit, the following
profiling functions are called with the address of the current function and its call site. (On some platforms,
"__builtin_return_address" does not work beyond the current function, so the call site information may not be available to the
profiling functions otherwise.)

void __cyg_profile_func_enter (void *this_fn,
void *call_site);
void __cyg_profile_func_exit (void *this_fn,
void *call_site);

The first argument is the address of the start of the current function, which may be looked up exactly in the symbol table.

This instrumentation is also done for functions expanded inline in other functions. The profiling calls indicate where, conceptually,
the inline function is entered and exited. This means that addressable versions of such functions must be available. If all your uses
of a function are expanded inline, this may mean an additional expansion of code size. If you use "extern inline" in your C code, an
addressable version of such functions must be provided. (This is normally the case anyway, but if you get lucky and the optimizer
always expands the functions inline, you might have gotten away without providing static copies.)

A function may be given the attribute "no_instrument_function", in which case this instrumentation is not done. This can be used, for
example, for the profiling functions listed above, high-priority interrupt routines, and any functions from which the profiling
functions cannot safely be called (perhaps signal handlers, if the profiling routines generate output or allocate memory).

-finstrument-functions-exclude-file-list=file,file,...
Set the list of functions that are excluded from instrumentation (see the description of -finstrument-functions). If the file that
contains a function definition matches with one of file, then that function is not instrumented. The match is done on substrings: if
the file parameter is a substring of the file name, it is considered to be a match.

For example:

-finstrument-functions-exclude-file-list=/bits/stl,include/sys

excludes any inline function defined in files whose pathnames contain /bits/stl or include/sys.

If, for some reason, you want to include letter , in one of sym, write ,. For example, -finstrument-functions-exclude-file-list=',,tmp'
(note the single quote surrounding the option).

-finstrument-functions-exclude-function-list=sym,sym,...
This is similar to -finstrument-functions-exclude-file-list, but this option sets the list of function names to be excluded from
instrumentation. The function name to be matched is its user-visible name, such as "vector<int> blah(const vector<int> &)", not the
internal mangled name (e.g., "_Z4blahRSt6vectorIiSaIiEE"). The match is done on substrings: if the sym parameter is a substring of the
function name, it is considered to be a match. For C99 and C++ extended identifiers, the function name must be given in UTF-8, not
using universal character names.

Options Controlling the Preprocessor
These options control the C preprocessor, which is run on each C source file before actual compilation.

If you use the -E option, nothing is done except preprocessing. Some of these options make sense only together with -E because they cause
the preprocessor output to be unsuitable for actual compilation.

In addition to the options listed here, there are a number of options to control search paths for include files documented in Directory
Options. Options to control preprocessor diagnostics are listed in Warning Options.

-D name
Predefine name as a macro, with definition 1.

-D name=definition
The contents of definition are tokenized and processed as if they appeared during translation phase three in a #define directive. In
particular, the definition is truncated by embedded newline characters.

If you are invoking the preprocessor from a shell or shell-like program you may need to use the shell's quoting syntax to protect
characters such as spaces that have a meaning in the shell syntax.

If you wish to define a function-like macro on the command line, write its argument list with surrounding parentheses before the equals
sign (if any). Parentheses are meaningful to most shells, so you should quote the option. With sh and csh,
-D'name(args...)=definition' works.

-D and -U options are processed in the order they are given on the command line. All -imacros file and -include file options are
processed after all -D and -U options.

-U name
Cancel any previous definition of name, either built in or provided with a -D option.

-include file
Process file as if "#include "file"" appeared as the first line of the primary source file. However, the first directory searched for
file is the preprocessor's working directory instead of the directory containing the main source file. If not found there, it is
searched for in the remainder of the "#include "..."" search chain as normal.

If multiple -include options are given, the files are included in the order they appear on the command line.

-imacros file
Exactly like -include, except that any output produced by scanning file is thrown away. Macros it defines remain defined. This allows
you to acquire all the macros from a header without also processing its declarations.

All files specified by -imacros are processed before all files specified by -include.

-undef
Do not predefine any system-specific or GCC-specific macros. The standard predefined macros remain defined.

-pthread
Define additional macros required for using the POSIX threads library. You should use this option consistently for both compilation
and linking. This option is supported on GNU/Linux targets, most other Unix derivatives, and also on x86 Cygwin and MinGW targets.

-M Instead of outputting the result of preprocessing, output a rule suitable for make describing the dependencies of the main source file.
The preprocessor outputs one make rule containing the object file name for that source file, a colon, and the names of all the included
files, including those coming from -include or -imacros command-line options.

Unless specified explicitly (with -MT or -MQ), the object file name consists of the name of the source file with any suffix replaced
with object file suffix and with any leading directory parts removed. If there are many included files then the rule is split into
several lines using -newline. The rule has no commands.

This option does not suppress the preprocessor's debug output, such as -dM. To avoid mixing such debug output with the dependency
rules you should explicitly specify the dependency output file with -MF, or use an environment variable like DEPENDENCIES_OUTPUT.
Debug output is still sent to the regular output stream as normal.

Passing -M to the driver implies -E, and suppresses warnings with an implicit -w.

-MM Like -M but do not mention header files that are found in system header directories, nor header files that are included, directly or
indirectly, from such a header.

This implies that the choice of angle brackets or double quotes in an #include directive does not in itself determine whether that
header appears in -MM dependency output.

-MF file
When used with -M or -MM, specifies a file to write the dependencies to. If no -MF switch is given the preprocessor sends the rules to
the same place it would send preprocessed output.

When used with the driver options -MD or -MMD, -MF overrides the default dependency output file.

-MG In conjunction with an option such as -M requesting dependency generation, -MG assumes missing header files are generated files and
adds them to the dependency list without raising an error. The dependency filename is taken directly from the "#include" directive
without prepending any path. -MG also suppresses preprocessed output, as a missing header file renders this useless.

This feature is used in automatic updating of makefiles.

-MP This option instructs CPP to add a phony target for each dependency other than the main file, causing each to depend on nothing. These
dummy rules work around errors make gives if you remove header files without updating the Makefile to match.

This is typical output:

test.o: test.c test.h

test.h:

-MT target
Change the target of the rule emitted by dependency generation. By default CPP takes the name of the main input file, deletes any
directory components and any file suffix such as .c, and appends the platform's usual object suffix. The result is the target.

An -MT option sets the target to be exactly the string you specify. If you want multiple targets, you can specify them as a single
argument to -MT, or use multiple -MT options.

For example, -MT '$(objpfx)foo.o' might give

$(objpfx)foo.o: foo.c

-MQ target
Same as -MT, but it quotes any characters which are special to Make. -MQ '$(objpfx)foo.o' gives

$$(objpfx)foo.o: foo.c

The default target is automatically quoted, as if it were given with -MQ.

-MD -MD is equivalent to -M -MF file, except that -E is not implied. The driver determines file based on whether an -o option is given.
If it is, the driver uses its argument but with a suffix of .d, otherwise it takes the name of the input file, removes any directory
components and suffix, and applies a .d suffix.

If -MD is used in conjunction with -E, any -o switch is understood to specify the dependency output file, but if used without -E, each
-o is understood to specify a target object file.

Since -E is not implied, -MD can be used to generate a dependency output file as a side-effect of the compilation process.

-MMD
Like -MD except mention only user header files, not system header files.

-fpreprocessed
Indicate to the preprocessor that the input file has already been preprocessed. This suppresses things like macro expansion, trigraph
conversion, escaped newline splicing, and processing of most directives. The preprocessor still recognizes and removes comments, so
that you can pass a file preprocessed with -C to the compiler without problems. In this mode the integrated preprocessor is little
more than a tokenizer for the front ends.

-fpreprocessed is implicit if the input file has one of the extensions .i, .ii or .mi. These are the extensions that GCC uses for
preprocessed files created by -save-temps.

-fdirectives-only
When preprocessing, handle directives, but do not expand macros.

The option's behavior depends on the -E and -fpreprocessed options.

With -E, preprocessing is limited to the handling of directives such as "#define", "#ifdef", and "#error". Other preprocessor
operations, such as macro expansion and trigraph conversion are not performed. In addition, the -dD option is implicitly enabled.

With -fpreprocessed, predefinition of command line and most builtin macros is disabled. Macros such as "__LINE__", which are
contextually dependent, are handled normally. This enables compilation of files previously preprocessed with "-E -fdirectives-only".

With both -E and -fpreprocessed, the rules for -fpreprocessed take precedence. This enables full preprocessing of files previously
preprocessed with "-E -fdirectives-only".

-fdollars-in-identifiers
Accept $ in identifiers.

-fextended-identifiers
Accept universal character names in identifiers. This option is enabled by default for C99 (and later C standard versions) and C++.

-fno-canonical-system-headers
When preprocessing, do not shorten system header paths with canonicalization.

-ftabstop=width
Set the distance between tab stops. This helps the preprocessor report correct column numbers in warnings or errors, even if tabs
appear on the line. If the value is less than 1 or greater than 100, the option is ignored. The default is 8.

-ftrack-macro-expansion[=level]
Track locations of tokens across macro expansions. This allows the compiler to emit diagnostic about the current macro expansion stack
when a compilation error occurs in a macro expansion. Using this option makes the preprocessor and the compiler consume more memory.
The level parameter can be used to choose the level of precision of token location tracking thus decreasing the memory consumption if
necessary. Value 0 of level de-activates this option. Value 1 tracks tokens locations in a degraded mode for the sake of minimal memory
overhead. In this mode all tokens resulting from the expansion of an argument of a function-like macro have the same location. Value 2
tracks tokens locations completely. This value is the most memory hungry. When this option is given no argument, the default parameter
value is 2.

Note that "-ftrack-macro-expansion=2" is activated by default.

-fexec-charset=charset
Set the execution character set, used for string and character constants. The default is UTF-8. charset can be any encoding supported
by the system's "iconv" library routine.

-fwide-exec-charset=charset
Set the wide execution character set, used for wide string and character constants. The default is UTF-32 or UTF-16, whichever
corresponds to the width of "wchar_t". As with -fexec-charset, charset can be any encoding supported by the system's "iconv" library
routine; however, you will have problems with encodings that do not fit exactly in "wchar_t".

-finput-charset=charset
Set the input character set, used for translation from the character set of the input file to the source character set used by GCC. If
the locale does not specify, or GCC cannot get this information from the locale, the default is UTF-8. This can be overridden by
either the locale or this command-line option. Currently the command-line option takes precedence if there's a conflict. charset can
be any encoding supported by the system's "iconv" library routine.

-fpch-deps
When using precompiled headers, this flag causes the dependency-output flags to also list the files from the precompiled header's
dependencies. If not specified, only the precompiled header are listed and not the files that were used to create it, because those
files are not consulted when a precompiled header is used.

-fpch-preprocess
This option allows use of a precompiled header together with -E. It inserts a special "#pragma", "#pragma GCC pch_preprocess
"filename"" in the output to mark the place where the precompiled header was found, and its filename. When -fpreprocessed is in use,
GCC recognizes this "#pragma" and loads the PCH.

This option is off by default, because the resulting preprocessed output is only really suitable as input to GCC. It is switched on by
-save-temps.

You should not write this "#pragma" in your own code, but it is safe to edit the filename if the PCH file is available in a different
location. The filename may be absolute or it may be relative to GCC's current directory.

-fworking-directory
Enable generation of linemarkers in the preprocessor output that let the compiler know the current working directory at the time of
preprocessing. When this option is enabled, the preprocessor emits, after the initial linemarker, a second linemarker with the current
working directory followed by two slashes. GCC uses this directory, when it's present in the preprocessed input, as the directory
emitted as the current working directory in some debugging information formats. This option is implicitly enabled if debugging
information is enabled, but this can be inhibited with the negated form -fno-working-directory. If the -P flag is present in the
command line, this option has no effect, since no "#line" directives are emitted whatsoever.

-A predicate=answer
Make an assertion with the predicate predicate and answer answer. This form is preferred to the older form -A predicate(answer), which
is still supported, because it does not use shell special characters.

-A -predicate=answer
Cancel an assertion with the predicate predicate and answer answer.

-C Do not discard comments. All comments are passed through to the output file, except for comments in processed directives, which are
deleted along with the directive.

You should be prepared for side effects when using -C; it causes the preprocessor to treat comments as tokens in their own right. For
example, comments appearing at the start of what would be a directive line have the effect of turning that line into an ordinary source
line, since the first token on the line is no longer a #.

-CC Do not discard comments, including during macro expansion. This is like -C, except that comments contained within macros are also
passed through to the output file where the macro is expanded.

In addition to the side-effects of the -C option, the -CC option causes all C++-style comments inside a macro to be converted to
C-style comments. This is to prevent later use of that macro from inadvertently commenting out the remainder of the source line.

The -CC option is generally used to support lint comments.

-P Inhibit generation of linemarkers in the output from the preprocessor. This might be useful when running the preprocessor on something
that is not C code, and will be sent to a program which might be confused by the linemarkers.

-traditional
-traditional-cpp
Try to imitate the behavior of pre-standard C preprocessors, as opposed to ISO C preprocessors. See the GNU CPP manual for details.

Note that GCC does not otherwise attempt to emulate a pre-standard C compiler, and these options are only supported with the -E switch,
or when invoking CPP explicitly.

-trigraphs
Support ISO C trigraphs. These are three-character sequences, all starting with ??, that are defined by ISO C to stand for single
characters. For example, ??/ stands for , so '??/n' is a character constant for a newline.

The nine trigraphs and their replacements are

Trigraph: ??( ??) ??< ??> ??= ??/ ??' ??! ??-
Replacement: [ ] { } # ^ | ~

By default, GCC ignores trigraphs, but in standard-conforming modes it converts them. See the -std and -ansi options.

-remap
Enable special code to work around file systems which only permit very short file names, such as MS-DOS.

-H Print the name of each header file used, in addition to other normal activities. Each name is indented to show how deep in the
#include stack it is. Precompiled header files are also printed, even if they are found to be invalid; an invalid precompiled header
file is printed with ...x and a valid one with ...! .

-dletters
Says to make debugging dumps during compilation as specified by letters. The flags documented here are those relevant to the
preprocessor. Other letters are interpreted by the compiler proper, or reserved for future versions of GCC, and so are silently
ignored. If you specify letters whose behavior conflicts, the result is undefined.

-dM Instead of the normal output, generate a list of #define directives for all the macros defined during the execution of the
preprocessor, including predefined macros. This gives you a way of finding out what is predefined in your version of the
preprocessor. Assuming you have no file foo.h, the command

touch foo.h; cpp -dM foo.h

shows all the predefined macros.

If you use -dM without the -E option, -dM is interpreted as a synonym for -fdump-rtl-mach.

-dD Like -dM except in two respects: it does not include the predefined macros, and it outputs both the #define directives and the
result of preprocessing. Both kinds of output go to the standard output file.

-dN Like -dD, but emit only the macro names, not their expansions.

-dI Output #include directives in addition to the result of preprocessing.

-dU Like -dD except that only macros that are expanded, or whose definedness is tested in preprocessor directives, are output; the
output is delayed until the use or test of the macro; and #undef directives are also output for macros tested but undefined at the
time.

-fdebug-cpp
This option is only useful for debugging GCC. When used from CPP or with -E, it dumps debugging information about location maps.
Every token in the output is preceded by the dump of the map its location belongs to.

When used from GCC without -E, this option has no effect.

-Wp,option
You can use -Wp,option to bypass the compiler driver and pass option directly through to the preprocessor. If option contains commas,
it is split into multiple options at the commas. However, many options are modified, translated or interpreted by the compiler driver
before being passed to the preprocessor, and -Wp forcibly bypasses this phase. The preprocessor's direct interface is undocumented and
subject to change, so whenever possible you should avoid using -Wp and let the driver handle the options instead.

-Xpreprocessor option
Pass option as an option to the preprocessor. You can use this to supply system-specific preprocessor options that GCC does not
recognize.

If you want to pass an option that takes an argument, you must use -Xpreprocessor twice, once for the option and once for the argument.

-no-integrated-cpp
Perform preprocessing as a separate pass before compilation. By default, GCC performs preprocessing as an integrated part of input
tokenization and parsing. If this option is provided, the appropriate language front end (cc1, cc1plus, or cc1obj for C, C++, and
Objective-C, respectively) is instead invoked twice, once for preprocessing only and once for actual compilation of the preprocessed
input. This option may be useful in conjunction with the -B or -wrapper options to specify an alternate preprocessor or perform
additional processing of the program source between normal preprocessing and compilation.

Passing Options to the Assembler
You can pass options to the assembler.

-Wa,option
Pass option as an option to the assembler. If option contains commas, it is split into multiple options at the commas.

-Xassembler option
Pass option as an option to the assembler. You can use this to supply system-specific assembler options that GCC does not recognize.

If you want to pass an option that takes an argument, you must use -Xassembler twice, once for the option and once for the argument.

Options for Linking
These options come into play when the compiler links object files into an executable output file. They are meaningless if the compiler is
not doing a link step.

object-file-name
A file name that does not end in a special recognized suffix is considered to name an object file or library. (Object files are
distinguished from libraries by the linker according to the file contents.) If linking is done, these object files are used as input
to the linker.

-c
-S
-E If any of these options is used, then the linker is not run, and object file names should not be used as arguments.

-fuse-ld=bfd
Use the bfd linker instead of the default linker.

-fuse-ld=gold
Use the gold linker instead of the default linker.

-fuse-ld=lld
Use the LLVM lld linker instead of the default linker.

-llibrary
-l library
Search the library named library when linking. (The second alternative with the library as a separate argument is only for POSIX
compliance and is not recommended.)

It makes a difference where in the command you write this option; the linker searches and processes libraries and object files in the
order they are specified. Thus, foo.o -lz bar.o searches library z after file foo.o but before bar.o. If bar.o refers to functions in
z, those functions may not be loaded.

The linker searches a standard list of directories for the library, which is actually a file named liblibrary.a. The linker then uses
this file as if it had been specified precisely by name.

The directories searched include several standard system directories plus any that you specify with -L.

Normally the files found this way are library files---archive files whose members are object files. The linker handles an archive file
by scanning through it for members which define symbols that have so far been referenced but not defined. But if the file that is
found is an ordinary object file, it is linked in the usual fashion. The only difference between using an -l option and specifying a
file name is that -l surrounds library with lib and .a and searches several directories.

-lobjc
You need this special case of the -l option in order to link an Objective-C or Objective-C++ program.

-nostartfiles
Do not use the standard system startup files when linking. The standard system libraries are used normally, unless -nostdlib or
-nodefaultlibs is used.

-nodefaultlibs
Do not use the standard system libraries when linking. Only the libraries you specify are passed to the linker, and options specifying
linkage of the system libraries, such as -static-libgcc or -shared-libgcc, are ignored. The standard startup files are used normally,
unless -nostartfiles is used.

The compiler may generate calls to "memcmp", "memset", "memcpy" and "memmove". These entries are usually resolved by entries in libc.
These entry points should be supplied through some other mechanism when this option is specified.

-nostdlib
Do not use the standard system startup files or libraries when linking. No startup files and only the libraries you specify are passed
to the linker, and options specifying linkage of the system libraries, such as -static-libgcc or -shared-libgcc, are ignored.

One of the standard libraries bypassed by -nostdlib and -nodefaultlibs is libgcc.a, a library of internal subroutines which GCC uses to
overcome shortcomings of particular machines, or special needs for some languages.

In most cases, you need libgcc.a even when you want to avoid other standard libraries. In other words, when you specify -nostdlib or
-nodefaultlibs you should usually specify -lgcc as well. This ensures that you have no unresolved references to internal GCC library
subroutines. (An example of such an internal subroutine is "__main", used to ensure C++ constructors are called.)

-pie
Produce a position independent executable on targets that support it. For predictable results, you must also specify the same set of
options used for compilation (-fpie, -fPIE, or model suboptions) when you specify this linker option.

-no-pie
Don't produce a position independent executable.

-pthread
Link with the POSIX threads library. This option is supported on GNU/Linux targets, most other Unix derivatives, and also on x86
Cygwin and MinGW targets. On some targets this option also sets flags for the preprocessor, so it should be used consistently for both
compilation and linking.

-rdynamic
Pass the flag -export-dynamic to the ELF linker, on targets that support it. This instructs the linker to add all symbols, not only
used ones, to the dynamic symbol table. This option is needed for some uses of "dlopen" or to allow obtaining backtraces from within a
program.

-s Remove all symbol table and relocation information from the executable.

-static
On systems that support dynamic linking, this prevents linking with the shared libraries. On other systems, this option has no effect.

-shared
Produce a shared object which can then be linked with other objects to form an executable. Not all systems support this option. For
predictable results, you must also specify the same set of options used for compilation (-fpic, -fPIC, or model suboptions) when you
specify this linker option.[1]

-shared-libgcc
-static-libgcc
On systems that provide libgcc as a shared library, these options force the use of either the shared or static version, respectively.
If no shared version of libgcc was built when the compiler was configured, these options have no effect.

There are several situations in which an application should use the shared libgcc instead of the static version. The most common of
these is when the application wishes to throw and catch exceptions across different shared libraries. In that case, each of the
libraries as well as the application itself should use the shared libgcc.

Therefore, the G++ and driver automatically adds -shared-libgcc
whenever you build a shared library or a main executable, because C++
programs typically use exceptions, so this is the right thing to do.

If, instead, you use the GCC driver to create shared libraries, you may find that they are not always linked with the shared libgcc.
If GCC finds, at its configuration time, that you have a non-GNU linker or a GNU linker that does not support option --eh-frame-hdr, it
links the shared version of libgcc into shared libraries by default. Otherwise, it takes advantage of the linker and optimizes away
the linking with the shared version of libgcc, linking with the static version of libgcc by default. This allows exceptions to
propagate through such shared libraries, without incurring relocation costs at library load time.

However, if a library or main executable is supposed to throw or catch exceptions, you must link it using the G++ driver, as
appropriate for the languages used in the program, or using the option -shared-libgcc, such that it is linked with the shared libgcc.

-static-libasan
When the -fsanitize=address option is used to link a program, the GCC driver automatically links against libasan. If libasan is
available as a shared library, and the -static option is not used, then this links against the shared version of libasan. The
-static-libasan option directs the GCC driver to link libasan statically, without necessarily linking other libraries statically.

-static-libtsan
When the -fsanitize=thread option is used to link a program, the GCC driver automatically links against libtsan. If libtsan is
available as a shared library, and the -static option is not used, then this links against the shared version of libtsan. The
-static-libtsan option directs the GCC driver to link libtsan statically, without necessarily linking other libraries statically.

-static-liblsan
When the -fsanitize=leak option is used to link a program, the GCC driver automatically links against liblsan. If liblsan is available
as a shared library, and the -static option is not used, then this links against the shared version of liblsan. The -static-liblsan
option directs the GCC driver to link liblsan statically, without necessarily linking other libraries statically.

-static-libubsan
When the -fsanitize=undefined option is used to link a program, the GCC driver automatically links against libubsan. If libubsan is
available as a shared library, and the -static option is not used, then this links against the shared version of libubsan. The
-static-libubsan option directs the GCC driver to link libubsan statically, without necessarily linking other libraries statically.

-static-libmpx
When the -fcheck-pointer bounds and -mmpx options are used to link a program, the GCC driver automatically links against libmpx. If
libmpx is available as a shared library, and the -static option is not used, then this links against the shared version of libmpx. The
-static-libmpx option directs the GCC driver to link libmpx statically, without necessarily linking other libraries statically.

-static-libmpxwrappers
When the -fcheck-pointer bounds and -mmpx options are used to link a program without also using -fno-chkp-use-wrappers, the GCC driver
automatically links against libmpxwrappers. If libmpxwrappers is available as a shared library, and the -static option is not used,
then this links against the shared version of libmpxwrappers. The -static-libmpxwrappers option directs the GCC driver to link
libmpxwrappers statically, without necessarily linking other libraries statically.

-static-libstdc++
When the g++ program is used to link a C++ program, it normally automatically links against libstdc++. If libstdc++ is available as a
shared library, and the -static option is not used, then this links against the shared version of libstdc++. That is normally fine.
However, it is sometimes useful to freeze the version of libstdc++ used by the program without going all the way to a fully static
link. The -static-libstdc++ option directs the g++ driver to link libstdc++ statically, without necessarily linking other libraries
statically.

-symbolic
Bind references to global symbols when building a shared object. Warn about any unresolved references (unless overridden by the link
editor option -Xlinker -z -Xlinker defs). Only a few systems support this option.

-T script
Use script as the linker script. This option is supported by most systems using the GNU linker. On some targets, such as bare-board
targets without an operating system, the -T option may be required when linking to avoid references to undefined symbols.

-Xlinker option
Pass option as an option to the linker. You can use this to supply system-specific linker options that GCC does not recognize.

If you want to pass an option that takes a separate argument, you must use -Xlinker twice, once for the option and once for the
argument. For example, to pass -assert definitions, you must write -Xlinker -assert -Xlinker definitions. It does not work to write
-Xlinker "-assert definitions", because this passes the entire string as a single argument, which is not what the linker expects.

When using the GNU linker, it is usually more convenient to pass arguments to linker options using the option=value syntax than as
separate arguments. For example, you can specify -Xlinker -Map=output.map rather than -Xlinker -Map -Xlinker output.map. Other
linkers may not support this syntax for command-line options.

-Wl,option
Pass option as an option to the linker. If option contains commas, it is split into multiple options at the commas. You can use this
syntax to pass an argument to the option. For example, -Wl,-Map,output.map passes -Map output.map to the linker. When using the GNU
linker, you can also get the same effect with -Wl,-Map=output.map.

NOTE: In Ubuntu 8.10 and later versions, for LDFLAGS, the option -Wl,-z,relro is used. To disable, use -Wl,-z,norelro.

-u symbol
Pretend the symbol symbol is undefined, to force linking of library modules to define it. You can use -u multiple times with different
symbols to force loading of additional library modules.

-z keyword
-z is passed directly on to the linker along with the keyword keyword. See the section in the documentation of your linker for
permitted values and their meanings.

Options for Directory Search
These options specify directories to search for header files, for libraries and for parts of the compiler:

-I dir
-iquote dir
-isystem dir
-idirafter dir
Add the directory dir to the list of directories to be searched for header files during preprocessing. If dir begins with =, then the
= is replaced by the sysroot prefix; see --sysroot and -isysroot.

Directories specified with -iquote apply only to the quote form of the directive, "#include "file"". Directories specified with -I,
-isystem, or -idirafter apply to lookup for both the "#include "file"" and "#include <file>" directives.

You can specify any number or combination of these options on the command line to search for header files in several directories. The
lookup order is as follows:

1. For the quote form of the include directive, the directory of the current file is searched first.

2. For the quote form of the include directive, the directories specified by -iquote options are searched in left-to-right order, as
they appear on the command line.

3. Directories specified with -I options are scanned in left-to-right order.

4. Directories specified with -isystem options are scanned in left-to-right order.

5. Standard system directories are scanned.

6. Directories specified with -idirafter options are scanned in left-to-right order.

You can use -I to override a system header file, substituting your own version, since these directories are searched before the
standard system header file directories. However, you should not use this option to add directories that contain vendor-supplied
system header files; use -isystem for that.

The -isystem and -idirafter options also mark the directory as a system directory, so that it gets the same special treatment that is
applied to the standard system directories.

If a standard system include directory, or a directory specified with -isystem, is also specified with -I, the -I option is ignored.
The directory is still searched but as a system directory at its normal position in the system include chain. This is to ensure that
GCC's procedure to fix buggy system headers and the ordering for the "#include_next" directive are not inadvertently changed. If you
really need to change the search order for system directories, use the -nostdinc and/or -isystem options.

-I- Split the include path. This option has been deprecated. Please use -iquote instead for -I directories before the -I- and remove the
-I- option.

Any directories specified with -I options before -I- are searched only for headers requested with "#include "file""; they are not
searched for "#include <file>". If additional directories are specified with -I options after the -I-, those directories are searched
for all #include directives.

In addition, -I- inhibits the use of the directory of the current file directory as the first search directory for "#include "file"".
There is no way to override this effect of -I-.

-iprefix prefix
Specify prefix as the prefix for subsequent -iwithprefix options. If the prefix represents a directory, you should include the final
/.

-iwithprefix dir
-iwithprefixbefore dir
Append dir to the prefix specified previously with -iprefix, and add the resulting directory to the include search path.
-iwithprefixbefore puts it in the same place -I would; -iwithprefix puts it where -idirafter would.

-isysroot dir
This option is like the --sysroot option, but applies only to header files (except for Darwin targets, where it applies to both header
files and libraries). See the --sysroot option for more information.

-imultilib dir
Use dir as a subdirectory of the directory containing target-specific C++ headers.

-nostdinc
Do not search the standard system directories for header files. Only the directories explicitly specified with -I, -iquote, -isystem,
and/or -idirafter options (and the directory of the current file, if appropriate) are searched.

-nostdinc++
Do not search for header files in the C++-specific standard directories, but do still search the other standard directories. (This
option is used when building the C++ library.)

-iplugindir=dir
Set the directory to search for plugins that are passed by -fplugin=name instead of -fplugin=path/name.so. This option is not meant to
be used by the user, but only passed by the driver.

-Ldir
Add directory dir to the list of directories to be searched for -l.

-Bprefix
This option specifies where to find the executables, libraries, include files, and data files of the compiler itself.

The compiler driver program runs one or more of the subprograms cpp, cc1, as and ld. It tries prefix as a prefix for each program it
tries to run, both with and without machine/version/ for the corresponding target machine and compiler version.

For each subprogram to be run, the compiler driver first tries the -B prefix, if any. If that name is not found, or if -B is not
specified, the driver tries two standard prefixes, /usr/lib/gcc/ and /usr/local/lib/gcc/. If neither of those results in a file name
that is found, the unmodified program name is searched for using the directories specified in your PATH environment variable.

The compiler checks to see if the path provided by -B refers to a directory, and if necessary it adds a directory separator character
at the end of the path.

-B prefixes that effectively specify directory names also apply to libraries in the linker, because the compiler translates these
options into -L options for the linker. They also apply to include files in the preprocessor, because the compiler translates these
options into -isystem options for the preprocessor. In this case, the compiler appends include to the prefix.

The runtime support file libgcc.a can also be searched for using the -B prefix, if needed. If it is not found there, the two standard
prefixes above are tried, and that is all. The file is left out of the link if it is not found by those means.

Another way to specify a prefix much like the -B prefix is to use the environment variable GCC_EXEC_PREFIX.

As a special kludge, if the path provided by -B is [dir/]stageN/, where N is a number in the range 0 to 9, then it is replaced by
[dir/]include. This is to help with boot-strapping the compiler.

-no-canonical-prefixes
Do not expand any symbolic links, resolve references to /../ or /./, or make the path absolute when generating a relative prefix.

--sysroot=dir
Use dir as the logical root directory for headers and libraries. For example, if the compiler normally searches for headers in
/usr/include and libraries in /usr/lib, it instead searches dir/usr/include and dir/usr/lib.

If you use both this option and the -isysroot option, then the --sysroot option applies to libraries, but the -isysroot option applies
to header files.

The GNU linker (beginning with version 2.16) has the necessary support for this option. If your linker does not support this option,
the header file aspect of --sysroot still works, but the library aspect does not.

--no-sysroot-suffix
For some targets, a suffix is added to the root directory specified with --sysroot, depending on the other options used, so that
headers may for example be found in dir/suffix/usr/include instead of dir/usr/include. This option disables the addition of such a
suffix.

Options for Code Generation Conventions
These machine-independent options control the interface conventions used in code generation.

Most of them have both positive and negative forms; the negative form of -ffoo is -fno-foo. In the table below, only one of the forms is
listed---the one that is not the default. You can figure out the other form by either removing no- or adding it.

-fstack-reuse=reuse-level
This option controls stack space reuse for user declared local/auto variables and compiler generated temporaries. reuse_level can be
all, named_vars, or none. all enables stack reuse for all local variables and temporaries, named_vars enables the reuse only for user
defined local variables with names, and none disables stack reuse completely. The default value is all. The option is needed when the
program extends the lifetime of a scoped local variable or a compiler generated temporary beyond the end point defined by the language.
When a lifetime of a variable ends, and if the variable lives in memory, the optimizing compiler has the freedom to reuse its stack
space with other temporaries or scoped local variables whose live range does not overlap with it. Legacy code extending local lifetime
is likely to break with the stack reuse optimization.

For example,

int *p;
{
int local1;

p = &local1;
local1 = 10;
....
}
{
int local2;
local2 = 20;
...
}

if (*p == 10) // out of scope use of local1
{

}

Another example:

struct A
{
A(int k) : i(k), j(k) { }
int i;
int j;
};

A *ap;

void foo(const A& ar)
{
ap = &ar;
}

void bar()
{
foo(A(10)); // temp object's lifetime ends when foo returns

{
A a(20);
....
}
ap->i+= 10; // ap references out of scope temp whose space
// is reused with a. What is the value of ap->i?
}

The lifetime of a compiler generated temporary is well defined by the C++ standard. When a lifetime of a temporary ends, and if the
temporary lives in memory, the optimizing compiler has the freedom to reuse its stack space with other temporaries or scoped local
variables whose live range does not overlap with it. However some of the legacy code relies on the behavior of older compilers in which
temporaries' stack space is not reused, the aggressive stack reuse can lead to runtime errors. This option is used to control the
temporary stack reuse optimization.

-ftrapv
This option generates traps for signed overflow on addition, subtraction, multiplication operations. The options -ftrapv and -fwrapv
override each other, so using -ftrapv -fwrapv on the command-line results in -fwrapv being effective. Note that only active options
override, so using -ftrapv -fwrapv -fno-wrapv on the command-line results in -ftrapv being effective.

-fwrapv
This option instructs the compiler to assume that signed arithmetic overflow of addition, subtraction and multiplication wraps around
using twos-complement representation. This flag enables some optimizations and disables others. The options -ftrapv and -fwrapv
override each other, so using -ftrapv -fwrapv on the command-line results in -fwrapv being effective. Note that only active options
override, so using -ftrapv -fwrapv -fno-wrapv on the command-line results in -ftrapv being effective.

-fexceptions
Enable exception handling. Generates extra code needed to propagate exceptions. For some targets, this implies GCC generates frame
unwind information for all functions, which can produce significant data size overhead, although it does not affect execution. If you
do not specify this option, GCC enables it by default for languages like C++ that normally require exception handling, and disables it
for languages like C that do not normally require it. However, you may need to enable this option when compiling C code that needs to
interoperate properly with exception handlers written in C++. You may also wish to disable this option if you are compiling older C++
programs that don't use exception handling.

-fnon-call-exceptions
Generate code that allows trapping instructions to throw exceptions. Note that this requires platform-specific runtime support that
does not exist everywhere. Moreover, it only allows trapping instructions to throw exceptions, i.e. memory references or floating-
point instructions. It does not allow exceptions to be thrown from arbitrary signal handlers such as "SIGALRM".

-fdelete-dead-exceptions
Consider that instructions that may throw exceptions but don't otherwise contribute to the execution of the program can be optimized
away. This option is enabled by default for the Ada front end, as permitted by the Ada language specification. Optimization passes
that cause dead exceptions to be removed are enabled independently at different optimization levels.

-funwind-tables
Similar to -fexceptions, except that it just generates any needed static data, but does not affect the generated code in any other way.
You normally do not need to enable this option; instead, a language processor that needs this handling enables it on your behalf.

-fasynchronous-unwind-tables
Generate unwind table in DWARF format, if supported by target machine. The table is exact at each instruction boundary, so it can be
used for stack unwinding from asynchronous events (such as debugger or garbage collector).

-fno-gnu-unique
On systems with recent GNU assembler and C library, the C++ compiler uses the "STB_GNU_UNIQUE" binding to make sure that definitions of
template static data members and static local variables in inline functions are unique even in the presence of "RTLD_LOCAL"; this is
necessary to avoid problems with a library used by two different "RTLD_LOCAL" plugins depending on a definition in one of them and
therefore disagreeing with the other one about the binding of the symbol. But this causes "dlclose" to be ignored for affected DSOs;
if your program relies on reinitialization of a DSO via "dlclose" and "dlopen", you can use -fno-gnu-unique.

-fpcc-struct-return
Return "short" "struct" and "union" values in memory like longer ones, rather than in registers. This convention is less efficient,
but it has the advantage of allowing intercallability between GCC-compiled files and files compiled with other compilers, particularly
the Portable C Compiler (pcc).

The precise convention for returning structures in memory depends on the target configuration macros.

Short structures and unions are those whose size and alignment match that of some integer type.

Warning: code compiled with the -fpcc-struct-return switch is not binary compatible with code compiled with the -freg-struct-return
switch. Use it to conform to a non-default application binary interface.

-freg-struct-return
Return "struct" and "union" values in registers when possible. This is more efficient for small structures than -fpcc-struct-return.

If you specify neither -fpcc-struct-return nor -freg-struct-return, GCC defaults to whichever convention is standard for the target.
If there is no standard convention, GCC defaults to -fpcc-struct-return, except on targets where GCC is the principal compiler. In
those cases, we can choose the standard, and we chose the more efficient register return alternative.

Warning: code compiled with the -freg-struct-return switch is not binary compatible with code compiled with the -fpcc-struct-return
switch. Use it to conform to a non-default application binary interface.

-fshort-enums
Allocate to an "enum" type only as many bytes as it needs for the declared range of possible values. Specifically, the "enum" type is
equivalent to the smallest integer type that has enough room.

Warning: the -fshort-enums switch causes GCC to generate code that is not binary compatible with code generated without that switch.
Use it to conform to a non-default application binary interface.

-fshort-wchar
Override the underlying type for "wchar_t" to be "short unsigned int" instead of the default for the target. This option is useful for
building programs to run under WINE.

Warning: the -fshort-wchar switch causes GCC to generate code that is not binary compatible with code generated without that switch.
Use it to conform to a non-default application binary interface.

-fno-common
In C code, this option controls the placement of global variables defined without an initializer, known as tentative definitions in the
C standard. Tentative definitions are distinct from declarations of a variable with the "extern" keyword, which do not allocate
storage.

Unix C compilers have traditionally allocated storage for uninitialized global variables in a common block. This allows the linker to
resolve all tentative definitions of the same variable in different compilation units to the same object, or to a non-tentative
definition. This is the behavior specified by -fcommon, and is the default for GCC on most targets. On the other hand, this behavior
is not required by ISO C, and on some targets may carry a speed or code size penalty on variable references.

The -fno-common option specifies that the compiler should instead place uninitialized global variables in the data section of the
object file. This inhibits the merging of tentative definitions by the linker so you get a multiple-definition error if the same
variable is defined in more than one compilation unit. Compiling with -fno-common is useful on targets for which it provides better
performance, or if you wish to verify that the program will work on other systems that always treat uninitialized variable definitions
this way.

-fno-ident
Ignore the "#ident" directive.

-finhibit-size-directive
Don't output a ".size" assembler directive, or anything else that would cause trouble if the function is split in the middle, and the
two halves are placed at locations far apart in memory. This option is used when compiling crtstuff.c; you should not need to use it
for anything else.

-fverbose-asm
Put extra commentary information in the generated assembly code to make it more readable. This option is generally only of use to
those who actually need to read the generated assembly code (perhaps while debugging the compiler itself).

-fno-verbose-asm, the default, causes the extra information to be omitted and is useful when comparing two assembler files.

The added comments include:

* information on the compiler version and command-line options,

* the source code lines associated with the assembly instructions, in the form FILENAME:LINENUMBER:CONTENT OF LINE,

* hints on which high-level expressions correspond to the various assembly instruction operands.

For example, given this C source file:

int test (int n)
{
int i;
int total = 0;

for (i = 0; i < n; i++)
total += i * i;

return total;
}

compiling to (x86_64) assembly via -S and emitting the result direct to stdout via -o -

gcc -S test.c -fverbose-asm -Os -o -

gives output similar to this:

.file "test.c"
# GNU C11 (GCC) version 7.0.0 20160809 (experimental) (x86_64-pc-linux-gnu)
[...snip...]
# options passed:
[...snip...]

.text
.globl test
.type test, @function
test:
.LFB0:
.cfi_startproc
# test.c:4: int total = 0;
xorl %eax, %eax # <retval>
# test.c:6: for (i = 0; i < n; i++)
xorl %edx, %edx # i
.L2:
# test.c:6: for (i = 0; i < n; i++)
cmpl %edi, %edx # n, i
jge .L5 #,
# test.c:7: total += i * i;
movl %edx, %ecx # i, tmp92
imull %edx, %ecx # i, tmp92
# test.c:6: for (i = 0; i < n; i++)
incl %edx # i
# test.c:7: total += i * i;
addl %ecx, %eax # tmp92, <retval>
jmp .L2 #
.L5:
# test.c:10: }
ret
.cfi_endproc
.LFE0:
.size test, .-test
.ident "GCC: (GNU) 7.0.0 20160809 (experimental)"
.section .note.GNU-stack,"",@progbits

The comments are intended for humans rather than machines and hence the precise format of the comments is subject to change.

-frecord-gcc-switches
This switch causes the command line used to invoke the compiler to be recorded into the object file that is being created. This switch
is only implemented on some targets and the exact format of the recording is target and binary file format dependent, but it usually
takes the form of a section containing ASCII text. This switch is related to the -fverbose-asm switch, but that switch only records
information in the assembler output file as comments, so it never reaches the object file. See also -grecord-gcc-switches for another
way of storing compiler options into the object file.

-fpic
Generate position-independent code (PIC) suitable for use in a shared library, if supported for the target machine. Such code accesses
all constant addresses through a global offset table (GOT). The dynamic loader resolves the GOT entries when the program starts (the
dynamic loader is not part of GCC; it is part of the operating system). If the GOT size for the linked executable exceeds a machine-
specific maximum size, you get an error message from the linker indicating that -fpic does not work; in that case, recompile with -fPIC
instead. (These maximums are 8k on the SPARC, 28k on AArch64 and 32k on the m68k and RS/6000. The x86 has no such limit.)

Position-independent code requires special support, and therefore works only on certain machines. For the x86, GCC supports PIC for
System V but not for the Sun 386i. Code generated for the IBM RS/6000 is always position-independent.

When this flag is set, the macros "__pic__" and "__PIC__" are defined to 1.

-fPIC
If supported for the target machine, emit position-independent code, suitable for dynamic linking and avoiding any limit on the size of
the global offset table. This option makes a difference on AArch64, m68k, PowerPC and SPARC.

Position-independent code requires special support, and therefore works only on certain machines.

When this flag is set, the macros "__pic__" and "__PIC__" are defined to 2.

-fpie
-fPIE
These options are similar to -fpic and -fPIC, but generated position independent code can be only linked into executables. Usually
these options are used when -pie GCC option is used during linking.

-fpie and -fPIE both define the macros "__pie__" and "__PIE__". The macros have the value 1 for -fpie and 2 for -fPIE.

-fno-plt
Do not use the PLT for external function calls in position-independent code. Instead, load the callee address at call sites from the
GOT and branch to it. This leads to more efficient code by eliminating PLT stubs and exposing GOT loads to optimizations. On
architectures such as 32-bit x86 where PLT stubs expect the GOT pointer in a specific register, this gives more register allocation
freedom to the compiler. Lazy binding requires use of the PLT; with -fno-plt all external symbols are resolved at load time.

Alternatively, the function attribute "noplt" can be used to avoid calls through the PLT for specific external functions.

In position-dependent code, a few targets also convert calls to functions that are marked to not use the PLT to use the GOT instead.

-fno-jump-tables
Do not use jump tables for switch statements even where it would be more efficient than other code generation strategies. This option
is of use in conjunction with -fpic or -fPIC for building code that forms part of a dynamic linker and cannot reference the address of
a jump table. On some targets, jump tables do not require a GOT and this option is not needed.

-ffixed-reg
Treat the register named reg as a fixed register; generated code should never refer to it (except perhaps as a stack pointer, frame
pointer or in some other fixed role).

reg must be the name of a register. The register names accepted are machine-specific and are defined in the "REGISTER_NAMES" macro in
the machine description macro file.

This flag does not have a negative form, because it specifies a three-way choice.

-fcall-used-reg
Treat the register named reg as an allocable register that is clobbered by function calls. It may be allocated for temporaries or
variables that do not live across a call. Functions compiled this way do not save and restore the register reg.

It is an error to use this flag with the frame pointer or stack pointer. Use of this flag for other registers that have fixed
pervasive roles in the machine's execution model produces disastrous results.

This flag does not have a negative form, because it specifies a three-way choice.

-fcall-saved-reg
Treat the register named reg as an allocable register saved by functions. It may be allocated even for temporaries or variables that
live across a call. Functions compiled this way save and restore the register reg if they use it.

A different sort of disaster results from the use of this flag for a register in which function values may be returned.

This flag does not have a negative form, because it specifies a three-way choice.

-fpack-struct[=n]
Without a value specified, pack all structure members together without holes. When a value is specified (which must be a small power
of two), pack structure members according to this value, representing the maximum alignment (that is, objects with default alignment
requirements larger than this are output potentially unaligned at the next fitting location.

Warning: the -fpack-struct switch causes GCC to generate code that is not binary compatible with code generated without that switch.
Additionally, it makes the code suboptimal. Use it to conform to a non-default application binary interface.

-fleading-underscore
This option and its counterpart, -fno-leading-underscore, forcibly change the way C symbols are represented in the object file. One
use is to help link with legacy assembly code.

Warning: the -fleading-underscore switch causes GCC to generate code that is not binary compatible with code generated without that
switch. Use it to conform to a non-default application binary interface. Not all targets provide complete support for this switch.

-ftls-model=model
Alter the thread-local storage model to be used. The model argument should be one of global-dynamic, local-dynamic, initial-exec or
local-exec. Note that the choice is subject to optimization: the compiler may use a more efficient model for symbols not visible
outside of the translation unit, or if -fpic is not given on the command line.

The default without -fpic is initial-exec; with -fpic the default is global-dynamic.

-ftrampolines
For targets that normally need trampolines for nested functions, always generate them instead of using descriptors. Otherwise, for
targets that do not need them, like for example HP-PA or IA-64, do nothing.

A trampoline is a small piece of code that is created at run time on the stack when the address of a nested function is taken, and is
used to call the nested function indirectly. Therefore, it requires the stack to be made executable in order for the program to work
properly.

-fno-trampolines is enabled by default on a language by language basis to let the compiler avoid generating them, if it computes that
this is safe, and replace them with descriptors. Descriptors are made up of data only, but the generated code must be prepared to deal
with them. As of this writing, -fno-trampolines is enabled by default only for Ada.

Moreover, code compiled with -ftrampolines and code compiled with -fno-trampolines are not binary compatible if nested functions are
present. This option must therefore be used on a program-wide basis and be manipulated with extreme care.

-fvisibility=[default|internal|hidden|protected]
Set the default ELF image symbol visibility to the specified option---all symbols are marked with this unless overridden within the
code. Using this feature can very substantially improve linking and load times of shared object libraries, produce more optimized
code, provide near-perfect API export and prevent symbol clashes. It is strongly recommended that you use this in any shared objects
you distribute.

Despite the nomenclature, default always means public; i.e., available to be linked against from outside the shared object. protected
and internal are pretty useless in real-world usage so the only other commonly used option is hidden. The default if -fvisibility
isn't specified is default, i.e., make every symbol public.

A good explanation of the benefits offered by ensuring ELF symbols have the correct visibility is given by "How To Write Shared
Libraries" by Ulrich Drepper (which can be found at <https://www.akkadia.org/drepper/>)---however a superior solution made possible by
this option to marking things hidden when the default is public is to make the default hidden and mark things public. This is the norm
with DLLs on Windows and with -fvisibility=hidden and "__attribute__ ((visibility("default")))" instead of "__declspec(dllexport)" you
get almost identical semantics with identical syntax. This is a great boon to those working with cross-platform projects.

For those adding visibility support to existing code, you may find "#pragma GCC visibility" of use. This works by you enclosing the
declarations you wish to set visibility for with (for example) "#pragma GCC visibility push(hidden)" and "#pragma GCC visibility pop".
Bear in mind that symbol visibility should be viewed as part of the API interface contract and thus all new code should always specify
visibility when it is not the default; i.e., declarations only for use within the local DSO should always be marked explicitly as
hidden as so to avoid PLT indirection overheads---making this abundantly clear also aids readability and self-documentation of the
code. Note that due to ISO C++ specification requirements, "operator new" and "operator delete" must always be of default visibility.

Be aware that headers from outside your project, in particular system headers and headers from any other library you use, may not be
expecting to be compiled with visibility other than the default. You may need to explicitly say "#pragma GCC visibility push(default)"
before including any such headers.

"extern" declarations are not affected by -fvisibility, so a lot of code can be recompiled with -fvisibility=hidden with no
modifications. However, this means that calls to "extern" functions with no explicit visibility use the PLT, so it is more effective
to use "__attribute ((visibility))" and/or "#pragma GCC visibility" to tell the compiler which "extern" declarations should be treated
as hidden.

Note that -fvisibility does affect C++ vague linkage entities. This means that, for instance, an exception class that is be thrown
between DSOs must be explicitly marked with default visibility so that the type_info nodes are unified between the DSOs.

An overview of these techniques, their benefits and how to use them is at <http://gcc.gnu.org/wiki/Visibility>.

-fstrict-volatile-bitfields
This option should be used if accesses to volatile bit-fields (or other structure fields, although the compiler usually honors those
types anyway) should use a single access of the width of the field's type, aligned to a natural alignment if possible. For example,
targets with memory-mapped peripheral registers might require all such accesses to be 16 bits wide; with this flag you can declare all
peripheral bit-fields as "unsigned short" (assuming short is 16 bits on these targets) to force GCC to use 16-bit accesses instead of,
perhaps, a more efficient 32-bit access.

If this option is disabled, the compiler uses the most efficient instruction. In the previous example, that might be a 32-bit load
instruction, even though that accesses bytes that do not contain any portion of the bit-field, or memory-mapped registers unrelated to
the one being updated.

In some cases, such as when the "packed" attribute is applied to a structure field, it may not be possible to access the field with a
single read or write that is correctly aligned for the target machine. In this case GCC falls back to generating multiple accesses
rather than code that will fault or truncate the result at run time.

Note: Due to restrictions of the C/C++11 memory model, write accesses are not allowed to touch non bit-field members. It is therefore
recommended to define all bits of the field's type as bit-field members.

The default value of this option is determined by the application binary interface for the target processor.

-fsync-libcalls
This option controls whether any out-of-line instance of the "__sync" family of functions may be used to implement the C++11 "__atomic"
family of functions.

The default value of this option is enabled, thus the only useful form of the option is -fno-sync-libcalls. This option is used in the
implementation of the libatomic runtime library.

GCC Developer Options
This section describes command-line options that are primarily of interest to GCC developers, including options to support compiler testing
and investigation of compiler bugs and compile-time performance problems. This includes options that produce debug dumps at various points
in the compilation; that print statistics such as memory use and execution time; and that print information about GCC's configuration, such
as where it searches for libraries. You should rarely need to use any of these options for ordinary compilation and linking tasks.

-dletters
-fdump-rtl-pass
-fdump-rtl-pass=filename
Says to make debugging dumps during compilation at times specified by letters. This is used for debugging the RTL-based passes of the
compiler. The file names for most of the dumps are made by appending a pass number and a word to the dumpname, and the files are
created in the directory of the output file. In case of =filename option, the dump is output on the given file instead of the pass
numbered dump files. Note that the pass number is assigned as passes are registered into the pass manager. Most passes are registered
in the order that they will execute and for these passes the number corresponds to the pass execution order. However, passes
registered by plugins, passes specific to compilation targets, or passes that are otherwise registered after all the other passes are
numbered higher than a pass named "final", even if they are executed earlier. dumpname is generated from the name of the output file
if explicitly specified and not an executable, otherwise it is the basename of the source file.

Some -dletters switches have different meaning when -E is used for preprocessing.

Debug dumps can be enabled with a -fdump-rtl switch or some -d option letters. Here are the possible letters for use in pass and
letters, and their meanings:

-fdump-rtl-alignments
Dump after branch alignments have been computed.

-fdump-rtl-asmcons
Dump after fixing rtl statements that have unsatisfied in/out constraints.

-fdump-rtl-auto_inc_dec
Dump after auto-inc-dec discovery. This pass is only run on architectures that have auto inc or auto dec instructions.

-fdump-rtl-barriers
Dump after cleaning up the barrier instructions.

-fdump-rtl-bbpart
Dump after partitioning hot and cold basic blocks.

-fdump-rtl-bbro
Dump after block reordering.

-fdump-rtl-btl1
-fdump-rtl-btl2
-fdump-rtl-btl1 and -fdump-rtl-btl2 enable dumping after the two branch target load optimization passes.

-fdump-rtl-bypass
Dump after jump bypassing and control flow optimizations.

-fdump-rtl-combine
Dump after the RTL instruction combination pass.

-fdump-rtl-compgotos
Dump after duplicating the computed gotos.

-fdump-rtl-ce1
-fdump-rtl-ce2
-fdump-rtl-ce3
-fdump-rtl-ce1, -fdump-rtl-ce2, and -fdump-rtl-ce3 enable dumping after the three if conversion passes.

-fdump-rtl-cprop_hardreg
Dump after hard register copy propagation.

-fdump-rtl-csa
Dump after combining stack adjustments.

-fdump-rtl-cse1
-fdump-rtl-cse2
-fdump-rtl-cse1 and -fdump-rtl-cse2 enable dumping after the two common subexpression elimination passes.

-fdump-rtl-dce
Dump after the standalone dead code elimination passes.

-fdump-rtl-dbr
Dump after delayed branch scheduling.

-fdump-rtl-dce1
-fdump-rtl-dce2
-fdump-rtl-dce1 and -fdump-rtl-dce2 enable dumping after the two dead store elimination passes.

-fdump-rtl-eh
Dump after finalization of EH handling code.

-fdump-rtl-eh_ranges
Dump after conversion of EH handling range regions.

-fdump-rtl-expand
Dump after RTL generation.

-fdump-rtl-fwprop1
-fdump-rtl-fwprop2
-fdump-rtl-fwprop1 and -fdump-rtl-fwprop2 enable dumping after the two forward propagation passes.

-fdump-rtl-gcse1
-fdump-rtl-gcse2
-fdump-rtl-gcse1 and -fdump-rtl-gcse2 enable dumping after global common subexpression elimination.

-fdump-rtl-init-regs
Dump after the initialization of the registers.

-fdump-rtl-initvals
Dump after the computation of the initial value sets.

-fdump-rtl-into_cfglayout
Dump after converting to cfglayout mode.

-fdump-rtl-ira
Dump after iterated register allocation.

-fdump-rtl-jump
Dump after the second jump optimization.

-fdump-rtl-loop2
-fdump-rtl-loop2 enables dumping after the rtl loop optimization passes.

-fdump-rtl-mach
Dump after performing the machine dependent reorganization pass, if that pass exists.

-fdump-rtl-mode_sw
Dump after removing redundant mode switches.

-fdump-rtl-rnreg
Dump after register renumbering.

-fdump-rtl-outof_cfglayout
Dump after converting from cfglayout mode.

-fdump-rtl-peephole2
Dump after the peephole pass.

-fdump-rtl-postreload
Dump after post-reload optimizations.

-fdump-rtl-pro_and_epilogue
Dump after generating the function prologues and epilogues.

-fdump-rtl-sched1
-fdump-rtl-sched2
-fdump-rtl-sched1 and -fdump-rtl-sched2 enable dumping after the basic block scheduling passes.

-fdump-rtl-ree
Dump after sign/zero extension elimination.

-fdump-rtl-seqabstr
Dump after common sequence discovery.

-fdump-rtl-shorten
Dump after shortening branches.

-fdump-rtl-sibling
Dump after sibling call optimizations.

-fdump-rtl-split1
-fdump-rtl-split2
-fdump-rtl-split3
-fdump-rtl-split4
-fdump-rtl-split5
These options enable dumping after five rounds of instruction splitting.

-fdump-rtl-sms
Dump after modulo scheduling. This pass is only run on some architectures.

-fdump-rtl-stack
Dump after conversion from GCC's "flat register file" registers to the x87's stack-like registers. This pass is only run on x86
variants.

-fdump-rtl-subreg1
-fdump-rtl-subreg2
-fdump-rtl-subreg1 and -fdump-rtl-subreg2 enable dumping after the two subreg expansion passes.

-fdump-rtl-unshare
Dump after all rtl has been unshared.

-fdump-rtl-vartrack
Dump after variable tracking.

-fdump-rtl-vregs
Dump after converting virtual registers to hard registers.

-fdump-rtl-web
Dump after live range splitting.

-fdump-rtl-regclass
-fdump-rtl-subregs_of_mode_init
-fdump-rtl-subregs_of_mode_finish
-fdump-rtl-dfinit
-fdump-rtl-dfinish
These dumps are defined but always produce empty files.

-da
-fdump-rtl-all
Produce all the dumps listed above.

-dA Annotate the assembler output with miscellaneous debugging information.

-dD Dump all macro definitions, at the end of preprocessing, in addition to normal output.

-dH Produce a core dump whenever an error occurs.

-dp Annotate the assembler output with a comment indicating which pattern and alternative is used. The length of each instruction is
also printed.

-dP Dump the RTL in the assembler output as a comment before each instruction. Also turns on -dp annotation.

-dx Just generate RTL for a function instead of compiling it. Usually used with -fdump-rtl-expand.

-fdump-noaddr
When doing debugging dumps, suppress address output. This makes it more feasible to use diff on debugging dumps for compiler
invocations with different compiler binaries and/or different text / bss / data / heap / stack / dso start locations.

-freport-bug
Collect and dump debug information into a temporary file if an internal compiler error (ICE) occurs.

-fdump-unnumbered
When doing debugging dumps, suppress instruction numbers and address output. This makes it more feasible to use diff on debugging
dumps for compiler invocations with different options, in particular with and without -g.

-fdump-unnumbered-links
When doing debugging dumps (see -d option above), suppress instruction numbers for the links to the previous and next instructions in a
sequence.

-fdump-translation-unit (C++ only)
-fdump-translation-unit-options (C++ only)
Dump a representation of the tree structure for the entire translation unit to a file. The file name is made by appending .tu to the
source file name, and the file is created in the same directory as the output file. If the -options form is used, options controls the
details of the dump as described for the -fdump-tree options.

-fdump-class-hierarchy (C++ only)
-fdump-class-hierarchy-options (C++ only)
Dump a representation of each class's hierarchy and virtual function table layout to a file. The file name is made by appending .class
to the source file name, and the file is created in the same directory as the output file. If the -options form is used, options
controls the details of the dump as described for the -fdump-tree options.

-fdump-ipa-switch
Control the dumping at various stages of inter-procedural analysis language tree to a file. The file name is generated by appending a
switch specific suffix to the source file name, and the file is created in the same directory as the output file. The following dumps
are possible:

all Enables all inter-procedural analysis dumps.

cgraph
Dumps information about call-graph optimization, unused function removal, and inlining decisions.

inline
Dump after function inlining.

-fdump-passes
Print on stderr the list of optimization passes that are turned on and off by the current command-line options.

-fdump-statistics-option
Enable and control dumping of pass statistics in a separate file. The file name is generated by appending a suffix ending in
.statistics to the source file name, and the file is created in the same directory as the output file. If the -option form is used,
-stats causes counters to be summed over the whole compilation unit while -details dumps every event as the passes generate them. The
default with no option is to sum counters for each function compiled.

-fdump-tree-all
-fdump-tree-switch
-fdump-tree-switch-options
-fdump-tree-switch-options=filename
Control the dumping at various stages of processing the intermediate language tree to a file. The file name is generated by appending
a switch-specific suffix to the source file name, and the file is created in the same directory as the output file. In case of
=filename option, the dump is output on the given file instead of the auto named dump files. If the -options form is used, options is
a list of - separated options which control the details of the dump. Not all options are applicable to all dumps; those that are not
meaningful are ignored. The following options are available

address
Print the address of each node. Usually this is not meaningful as it changes according to the environment and source file. Its
primary use is for tying up a dump file with a debug environment.

asmname
If "DECL_ASSEMBLER_NAME" has been set for a given decl, use that in the dump instead of "DECL_NAME". Its primary use is ease of
use working backward from mangled names in the assembly file.

slim
When dumping front-end intermediate representations, inhibit dumping of members of a scope or body of a function merely because
that scope has been reached. Only dump such items when they are directly reachable by some other path.

When dumping pretty-printed trees, this option inhibits dumping the bodies of control structures.

When dumping RTL, print the RTL in slim (condensed) form instead of the default LISP-like representation.

raw Print a raw representation of the tree. By default, trees are pretty-printed into a C-like representation.

details
Enable more detailed dumps (not honored by every dump option). Also include information from the optimization passes.

stats
Enable dumping various statistics about the pass (not honored by every dump option).

blocks
Enable showing basic block boundaries (disabled in raw dumps).

graph
For each of the other indicated dump files (-fdump-rtl-pass), dump a representation of the control flow graph suitable for viewing
with GraphViz to file.passid.pass.dot. Each function in the file is pretty-printed as a subgraph, so that GraphViz can render them
all in a single plot.

This option currently only works for RTL dumps, and the RTL is always dumped in slim form.

vops
Enable showing virtual operands for every statement.

lineno
Enable showing line numbers for statements.

uid Enable showing the unique ID ("DECL_UID") for each variable.

verbose
Enable showing the tree dump for each statement.

eh Enable showing the EH region number holding each statement.

scev
Enable showing scalar evolution analysis details.

optimized
Enable showing optimization information (only available in certain passes).

missed
Enable showing missed optimization information (only available in certain passes).

note
Enable other detailed optimization information (only available in certain passes).

=filename
Instead of an auto named dump file, output into the given file name. The file names stdout and stderr are treated specially and are
considered already open standard streams. For example,

gcc -O2 -ftree-vectorize -fdump-tree-vect-blocks=foo.dump
-fdump-tree-pre=/dev/stderr file.c

outputs vectorizer dump into foo.dump, while the PRE dump is output on to stderr. If two conflicting dump filenames are given for
the same pass, then the latter option overrides the earlier one.

all Turn on all options, except raw, slim, verbose and lineno.

optall
Turn on all optimization options, i.e., optimized, missed, and note.

To determine what tree dumps are available or find the dump for a pass of interest follow the steps below.

1. Invoke GCC with -fdump-passes and in the stderr output look for a code that corresponds to the pass you are interested in. For
example, the codes "tree-evrp", "tree-vrp1", and "tree-vrp2" correspond to the three Value Range Propagation passes. The number at
the end distinguishes distinct invocations of the same pass.

2. To enable the creation of the dump file, append the pass code to the -fdump- option prefix and invoke GCC with it. For example, to
enable the dump from the Early Value Range Propagation pass, invoke GCC with the -fdump-tree-evrp option. Optionally, you may
specify the name of the dump file. If you don't specify one, GCC creates as described below.

3. Find the pass dump in a file whose name is composed of three components separated by a period: the name of the source file GCC was
invoked to compile, a numeric suffix indicating the pass number followed by the letter t for tree passes (and the letter r for RTL
passes), and finally the pass code. For example, the Early VRP pass dump might be in a file named myfile.c.038t.evrp in the
current working directory. Note that the numeric codes are not stable and may change from one version of GCC to another.

-fopt-info
-fopt-info-options
-fopt-info-options=filename
Controls optimization dumps from various optimization passes. If the -options form is used, options is a list of - separated option
keywords to select the dump details and optimizations.

The options can be divided into two groups: options describing the verbosity of the dump, and options describing which optimizations
should be included. The options from both the groups can be freely mixed as they are non-overlapping. However, in case of any
conflicts, the later options override the earlier options on the command line.

The following options control the dump verbosity:

optimized
Print information when an optimization is successfully applied. It is up to a pass to decide which information is relevant. For
example, the vectorizer passes print the source location of loops which are successfully vectorized.

missed
Print information about missed optimizations. Individual passes control which information to include in the output.

note
Print verbose information about optimizations, such as certain transformations, more detailed messages about decisions etc.

all Print detailed optimization information. This includes optimized, missed, and note.

One or more of the following option keywords can be used to describe a group of optimizations:

ipa Enable dumps from all interprocedural optimizations.

loop
Enable dumps from all loop optimizations.

inline
Enable dumps from all inlining optimizations.

omp Enable dumps from all OMP (Offloading and Multi Processing) optimizations.

vec Enable dumps from all vectorization optimizations.

optall
Enable dumps from all optimizations. This is a superset of the optimization groups listed above.

If options is omitted, it defaults to optimized-optall, which means to dump all info about successful optimizations from all the
passes.

If the filename is provided, then the dumps from all the applicable optimizations are concatenated into the filename. Otherwise the
dump is output onto stderr. Though multiple -fopt-info options are accepted, only one of them can include a filename. If other
filenames are provided then all but the first such option are ignored.

Note that the output filename is overwritten in case of multiple translation units. If a combined output from multiple translation
units is desired, stderr should be used instead.

In the following example, the optimization info is output to stderr:

gcc -O3 -fopt-info

This example:

gcc -O3 -fopt-info-missed=missed.all

outputs missed optimization report from all the passes into missed.all, and this one:

gcc -O2 -ftree-vectorize -fopt-info-vec-missed

prints information about missed optimization opportunities from vectorization passes on stderr. Note that -fopt-info-vec-missed is
equivalent to -fopt-info-missed-vec.

As another example,

gcc -O3 -fopt-info-inline-optimized-missed=inline.txt

outputs information about missed optimizations as well as optimized locations from all the inlining passes into inline.txt.

Finally, consider:

gcc -fopt-info-vec-missed=vec.miss -fopt-info-loop-optimized=loop.opt

Here the two output filenames vec.miss and loop.opt are in conflict since only one output file is allowed. In this case, only the first
option takes effect and the subsequent options are ignored. Thus only vec.miss is produced which contains dumps from the vectorizer
about missed opportunities.

-fsched-verbose=n
On targets that use instruction scheduling, this option controls the amount of debugging output the scheduler prints to the dump files.

For n greater than zero, -fsched-verbose outputs the same information as -fdump-rtl-sched1 and -fdump-rtl-sched2. For n greater than
one, it also output basic block probabilities, detailed ready list information and unit/insn info. For n greater than two, it includes
RTL at abort point, control-flow and regions info. And for n over four, -fsched-verbose also includes dependence info.

-fenable-kind-pass
-fdisable-kind-pass=range-list
This is a set of options that are used to explicitly disable/enable optimization passes. These options are intended for use for
debugging GCC. Compiler users should use regular options for enabling/disabling passes instead.

-fdisable-ipa-pass
Disable IPA pass pass. pass is the pass name. If the same pass is statically invoked in the compiler multiple times, the pass name
should be appended with a sequential number starting from 1.

-fdisable-rtl-pass
-fdisable-rtl-pass=range-list
Disable RTL pass pass. pass is the pass name. If the same pass is statically invoked in the compiler multiple times, the pass
name should be appended with a sequential number starting from 1. range-list is a comma-separated list of function ranges or
assembler names. Each range is a number pair separated by a colon. The range is inclusive in both ends. If the range is trivial,
the number pair can be simplified as a single number. If the function's call graph node's uid falls within one of the specified
ranges, the pass is disabled for that function. The uid is shown in the function header of a dump file, and the pass names can be
dumped by using option -fdump-passes.

-fdisable-tree-pass
-fdisable-tree-pass=range-list
Disable tree pass pass. See -fdisable-rtl for the description of option arguments.

-fenable-ipa-pass
Enable IPA pass pass. pass is the pass name. If the same pass is statically invoked in the compiler multiple times, the pass name
should be appended with a sequential number starting from 1.

-fenable-rtl-pass
-fenable-rtl-pass=range-list
Enable RTL pass pass. See -fdisable-rtl for option argument description and examples.

-fenable-tree-pass
-fenable-tree-pass=range-list
Enable tree pass pass. See -fdisable-rtl for the description of option arguments.

Here are some examples showing uses of these options.

# disable ccp1 for all functions
-fdisable-tree-ccp1
# disable complete unroll for function whose cgraph node uid is 1
-fenable-tree-cunroll=1
# disable gcse2 for functions at the following ranges [1,1],
# [300,400], and [400,1000]
# disable gcse2 for functions foo and foo2
-fdisable-rtl-gcse2=foo,foo2
# disable early inlining
-fdisable-tree-einline
# disable ipa inlining
-fdisable-ipa-inline
# enable tree full unroll
-fenable-tree-unroll

-fchecking
-fchecking=n
Enable internal consistency checking. The default depends on the compiler configuration. -fchecking=2 enables further internal
consistency checking that might affect code generation.

-frandom-seed=string
This option provides a seed that GCC uses in place of random numbers in generating certain symbol names that have to be different in
every compiled file. It is also used to place unique stamps in coverage data files and the object files that produce them. You can
use the -frandom-seed option to produce reproducibly identical object files.

The string can either be a number (decimal, octal or hex) or an arbitrary string (in which case it's converted to a number by computing
CRC32).

The string should be different for every file you compile.

-save-temps
-save-temps=cwd
Store the usual "temporary" intermediate files permanently; place them in the current directory and name them based on the source file.
Thus, compiling foo.c with -c -save-temps produces files foo.i and foo.s, as well as foo.o. This creates a preprocessed foo.i output
file even though the compiler now normally uses an integrated preprocessor.

When used in combination with the -x command-line option, -save-temps is sensible enough to avoid over writing an input source file
with the same extension as an intermediate file. The corresponding intermediate file may be obtained by renaming the source file
before using -save-temps.

If you invoke GCC in parallel, compiling several different source files that share a common base name in different subdirectories or
the same source file compiled for multiple output destinations, it is likely that the different parallel compilers will interfere with
each other, and overwrite the temporary files. For instance:

gcc -save-temps -o outdir1/foo.o indir1/foo.c&
gcc -save-temps -o outdir2/foo.o indir2/foo.c&

may result in foo.i and foo.o being written to simultaneously by both compilers.

-save-temps=obj
Store the usual "temporary" intermediate files permanently. If the -o option is used, the temporary files are based on the object
file. If the -o option is not used, the -save-temps=obj switch behaves like -save-temps.

For example:

gcc -save-temps=obj -c foo.c
gcc -save-temps=obj -c bar.c -o dir/xbar.o
gcc -save-temps=obj foobar.c -o dir2/yfoobar

creates foo.i, foo.s, dir/xbar.i, dir/xbar.s, dir2/yfoobar.i, dir2/yfoobar.s, and dir2/yfoobar.o.

-time[=file]
Report the CPU time taken by each subprocess in the compilation sequence. For C source files, this is the compiler proper and
assembler (plus the linker if linking is done).

Without the specification of an output file, the output looks like this:

# cc1 0.12 0.01
# as 0.00 0.01

The first number on each line is the "user time", that is time spent executing the program itself. The second number is "system time",
time spent executing operating system routines on behalf of the program. Both numbers are in seconds.

With the specification of an output file, the output is appended to the named file, and it looks like this:

0.12 0.01 cc1 <options>
0.00 0.01 as <options>

The "user time" and the "system time" are moved before the program name, and the options passed to the program are displayed, so that
one can later tell what file was being compiled, and with which options.

-fdump-final-insns[=file]
Dump the final internal representation (RTL) to file. If the optional argument is omitted (or if file is "."), the name of the dump
file is determined by appending ".gkd" to the compilation output file name.

-fcompare-debug[=opts]
If no error occurs during compilation, run the compiler a second time, adding opts and -fcompare-debug-second to the arguments passed
to the second compilation. Dump the final internal representation in both compilations, and print an error if they differ.

If the equal sign is omitted, the default -gtoggle is used.

The environment variable GCC_COMPARE_DEBUG, if defined, non-empty and nonzero, implicitly enables -fcompare-debug. If
GCC_COMPARE_DEBUG is defined to a string starting with a dash, then it is used for opts, otherwise the default -gtoggle is used.

-fcompare-debug=, with the equal sign but without opts, is equivalent to -fno-compare-debug, which disables the dumping of the final
representation and the second compilation, preventing even GCC_COMPARE_DEBUG from taking effect.

To verify full coverage during -fcompare-debug testing, set GCC_COMPARE_DEBUG to say -fcompare-debug-not-overridden, which GCC rejects
as an invalid option in any actual compilation (rather than preprocessing, assembly or linking). To get just a warning, setting
GCC_COMPARE_DEBUG to -w%n-fcompare-debug not overridden will do.

-fcompare-debug-second
This option is implicitly passed to the compiler for the second compilation requested by -fcompare-debug, along with options to silence
warnings, and omitting other options that would cause side-effect compiler outputs to files or to the standard output. Dump files and
preserved temporary files are renamed so as to contain the ".gk" additional extension during the second compilation, to avoid
overwriting those generated by the first.

When this option is passed to the compiler driver, it causes the first compilation to be skipped, which makes it useful for little
other than debugging the compiler proper.

-gtoggle
Turn off generation of debug info, if leaving out this option generates it, or turn it on at level 2 otherwise. The position of this
argument in the command line does not matter; it takes effect after all other options are processed, and it does so only once, no
matter how many times it is given. This is mainly intended to be used with -fcompare-debug.

-fvar-tracking-assignments-toggle
Toggle -fvar-tracking-assignments, in the same way that -gtoggle toggles -g.

-Q Makes the compiler print out each function name as it is compiled, and print some statistics about each pass when it finishes.

-ftime-report
Makes the compiler print some statistics about the time consumed by each pass when it finishes.

-ftime-report-details
Record the time consumed by infrastructure parts separately for each pass.

-fira-verbose=n
Control the verbosity of the dump file for the integrated register allocator. The default value is 5. If the value n is greater or
equal to 10, the dump output is sent to stderr using the same format as n minus 10.

-flto-report
Prints a report with internal details on the workings of the link-time optimizer. The contents of this report vary from version to
version. It is meant to be useful to GCC developers when processing object files in LTO mode (via -flto).

Disabled by default.

-flto-report-wpa
Like -flto-report, but only print for the WPA phase of Link Time Optimization.

-fmem-report
Makes the compiler print some statistics about permanent memory allocation when it finishes.

-fmem-report-wpa
Makes the compiler print some statistics about permanent memory allocation for the WPA phase only.

-fpre-ipa-mem-report
-fpost-ipa-mem-report
Makes the compiler print some statistics about permanent memory allocation before or after interprocedural optimization.

-fprofile-report
Makes the compiler print some statistics about consistency of the (estimated) profile and effect of individual passes.

-fstack-usage
Makes the compiler output stack usage information for the program, on a per-function basis. The filename for the dump is made by
appending .su to the auxname. auxname is generated from the name of the output file, if explicitly specified and it is not an
executable, otherwise it is the basename of the source file. An entry is made up of three fields:

* The name of the function.

* A number of bytes.

* One or more qualifiers: "static", "dynamic", "bounded".

The qualifier "static" means that the function manipulates the stack statically: a fixed number of bytes are allocated for the frame on
function entry and released on function exit; no stack adjustments are otherwise made in the function. The second field is this fixed
number of bytes.

The qualifier "dynamic" means that the function manipulates the stack dynamically: in addition to the static allocation described
above, stack adjustments are made in the body of the function, for example to push/pop arguments around function calls. If the
qualifier "bounded" is also present, the amount of these adjustments is bounded at compile time and the second field is an upper bound
of the total amount of stack used by the function. If it is not present, the amount of these adjustments is not bounded at compile
time and the second field only represents the bounded part.

-fstats
Emit statistics about front-end processing at the end of the compilation. This option is supported only by the C++ front end, and the
information is generally only useful to the G++ development team.

-fdbg-cnt-list
Print the name and the counter upper bound for all debug counters.

-fdbg-cnt=counter-value-list
Set the internal debug counter upper bound. counter-value-list is a comma-separated list of name:value pairs which sets the upper
bound of each debug counter name to value. All debug counters have the initial upper bound of "UINT_MAX"; thus "dbg_cnt" returns true
always unless the upper bound is set by this option. For example, with -fdbg-cnt=dce:10,tail_call:0, "dbg_cnt(dce)" returns true only
for first 10 invocations.

-print-file-name=library
Print the full absolute name of the library file library that would be used when linking---and don't do anything else. With this
option, GCC does not compile or link anything; it just prints the file name.

-print-multi-directory
Print the directory name corresponding to the multilib selected by any other switches present in the command line. This directory is
supposed to exist in GCC_EXEC_PREFIX.

-print-multi-lib
Print the mapping from multilib directory names to compiler switches that enable them. The directory name is separated from the
switches by ;, and each switch starts with an @ instead of the -, without spaces between multiple switches. This is supposed to ease
shell processing.

-print-multi-os-directory
Print the path to OS libraries for the selected multilib, relative to some lib subdirectory. If OS libraries are present in the lib
subdirectory and no multilibs are used, this is usually just ., if OS libraries are present in libsuffix sibling directories this
prints e.g. ../lib64, ../lib or ../lib32, or if OS libraries are present in lib/subdir subdirectories it prints e.g. amd64, sparcv9 or
ev6.

-print-multiarch
Print the path to OS libraries for the selected multiarch, relative to some lib subdirectory.

-print-prog-name=program
Like -print-file-name, but searches for a program such as cpp.

-print-libgcc-file-name
Same as -print-file-name=libgcc.a.

This is useful when you use -nostdlib or -nodefaultlibs but you do want to link with libgcc.a. You can do:

gcc -nostdlib <files>... `gcc -print-libgcc-file-name`

-print-search-dirs
Print the name of the configured installation directory and a list of program and library directories gcc searches---and don't do
anything else.

This is useful when gcc prints the error message installation problem, cannot exec cpp0: No such file or directory. To resolve this
you either need to put cpp0 and the other compiler components where gcc expects to find them, or you can set the environment variable
GCC_EXEC_PREFIX to the directory where you installed them. Don't forget the trailing /.

-print-sysroot
Print the target sysroot directory that is used during compilation. This is the target sysroot specified either at configure time or
using the --sysroot option, possibly with an extra suffix that depends on compilation options. If no target sysroot is specified, the
option prints nothing.

-print-sysroot-headers-suffix
Print the suffix added to the target sysroot when searching for headers, or give an error if the compiler is not configured with such a
suffix---and don't do anything else.

-dumpmachine
Print the compiler's target machine (for example, i686-pc-linux-gnu)---and don't do anything else.

-dumpversion
Print the compiler version (for example, 3.0, 6.3.0 or 7)---and don't do anything else. This is the compiler version used in
filesystem paths, specs, can be depending on how the compiler has been configured just a single number (major version), two numbers
separated by dot (major and minor version) or three numbers separated by dots (major, minor and patchlevel version).

-dumpfullversion
Print the full compiler version, always 3 numbers separated by dots, major, minor and patchlevel version.

-dumpspecs
Print the compiler's built-in specs---and don't do anything else. (This is used when GCC itself is being built.)

Machine-Dependent Options
Each target machine supported by GCC can have its own options---for example, to allow you to compile for a particular processor variant or
ABI, or to control optimizations specific to that machine. By convention, the names of machine-specific options start with -m.

Some configurations of the compiler also support additional target-specific options, usually for compatibility with other compilers on the
same platform.

AArch64 Options

These options are defined for AArch64 implementations:

-mabi=name
Generate code for the specified data model. Permissible values are ilp32 for SysV-like data model where int, long int and pointers are
32 bits, and lp64 for SysV-like data model where int is 32 bits, but long int and pointers are 64 bits.

The default depends on the specific target configuration. Note that the LP64 and ILP32 ABIs are not link-compatible; you must compile
your entire program with the same ABI, and link with a compatible set of libraries.

-mbig-endian
Generate big-endian code. This is the default when GCC is configured for an aarch64_be-*-* target.

-mgeneral-regs-only
Generate code which uses only the general-purpose registers. This will prevent the compiler from using floating-point and Advanced
SIMD registers but will not impose any restrictions on the assembler.

-mlittle-endian
Generate little-endian code. This is the default when GCC is configured for an aarch64-*-* but not an aarch64_be-*-* target.

-mcmodel=tiny
Generate code for the tiny code model. The program and its statically defined symbols must be within 1MB of each other. Programs can
be statically or dynamically linked.

-mcmodel=small
Generate code for the small code model. The program and its statically defined symbols must be within 4GB of each other. Programs can
be statically or dynamically linked. This is the default code model.

-mcmodel=large
Generate code for the large code model. This makes no assumptions about addresses and sizes of sections. Programs can be statically
linked only.

-mstrict-align
Avoid generating memory accesses that may not be aligned on a natural object boundary as described in the architecture specification.

-momit-leaf-frame-pointer
-mno-omit-leaf-frame-pointer
Omit or keep the frame pointer in leaf functions. The former behavior is the default.

-mtls-dialect=desc
Use TLS descriptors as the thread-local storage mechanism for dynamic accesses of TLS variables. This is the default.

-mtls-dialect=traditional
Use traditional TLS as the thread-local storage mechanism for dynamic accesses of TLS variables.

-mtls-size=size
Specify bit size of immediate TLS offsets. Valid values are 12, 24, 32, 48. This option requires binutils 2.26 or newer.

-mfix-cortex-a53-835769
-mno-fix-cortex-a53-835769
Enable or disable the workaround for the ARM Cortex-A53 erratum number 835769. This involves inserting a NOP instruction between
memory instructions and 64-bit integer multiply-accumulate instructions.

-mfix-cortex-a53-843419
-mno-fix-cortex-a53-843419
Enable or disable the workaround for the ARM Cortex-A53 erratum number 843419. This erratum workaround is made at link time and this
will only pass the corresponding flag to the linker.

-mlow-precision-recip-sqrt
-mno-low-precision-recip-sqrt
Enable or disable the reciprocal square root approximation. This option only has an effect if -ffast-math or
-funsafe-math-optimizations is used as well. Enabling this reduces precision of reciprocal square root results to about 16 bits for
single precision and to 32 bits for double precision.

-mlow-precision-sqrt
-mno-low-precision-sqrt
Enable or disable the square root approximation. This option only has an effect if -ffast-math or -funsafe-math-optimizations is used
as well. Enabling this reduces precision of square root results to about 16 bits for single precision and to 32 bits for double
precision. If enabled, it implies -mlow-precision-recip-sqrt.

-mlow-precision-div
-mno-low-precision-div
Enable or disable the division approximation. This option only has an effect if -ffast-math or -funsafe-math-optimizations is used as
well. Enabling this reduces precision of division results to about 16 bits for single precision and to 32 bits for double precision.

-march=name
Specify the name of the target architecture and, optionally, one or more feature modifiers. This option has the form
-march=arch{+[no]feature}*.

The permissible values for arch are armv8-a, armv8.1-a, armv8.2-a, armv8.3-a or native.

The value armv8.3-a implies armv8.2-a and enables compiler support for the ARMv8.3-A architecture extensions.

The value armv8.2-a implies armv8.1-a and enables compiler support for the ARMv8.2-A architecture extensions.

The value armv8.1-a implies armv8-a and enables compiler support for the ARMv8.1-A architecture extension. In particular, it enables
the +crc and +lse features.

The value native is available on native AArch64 GNU/Linux and causes the compiler to pick the architecture of the host system. This
option has no effect if the compiler is unable to recognize the architecture of the host system,

The permissible values for feature are listed in the sub-section on aarch64-feature-modifiers,,-march and -mcpu Feature Modifiers.
Where conflicting feature modifiers are specified, the right-most feature is used.

GCC uses name to determine what kind of instructions it can emit when generating assembly code. If -march is specified without either
of -mtune or -mcpu also being specified, the code is tuned to perform well across a range of target processors implementing the target
architecture.

-mtune=name
Specify the name of the target processor for which GCC should tune the performance of the code. Permissible values for this option
are: generic, cortex-a35, cortex-a53, cortex-a57, cortex-a72, cortex-a73, exynos-m1, falkor, qdf24xx, xgene1, vulcan, thunderx,
thunderxt88, thunderxt88p1, thunderxt81, thunderxt83, thunderx2t99, cortex-a57.cortex-a53, cortex-a72.cortex-a53,
cortex-a73.cortex-a35, cortex-a73.cortex-a53, native.

The values cortex-a57.cortex-a53, cortex-a72.cortex-a53, cortex-a73.cortex-a35, cortex-a73.cortex-a53 specify that GCC should tune for
a big.LITTLE system.

Additionally on native AArch64 GNU/Linux systems the value native tunes performance to the host system. This option has no effect if
the compiler is unable to recognize the processor of the host system.

Where none of -mtune=, -mcpu= or -march= are specified, the code is tuned to perform well across a range of target processors.

This option cannot be suffixed by feature modifiers.

-mcpu=name
Specify the name of the target processor, optionally suffixed by one or more feature modifiers. This option has the form
-mcpu=cpu{+[no]feature}*, where the permissible values for cpu are the same as those available for -mtune. The permissible values for
feature are documented in the sub-section on aarch64-feature-modifiers,,-march and -mcpu Feature Modifiers. Where conflicting feature
modifiers are specified, the right-most feature is used.

GCC uses name to determine what kind of instructions it can emit when generating assembly code (as if by -march) and to determine the
target processor for which to tune for performance (as if by -mtune). Where this option is used in conjunction with -march or -mtune,
those options take precedence over the appropriate part of this option.

-moverride=string
Override tuning decisions made by the back-end in response to a -mtune= switch. The syntax, semantics, and accepted values for string
in this option are not guaranteed to be consistent across releases.

This option is only intended to be useful when developing GCC.

-mpc-relative-literal-loads
Enable PC-relative literal loads. With this option literal pools are accessed using a single instruction and emitted after each
function. This limits the maximum size of functions to 1MB. This is enabled by default for -mcmodel=tiny.

-msign-return-address=scope
Select the function scope on which return address signing will be applied. Permissible values are none, which disables return address
signing, non-leaf, which enables pointer signing for functions which are not leaf functions, and all, which enables pointer signing for
all functions. The default value is none.

-march and -mcpu Feature Modifiers

Feature modifiers used with -march and -mcpu can be any of the following and their inverses nofeature:

crc Enable CRC extension. This is on by default for -march=armv8.1-a.

crypto
Enable Crypto extension. This also enables Advanced SIMD and floating-point instructions.

fp Enable floating-point instructions. This is on by default for all possible values for options -march and -mcpu.

simd
Enable Advanced SIMD instructions. This also enables floating-point instructions. This is on by default for all possible values for
options -march and -mcpu.

lse Enable Large System Extension instructions. This is on by default for -march=armv8.1-a.

fp16
Enable FP16 extension. This also enables floating-point instructions.

Feature crypto implies simd, which implies fp. Conversely, nofp implies nosimd, which implies nocrypto.

Adapteva Epiphany Options

These -m options are defined for Adapteva Epiphany:

-mhalf-reg-file
Don't allocate any register in the range "r32"..."r63". That allows code to run on hardware variants that lack these registers.

-mprefer-short-insn-regs
Preferentially allocate registers that allow short instruction generation. This can result in increased instruction count, so this may
either reduce or increase overall code size.

-mbranch-cost=num
Set the cost of branches to roughly num "simple" instructions. This cost is only a heuristic and is not guaranteed to produce
consistent results across releases.

-mcmove
Enable the generation of conditional moves.

-mnops=num
Emit num NOPs before every other generated instruction.

-mno-soft-cmpsf
For single-precision floating-point comparisons, emit an "fsub" instruction and test the flags. This is faster than a software
comparison, but can get incorrect results in the presence of NaNs, or when two different small numbers are compared such that their
difference is calculated as zero. The default is -msoft-cmpsf, which uses slower, but IEEE-compliant, software comparisons.

-mstack-offset=num
Set the offset between the top of the stack and the stack pointer. E.g., a value of 8 means that the eight bytes in the range
"sp+0...sp+7" can be used by leaf functions without stack allocation. Values other than 8 or 16 are untested and unlikely to work.
Note also that this option changes the ABI; compiling a program with a different stack offset than the libraries have been compiled
with generally does not work. This option can be useful if you want to evaluate if a different stack offset would give you better
code, but to actually use a different stack offset to build working programs, it is recommended to configure the toolchain with the
appropriate --with-stack-offset=num option.

-mno-round-nearest
Make the scheduler assume that the rounding mode has been set to truncating. The default is -mround-nearest.

-mlong-calls
If not otherwise specified by an attribute, assume all calls might be beyond the offset range of the "b" / "bl" instructions, and
therefore load the function address into a register before performing a (otherwise direct) call. This is the default.

-mshort-calls
If not otherwise specified by an attribute, assume all direct calls are in the range of the "b" / "bl" instructions, so use these
instructions for direct calls. The default is -mlong-calls.

-msmall16
Assume addresses can be loaded as 16-bit unsigned values. This does not apply to function addresses for which -mlong-calls semantics
are in effect.

-mfp-mode=mode
Set the prevailing mode of the floating-point unit. This determines the floating-point mode that is provided and expected at function
call and return time. Making this mode match the mode you predominantly need at function start can make your programs smaller and
faster by avoiding unnecessary mode switches.

mode can be set to one the following values:

caller
Any mode at function entry is valid, and retained or restored when the function returns, and when it calls other functions. This
mode is useful for compiling libraries or other compilation units you might want to incorporate into different programs with
different prevailing FPU modes, and the convenience of being able to use a single object file outweighs the size and speed overhead
for any extra mode switching that might be needed, compared with what would be needed with a more specific choice of prevailing FPU
mode.

truncate
This is the mode used for floating-point calculations with truncating (i.e. round towards zero) rounding mode. That includes
conversion from floating point to integer.

round-nearest
This is the mode used for floating-point calculations with round-to-nearest-or-even rounding mode.

int This is the mode used to perform integer calculations in the FPU, e.g. integer multiply, or integer multiply-and-accumulate.

The default is -mfp-mode=caller

-mnosplit-lohi
-mno-postinc
-mno-postmodify
Code generation tweaks that disable, respectively, splitting of 32-bit loads, generation of post-increment addresses, and generation of
post-modify addresses. The defaults are msplit-lohi, -mpost-inc, and -mpost-modify.

-mnovect-double
Change the preferred SIMD mode to SImode. The default is -mvect-double, which uses DImode as preferred SIMD mode.

-max-vect-align=num
The maximum alignment for SIMD vector mode types. num may be 4 or 8. The default is 8. Note that this is an ABI change, even though
many library function interfaces are unaffected if they don't use SIMD vector modes in places that affect size and/or alignment of
relevant types.

-msplit-vecmove-early
Split vector moves into single word moves before reload. In theory this can give better register allocation, but so far the reverse
seems to be generally the case.

-m1reg-reg
Specify a register to hold the constant -1, which makes loading small negative constants and certain bitmasks faster. Allowable values
for reg are r43 and r63, which specify use of that register as a fixed register, and none, which means that no register is used for
this purpose. The default is -m1reg-none.

ARC Options

The following options control the architecture variant for which code is being compiled:

-mbarrel-shifter
Generate instructions supported by barrel shifter. This is the default unless -mcpu=ARC601 or -mcpu=ARCEM is in effect.

-mcpu=cpu
Set architecture type, register usage, and instruction scheduling parameters for cpu. There are also shortcut alias options available
for backward compatibility and convenience. Supported values for cpu are

arc600
Compile for ARC600. Aliases: -mA6, -mARC600.

arc601
Compile for ARC601. Alias: -mARC601.

arc700
Compile for ARC700. Aliases: -mA7, -mARC700. This is the default when configured with --with-cpu=arc700.

arcem
Compile for ARC EM.

archs
Compile for ARC HS.

em Compile for ARC EM CPU with no hardware extensions.

em4 Compile for ARC EM4 CPU.

em4_dmips
Compile for ARC EM4 DMIPS CPU.

em4_fpus
Compile for ARC EM4 DMIPS CPU with the single-precision floating-point extension.

em4_fpuda
Compile for ARC EM4 DMIPS CPU with single-precision floating-point and double assist instructions.

hs Compile for ARC HS CPU with no hardware extensions except the atomic instructions.

hs34
Compile for ARC HS34 CPU.

hs38
Compile for ARC HS38 CPU.

hs38_linux
Compile for ARC HS38 CPU with all hardware extensions on.

arc600_norm
Compile for ARC 600 CPU with "norm" instructions enabled.

arc600_mul32x16
Compile for ARC 600 CPU with "norm" and 32x16-bit multiply instructions enabled.

arc600_mul64
Compile for ARC 600 CPU with "norm" and "mul64"-family instructions enabled.

arc601_norm
Compile for ARC 601 CPU with "norm" instructions enabled.

arc601_mul32x16
Compile for ARC 601 CPU with "norm" and 32x16-bit multiply instructions enabled.

arc601_mul64
Compile for ARC 601 CPU with "norm" and "mul64"-family instructions enabled.

nps400
Compile for ARC 700 on NPS400 chip.

-mdpfp
-mdpfp-compact
Generate double-precision FPX instructions, tuned for the compact implementation.

-mdpfp-fast
Generate double-precision FPX instructions, tuned for the fast implementation.

-mno-dpfp-lrsr
Disable "lr" and "sr" instructions from using FPX extension aux registers.

-mea
Generate extended arithmetic instructions. Currently only "divaw", "adds", "subs", and "sat16" are supported. This is always enabled
for -mcpu=ARC700.

-mno-mpy
Do not generate "mpy"-family instructions for ARC700. This option is deprecated.

-mmul32x16
Generate 32x16-bit multiply and multiply-accumulate instructions.

-mmul64
Generate "mul64" and "mulu64" instructions. Only valid for -mcpu=ARC600.

-mnorm
Generate "norm" instructions. This is the default if -mcpu=ARC700 is in effect.

-mspfp
-mspfp-compact
Generate single-precision FPX instructions, tuned for the compact implementation.

-mspfp-fast
Generate single-precision FPX instructions, tuned for the fast implementation.

-msimd
Enable generation of ARC SIMD instructions via target-specific builtins. Only valid for -mcpu=ARC700.

-msoft-float
This option ignored; it is provided for compatibility purposes only. Software floating-point code is emitted by default, and this
default can overridden by FPX options; -mspfp, -mspfp-compact, or -mspfp-fast for single precision, and -mdpfp, -mdpfp-compact, or
-mdpfp-fast for double precision.

-mswap
Generate "swap" instructions.

-matomic
This enables use of the locked load/store conditional extension to implement atomic memory built-in functions. Not available for ARC
6xx or ARC EM cores.

-mdiv-rem
Enable "div" and "rem" instructions for ARCv2 cores.

-mcode-density
Enable code density instructions for ARC EM. This option is on by default for ARC HS.

-mll64
Enable double load/store operations for ARC HS cores.

-mtp-regno=regno
Specify thread pointer register number.

-mmpy-option=multo
Compile ARCv2 code with a multiplier design option. You can specify the option using either a string or numeric value for multo. wlh1
is the default value. The recognized values are:

0
none
No multiplier available.

1
w 16x16 multiplier, fully pipelined. The following instructions are enabled: "mpyw" and "mpyuw".

2
wlh1
32x32 multiplier, fully pipelined (1 stage). The following instructions are additionally enabled: "mpy", "mpyu", "mpym", "mpymu",
and "mpy_s".

3
wlh2
32x32 multiplier, fully pipelined (2 stages). The following instructions are additionally enabled: "mpy", "mpyu", "mpym", "mpymu",
and "mpy_s".

4
wlh3
Two 16x16 multipliers, blocking, sequential. The following instructions are additionally enabled: "mpy", "mpyu", "mpym", "mpymu",
and "mpy_s".

5
wlh4
One 16x16 multiplier, blocking, sequential. The following instructions are additionally enabled: "mpy", "mpyu", "mpym", "mpymu",
and "mpy_s".

6
wlh5
One 32x4 multiplier, blocking, sequential. The following instructions are additionally enabled: "mpy", "mpyu", "mpym", "mpymu",
and "mpy_s".

7
plus_dmpy
ARC HS SIMD support.

8
plus_macd
ARC HS SIMD support.

9
plus_qmacw
ARC HS SIMD support.

This option is only available for ARCv2 cores.

-mfpu=fpu
Enables support for specific floating-point hardware extensions for ARCv2 cores. Supported values for fpu are:

fpus
Enables support for single-precision floating-point hardware extensions.

fpud
Enables support for double-precision floating-point hardware extensions. The single-precision floating-point extension is also
enabled. Not available for ARC EM.

fpuda
Enables support for double-precision floating-point hardware extensions using double-precision assist instructions. The single-
precision floating-point extension is also enabled. This option is only available for ARC EM.

fpuda_div
Enables support for double-precision floating-point hardware extensions using double-precision assist instructions. The single-
precision floating-point, square-root, and divide extensions are also enabled. This option is only available for ARC EM.

fpuda_fma
Enables support for double-precision floating-point hardware extensions using double-precision assist instructions. The single-
precision floating-point and fused multiply and add hardware extensions are also enabled. This option is only available for ARC
EM.

fpuda_all
Enables support for double-precision floating-point hardware extensions using double-precision assist instructions. All single-
precision floating-point hardware extensions are also enabled. This option is only available for ARC EM.

fpus_div
Enables support for single-precision floating-point, square-root and divide hardware extensions.

fpud_div
Enables support for double-precision floating-point, square-root and divide hardware extensions. This option includes option
fpus_div. Not available for ARC EM.

fpus_fma
Enables support for single-precision floating-point and fused multiply and add hardware extensions.

fpud_fma
Enables support for double-precision floating-point and fused multiply and add hardware extensions. This option includes option
fpus_fma. Not available for ARC EM.

fpus_all
Enables support for all single-precision floating-point hardware extensions.

fpud_all
Enables support for all single- and double-precision floating-point hardware extensions. Not available for ARC EM.

The following options are passed through to the assembler, and also define preprocessor macro symbols.

-mdsp-packa
Passed down to the assembler to enable the DSP Pack A extensions. Also sets the preprocessor symbol "__Xdsp_packa". This option is
deprecated.

-mdvbf
Passed down to the assembler to enable the dual Viterbi butterfly extension. Also sets the preprocessor symbol "__Xdvbf". This option
is deprecated.

-mlock
Passed down to the assembler to enable the locked load/store conditional extension. Also sets the preprocessor symbol "__Xlock".

-mmac-d16
Passed down to the assembler. Also sets the preprocessor symbol "__Xxmac_d16". This option is deprecated.

-mmac-24
Passed down to the assembler. Also sets the preprocessor symbol "__Xxmac_24". This option is deprecated.

-mrtsc
Passed down to the assembler to enable the 64-bit time-stamp counter extension instruction. Also sets the preprocessor symbol
"__Xrtsc". This option is deprecated.

-mswape
Passed down to the assembler to enable the swap byte ordering extension instruction. Also sets the preprocessor symbol "__Xswape".

-mtelephony
Passed down to the assembler to enable dual- and single-operand instructions for telephony. Also sets the preprocessor symbol
"__Xtelephony". This option is deprecated.

-mxy
Passed down to the assembler to enable the XY memory extension. Also sets the preprocessor symbol "__Xxy".

The following options control how the assembly code is annotated:

-misize
Annotate assembler instructions with estimated addresses.

-mannotate-align
Explain what alignment considerations lead to the decision to make an instruction short or long.

The following options are passed through to the linker:

-marclinux
Passed through to the linker, to specify use of the "arclinux" emulation. This option is enabled by default in tool chains built for
"arc-linux-uclibc" and "arceb-linux-uclibc" targets when profiling is not requested.

-marclinux_prof
Passed through to the linker, to specify use of the "arclinux_prof" emulation. This option is enabled by default in tool chains built
for "arc-linux-uclibc" and "arceb-linux-uclibc" targets when profiling is requested.

The following options control the semantics of generated code:

-mlong-calls
Generate calls as register indirect calls, thus providing access to the full 32-bit address range.

-mmedium-calls
Don't use less than 25-bit addressing range for calls, which is the offset available for an unconditional branch-and-link instruction.
Conditional execution of function calls is suppressed, to allow use of the 25-bit range, rather than the 21-bit range with conditional
branch-and-link. This is the default for tool chains built for "arc-linux-uclibc" and "arceb-linux-uclibc" targets.

-mno-sdata
Do not generate sdata references. This is the default for tool chains built for "arc-linux-uclibc" and "arceb-linux-uclibc" targets.

-mvolatile-cache
Use ordinarily cached memory accesses for volatile references. This is the default.

-mno-volatile-cache
Enable cache bypass for volatile references.

The following options fine tune code generation:

-malign-call
Do alignment optimizations for call instructions.

-mauto-modify-reg
Enable the use of pre/post modify with register displacement.

-mbbit-peephole
Enable bbit peephole2.

-mno-brcc
This option disables a target-specific pass in arc_reorg to generate compare-and-branch ("brcc") instructions. It has no effect on
generation of these instructions driven by the combiner pass.

-mcase-vector-pcrel
Use PC-relative switch case tables to enable case table shortening. This is the default for -Os.

-mcompact-casesi
Enable compact "casesi" pattern. This is the default for -Os, and only available for ARCv1 cores.

-mno-cond-exec
Disable the ARCompact-specific pass to generate conditional execution instructions.

Due to delay slot scheduling and interactions between operand numbers, literal sizes, instruction lengths, and the support for
conditional execution, the target-independent pass to generate conditional execution is often lacking, so the ARC port has kept a
special pass around that tries to find more conditional execution generation opportunities after register allocation, branch
shortening, and delay slot scheduling have been done. This pass generally, but not always, improves performance and code size, at the
cost of extra compilation time, which is why there is an option to switch it off. If you have a problem with call instructions
exceeding their allowable offset range because they are conditionalized, you should consider using -mmedium-calls instead.

-mearly-cbranchsi
Enable pre-reload use of the "cbranchsi" pattern.

-mexpand-adddi
Expand "adddi3" and "subdi3" at RTL generation time into "add.f", "adc" etc.

-mindexed-loads
Enable the use of indexed loads. This can be problematic because some optimizers then assume that indexed stores exist, which is not
the case.

Enable Local Register Allocation. This is still experimental for ARC, so by default the compiler uses standard reload (i.e. -mno-lra).

-mlra-priority-none
Don't indicate any priority for target registers.

-mlra-priority-compact
Indicate target register priority for r0..r3 / r12..r15.

-mlra-priority-noncompact
Reduce target register priority for r0..r3 / r12..r15.

-mno-millicode
When optimizing for size (using -Os), prologues and epilogues that have to save or restore a large number of registers are often
shortened by using call to a special function in libgcc; this is referred to as a millicode call. As these calls can pose performance
issues, and/or cause linking issues when linking in a nonstandard way, this option is provided to turn off millicode call generation.

-mmixed-code
Tweak register allocation to help 16-bit instruction generation. This generally has the effect of decreasing the average instruction
size while increasing the instruction count.

-mq-class
Enable q instruction alternatives. This is the default for -Os.

-mRcq
Enable Rcq constraint handling. Most short code generation depends on this. This is the default.

-mRcw
Enable Rcw constraint handling. Most ccfsm condexec mostly depends on this. This is the default.

-msize-level=level
Fine-tune size optimization with regards to instruction lengths and alignment. The recognized values for level are:

0 No size optimization. This level is deprecated and treated like 1.

1 Short instructions are used opportunistically.

2 In addition, alignment of loops and of code after barriers are dropped.

3 In addition, optional data alignment is dropped, and the option Os is enabled.

This defaults to 3 when -Os is in effect. Otherwise, the behavior when this is not set is equivalent to level 1.

-mtune=cpu
Set instruction scheduling parameters for cpu, overriding any implied by -mcpu=.

Supported values for cpu are

ARC600
Tune for ARC600 CPU.

ARC601
Tune for ARC601 CPU.

ARC700
Tune for ARC700 CPU with standard multiplier block.

ARC700-xmac
Tune for ARC700 CPU with XMAC block.

ARC725D
Tune for ARC725D CPU.

ARC750D
Tune for ARC750D CPU.

-mmultcost=num
Cost to assume for a multiply instruction, with 4 being equal to a normal instruction.

-munalign-prob-threshold=probability
Set probability threshold for unaligning branches. When tuning for ARC700 and optimizing for speed, branches without filled delay slot
are preferably emitted unaligned and long, unless profiling indicates that the probability for the branch to be taken is below
probability. The default is (REG_BR_PROB_BASE/2), i.e. 5000.

The following options are maintained for backward compatibility, but are now deprecated and will be removed in a future release:

-margonaut
Obsolete FPX.

-mbig-endian
-EB Compile code for big-endian targets. Use of these options is now deprecated. Big-endian code is supported by configuring GCC to build
"arceb-elf32" and "arceb-linux-uclibc" targets, for which big endian is the default.

-mlittle-endian
-EL Compile code for little-endian targets. Use of these options is now deprecated. Little-endian code is supported by configuring GCC to
build "arc-elf32" and "arc-linux-uclibc" targets, for which little endian is the default.

-mbarrel_shifter
Replaced by -mbarrel-shifter.

-mdpfp_compact
Replaced by -mdpfp-compact.

-mdpfp_fast
Replaced by -mdpfp-fast.

-mdsp_packa
Replaced by -mdsp-packa.

-mEA
Replaced by -mea.

-mmac_24
Replaced by -mmac-24.

-mmac_d16
Replaced by -mmac-d16.

-mspfp_compact
Replaced by -mspfp-compact.

-mspfp_fast
Replaced by -mspfp-fast.

-mtune=cpu
Values arc600, arc601, arc700 and arc700-xmac for cpu are replaced by ARC600, ARC601, ARC700 and ARC700-xmac respectively.

-multcost=num
Replaced by -mmultcost.

ARM Options

These -m options are defined for the ARM port:

-mabi=name
Generate code for the specified ABI. Permissible values are: apcs-gnu, atpcs, aapcs, aapcs-linux and iwmmxt.

-mapcs-frame
Generate a stack frame that is compliant with the ARM Procedure Call Standard for all functions, even if this is not strictly necessary
for correct execution of the code. Specifying -fomit-frame-pointer with this option causes the stack frames not to be generated for
leaf functions. The default is -mno-apcs-frame. This option is deprecated.

-mapcs
This is a synonym for -mapcs-frame and is deprecated.

-mthumb-interwork
Generate code that supports calling between the ARM and Thumb instruction sets. Without this option, on pre-v5 architectures, the two
instruction sets cannot be reliably used inside one program. The default is -mno-thumb-interwork, since slightly larger code is
generated when -mthumb-interwork is specified. In AAPCS configurations this option is meaningless.

-mno-sched-prolog
Prevent the reordering of instructions in the function prologue, or the merging of those instruction with the instructions in the
function's body. This means that all functions start with a recognizable set of instructions (or in fact one of a choice from a small
set of different function prologues), and this information can be used to locate the start of functions inside an executable piece of
code. The default is -msched-prolog.

-mfloat-abi=name
Specifies which floating-point ABI to use. Permissible values are: soft, softfp and hard.

Specifying soft causes GCC to generate output containing library calls for floating-point operations. softfp allows the generation of
code using hardware floating-point instructions, but still uses the soft-float calling conventions. hard allows generation of
floating-point instructions and uses FPU-specific calling conventions.

The default depends on the specific target configuration. Note that the hard-float and soft-float ABIs are not link-compatible; you
must compile your entire program with the same ABI, and link with a compatible set of libraries.

-mlittle-endian
Generate code for a processor running in little-endian mode. This is the default for all standard configurations.

-mbig-endian
Generate code for a processor running in big-endian mode; the default is to compile code for a little-endian processor.

-march=name
This specifies the name of the target ARM architecture. GCC uses this name to determine what kind of instructions it can emit when
generating assembly code. This option can be used in conjunction with or instead of the -mcpu= option. Permissible names are: armv2,
armv2a, armv3, armv3m, armv4, armv4t, armv5, armv5e, armv5t, armv5te, armv6, armv6-m, armv6j, armv6k, armv6kz, armv6s-m, armv6t2,
armv6z, armv6zk, armv7, armv7-a, armv7-m, armv7-r, armv7e-m, armv7ve, armv8-a, armv8-a+crc, armv8.1-a, armv8.1-a+crc, armv8-m.base,
armv8-m.main, armv8-m.main+dsp, iwmmxt, iwmmxt2.

Architecture revisions older than armv4t are deprecated.

-march=armv6s-m is the armv6-m architecture with support for the (now mandatory) SVC instruction.

-march=armv6zk is an alias for armv6kz, existing for backwards compatibility.

-march=armv7ve is the armv7-a architecture with virtualization extensions.

-march=armv8-a+crc enables code generation for the ARMv8-A architecture together with the optional CRC32 extensions.

-march=armv8.1-a enables compiler support for the ARMv8.1-A architecture. This also enables the features provided by
-march=armv8-a+crc.

-march=armv8.2-a enables compiler support for the ARMv8.2-A architecture. This also enables the features provided by -march=armv8.1-a.

-march=armv8.2-a+fp16 enables compiler support for the ARMv8.2-A architecture with the optional FP16 instructions extension. This also
enables the features provided by -march=armv8.1-a and implies -mfp16-format=ieee.

-march=native causes the compiler to auto-detect the architecture of the build computer. At present, this feature is only supported on
GNU/Linux, and not all architectures are recognized. If the auto-detect is unsuccessful the option has no effect.

-mtune=name
This option specifies the name of the target ARM processor for which GCC should tune the performance of the code. For some ARM
implementations better performance can be obtained by using this option. Permissible names are: arm2, arm250, arm3, arm6, arm60,
arm600, arm610, arm620, arm7, arm7m, arm7d, arm7dm, arm7di, arm7dmi, arm70, arm700, arm700i, arm710, arm710c, arm7100, arm720, arm7500,
arm7500fe, arm7tdmi, arm7tdmi-s, arm710t, arm720t, arm740t, strongarm, strongarm110, strongarm1100, strongarm1110, arm8, arm810, arm9,
arm9e, arm920, arm920t, arm922t, arm946e-s, arm966e-s, arm968e-s, arm926ej-s, arm940t, arm9tdmi, arm10tdmi, arm1020t, arm1026ej-s,
arm10e, arm1020e, arm1022e, arm1136j-s, arm1136jf-s, mpcore, mpcorenovfp, arm1156t2-s, arm1156t2f-s, arm1176jz-s, arm1176jzf-s,
generic-armv7-a, cortex-a5, cortex-a7, cortex-a8, cortex-a9, cortex-a12, cortex-a15, cortex-a17, cortex-a32, cortex-a35, cortex-a53,
cortex-a57, cortex-a72, cortex-a73, cortex-r4, cortex-r4f, cortex-r5, cortex-r7, cortex-r8, cortex-m33, cortex-m23, cortex-m7,
cortex-m4, cortex-m3, cortex-m1, cortex-m0, cortex-m0plus, cortex-m1.small-multiply, cortex-m0.small-multiply,
cortex-m0plus.small-multiply, exynos-m1, marvell-pj4, xscale, iwmmxt, iwmmxt2, ep9312, fa526, fa626, fa606te, fa626te, fmp626, fa726te,
xgene1.

Additionally, this option can specify that GCC should tune the performance of the code for a big.LITTLE system. Permissible names are:
cortex-a15.cortex-a7, cortex-a17.cortex-a7, cortex-a57.cortex-a53, cortex-a72.cortex-a53, cortex-a72.cortex-a35, cortex-a73.cortex-a53.

-mtune=generic-arch specifies that GCC should tune the performance for a blend of processors within architecture arch. The aim is to
generate code that run well on the current most popular processors, balancing between optimizations that benefit some CPUs in the
range, and avoiding performance pitfalls of other CPUs. The effects of this option may change in future GCC versions as CPU models
come and go.

-mtune=native causes the compiler to auto-detect the CPU of the build computer. At present, this feature is only supported on
GNU/Linux, and not all architectures are recognized. If the auto-detect is unsuccessful the option has no effect.

-mcpu=name
This specifies the name of the target ARM processor. GCC uses this name to derive the name of the target ARM architecture (as if
specified by -march) and the ARM processor type for which to tune for performance (as if specified by -mtune). Where this option is
used in conjunction with -march or -mtune, those options take precedence over the appropriate part of this option.

Permissible names for this option are the same as those for -mtune.

-mcpu=generic-arch is also permissible, and is equivalent to -march=arch -mtune=generic-arch. See -mtune for more information.

-mcpu=native causes the compiler to auto-detect the CPU of the build computer. At present, this feature is only supported on
GNU/Linux, and not all architectures are recognized. If the auto-detect is unsuccessful the option has no effect.

-mfpu=name
This specifies what floating-point hardware (or hardware emulation) is available on the target. Permissible names are: vfpv2, vfpv3,
vfpv3-fp16, vfpv3-d16, vfpv3-d16-fp16, vfpv3xd, vfpv3xd-fp16, neon-vfpv3, neon-fp16, vfpv4, vfpv4-d16, fpv4-sp-d16, neon-vfpv4,
fpv5-d16, fpv5-sp-d16, fp-armv8, neon-fp-armv8 and crypto-neon-fp-armv8. Note that neon is an alias for neon-vfpv3 and vfp is an alias
for vfpv2.

If -msoft-float is specified this specifies the format of floating-point values.

If the selected floating-point hardware includes the NEON extension (e.g. -mfpu=neon), note that floating-point operations are not
generated by GCC's auto-vectorization pass unless -funsafe-math-optimizations is also specified. This is because NEON hardware does
not fully implement the IEEE 754 standard for floating-point arithmetic (in particular denormal values are treated as zero), so the use
of NEON instructions may lead to a loss of precision.

You can also set the fpu name at function level by using the "target("fpu=")" function attributes or pragmas.

-mfp16-format=name
Specify the format of the "__fp16" half-precision floating-point type. Permissible names are none, ieee, and alternative; the default
is none, in which case the "__fp16" type is not defined.

-mstructure-size-boundary=n
The sizes of all structures and unions are rounded up to a multiple of the number of bits set by this option. Permissible values are
8, 32 and 64. The default value varies for different toolchains. For the COFF targeted toolchain the default value is 8. A value of
64 is only allowed if the underlying ABI supports it.

Specifying a larger number can produce faster, more efficient code, but can also increase the size of the program. Different values
are potentially incompatible. Code compiled with one value cannot necessarily expect to work with code or libraries compiled with
another value, if they exchange information using structures or unions.

-mabort-on-noreturn
Generate a call to the function "abort" at the end of a "noreturn" function. It is executed if the function tries to return.

-mlong-calls
-mno-long-calls
Tells the compiler to perform function calls by first loading the address of the function into a register and then performing a
subroutine call on this register. This switch is needed if the target function lies outside of the 64-megabyte addressing range of the
offset-based version of subroutine call instruction.

Even if this switch is enabled, not all function calls are turned into long calls. The heuristic is that static functions, functions
that have the "short_call" attribute, functions that are inside the scope of a "#pragma no_long_calls" directive, and functions whose
definitions have already been compiled within the current compilation unit are not turned into long calls. The exceptions to this rule
are that weak function definitions, functions with the "long_call" attribute or the "section" attribute, and functions that are within
the scope of a "#pragma long_calls" directive are always turned into long calls.

This feature is not enabled by default. Specifying -mno-long-calls restores the default behavior, as does placing the function calls
within the scope of a "#pragma long_calls_off" directive. Note these switches have no effect on how the compiler generates code to
handle function calls via function pointers.

-msingle-pic-base
Treat the register used for PIC addressing as read-only, rather than loading it in the prologue for each function. The runtime system
is responsible for initializing this register with an appropriate value before execution begins.

-mpic-register=reg
Specify the register to be used for PIC addressing. For standard PIC base case, the default is any suitable register determined by
compiler. For single PIC base case, the default is R9 if target is EABI based or stack-checking is enabled, otherwise the default is
R10.

-mpic-data-is-text-relative
Assume that the displacement between the text and data segments is fixed at static link time. This permits using PC-relative
addressing operations to access data known to be in the data segment. For non-VxWorks RTP targets, this option is enabled by default.
When disabled on such targets, it will enable -msingle-pic-base by default.

-mpoke-function-name
Write the name of each function into the text section, directly preceding the function prologue. The generated code is similar to
this:

t0
.ascii "arm_poke_function_name", 0
.align
t1
.word 0xff000000 + (t1 - t0)
arm_poke_function_name
mov ip, sp
stmfd sp!, {fp, ip, lr, pc}
sub fp, ip, #4

When performing a stack backtrace, code can inspect the value of "pc" stored at "fp + 0". If the trace function then looks at location
"pc - 12" and the top 8 bits are set, then we know that there is a function name embedded immediately preceding this location and has
length "((pc[-3]) & 0xff000000)".

-mthumb
-marm
Select between generating code that executes in ARM and Thumb states. The default for most configurations is to generate code that
executes in ARM state, but the default can be changed by configuring GCC with the --with-mode=state configure option.

You can also override the ARM and Thumb mode for each function by using the "target("thumb")" and "target("arm")" function attributes
or pragmas.

-mtpcs-frame
Generate a stack frame that is compliant with the Thumb Procedure Call Standard for all non-leaf functions. (A leaf function is one
that does not call any other functions.) The default is -mno-tpcs-frame.

-mtpcs-leaf-frame
Generate a stack frame that is compliant with the Thumb Procedure Call Standard for all leaf functions. (A leaf function is one that
does not call any other functions.) The default is -mno-apcs-leaf-frame.

-mcallee-super-interworking
Gives all externally visible functions in the file being compiled an ARM instruction set header which switches to Thumb mode before
executing the rest of the function. This allows these functions to be called from non-interworking code. This option is not valid in
AAPCS configurations because interworking is enabled by default.

-mcaller-super-interworking
Allows calls via function pointers (including virtual functions) to execute correctly regardless of whether the target code has been
compiled for interworking or not. There is a small overhead in the cost of executing a function pointer if this option is enabled.
This option is not valid in AAPCS configurations because interworking is enabled by default.

-mtp=name
Specify the access model for the thread local storage pointer. The valid models are soft, which generates calls to "__aeabi_read_tp",
cp15, which fetches the thread pointer from "cp15" directly (supported in the arm6k architecture), and auto, which uses the best
available method for the selected processor. The default setting is auto.

-mtls-dialect=dialect
Specify the dialect to use for accessing thread local storage. Two dialects are supported---gnu and gnu2. The gnu dialect selects the
original GNU scheme for supporting local and global dynamic TLS models. The gnu2 dialect selects the GNU descriptor scheme, which
provides better performance for shared libraries. The GNU descriptor scheme is compatible with the original scheme, but does require
new assembler, linker and library support. Initial and local exec TLS models are unaffected by this option and always use the original
scheme.

-mword-relocations
Only generate absolute relocations on word-sized values (i.e. R_ARM_ABS32). This is enabled by default on targets (uClinux, SymbianOS)
where the runtime loader imposes this restriction, and when -fpic or -fPIC is specified.

-mfix-cortex-m3-ldrd
Some Cortex-M3 cores can cause data corruption when "ldrd" instructions with overlapping destination and base registers are used. This
option avoids generating these instructions. This option is enabled by default when -mcpu=cortex-m3 is specified.

-munaligned-access
-mno-unaligned-access
Enables (or disables) reading and writing of 16- and 32- bit values from addresses that are not 16- or 32- bit aligned. By default
unaligned access is disabled for all pre-ARMv6, all ARMv6-M and for ARMv8-M Baseline architectures, and enabled for all other
architectures. If unaligned access is not enabled then words in packed data structures are accessed a byte at a time.

The ARM attribute "Tag_CPU_unaligned_access" is set in the generated object file to either true or false, depending upon the setting of
this option. If unaligned access is enabled then the preprocessor symbol "__ARM_FEATURE_UNALIGNED" is also defined.

-mneon-for-64bits
Enables using Neon to handle scalar 64-bits operations. This is disabled by default since the cost of moving data from core registers
to Neon is high.

-mslow-flash-data
Assume loading data from flash is slower than fetching instruction. Therefore literal load is minimized for better performance. This
option is only supported when compiling for ARMv7 M-profile and off by default.

-masm-syntax-unified
Assume inline assembler is using unified asm syntax. The default is currently off which implies divided syntax. This option has no
impact on Thumb2. However, this may change in future releases of GCC. Divided syntax should be considered deprecated.

-mrestrict-it
Restricts generation of IT blocks to conform to the rules of ARMv8. IT blocks can only contain a single 16-bit instruction from a
select set of instructions. This option is on by default for ARMv8 Thumb mode.

-mprint-tune-info
Print CPU tuning information as comment in assembler file. This is an option used only for regression testing of the compiler and not
intended for ordinary use in compiling code. This option is disabled by default.

-mpure-code
Do not allow constant data to be placed in code sections. Additionally, when compiling for ELF object format give all text sections
the ELF processor-specific section attribute "SHF_ARM_PURECODE". This option is only available when generating non-pic code for
ARMv7-M targets.

-mcmse
Generate secure code as per the "ARMv8-M Security Extensions: Requirements on Development Tools Engineering Specification", which can
be found on
<http://infocenter.arm.com/help/topic/com.arm.doc.ecm0359818/ECM0359818_armv8m_security_extensions_reqs_on_dev_tools_1_0.pdf>.

AVR Options

These options are defined for AVR implementations:

-mmcu=mcu
Specify Atmel AVR instruction set architectures (ISA) or MCU type.

The default for this option is@tie{}avr2.

GCC supports the following AVR devices and ISAs:

"avr2"
"Classic" devices with up to 8@tie{}KiB of program memory. mcu@tie{}= "attiny22", "attiny26", "at90c8534", "at90s2313",
"at90s2323", "at90s2333", "at90s2343", "at90s4414", "at90s4433", "at90s4434", "at90s8515", "at90s8535".

"avr25"
"Classic" devices with up to 8@tie{}KiB of program memory and with the "MOVW" instruction. mcu@tie{}= "ata5272", "ata6616c",
"attiny13", "attiny13a", "attiny2313", "attiny2313a", "attiny24", "attiny24a", "attiny25", "attiny261", "attiny261a", "attiny43u",
"attiny4313", "attiny44", "attiny44a", "attiny441", "attiny45", "attiny461", "attiny461a", "attiny48", "attiny828", "attiny84",
"attiny84a", "attiny841", "attiny85", "attiny861", "attiny861a", "attiny87", "attiny88", "at86rf401".

"avr3"
"Classic" devices with 16@tie{}KiB up to 64@tie{}KiB of program memory. mcu@tie{}= "at43usb355", "at76c711".

"avr31"
"Classic" devices with 128@tie{}KiB of program memory. mcu@tie{}= "atmega103", "at43usb320".

"avr35"
"Classic" devices with 16@tie{}KiB up to 64@tie{}KiB of program memory and with the "MOVW" instruction. mcu@tie{}= "ata5505",
"ata6617c", "ata664251", "atmega16u2", "atmega32u2", "atmega8u2", "attiny1634", "attiny167", "at90usb162", "at90usb82".

"avr4"
"Enhanced" devices with up to 8@tie{}KiB of program memory. mcu@tie{}= "ata6285", "ata6286", "ata6289", "ata6612c", "atmega48",
"atmega48a", "atmega48p", "atmega48pa", "atmega48pb", "atmega8", "atmega8a", "atmega8hva", "atmega8515", "atmega8535", "atmega88",
"atmega88a", "atmega88p", "atmega88pa", "atmega88pb", "at90pwm1", "at90pwm2", "at90pwm2b", "at90pwm3", "at90pwm3b", "at90pwm81".

"avr5"
"Enhanced" devices with 16@tie{}KiB up to 64@tie{}KiB of program memory. mcu@tie{}= "ata5702m322", "ata5782", "ata5790",
"ata5790n", "ata5791", "ata5795", "ata5831", "ata6613c", "ata6614q", "ata8210", "ata8510", "atmega16", "atmega16a", "atmega16hva",
"atmega16hva2", "atmega16hvb", "atmega16hvbrevb", "atmega16m1", "atmega16u4", "atmega161", "atmega162", "atmega163", "atmega164a",
"atmega164p", "atmega164pa", "atmega165", "atmega165a", "atmega165p", "atmega165pa", "atmega168", "atmega168a", "atmega168p",
"atmega168pa", "atmega168pb", "atmega169", "atmega169a", "atmega169p", "atmega169pa", "atmega32", "atmega32a", "atmega32c1",
"atmega32hvb", "atmega32hvbrevb", "atmega32m1", "atmega32u4", "atmega32u6", "atmega323", "atmega324a", "atmega324p", "atmega324pa",
"atmega325", "atmega325a", "atmega325p", "atmega325pa", "atmega3250", "atmega3250a", "atmega3250p", "atmega3250pa", "atmega328",
"atmega328p", "atmega328pb", "atmega329", "atmega329a", "atmega329p", "atmega329pa", "atmega3290", "atmega3290a", "atmega3290p",
"atmega3290pa", "atmega406", "atmega64", "atmega64a", "atmega64c1", "atmega64hve", "atmega64hve2", "atmega64m1", "atmega64rfr2",
"atmega640", "atmega644", "atmega644a", "atmega644p", "atmega644pa", "atmega644rfr2", "atmega645", "atmega645a", "atmega645p",
"atmega6450", "atmega6450a", "atmega6450p", "atmega649", "atmega649a", "atmega649p", "atmega6490", "atmega6490a", "atmega6490p",
"at90can32", "at90can64", "at90pwm161", "at90pwm216", "at90pwm316", "at90scr100", "at90usb646", "at90usb647", "at94k", "m3000".

"avr51"
"Enhanced" devices with 128@tie{}KiB of program memory. mcu@tie{}= "atmega128", "atmega128a", "atmega128rfa1", "atmega128rfr2",
"atmega1280", "atmega1281", "atmega1284", "atmega1284p", "atmega1284rfr2", "at90can128", "at90usb1286", "at90usb1287".

"avr6"
"Enhanced" devices with 3-byte PC, i.e. with more than 128@tie{}KiB of program memory. mcu@tie{}= "atmega256rfr2", "atmega2560",
"atmega2561", "atmega2564rfr2".

"avrxmega2"
"XMEGA" devices with more than 8@tie{}KiB and up to 64@tie{}KiB of program memory. mcu@tie{}= "atxmega16a4", "atxmega16a4u",
"atxmega16c4", "atxmega16d4", "atxmega16e5", "atxmega32a4", "atxmega32a4u", "atxmega32c3", "atxmega32c4", "atxmega32d3",
"atxmega32d4", "atxmega32e5", "atxmega8e5".

"avrxmega4"
"XMEGA" devices with more than 64@tie{}KiB and up to 128@tie{}KiB of program memory. mcu@tie{}= "atxmega64a3", "atxmega64a3u",
"atxmega64a4u", "atxmega64b1", "atxmega64b3", "atxmega64c3", "atxmega64d3", "atxmega64d4".

"avrxmega5"
"XMEGA" devices with more than 64@tie{}KiB and up to 128@tie{}KiB of program memory and more than 64@tie{}KiB of RAM. mcu@tie{}=
"atxmega64a1", "atxmega64a1u".

"avrxmega6"
"XMEGA" devices with more than 128@tie{}KiB of program memory. mcu@tie{}= "atxmega128a3", "atxmega128a3u", "atxmega128b1",
"atxmega128b3", "atxmega128c3", "atxmega128d3", "atxmega128d4", "atxmega192a3", "atxmega192a3u", "atxmega192c3", "atxmega192d3",
"atxmega256a3", "atxmega256a3b", "atxmega256a3bu", "atxmega256a3u", "atxmega256c3", "atxmega256d3", "atxmega384c3", "atxmega384d3".

"avrxmega7"
"XMEGA" devices with more than 128@tie{}KiB of program memory and more than 64@tie{}KiB of RAM. mcu@tie{}= "atxmega128a1",
"atxmega128a1u", "atxmega128a4u".

"avrtiny"
"TINY" Tiny core devices with 512@tie{}B up to 4@tie{}KiB of program memory. mcu@tie{}= "attiny10", "attiny20", "attiny4",
"attiny40", "attiny5", "attiny9".

"avr1"
This ISA is implemented by the minimal AVR core and supported for assembler only. mcu@tie{}= "attiny11", "attiny12", "attiny15",
"attiny28", "at90s1200".

-mabsdata
Assume that all data in static storage can be accessed by LDS / STS instructions. This option has only an effect on reduced Tiny
devices like ATtiny40. See also the "absdata" AVR Variable Attributes,variable attribute.

-maccumulate-args
Accumulate outgoing function arguments and acquire/release the needed stack space for outgoing function arguments once in function
prologue/epilogue. Without this option, outgoing arguments are pushed before calling a function and popped afterwards.

Popping the arguments after the function call can be expensive on AVR so that accumulating the stack space might lead to smaller
executables because arguments need not be removed from the stack after such a function call.

This option can lead to reduced code size for functions that perform several calls to functions that get their arguments on the stack
like calls to printf-like functions.

-mbranch-cost=cost
Set the branch costs for conditional branch instructions to cost. Reasonable values for cost are small, non-negative integers. The
default branch cost is 0.

-mcall-prologues
Functions prologues/epilogues are expanded as calls to appropriate subroutines. Code size is smaller.

-mint8
Assume "int" to be 8-bit integer. This affects the sizes of all types: a "char" is 1 byte, an "int" is 1 byte, a "long" is 2 bytes,
and "long long" is 4 bytes. Please note that this option does not conform to the C standards, but it results in smaller code size.

-mn-flash=num
Assume that the flash memory has a size of num times 64@tie{}KiB.

-mno-interrupts
Generated code is not compatible with hardware interrupts. Code size is smaller.

-mrelax
Try to replace "CALL" resp. "JMP" instruction by the shorter "RCALL" resp. "RJMP" instruction if applicable. Setting -mrelax just adds
the --mlink-relax option to the assembler's command line and the --relax option to the linker's command line.

Jump relaxing is performed by the linker because jump offsets are not known before code is located. Therefore, the assembler code
generated by the compiler is the same, but the instructions in the executable may differ from instructions in the assembler code.

Relaxing must be turned on if linker stubs are needed, see the section on "EIND" and linker stubs below.

-mrmw
Assume that the device supports the Read-Modify-Write instructions "XCH", "LAC", "LAS" and "LAT".

-msp8
Treat the stack pointer register as an 8-bit register, i.e. assume the high byte of the stack pointer is zero. In general, you don't
need to set this option by hand.

This option is used internally by the compiler to select and build multilibs for architectures "avr2" and "avr25". These architectures
mix devices with and without "SPH". For any setting other than -mmcu=avr2 or -mmcu=avr25 the compiler driver adds or removes this
option from the compiler proper's command line, because the compiler then knows if the device or architecture has an 8-bit stack
pointer and thus no "SPH" register or not.

-mstrict-X
Use address register "X" in a way proposed by the hardware. This means that "X" is only used in indirect, post-increment or pre-
decrement addressing.

Without this option, the "X" register may be used in the same way as "Y" or "Z" which then is emulated by additional instructions. For
example, loading a value with "X+const" addressing with a small non-negative "const < 64" to a register Rn is performed as

adiw r26, const ; X += const
ld <Rn>, X ; <Rn> = *X
sbiw r26, const ; X -= const

-mtiny-stack
Only change the lower 8@tie{}bits of the stack pointer.

-mfract-convert-truncate
Allow to use truncation instead of rounding towards zero for fractional fixed-point types.

-nodevicelib
Don't link against AVR-LibC's device specific library "lib<mcu>.a".

-Waddr-space-convert
Warn about conversions between address spaces in the case where the resulting address space is not contained in the incoming address
space.

-Wmisspelled-isr
Warn if the ISR is misspelled, i.e. without __vector prefix. Enabled by default.

"EIND" and Devices with More Than 128 Ki Bytes of Flash

Pointers in the implementation are 16@tie{}bits wide. The address of a function or label is represented as word address so that indirect
jumps and calls can target any code address in the range of 64@tie{}Ki words.

In order to facilitate indirect jump on devices with more than 128@tie{}Ki bytes of program memory space, there is a special function
register called "EIND" that serves as most significant part of the target address when "EICALL" or "EIJMP" instructions are used.

Indirect jumps and calls on these devices are handled as follows by the compiler and are subject to some limitations:

* The compiler never sets "EIND".

* The compiler uses "EIND" implicitly in "EICALL"/"EIJMP" instructions or might read "EIND" directly in order to emulate an indirect
call/jump by means of a "RET" instruction.

* The compiler assumes that "EIND" never changes during the startup code or during the application. In particular, "EIND" is not
saved/restored in function or interrupt service routine prologue/epilogue.

* For indirect calls to functions and computed goto, the linker generates stubs. Stubs are jump pads sometimes also called trampolines.
Thus, the indirect call/jump jumps to such a stub. The stub contains a direct jump to the desired address.

* Linker relaxation must be turned on so that the linker generates the stubs correctly in all situations. See the compiler option -mrelax
and the linker option --relax. There are corner cases where the linker is supposed to generate stubs but aborts without relaxation and
without a helpful error message.

* The default linker script is arranged for code with "EIND = 0". If code is supposed to work for a setup with "EIND != 0", a custom
linker script has to be used in order to place the sections whose name start with ".trampolines" into the segment where "EIND" points
to.

* The startup code from libgcc never sets "EIND". Notice that startup code is a blend of code from libgcc and AVR-LibC. For the impact
of AVR-LibC on "EIND", see the AVR-LibC user manual ("http://nongnu.org/avr-libc/user-manual/").

* It is legitimate for user-specific startup code to set up "EIND" early, for example by means of initialization code located in section
".init3". Such code runs prior to general startup code that initializes RAM and calls constructors, but after the bit of startup code
from AVR-LibC that sets "EIND" to the segment where the vector table is located.

#include <avr/io.h>

static void
__attribute__((section(".init3"),naked,used,no_instrument_function))
init3_set_eind (void)
{
__asm volatile ("ldi r24,pm_hh8(__trampolines_start)
"
"out %i0,r24" :: "n" (&EIND) : "r24","memory");
}

The "__trampolines_start" symbol is defined in the linker script.

* Stubs are generated automatically by the linker if the following two conditions are met:

-<The address of a label is taken by means of the "gs" modifier>
(short for generate stubs) like so:

LDI r24, lo8(gs(<func>))
LDI r25, hi8(gs(<func>))

-<The final location of that label is in a code segment>
outside the segment where the stubs are located.

* The compiler emits such "gs" modifiers for code labels in the following situations:

-<Taking address of a function or code label.>
-<Computed goto.>
-<If prologue-save function is used, see -mcall-prologues>
command-line option.

-<Switch/case dispatch tables. If you do not want such dispatch>
tables you can specify the -fno-jump-tables command-line option.

-<C and C++ constructors/destructors called during startup/shutdown.>
-<If the tools hit a "gs()" modifier explained above.>
* Jumping to non-symbolic addresses like so is not supported:

int main (void)
{
/* Call function at word address 0x2 */
return ((int(*)(void)) 0x2)();
}

Instead, a stub has to be set up, i.e. the function has to be called through a symbol ("func_4" in the example):

int main (void)
{
extern int func_4 (void);

/* Call function at byte address 0x4 */
return func_4();
}

and the application be linked with -Wl,--defsym,func_4=0x4. Alternatively, "func_4" can be defined in the linker script.

Handling of the "RAMPD", "RAMPX", "RAMPY" and "RAMPZ" Special Function Registers

Some AVR devices support memories larger than the 64@tie{}KiB range that can be accessed with 16-bit pointers. To access memory locations
outside this 64@tie{}KiB range, the content of a "RAMP" register is used as high part of the address: The "X", "Y", "Z" address register is
concatenated with the "RAMPX", "RAMPY", "RAMPZ" special function register, respectively, to get a wide address. Similarly, "RAMPD" is used
together with direct addressing.

* The startup code initializes the "RAMP" special function registers with zero.

* If a AVR Named Address Spaces,named address space other than generic or "__flash" is used, then "RAMPZ" is set as needed before the
operation.

* If the device supports RAM larger than 64@tie{}KiB and the compiler needs to change "RAMPZ" to accomplish an operation, "RAMPZ" is
reset to zero after the operation.

* If the device comes with a specific "RAMP" register, the ISR prologue/epilogue saves/restores that SFR and initializes it with zero in
case the ISR code might (implicitly) use it.

* RAM larger than 64@tie{}KiB is not supported by GCC for AVR targets. If you use inline assembler to read from locations outside the
16-bit address range and change one of the "RAMP" registers, you must reset it to zero after the access.

AVR Built-in Macros

GCC defines several built-in macros so that the user code can test for the presence or absence of features. Almost any of the following
built-in macros are deduced from device capabilities and thus triggered by the -mmcu= command-line option.

For even more AVR-specific built-in macros see AVR Named Address Spaces and AVR Built-in Functions.

"__AVR_ARCH__"
Build-in macro that resolves to a decimal number that identifies the architecture and depends on the -mmcu=mcu option. Possible values
are:

2, 25, 3, 31, 35, 4, 5, 51, 6

for mcu="avr2", "avr25", "avr3", "avr31", "avr35", "avr4", "avr5", "avr51", "avr6",

respectively and

100, 102, 104, 105, 106, 107

for mcu="avrtiny", "avrxmega2", "avrxmega4", "avrxmega5", "avrxmega6", "avrxmega7", respectively. If mcu specifies a device, this
built-in macro is set accordingly. For example, with -mmcu=atmega8 the macro is defined to 4.

"__AVR_Device__"
Setting -mmcu=device defines this built-in macro which reflects the device's name. For example, -mmcu=atmega8 defines the built-in
macro "__AVR_ATmega8__", -mmcu=attiny261a defines "__AVR_ATtiny261A__", etc.

The built-in macros' names follow the scheme "__AVR_Device__" where Device is the device name as from the AVR user manual. The
difference between Device in the built-in macro and device in -mmcu=device is that the latter is always lowercase.

If device is not a device but only a core architecture like avr51, this macro is not defined.

"__AVR_DEVICE_NAME__"
Setting -mmcu=device defines this built-in macro to the device's name. For example, with -mmcu=atmega8 the macro is defined to
"atmega8".

If device is not a device but only a core architecture like avr51, this macro is not defined.

"__AVR_XMEGA__"
The device / architecture belongs to the XMEGA family of devices.

"__AVR_HAVE_ELPM__"
The device has the "ELPM" instruction.

"__AVR_HAVE_ELPMX__"
The device has the "ELPM Rn,Z" and "ELPM Rn,Z+" instructions.

"__AVR_HAVE_MOVW__"
The device has the "MOVW" instruction to perform 16-bit register-register moves.

"__AVR_HAVE_LPMX__"
The device has the "LPM Rn,Z" and "LPM Rn,Z+" instructions.

"__AVR_HAVE_MUL__"
The device has a hardware multiplier.

"__AVR_HAVE_JMP_CALL__"
The device has the "JMP" and "CALL" instructions. This is the case for devices with at least 16@tie{}KiB of program memory.

"__AVR_HAVE_EIJMP_EICALL__"
"__AVR_3_BYTE_PC__"
The device has the "EIJMP" and "EICALL" instructions. This is the case for devices with more than 128@tie{}KiB of program memory.
This also means that the program counter (PC) is 3@tie{}bytes wide.

"__AVR_2_BYTE_PC__"
The program counter (PC) is 2@tie{}bytes wide. This is the case for devices with up to 128@tie{}KiB of program memory.

"__AVR_HAVE_8BIT_SP__"
"__AVR_HAVE_16BIT_SP__"
The stack pointer (SP) register is treated as 8-bit respectively 16-bit register by the compiler. The definition of these macros is
affected by -mtiny-stack.

"__AVR_HAVE_SPH__"
"__AVR_SP8__"
The device has the SPH (high part of stack pointer) special function register or has an 8-bit stack pointer, respectively. The
definition of these macros is affected by -mmcu= and in the cases of -mmcu=avr2 and -mmcu=avr25 also by -msp8.

"__AVR_HAVE_RAMPD__"
"__AVR_HAVE_RAMPX__"
"__AVR_HAVE_RAMPY__"
"__AVR_HAVE_RAMPZ__"
The device has the "RAMPD", "RAMPX", "RAMPY", "RAMPZ" special function register, respectively.

"__NO_INTERRUPTS__"
This macro reflects the -mno-interrupts command-line option.

"__AVR_ERRATA_SKIP__"
"__AVR_ERRATA_SKIP_JMP_CALL__"
Some AVR devices (AT90S8515, ATmega103) must not skip 32-bit instructions because of a hardware erratum. Skip instructions are "SBRS",
"SBRC", "SBIS", "SBIC" and "CPSE". The second macro is only defined if "__AVR_HAVE_JMP_CALL__" is also set.

"__AVR_ISA_RMW__"
The device has Read-Modify-Write instructions (XCH, LAC, LAS and LAT).

"__AVR_SFR_OFFSET__=offset"
Instructions that can address I/O special function registers directly like "IN", "OUT", "SBI", etc. may use a different address as if
addressed by an instruction to access RAM like "LD" or "STS". This offset depends on the device architecture and has to be subtracted
from the RAM address in order to get the respective I/O@tie{}address.

"__WITH_AVRLIBC__"
The compiler is configured to be used together with AVR-Libc. See the --with-avrlibc configure option.

Blackfin Options

-mcpu=cpu[-sirevision]
Specifies the name of the target Blackfin processor. Currently, cpu can be one of bf512, bf514, bf516, bf518, bf522, bf523, bf524,
bf525, bf526, bf527, bf531, bf532, bf533, bf534, bf536, bf537, bf538, bf539, bf542, bf544, bf547, bf548, bf549, bf542m, bf544m, bf547m,
bf548m, bf549m, bf561, bf592.

The optional sirevision specifies the silicon revision of the target Blackfin processor. Any workarounds available for the targeted
silicon revision are enabled. If sirevision is none, no workarounds are enabled. If sirevision is any, all workarounds for the
targeted processor are enabled. The "__SILICON_REVISION__" macro is defined to two hexadecimal digits representing the major and minor
numbers in the silicon revision. If sirevision is none, the "__SILICON_REVISION__" is not defined. If sirevision is any, the
"__SILICON_REVISION__" is defined to be 0xffff. If this optional sirevision is not used, GCC assumes the latest known silicon revision
of the targeted Blackfin processor.

GCC defines a preprocessor macro for the specified cpu. For the bfin-elf toolchain, this option causes the hardware BSP provided by
libgloss to be linked in if -msim is not given.

Without this option, bf532 is used as the processor by default.

Note that support for bf561 is incomplete. For bf561, only the preprocessor macro is defined.

-msim
Specifies that the program will be run on the simulator. This causes the simulator BSP provided by libgloss to be linked in. This
option has effect only for bfin-elf toolchain. Certain other options, such as -mid-shared-library and -mfdpic, imply -msim.

-momit-leaf-frame-pointer
Don't keep the frame pointer in a register for leaf functions. This avoids the instructions to save, set up and restore frame pointers
and makes an extra register available in leaf functions. The option -fomit-frame-pointer removes the frame pointer for all functions,
which might make debugging harder.

-mspecld-anomaly
When enabled, the compiler ensures that the generated code does not contain speculative loads after jump instructions. If this option
is used, "__WORKAROUND_SPECULATIVE_LOADS" is defined.

-mno-specld-anomaly
Don't generate extra code to prevent speculative loads from occurring.

-mcsync-anomaly
When enabled, the compiler ensures that the generated code does not contain CSYNC or SSYNC instructions too soon after conditional
branches. If this option is used, "__WORKAROUND_SPECULATIVE_SYNCS" is defined.

-mno-csync-anomaly
Don't generate extra code to prevent CSYNC or SSYNC instructions from occurring too soon after a conditional branch.

-mlow-64k
When enabled, the compiler is free to take advantage of the knowledge that the entire program fits into the low 64k of memory.

-mno-low-64k
Assume that the program is arbitrarily large. This is the default.

-mstack-check-l1
Do stack checking using information placed into L1 scratchpad memory by the uClinux kernel.

-mid-shared-library
Generate code that supports shared libraries via the library ID method. This allows for execute in place and shared libraries in an
environment without virtual memory management. This option implies -fPIC. With a bfin-elf target, this option implies -msim.

-mno-id-shared-library
Generate code that doesn't assume ID-based shared libraries are being used. This is the default.

-mleaf-id-shared-library
Generate code that supports shared libraries via the library ID method, but assumes that this library or executable won't link against
any other ID shared libraries. That allows the compiler to use faster code for jumps and calls.

-mno-leaf-id-shared-library
Do not assume that the code being compiled won't link against any ID shared libraries. Slower code is generated for jump and call
insns.

-mshared-library-id=n
Specifies the identification number of the ID-based shared library being compiled. Specifying a value of 0 generates more compact
code; specifying other values forces the allocation of that number to the current library but is no more space- or time-efficient than
omitting this option.

-msep-data
Generate code that allows the data segment to be located in a different area of memory from the text segment. This allows for execute
in place in an environment without virtual memory management by eliminating relocations against the text section.

-mno-sep-data
Generate code that assumes that the data segment follows the text segment. This is the default.

-mlong-calls
-mno-long-calls
Tells the compiler to perform function calls by first loading the address of the function into a register and then performing a
subroutine call on this register. This switch is needed if the target function lies outside of the 24-bit addressing range of the
offset-based version of subroutine call instruction.

This feature is not enabled by default. Specifying -mno-long-calls restores the default behavior. Note these switches have no effect
on how the compiler generates code to handle function calls via function pointers.

-mfast-fp
Link with the fast floating-point library. This library relaxes some of the IEEE floating-point standard's rules for checking inputs
against Not-a-Number (NAN), in the interest of performance.

-minline-plt
Enable inlining of PLT entries in function calls to functions that are not known to bind locally. It has no effect without -mfdpic.

-mmulticore
Build a standalone application for multicore Blackfin processors. This option causes proper start files and link scripts supporting
multicore to be used, and defines the macro "__BFIN_MULTICORE". It can only be used with -mcpu=bf561[-sirevision].

This option can be used with -mcorea or -mcoreb, which selects the one-application-per-core programming model. Without -mcorea or
-mcoreb, the single-application/dual-core programming model is used. In this model, the main function of Core B should be named as
"coreb_main".

If this option is not used, the single-core application programming model is used.

-mcorea
Build a standalone application for Core A of BF561 when using the one-application-per-core programming model. Proper start files and
link scripts are used to support Core A, and the macro "__BFIN_COREA" is defined. This option can only be used in conjunction with
-mmulticore.

-mcoreb
Build a standalone application for Core B of BF561 when using the one-application-per-core programming model. Proper start files and
link scripts are used to support Core B, and the macro "__BFIN_COREB" is defined. When this option is used, "coreb_main" should be used
instead of "main". This option can only be used in conjunction with -mmulticore.

-msdram
Build a standalone application for SDRAM. Proper start files and link scripts are used to put the application into SDRAM, and the macro
"__BFIN_SDRAM" is defined. The loader should initialize SDRAM before loading the application.

-micplb
Assume that ICPLBs are enabled at run time. This has an effect on certain anomaly workarounds. For Linux targets, the default is to
assume ICPLBs are enabled; for standalone applications the default is off.

C6X Options

-march=name
This specifies the name of the target architecture. GCC uses this name to determine what kind of instructions it can emit when
generating assembly code. Permissible names are: c62x, c64x, c64x+, c67x, c67x+, c674x.

-mbig-endian
Generate code for a big-endian target.

-mlittle-endian
Generate code for a little-endian target. This is the default.

-msim
Choose startup files and linker script suitable for the simulator.

-msdata=default
Put small global and static data in the ".neardata" section, which is pointed to by register "B14". Put small uninitialized global and
static data in the ".bss" section, which is adjacent to the ".neardata" section. Put small read-only data into the ".rodata" section.
The corresponding sections used for large pieces of data are ".fardata", ".far" and ".const".

-msdata=all
Put all data, not just small objects, into the sections reserved for small data, and use addressing relative to the "B14" register to
access them.

-msdata=none
Make no use of the sections reserved for small data, and use absolute addresses to access all data. Put all initialized global and
static data in the ".fardata" section, and all uninitialized data in the ".far" section. Put all constant data into the ".const"
section.

CRIS Options

These options are defined specifically for the CRIS ports.

-march=architecture-type
-mcpu=architecture-type
Generate code for the specified architecture. The choices for architecture-type are v3, v8 and v10 for respectively ETRAX 4,
ETRAX 100, and ETRAX 100 LX. Default is v0 except for cris-axis-linux-gnu, where the default is v10.

-mtune=architecture-type
Tune to architecture-type everything applicable about the generated code, except for the ABI and the set of available instructions.
The choices for architecture-type are the same as for -march=architecture-type.

-mmax-stack-frame=n
Warn when the stack frame of a function exceeds n bytes.

-metrax4
-metrax100
The options -metrax4 and -metrax100 are synonyms for -march=v3 and -march=v8 respectively.

-mmul-bug-workaround
-mno-mul-bug-workaround
Work around a bug in the "muls" and "mulu" instructions for CPU models where it applies. This option is active by default.

-mpdebug
Enable CRIS-specific verbose debug-related information in the assembly code. This option also has the effect of turning off the
#NO_APP formatted-code indicator to the assembler at the beginning of the assembly file.

-mcc-init
Do not use condition-code results from previous instruction; always emit compare and test instructions before use of condition codes.

-mno-side-effects
Do not emit instructions with side effects in addressing modes other than post-increment.

-mstack-align
-mno-stack-align
-mdata-align
-mno-data-align
-mconst-align
-mno-const-align
These options (no- options) arrange (eliminate arrangements) for the stack frame, individual data and constants to be aligned for the
maximum single data access size for the chosen CPU model. The default is to arrange for 32-bit alignment. ABI details such as
structure layout are not affected by these options.

-m32-bit
-m16-bit
-m8-bit
Similar to the stack- data- and const-align options above, these options arrange for stack frame, writable data and constants to all be
32-bit, 16-bit or 8-bit aligned. The default is 32-bit alignment.

-mno-prologue-epilogue
-mprologue-epilogue
With -mno-prologue-epilogue, the normal function prologue and epilogue which set up the stack frame are omitted and no return
instructions or return sequences are generated in the code. Use this option only together with visual inspection of the compiled code:
no warnings or errors are generated when call-saved registers must be saved, or storage for local variables needs to be allocated.

-mno-gotplt
-mgotplt
With -fpic and -fPIC, don't generate (do generate) instruction sequences that load addresses for functions from the PLT part of the GOT
rather than (traditional on other architectures) calls to the PLT. The default is -mgotplt.

-melf
Legacy no-op option only recognized with the cris-axis-elf and cris-axis-linux-gnu targets.

-mlinux
Legacy no-op option only recognized with the cris-axis-linux-gnu target.

-sim
This option, recognized for the cris-axis-elf, arranges to link with input-output functions from a simulator library. Code,
initialized data and zero-initialized data are allocated consecutively.

-sim2
Like -sim, but pass linker options to locate initialized data at 0x40000000 and zero-initialized data at 0x80000000.

CR16 Options

These options are defined specifically for the CR16 ports.

-mmac
Enable the use of multiply-accumulate instructions. Disabled by default.

-mcr16cplus
-mcr16c
Generate code for CR16C or CR16C+ architecture. CR16C+ architecture is default.

-msim
Links the library libsim.a which is in compatible with simulator. Applicable to ELF compiler only.

-mint32
Choose integer type as 32-bit wide.

-mbit-ops
Generates "sbit"/"cbit" instructions for bit manipulations.

-mdata-model=model
Choose a data model. The choices for model are near, far or medium. medium is default. However, far is not valid with -mcr16c, as the
CR16C architecture does not support the far data model.

Darwin Options

These options are defined for all architectures running the Darwin operating system.

FSF GCC on Darwin does not create "fat" object files; it creates an object file for the single architecture that GCC was built to target.
Apple's GCC on Darwin does create "fat" files if multiple -arch options are used; it does so by running the compiler or linker multiple
times and joining the results together with lipo.

The subtype of the file created (like ppc7400 or ppc970 or i686) is determined by the flags that specify the ISA that GCC is targeting,
like -mcpu or -march. The -force_cpusubtype_ALL option can be used to override this.

The Darwin tools vary in their behavior when presented with an ISA mismatch. The assembler, as, only permits instructions to be used that
are valid for the subtype of the file it is generating, so you cannot put 64-bit instructions in a ppc750 object file. The linker for
shared libraries, /usr/bin/libtool, fails and prints an error if asked to create a shared library with a less restrictive subtype than its
input files (for instance, trying to put a ppc970 object file in a ppc7400 library). The linker for executables, ld, quietly gives the
executable the most restrictive subtype of any of its input files.

-Fdir
Add the framework directory dir to the head of the list of directories to be searched for header files. These directories are
interleaved with those specified by -I options and are scanned in a left-to-right order.

A framework directory is a directory with frameworks in it. A framework is a directory with a Headers and/or PrivateHeaders directory
contained directly in it that ends in .framework. The name of a framework is the name of this directory excluding the .framework.
Headers associated with the framework are found in one of those two directories, with Headers being searched first. A subframework is
a framework directory that is in a framework's Frameworks directory. Includes of subframework headers can only appear in a header of a
framework that contains the subframework, or in a sibling subframework header. Two subframeworks are siblings if they occur in the
same framework. A subframework should not have the same name as a framework; a warning is issued if this is violated. Currently a
subframework cannot have subframeworks; in the future, the mechanism may be extended to support this. The standard frameworks can be
found in /System/Library/Frameworks and /Library/Frameworks. An example include looks like "#include <Framework/header.h>", where
Framework denotes the name of the framework and header.h is found in the PrivateHeaders or Headers directory.

-iframeworkdir
Like -F except the directory is a treated as a system directory. The main difference between this -iframework and -F is that with
-iframework the compiler does not warn about constructs contained within header files found via dir. This option is valid only for the
C family of languages.

-gused
Emit debugging information for symbols that are used. For stabs debugging format, this enables -feliminate-unused-debug-symbols. This
is by default ON.

-gfull
Emit debugging information for all symbols and types.

-mmacosx-version-min=version
The earliest version of MacOS X that this executable will run on is version. Typical values of version include 10.1, 10.2, and 10.3.9.

If the compiler was built to use the system's headers by default, then the default for this option is the system version on which the
compiler is running, otherwise the default is to make choices that are compatible with as many systems and code bases as possible.

-mkernel
Enable kernel development mode. The -mkernel option sets -static, -fno-common, -fno-use-cxa-atexit, -fno-exceptions,
-fno-non-call-exceptions, -fapple-kext, -fno-weak and -fno-rtti where applicable. This mode also sets -mno-altivec, -msoft-float,
-fno-builtin and -mlong-branch for PowerPC targets.

-mone-byte-bool
Override the defaults for "bool" so that "sizeof(bool)==1". By default "sizeof(bool)" is 4 when compiling for Darwin/PowerPC and 1
when compiling for Darwin/x86, so this option has no effect on x86.

Warning: The -mone-byte-bool switch causes GCC to generate code that is not binary compatible with code generated without that switch.
Using this switch may require recompiling all other modules in a program, including system libraries. Use this switch to conform to a
non-default data model.

-mfix-and-continue
-ffix-and-continue
-findirect-data
Generate code suitable for fast turnaround development, such as to allow GDB to dynamically load .o files into already-running
programs. -findirect-data and -ffix-and-continue are provided for backwards compatibility.

-all_load
Loads all members of static archive libraries. See man ld(1) for more information.

-arch_errors_fatal
Cause the errors having to do with files that have the wrong architecture to be fatal.

-bind_at_load
Causes the output file to be marked such that the dynamic linker will bind all undefined references when the file is loaded or
launched.

-bundle
Produce a Mach-o bundle format file. See man ld(1) for more information.

-bundle_loader executable
This option specifies the executable that will load the build output file being linked. See man ld(1) for more information.

-dynamiclib
When passed this option, GCC produces a dynamic library instead of an executable when linking, using the Darwin libtool command.

-force_cpusubtype_ALL
This causes GCC's output file to have the ALL subtype, instead of one controlled by the -mcpu or -march option.

-allowable_client client_name
-client_name
-compatibility_version
-current_version
-dead_strip
-dependency-file
-dylib_file
-dylinker_install_name
-dynamic
-exported_symbols_list
-filelist
-flat_namespace
-force_flat_namespace
-headerpad_max_install_names
-image_base
-init
-install_name
-keep_private_externs
-multi_module
-multiply_defined
-multiply_defined_unused
-noall_load
-no_dead_strip_inits_and_terms
-nofixprebinding
-nomultidefs
-noprebind
-noseglinkedit
-pagezero_size
-prebind
-prebind_all_twolevel_modules
-private_bundle
-read_only_relocs
-sectalign
-sectobjectsymbols
-whyload
-seg1addr
-sectcreate
-sectobjectsymbols
-sectorder
-segaddr
-segs_read_only_addr
-segs_read_write_addr
-seg_addr_table
-seg_addr_table_filename
-seglinkedit
-segprot
-segs_read_only_addr
-segs_read_write_addr
-single_module
-static
-sub_library
-sub_umbrella
-twolevel_namespace
-umbrella
-undefined
-unexported_symbols_list
-weak_reference_mismatches
-whatsloaded
These options are passed to the Darwin linker. The Darwin linker man page describes them in detail.

DEC Alpha Options

These -m options are defined for the DEC Alpha implementations:

-mno-soft-float
-msoft-float
Use (do not use) the hardware floating-point instructions for floating-point operations. When -msoft-float is specified, functions in
libgcc.a are used to perform floating-point operations. Unless they are replaced by routines that emulate the floating-point
operations, or compiled in such a way as to call such emulations routines, these routines issue floating-point operations. If you are
compiling for an Alpha without floating-point operations, you must ensure that the library is built so as not to call them.

Note that Alpha implementations without floating-point operations are required to have floating-point registers.

-mfp-reg
-mno-fp-regs
Generate code that uses (does not use) the floating-point register set. -mno-fp-regs implies -msoft-float. If the floating-point
register set is not used, floating-point operands are passed in integer registers as if they were integers and floating-point results
are passed in $0 instead of $f0. This is a non-standard calling sequence, so any function with a floating-point argument or return
value called by code compiled with -mno-fp-regs must also be compiled with that option.

A typical use of this option is building a kernel that does not use, and hence need not save and restore, any floating-point registers.

-mieee
The Alpha architecture implements floating-point hardware optimized for maximum performance. It is mostly compliant with the IEEE
floating-point standard. However, for full compliance, software assistance is required. This option generates code fully IEEE-
compliant code except that the inexact-flag is not maintained (see below). If this option is turned on, the preprocessor macro
"_IEEE_FP" is defined during compilation. The resulting code is less efficient but is able to correctly support denormalized numbers
and exceptional IEEE values such as not-a-number and plus/minus infinity. Other Alpha compilers call this option
-ieee_with_no_inexact.

-mieee-with-inexact
This is like -mieee except the generated code also maintains the IEEE inexact-flag. Turning on this option causes the generated code
to implement fully-compliant IEEE math. In addition to "_IEEE_FP", "_IEEE_FP_EXACT" is defined as a preprocessor macro. On some Alpha
implementations the resulting code may execute significantly slower than the code generated by default. Since there is very little
code that depends on the inexact-flag, you should normally not specify this option. Other Alpha compilers call this option
-ieee_with_inexact.

-mfp-trap-mode=trap-mode
This option controls what floating-point related traps are enabled. Other Alpha compilers call this option -fptm trap-mode. The trap
mode can be set to one of four values:

n This is the default (normal) setting. The only traps that are enabled are the ones that cannot be disabled in software (e.g.,
division by zero trap).

u In addition to the traps enabled by n, underflow traps are enabled as well.

su Like u, but the instructions are marked to be safe for software completion (see Alpha architecture manual for details).

sui Like su, but inexact traps are enabled as well.

-mfp-rounding-mode=rounding-mode
Selects the IEEE rounding mode. Other Alpha compilers call this option -fprm rounding-mode. The rounding-mode can be one of:

n Normal IEEE rounding mode. Floating-point numbers are rounded towards the nearest machine number or towards the even machine
number in case of a tie.

m Round towards minus infinity.

c Chopped rounding mode. Floating-point numbers are rounded towards zero.

d Dynamic rounding mode. A field in the floating-point control register (fpcr, see Alpha architecture reference manual) controls the
rounding mode in effect. The C library initializes this register for rounding towards plus infinity. Thus, unless your program
modifies the fpcr, d corresponds to round towards plus infinity.

-mtrap-precision=trap-precision
In the Alpha architecture, floating-point traps are imprecise. This means without software assistance it is impossible to recover from
a floating trap and program execution normally needs to be terminated. GCC can generate code that can assist operating system trap
handlers in determining the exact location that caused a floating-point trap. Depending on the requirements of an application,
different levels of precisions can be selected:

p Program precision. This option is the default and means a trap handler can only identify which program caused a floating-point
exception.

f Function precision. The trap handler can determine the function that caused a floating-point exception.

i Instruction precision. The trap handler can determine the exact instruction that caused a floating-point exception.

Other Alpha compilers provide the equivalent options called -scope_safe and -resumption_safe.

-mieee-conformant
This option marks the generated code as IEEE conformant. You must not use this option unless you also specify -mtrap-precision=i and
either -mfp-trap-mode=su or -mfp-trap-mode=sui. Its only effect is to emit the line .eflag 48 in the function prologue of the
generated assembly file.

-mbuild-constants
Normally GCC examines a 32- or 64-bit integer constant to see if it can construct it from smaller constants in two or three
instructions. If it cannot, it outputs the constant as a literal and generates code to load it from the data segment at run time.

Use this option to require GCC to construct all integer constants using code, even if it takes more instructions (the maximum is six).

You typically use this option to build a shared library dynamic loader. Itself a shared library, it must relocate itself in memory
before it can find the variables and constants in its own data segment.

-mbwx
-mno-bwx
-mcix
-mno-cix
-mfix
-mno-fix
-mmax
-mno-max
Indicate whether GCC should generate code to use the optional BWX, CIX, FIX and MAX instruction sets. The default is to use the
instruction sets supported by the CPU type specified via -mcpu= option or that of the CPU on which GCC was built if none is specified.

-mfloat-vax
-mfloat-ieee
Generate code that uses (does not use) VAX F and G floating-point arithmetic instead of IEEE single and double precision.

-mexplicit-relocs
-mno-explicit-relocs
Older Alpha assemblers provided no way to generate symbol relocations except via assembler macros. Use of these macros does not allow
optimal instruction scheduling. GNU binutils as of version 2.12 supports a new syntax that allows the compiler to explicitly mark
which relocations should apply to which instructions. This option is mostly useful for debugging, as GCC detects the capabilities of
the assembler when it is built and sets the default accordingly.

-msmall-data
-mlarge-data
When -mexplicit-relocs is in effect, static data is accessed via gp-relative relocations. When -msmall-data is used, objects 8 bytes
long or smaller are placed in a small data area (the ".sdata" and ".sbss" sections) and are accessed via 16-bit relocations off of the
$gp register. This limits the size of the small data area to 64KB, but allows the variables to be directly accessed via a single
instruction.

The default is -mlarge-data. With this option the data area is limited to just below 2GB. Programs that require more than 2GB of data
must use "malloc" or "mmap" to allocate the data in the heap instead of in the program's data segment.

When generating code for shared libraries, -fpic implies -msmall-data and -fPIC implies -mlarge-data.

-msmall-text
-mlarge-text
When -msmall-text is used, the compiler assumes that the code of the entire program (or shared library) fits in 4MB, and is thus
reachable with a branch instruction. When -msmall-data is used, the compiler can assume that all local symbols share the same $gp
value, and thus reduce the number of instructions required for a function call from 4 to 1.

The default is -mlarge-text.

-mcpu=cpu_type
Set the instruction set and instruction scheduling parameters for machine type cpu_type. You can specify either the EV style name or
the corresponding chip number. GCC supports scheduling parameters for the EV4, EV5 and EV6 family of processors and chooses the
default values for the instruction set from the processor you specify. If you do not specify a processor type, GCC defaults to the
processor on which the compiler was built.

Supported values for cpu_type are

ev4
ev45
21064
Schedules as an EV4 and has no instruction set extensions.

ev5
21164
Schedules as an EV5 and has no instruction set extensions.

ev56
21164a
Schedules as an EV5 and supports the BWX extension.

pca56
21164pc
21164PC
Schedules as an EV5 and supports the BWX and MAX extensions.

ev6
21264
Schedules as an EV6 and supports the BWX, FIX, and MAX extensions.

ev67
21264a
Schedules as an EV6 and supports the BWX, CIX, FIX, and MAX extensions.

Native toolchains also support the value native, which selects the best architecture option for the host processor. -mcpu=native has
no effect if GCC does not recognize the processor.

-mtune=cpu_type
Set only the instruction scheduling parameters for machine type cpu_type. The instruction set is not changed.

Native toolchains also support the value native, which selects the best architecture option for the host processor. -mtune=native has
no effect if GCC does not recognize the processor.

-mmemory-latency=time
Sets the latency the scheduler should assume for typical memory references as seen by the application. This number is highly dependent
on the memory access patterns used by the application and the size of the external cache on the machine.

Valid options for time are

number
A decimal number representing clock cycles.

L1
L2
L3
main
The compiler contains estimates of the number of clock cycles for "typical" EV4 & EV5 hardware for the Level 1, 2 & 3 caches (also
called Dcache, Scache, and Bcache), as well as to main memory. Note that L3 is only valid for EV5.

FR30 Options

These options are defined specifically for the FR30 port.

-msmall-model
Use the small address space model. This can produce smaller code, but it does assume that all symbolic values and addresses fit into a
20-bit range.

-mno-lsim
Assume that runtime support has been provided and so there is no need to include the simulator library (libsim.a) on the linker command
line.

FT32 Options

These options are defined specifically for the FT32 port.

-msim
Specifies that the program will be run on the simulator. This causes an alternate runtime startup and library to be linked. You must
not use this option when generating programs that will run on real hardware; you must provide your own runtime library for whatever I/O
functions are needed.

-mlra
Enable Local Register Allocation. This is still experimental for FT32, so by default the compiler uses standard reload.

-mnodiv
Do not use div and mod instructions.

FRV Options

-mgpr-32
Only use the first 32 general-purpose registers.

-mgpr-64
Use all 64 general-purpose registers.

-mfpr-32
Use only the first 32 floating-point registers.

-mfpr-64
Use all 64 floating-point registers.

-mhard-float
Use hardware instructions for floating-point operations.

-msoft-float
Use library routines for floating-point operations.

-malloc-cc
Dynamically allocate condition code registers.

-mfixed-cc
Do not try to dynamically allocate condition code registers, only use "icc0" and "fcc0".

-mdword
Change ABI to use double word insns.

-mno-dword
Do not use double word instructions.

-mdouble
Use floating-point double instructions.

-mno-double
Do not use floating-point double instructions.

-mmedia
Use media instructions.

-mno-media
Do not use media instructions.

-mmuladd
Use multiply and add/subtract instructions.

-mno-muladd
Do not use multiply and add/subtract instructions.

-mfdpic
Select the FDPIC ABI, which uses function descriptors to represent pointers to functions. Without any PIC/PIE-related options, it
implies -fPIE. With -fpic or -fpie, it assumes GOT entries and small data are within a 12-bit range from the GOT base address; with
-fPIC or -fPIE, GOT offsets are computed with 32 bits. With a bfin-elf target, this option implies -msim.

-minline-plt
Enable inlining of PLT entries in function calls to functions that are not known to bind locally. It has no effect without -mfdpic.
It's enabled by default if optimizing for speed and compiling for shared libraries (i.e., -fPIC or -fpic), or when an optimization
option such as -O3 or above is present in the command line.

-mTLS
Assume a large TLS segment when generating thread-local code.

-mtls
Do not assume a large TLS segment when generating thread-local code.

-mgprel-ro
Enable the use of "GPREL" relocations in the FDPIC ABI for data that is known to be in read-only sections. It's enabled by default,
except for -fpic or -fpie: even though it may help make the global offset table smaller, it trades 1 instruction for 4. With -fPIC or
-fPIE, it trades 3 instructions for 4, one of which may be shared by multiple symbols, and it avoids the need for a GOT entry for the
referenced symbol, so it's more likely to be a win. If it is not, -mno-gprel-ro can be used to disable it.

-multilib-library-pic
Link with the (library, not FD) pic libraries. It's implied by -mlibrary-pic, as well as by -fPIC and -fpic without -mfdpic. You
should never have to use it explicitly.

-mlinked-fp
Follow the EABI requirement of always creating a frame pointer whenever a stack frame is allocated. This option is enabled by default
and can be disabled with -mno-linked-fp.

-mlong-calls
Use indirect addressing to call functions outside the current compilation unit. This allows the functions to be placed anywhere within
the 32-bit address space.

-malign-labels
Try to align labels to an 8-byte boundary by inserting NOPs into the previous packet. This option only has an effect when VLIW packing
is enabled. It doesn't create new packets; it merely adds NOPs to existing ones.

-mlibrary-pic
Generate position-independent EABI code.

-macc-4
Use only the first four media accumulator registers.

-macc-8
Use all eight media accumulator registers.

-mpack
Pack VLIW instructions.

-mno-pack
Do not pack VLIW instructions.

-mno-eflags
Do not mark ABI switches in e_flags.

-mcond-move
Enable the use of conditional-move instructions (default).

This switch is mainly for debugging the compiler and will likely be removed in a future version.

-mno-cond-move
Disable the use of conditional-move instructions.

This switch is mainly for debugging the compiler and will likely be removed in a future version.

-mscc
Enable the use of conditional set instructions (default).

This switch is mainly for debugging the compiler and will likely be removed in a future version.

-mno-scc
Disable the use of conditional set instructions.

This switch is mainly for debugging the compiler and will likely be removed in a future version.

-mcond-exec
Enable the use of conditional execution (default).

This switch is mainly for debugging the compiler and will likely be removed in a future version.

-mno-cond-exec
Disable the use of conditional execution.

This switch is mainly for debugging the compiler and will likely be removed in a future version.

-mvliw-branch
Run a pass to pack branches into VLIW instructions (default).

This switch is mainly for debugging the compiler and will likely be removed in a future version.

-mno-vliw-branch
Do not run a pass to pack branches into VLIW instructions.

This switch is mainly for debugging the compiler and will likely be removed in a future version.

-mmulti-cond-exec
Enable optimization of "&&" and "||" in conditional execution (default).

This switch is mainly for debugging the compiler and will likely be removed in a future version.

-mno-multi-cond-exec
Disable optimization of "&&" and "||" in conditional execution.

This switch is mainly for debugging the compiler and will likely be removed in a future version.

-mnested-cond-exec
Enable nested conditional execution optimizations (default).

This switch is mainly for debugging the compiler and will likely be removed in a future version.

-mno-nested-cond-exec
Disable nested conditional execution optimizations.

This switch is mainly for debugging the compiler and will likely be removed in a future version.

-moptimize-membar
This switch removes redundant "membar" instructions from the compiler-generated code. It is enabled by default.

-mno-optimize-membar
This switch disables the automatic removal of redundant "membar" instructions from the generated code.

-mtomcat-stats
Cause gas to print out tomcat statistics.

-mcpu=cpu
Select the processor type for which to generate code. Possible values are frv, fr550, tomcat, fr500, fr450, fr405, fr400, fr300 and
simple.

GNU/Linux Options

These -m options are defined for GNU/Linux targets:

-mglibc
Use the GNU C library. This is the default except on *-*-linux-*uclibc*, *-*-linux-*musl* and *-*-linux-*android* targets.

-muclibc
Use uClibc C library. This is the default on *-*-linux-*uclibc* targets.

-mmusl
Use the musl C library. This is the default on *-*-linux-*musl* targets.

-mbionic
Use Bionic C library. This is the default on *-*-linux-*android* targets.

-mandroid
Compile code compatible with Android platform. This is the default on *-*-linux-*android* targets.

When compiling, this option enables -mbionic, -fPIC, -fno-exceptions and -fno-rtti by default. When linking, this option makes the GCC
driver pass Android-specific options to the linker. Finally, this option causes the preprocessor macro "__ANDROID__" to be defined.

-tno-android-cc
Disable compilation effects of -mandroid, i.e., do not enable -mbionic, -fPIC, -fno-exceptions and -fno-rtti by default.

-tno-android-ld
Disable linking effects of -mandroid, i.e., pass standard Linux linking options to the linker.

H8/300 Options

These -m options are defined for the H8/300 implementations:

-mrelax
Shorten some address references at link time, when possible; uses the linker option -relax.

-mh Generate code for the H8/300H.

-ms Generate code for the H8S.

-mn Generate code for the H8S and H8/300H in the normal mode. This switch must be used either with -mh or -ms.

-ms2600
Generate code for the H8S/2600. This switch must be used with -ms.

-mexr
Extended registers are stored on stack before execution of function with monitor attribute. Default option is -mexr. This option is
valid only for H8S targets.

-mno-exr
Extended registers are not stored on stack before execution of function with monitor attribute. Default option is -mno-exr. This
option is valid only for H8S targets.

-mint32
Make "int" data 32 bits by default.

-malign-300
On the H8/300H and H8S, use the same alignment rules as for the H8/300. The default for the H8/300H and H8S is to align longs and
floats on 4-byte boundaries. -malign-300 causes them to be aligned on 2-byte boundaries. This option has no effect on the H8/300.

HPPA Options

These -m options are defined for the HPPA family of computers:

-march=architecture-type
Generate code for the specified architecture. The choices for architecture-type are 1.0 for PA 1.0, 1.1 for PA 1.1, and 2.0 for PA 2.0
processors. Refer to /usr/lib/sched.models on an HP-UX system to determine the proper architecture option for your machine. Code
compiled for lower numbered architectures runs on higher numbered architectures, but not the other way around.

-mpa-risc-1-0
-mpa-risc-1-1
-mpa-risc-2-0
Synonyms for -march=1.0, -march=1.1, and -march=2.0 respectively.

-mcaller-copies
The caller copies function arguments passed by hidden reference. This option should be used with care as it is not compatible with the
default 32-bit runtime. However, only aggregates larger than eight bytes are passed by hidden reference and the option provides better
compatibility with OpenMP.

-mjump-in-delay
This option is ignored and provided for compatibility purposes only.

-mdisable-fpregs
Prevent floating-point registers from being used in any manner. This is necessary for compiling kernels that perform lazy context
switching of floating-point registers. If you use this option and attempt to perform floating-point operations, the compiler aborts.

-mdisable-indexing
Prevent the compiler from using indexing address modes. This avoids some rather obscure problems when compiling MIG generated code
under MACH.

-mno-space-regs
Generate code that assumes the target has no space registers. This allows GCC to generate faster indirect calls and use unscaled index
address modes.

Such code is suitable for level 0 PA systems and kernels.

-mfast-indirect-calls
Generate code that assumes calls never cross space boundaries. This allows GCC to emit code that performs faster indirect calls.

This option does not work in the presence of shared libraries or nested functions.

-mfixed-range=register-range
Generate code treating the given register range as fixed registers. A fixed register is one that the register allocator cannot use.
This is useful when compiling kernel code. A register range is specified as two registers separated by a dash. Multiple register
ranges can be specified separated by a comma.

-mlong-load-store
Generate 3-instruction load and store sequences as sometimes required by the HP-UX 10 linker. This is equivalent to the +k option to
the HP compilers.

-mportable-runtime
Use the portable calling conventions proposed by HP for ELF systems.

-mgas
Enable the use of assembler directives only GAS understands.

-mschedule=cpu-type
Schedule code according to the constraints for the machine type cpu-type. The choices for cpu-type are 700 7100, 7100LC, 7200, 7300
and 8000. Refer to /usr/lib/sched.models on an HP-UX system to determine the proper scheduling option for your machine. The default
scheduling is 8000.

-mlinker-opt
Enable the optimization pass in the HP-UX linker. Note this makes symbolic debugging impossible. It also triggers a bug in the HP-UX
8 and HP-UX 9 linkers in which they give bogus error messages when linking some programs.

-msoft-float
Generate output containing library calls for floating point. Warning: the requisite libraries are not available for all HPPA targets.
Normally the facilities of the machine's usual C compiler are used, but this cannot be done directly in cross-compilation. You must
make your own arrangements to provide suitable library functions for cross-compilation.

-msoft-float changes the calling convention in the output file; therefore, it is only useful if you compile all of a program with this
option. In particular, you need to compile libgcc.a, the library that comes with GCC, with -msoft-float in order for this to work.

-msio
Generate the predefine, "_SIO", for server IO. The default is -mwsio. This generates the predefines, "__hp9000s700", "__hp9000s700__"
and "_WSIO", for workstation IO. These options are available under HP-UX and HI-UX.

-mgnu-ld
Use options specific to GNU ld. This passes -shared to ld when building a shared library. It is the default when GCC is configured,
explicitly or implicitly, with the GNU linker. This option does not affect which ld is called; it only changes what parameters are
passed to that ld. The ld that is called is determined by the --with-ld configure option, GCC's program search path, and finally by
the user's PATH. The linker used by GCC can be printed using which `gcc -print-prog-name=ld`. This option is only available on the
64-bit HP-UX GCC, i.e. configured with hppa*64*-*-hpux*.

-mhp-ld
Use options specific to HP ld. This passes -b to ld when building a shared library and passes +Accept TypeMismatch to ld on all links.
It is the default when GCC is configured, explicitly or implicitly, with the HP linker. This option does not affect which ld is
called; it only changes what parameters are passed to that ld. The ld that is called is determined by the --with-ld configure option,
GCC's program search path, and finally by the user's PATH. The linker used by GCC can be printed using which `gcc
-print-prog-name=ld`. This option is only available on the 64-bit HP-UX GCC, i.e. configured with hppa*64*-*-hpux*.

-mlong-calls
Generate code that uses long call sequences. This ensures that a call is always able to reach linker generated stubs. The default is
to generate long calls only when the distance from the call site to the beginning of the function or translation unit, as the case may
be, exceeds a predefined limit set by the branch type being used. The limits for normal calls are 7,600,000 and 240,000 bytes,
respectively for the PA 2.0 and PA 1.X architectures. Sibcalls are always limited at 240,000 bytes.

Distances are measured from the beginning of functions when using the -ffunction-sections option, or when using the -mgas and
-mno-portable-runtime options together under HP-UX with the SOM linker.

It is normally not desirable to use this option as it degrades performance. However, it may be useful in large applications,
particularly when partial linking is used to build the application.

The types of long calls used depends on the capabilities of the assembler and linker, and the type of code being generated. The impact
on systems that support long absolute calls, and long pic symbol-difference or pc-relative calls should be relatively small. However,
an indirect call is used on 32-bit ELF systems in pic code and it is quite long.

-munix=unix-std
Generate compiler predefines and select a startfile for the specified UNIX standard. The choices for unix-std are 93, 95 and 98. 93
is supported on all HP-UX versions. 95 is available on HP-UX 10.10 and later. 98 is available on HP-UX 11.11 and later. The default
values are 93 for HP-UX 10.00, 95 for HP-UX 10.10 though to 11.00, and 98 for HP-UX 11.11 and later.

-munix=93 provides the same predefines as GCC 3.3 and 3.4. -munix=95 provides additional predefines for "XOPEN_UNIX" and
"_XOPEN_SOURCE_EXTENDED", and the startfile unix95.o. -munix=98 provides additional predefines for "_XOPEN_UNIX",
"_XOPEN_SOURCE_EXTENDED", "_INCLUDE__STDC_A1_SOURCE" and "_INCLUDE_XOPEN_SOURCE_500", and the startfile unix98.o.

It is important to note that this option changes the interfaces for various library routines. It also affects the operational behavior
of the C library. Thus, extreme care is needed in using this option.

Library code that is intended to operate with more than one UNIX standard must test, set and restore the variable
"__xpg4_extended_mask" as appropriate. Most GNU software doesn't provide this capability.

-nolibdld
Suppress the generation of link options to search libdld.sl when the -static option is specified on HP-UX 10 and later.

-static
The HP-UX implementation of setlocale in libc has a dependency on libdld.sl. There isn't an archive version of libdld.sl. Thus, when
the -static option is specified, special link options are needed to resolve this dependency.

On HP-UX 10 and later, the GCC driver adds the necessary options to link with libdld.sl when the -static option is specified. This
causes the resulting binary to be dynamic. On the 64-bit port, the linkers generate dynamic binaries by default in any case. The
-nolibdld option can be used to prevent the GCC driver from adding these link options.

-threads
Add support for multithreading with the dce thread library under HP-UX. This option sets flags for both the preprocessor and linker.

IA-64 Options

These are the -m options defined for the Intel IA-64 architecture.

-mbig-endian
Generate code for a big-endian target. This is the default for HP-UX.

-mlittle-endian
Generate code for a little-endian target. This is the default for AIX5 and GNU/Linux.

-mgnu-as
-mno-gnu-as
Generate (or don't) code for the GNU assembler. This is the default.

-mgnu-ld
-mno-gnu-ld
Generate (or don't) code for the GNU linker. This is the default.

-mno-pic
Generate code that does not use a global pointer register. The result is not position independent code, and violates the IA-64 ABI.

-mvolatile-asm-stop
-mno-volatile-asm-stop
Generate (or don't) a stop bit immediately before and after volatile asm statements.

-mregister-names
-mno-register-names
Generate (or don't) in, loc, and out register names for the stacked registers. This may make assembler output more readable.

-mno-sdata
-msdata
Disable (or enable) optimizations that use the small data section. This may be useful for working around optimizer bugs.

-mconstant-gp
Generate code that uses a single constant global pointer value. This is useful when compiling kernel code.

-mauto-pic
Generate code that is self-relocatable. This implies -mconstant-gp. This is useful when compiling firmware code.

-minline-float-divide-min-latency
Generate code for inline divides of floating-point values using the minimum latency algorithm.

-minline-float-divide-max-throughput
Generate code for inline divides of floating-point values using the maximum throughput algorithm.

-mno-inline-float-divide
Do not generate inline code for divides of floating-point values.

-minline-int-divide-min-latency
Generate code for inline divides of integer values using the minimum latency algorithm.

-minline-int-divide-max-throughput
Generate code for inline divides of integer values using the maximum throughput algorithm.

-mno-inline-int-divide
Do not generate inline code for divides of integer values.

-minline-sqrt-min-latency
Generate code for inline square roots using the minimum latency algorithm.

-minline-sqrt-max-throughput
Generate code for inline square roots using the maximum throughput algorithm.

-mno-inline-sqrt
Do not generate inline code for "sqrt".

-mfused-madd
-mno-fused-madd
Do (don't) generate code that uses the fused multiply/add or multiply/subtract instructions. The default is to use these instructions.

-mno-dwarf2-asm
-mdwarf2-asm
Don't (or do) generate assembler code for the DWARF line number debugging info. This may be useful when not using the GNU assembler.

-mearly-stop-bits
-mno-early-stop-bits
Allow stop bits to be placed earlier than immediately preceding the instruction that triggered the stop bit. This can improve
instruction scheduling, but does not always do so.

-mtls-size=tls-size
Specify bit size of immediate TLS offsets. Valid values are 14, 22, and 64.

-mtune=cpu-type
Tune the instruction scheduling for a particular CPU, Valid values are itanium, itanium1, merced, itanium2, and mckinley.

-milp32
-mlp64
Generate code for a 32-bit or 64-bit environment. The 32-bit environment sets int, long and pointer to 32 bits. The 64-bit
environment sets int to 32 bits and long and pointer to 64 bits. These are HP-UX specific flags.

-mno-sched-br-data-spec
-msched-br-data-spec
(Dis/En)able data speculative scheduling before reload. This results in generation of "ld.a" instructions and the corresponding check
instructions ("ld.c" / "chk.a"). The default setting is disabled.

-msched-ar-data-spec
-mno-sched-ar-data-spec
(En/Dis)able data speculative scheduling after reload. This results in generation of "ld.a" instructions and the corresponding check
instructions ("ld.c" / "chk.a"). The default setting is enabled.

-mno-sched-control-spec
-msched-control-spec
(Dis/En)able control speculative scheduling. This feature is available only during region scheduling (i.e. before reload). This
results in generation of the "ld.s" instructions and the corresponding check instructions "chk.s". The default setting is disabled.

-msched-br-in-data-spec
-mno-sched-br-in-data-spec
(En/Dis)able speculative scheduling of the instructions that are dependent on the data speculative loads before reload. This is
effective only with -msched-br-data-spec enabled. The default setting is enabled.

-msched-ar-in-data-spec
-mno-sched-ar-in-data-spec
(En/Dis)able speculative scheduling of the instructions that are dependent on the data speculative loads after reload. This is
effective only with -msched-ar-data-spec enabled. The default setting is enabled.

-msched-in-control-spec
-mno-sched-in-control-spec
(En/Dis)able speculative scheduling of the instructions that are dependent on the control speculative loads. This is effective only
with -msched-control-spec enabled. The default setting is enabled.

-mno-sched-prefer-non-data-spec-insns
-msched-prefer-non-data-spec-insns
If enabled, data-speculative instructions are chosen for schedule only if there are no other choices at the moment. This makes the use
of the data speculation much more conservative. The default setting is disabled.

-mno-sched-prefer-non-control-spec-insns
-msched-prefer-non-control-spec-insns
If enabled, control-speculative instructions are chosen for schedule only if there are no other choices at the moment. This makes the
use of the control speculation much more conservative. The default setting is disabled.

-mno-sched-count-spec-in-critical-path
-msched-count-spec-in-critical-path
If enabled, speculative dependencies are considered during computation of the instructions priorities. This makes the use of the
speculation a bit more conservative. The default setting is disabled.

-msched-spec-ldc
Use a simple data speculation check. This option is on by default.

-msched-control-spec-ldc
Use a simple check for control speculation. This option is on by default.

-msched-stop-bits-after-every-cycle
Place a stop bit after every cycle when scheduling. This option is on by default.

-msched-fp-mem-deps-zero-cost
Assume that floating-point stores and loads are not likely to cause a conflict when placed into the same instruction group. This
option is disabled by default.

-msel-sched-dont-check-control-spec
Generate checks for control speculation in selective scheduling. This flag is disabled by default.

-msched-max-memory-insns=max-insns
Limit on the number of memory insns per instruction group, giving lower priority to subsequent memory insns attempting to schedule in
the same instruction group. Frequently useful to prevent cache bank conflicts. The default value is 1.

-msched-max-memory-insns-hard-limit
Makes the limit specified by msched-max-memory-insns a hard limit, disallowing more than that number in an instruction group.
Otherwise, the limit is "soft", meaning that non-memory operations are preferred when the limit is reached, but memory operations may
still be scheduled.

LM32 Options

These -m options are defined for the LatticeMico32 architecture:

-mbarrel-shift-enabled
Enable barrel-shift instructions.

-mdivide-enabled
Enable divide and modulus instructions.

-mmultiply-enabled
Enable multiply instructions.

-msign-extend-enabled
Enable sign extend instructions.

-muser-enabled
Enable user-defined instructions.

M32C Options

-mcpu=name
Select the CPU for which code is generated. name may be one of r8c for the R8C/Tiny series, m16c for the M16C (up to /60) series,
m32cm for the M16C/80 series, or m32c for the M32C/80 series.

-msim
Specifies that the program will be run on the simulator. This causes an alternate runtime library to be linked in which supports, for
example, file I/O. You must not use this option when generating programs that will run on real hardware; you must provide your own
runtime library for whatever I/O functions are needed.

-memregs=number
Specifies the number of memory-based pseudo-registers GCC uses during code generation. These pseudo-registers are used like real
registers, so there is a tradeoff between GCC's ability to fit the code into available registers, and the performance penalty of using
memory instead of registers. Note that all modules in a program must be compiled with the same value for this option. Because of
that, you must not use this option with GCC's default runtime libraries.

M32R/D Options

These -m options are defined for Renesas M32R/D architectures:

-m32r2
Generate code for the M32R/2.

-m32rx
Generate code for the M32R/X.

-m32r
Generate code for the M32R. This is the default.

-mmodel=small
Assume all objects live in the lower 16MB of memory (so that their addresses can be loaded with the "ld24" instruction), and assume all
subroutines are reachable with the "bl" instruction. This is the default.

The addressability of a particular object can be set with the "model" attribute.

-mmodel=medium
Assume objects may be anywhere in the 32-bit address space (the compiler generates "seth/add3" instructions to load their addresses),
and assume all subroutines are reachable with the "bl" instruction.

-mmodel=large
Assume objects may be anywhere in the 32-bit address space (the compiler generates "seth/add3" instructions to load their addresses),
and assume subroutines may not be reachable with the "bl" instruction (the compiler generates the much slower "seth/add3/jl"
instruction sequence).

-msdata=none
Disable use of the small data area. Variables are put into one of ".data", ".bss", or ".rodata" (unless the "section" attribute has
been specified). This is the default.

The small data area consists of sections ".sdata" and ".sbss". Objects may be explicitly put in the small data area with the "section"
attribute using one of these sections.

-msdata=sdata
Put small global and static data in the small data area, but do not generate special code to reference them.

-msdata=use
Put small global and static data in the small data area, and generate special instructions to reference them.

-G num
Put global and static objects less than or equal to num bytes into the small data or BSS sections instead of the normal data or BSS
sections. The default value of num is 8. The -msdata option must be set to one of sdata or use for this option to have any effect.

All modules should be compiled with the same -G num value. Compiling with different values of num may or may not work; if it doesn't
the linker gives an error message---incorrect code is not generated.

-mdebug
Makes the M32R-specific code in the compiler display some statistics that might help in debugging programs.

-malign-loops
Align all loops to a 32-byte boundary.

-mno-align-loops
Do not enforce a 32-byte alignment for loops. This is the default.

-missue-rate=number
Issue number instructions per cycle. number can only be 1 or 2.

-mbranch-cost=number
number can only be 1 or 2. If it is 1 then branches are preferred over conditional code, if it is 2, then the opposite applies.

-mflush-trap=number
Specifies the trap number to use to flush the cache. The default is 12. Valid numbers are between 0 and 15 inclusive.

-mno-flush-trap
Specifies that the cache cannot be flushed by using a trap.

-mflush-func=name
Specifies the name of the operating system function to call to flush the cache. The default is _flush_cache, but a function call is
only used if a trap is not available.

-mno-flush-func
Indicates that there is no OS function for flushing the cache.

M680x0 Options

These are the -m options defined for M680x0 and ColdFire processors. The default settings depend on which architecture was selected when
the compiler was configured; the defaults for the most common choices are given below.

-march=arch
Generate code for a specific M680x0 or ColdFire instruction set architecture. Permissible values of arch for M680x0 architectures are:
68000, 68010, 68020, 68030, 68040, 68060 and cpu32. ColdFire architectures are selected according to Freescale's ISA classification
and the permissible values are: isaa, isaaplus, isab and isac.

GCC defines a macro "__mcfarch__" whenever it is generating code for a ColdFire target. The arch in this macro is one of the -march
arguments given above.

When used together, -march and -mtune select code that runs on a family of similar processors but that is optimized for a particular
microarchitecture.

-mcpu=cpu
Generate code for a specific M680x0 or ColdFire processor. The M680x0 cpus are: 68000, 68010, 68020, 68030, 68040, 68060, 68302, 68332
and cpu32. The ColdFire cpus are given by the table below, which also classifies the CPUs into families:

Family : -mcpu arguments
51 : 51 51ac 51ag 51cn 51em 51je 51jf 51jg 51jm 51mm 51qe 51qm
5206 : 5202 5204 5206
5206e : 5206e
5208 : 5207 5208
5211a : 5210a 5211a
5213 : 5211 5212 5213
5216 : 5214 5216
52235 : 52230 52231 52232 52233 52234 52235
5225 : 5224 5225
52259 : 52252 52254 52255 52256 52258 52259
5235 : 5232 5233 5234 5235 523x
5249 : 5249
5250 : 5250
5271 : 5270 5271
5272 : 5272
5275 : 5274 5275
5282 : 5280 5281 5282 528x
53017 : 53011 53012 53013 53014 53015 53016 53017
5307 : 5307
5329 : 5327 5328 5329 532x
5373 : 5372 5373 537x
5407 : 5407
5475 : 5470 5471 5472 5473 5474 5475 547x 5480 5481 5482 5483 5484 5485

-mcpu=cpu overrides -march=arch if arch is compatible with cpu. Other combinations of -mcpu and -march are rejected.

GCC defines the macro "__mcf_cpu_cpu" when ColdFire target cpu is selected. It also defines "__mcf_family_family", where the value of
family is given by the table above.

-mtune=tune
Tune the code for a particular microarchitecture within the constraints set by -march and -mcpu. The M680x0 microarchitectures are:
68000, 68010, 68020, 68030, 68040, 68060 and cpu32. The ColdFire microarchitectures are: cfv1, cfv2, cfv3, cfv4 and cfv4e.

You can also use -mtune=68020-40 for code that needs to run relatively well on 68020, 68030 and 68040 targets. -mtune=68020-60 is
similar but includes 68060 targets as well. These two options select the same tuning decisions as -m68020-40 and -m68020-60
respectively.

GCC defines the macros "__mcarch" and "__mcarch__" when tuning for 680x0 architecture arch. It also defines "mcarch" unless either
-ansi or a non-GNU -std option is used. If GCC is tuning for a range of architectures, as selected by -mtune=68020-40 or
-mtune=68020-60, it defines the macros for every architecture in the range.

GCC also defines the macro "__muarch__" when tuning for ColdFire microarchitecture uarch, where uarch is one of the arguments given
above.

-m68000
-mc68000
Generate output for a 68000. This is the default when the compiler is configured for 68000-based systems. It is equivalent to
-march=68000.

Use this option for microcontrollers with a 68000 or EC000 core, including the 68008, 68302, 68306, 68307, 68322, 68328 and 68356.

-m68010
Generate output for a 68010. This is the default when the compiler is configured for 68010-based systems. It is equivalent to
-march=68010.

-m68020
-mc68020
Generate output for a 68020. This is the default when the compiler is configured for 68020-based systems. It is equivalent to
-march=68020.

-m68030
Generate output for a 68030. This is the default when the compiler is configured for 68030-based systems. It is equivalent to
-march=68030.

-m68040
Generate output for a 68040. This is the default when the compiler is configured for 68040-based systems. It is equivalent to
-march=68040.

This option inhibits the use of 68881/68882 instructions that have to be emulated by software on the 68040. Use this option if your
68040 does not have code to emulate those instructions.

-m68060
Generate output for a 68060. This is the default when the compiler is configured for 68060-based systems. It is equivalent to
-march=68060.

This option inhibits the use of 68020 and 68881/68882 instructions that have to be emulated by software on the 68060. Use this option
if your 68060 does not have code to emulate those instructions.

-mcpu32
Generate output for a CPU32. This is the default when the compiler is configured for CPU32-based systems. It is equivalent to
-march=cpu32.

Use this option for microcontrollers with a CPU32 or CPU32+ core, including the 68330, 68331, 68332, 68333, 68334, 68336, 68340, 68341,
68349 and 68360.

-m5200
Generate output for a 520X ColdFire CPU. This is the default when the compiler is configured for 520X-based systems. It is equivalent
to -mcpu=5206, and is now deprecated in favor of that option.

Use this option for microcontroller with a 5200 core, including the MCF5202, MCF5203, MCF5204 and MCF5206.

-m5206e
Generate output for a 5206e ColdFire CPU. The option is now deprecated in favor of the equivalent -mcpu=5206e.

-m528x
Generate output for a member of the ColdFire 528X family. The option is now deprecated in favor of the equivalent -mcpu=528x.

-m5307
Generate output for a ColdFire 5307 CPU. The option is now deprecated in favor of the equivalent -mcpu=5307.

-m5407
Generate output for a ColdFire 5407 CPU. The option is now deprecated in favor of the equivalent -mcpu=5407.

-mcfv4e
Generate output for a ColdFire V4e family CPU (e.g. 547x/548x). This includes use of hardware floating-point instructions. The option
is equivalent to -mcpu=547x, and is now deprecated in favor of that option.

-m68020-40
Generate output for a 68040, without using any of the new instructions. This results in code that can run relatively efficiently on
either a 68020/68881 or a 68030 or a 68040. The generated code does use the 68881 instructions that are emulated on the 68040.

The option is equivalent to -march=68020 -mtune=68020-40.

-m68020-60
Generate output for a 68060, without using any of the new instructions. This results in code that can run relatively efficiently on
either a 68020/68881 or a 68030 or a 68040. The generated code does use the 68881 instructions that are emulated on the 68060.

The option is equivalent to -march=68020 -mtune=68020-60.

-mhard-float
-m68881
Generate floating-point instructions. This is the default for 68020 and above, and for ColdFire devices that have an FPU. It defines
the macro "__HAVE_68881__" on M680x0 targets and "__mcffpu__" on ColdFire targets.

-msoft-float
Do not generate floating-point instructions; use library calls instead. This is the default for 68000, 68010, and 68832 targets. It
is also the default for ColdFire devices that have no FPU.

-mdiv
-mno-div
Generate (do not generate) ColdFire hardware divide and remainder instructions. If -march is used without -mcpu, the default is "on"
for ColdFire architectures and "off" for M680x0 architectures. Otherwise, the default is taken from the target CPU (either the default
CPU, or the one specified by -mcpu). For example, the default is "off" for -mcpu=5206 and "on" for -mcpu=5206e.

GCC defines the macro "__mcfhwdiv__" when this option is enabled.

-mshort
Consider type "int" to be 16 bits wide, like "short int". Additionally, parameters passed on the stack are also aligned to a 16-bit
boundary even on targets whose API mandates promotion to 32-bit.

-mno-short
Do not consider type "int" to be 16 bits wide. This is the default.

-mnobitfield
-mno-bitfield
Do not use the bit-field instructions. The -m68000, -mcpu32 and -m5200 options imply -mnobitfield.

-mbitfield
Do use the bit-field instructions. The -m68020 option implies -mbitfield. This is the default if you use a configuration designed for
a 68020.

-mrtd
Use a different function-calling convention, in which functions that take a fixed number of arguments return with the "rtd"
instruction, which pops their arguments while returning. This saves one instruction in the caller since there is no need to pop the
arguments there.

This calling convention is incompatible with the one normally used on Unix, so you cannot use it if you need to call libraries compiled
with the Unix compiler.

Also, you must provide function prototypes for all functions that take variable numbers of arguments (including "printf"); otherwise
incorrect code is generated for calls to those functions.

In addition, seriously incorrect code results if you call a function with too many arguments. (Normally, extra arguments are
harmlessly ignored.)

The "rtd" instruction is supported by the 68010, 68020, 68030, 68040, 68060 and CPU32 processors, but not by the 68000 or 5200.

-mno-rtd
Do not use the calling conventions selected by -mrtd. This is the default.

-malign-int
-mno-align-int
Control whether GCC aligns "int", "long", "long long", "float", "double", and "long double" variables on a 32-bit boundary
(-malign-int) or a 16-bit boundary (-mno-align-int). Aligning variables on 32-bit boundaries produces code that runs somewhat faster
on processors with 32-bit busses at the expense of more memory.

Warning: if you use the -malign-int switch, GCC aligns structures containing the above types differently than most published
application binary interface specifications for the m68k.

-mpcrel
Use the pc-relative addressing mode of the 68000 directly, instead of using a global offset table. At present, this option implies
-fpic, allowing at most a 16-bit offset for pc-relative addressing. -fPIC is not presently supported with -mpcrel, though this could
be supported for 68020 and higher processors.

-mno-strict-align
-mstrict-align
Do not (do) assume that unaligned memory references are handled by the system.

-msep-data
Generate code that allows the data segment to be located in a different area of memory from the text segment. This allows for execute-
in-place in an environment without virtual memory management. This option implies -fPIC.

-mno-sep-data
Generate code that assumes that the data segment follows the text segment. This is the default.

-mid-shared-library
Generate code that supports shared libraries via the library ID method. This allows for execute-in-place and shared libraries in an
environment without virtual memory management. This option implies -fPIC.

-mno-id-shared-library
Generate code that doesn't assume ID-based shared libraries are being used. This is the default.

-mshared-library-id=n
Specifies the identification number of the ID-based shared library being compiled. Specifying a value of 0 generates more compact
code; specifying other values forces the allocation of that number to the current library, but is no more space- or time-efficient than
omitting this option.

-mxgot
-mno-xgot
When generating position-independent code for ColdFire, generate code that works if the GOT has more than 8192 entries. This code is
larger and slower than code generated without this option. On M680x0 processors, this option is not needed; -fPIC suffices.

GCC normally uses a single instruction to load values from the GOT. While this is relatively efficient, it only works if the GOT is
smaller than about 64k. Anything larger causes the linker to report an error such as:

relocation truncated to fit: R_68K_GOT16O foobar

If this happens, you should recompile your code with -mxgot. It should then work with very large GOTs. However, code generated with
-mxgot is less efficient, since it takes 4 instructions to fetch the value of a global symbol.

Note that some linkers, including newer versions of the GNU linker, can create multiple GOTs and sort GOT entries. If you have such a
linker, you should only need to use -mxgot when compiling a single object file that accesses more than 8192 GOT entries. Very few do.

These options have no effect unless GCC is generating position-independent code.

-mlong-jump-table-offsets
Use 32-bit offsets in "switch" tables. The default is to use 16-bit offsets.

MCore Options

These are the -m options defined for the Motorola M*Core processors.

-mhardlit
-mno-hardlit
Inline constants into the code stream if it can be done in two instructions or less.

-mdiv
-mno-div
Use the divide instruction. (Enabled by default).

-mrelax-immediate
-mno-relax-immediate
Allow arbitrary-sized immediates in bit operations.

-mwide-bitfields
-mno-wide-bitfields
Always treat bit-fields as "int"-sized.

-m4byte-functions
-mno-4byte-functions
Force all functions to be aligned to a 4-byte boundary.

-mcallgraph-data
-mno-callgraph-data
Emit callgraph information.

-mslow-bytes
-mno-slow-bytes
Prefer word access when reading byte quantities.

-mlittle-endian
-mbig-endian
Generate code for a little-endian target.

-m210
-m340
Generate code for the 210 processor.

-mno-lsim
Assume that runtime support has been provided and so omit the simulator library (libsim.a) from the linker command line.

-mstack-increment=size
Set the maximum amount for a single stack increment operation. Large values can increase the speed of programs that contain functions
that need a large amount of stack space, but they can also trigger a segmentation fault if the stack is extended too much. The default
value is 0x1000.

MeP Options

-mabsdiff
Enables the "abs" instruction, which is the absolute difference between two registers.

-mall-opts
Enables all the optional instructions---average, multiply, divide, bit operations, leading zero, absolute difference, min/max, clip,
and saturation.

-maverage
Enables the "ave" instruction, which computes the average of two registers.

-mbased=n
Variables of size n bytes or smaller are placed in the ".based" section by default. Based variables use the $tp register as a base
register, and there is a 128-byte limit to the ".based" section.

-mbitops
Enables the bit operation instructions---bit test ("btstm"), set ("bsetm"), clear ("bclrm"), invert ("bnotm"), and test-and-set
("tas").

-mc=name
Selects which section constant data is placed in. name may be tiny, near, or far.

-mclip
Enables the "clip" instruction. Note that -mclip is not useful unless you also provide -mminmax.

-mconfig=name
Selects one of the built-in core configurations. Each MeP chip has one or more modules in it; each module has a core CPU and a variety
of coprocessors, optional instructions, and peripherals. The "MeP-Integrator" tool, not part of GCC, provides these configurations
through this option; using this option is the same as using all the corresponding command-line options. The default configuration is
default.

-mcop
Enables the coprocessor instructions. By default, this is a 32-bit coprocessor. Note that the coprocessor is normally enabled via the
-mconfig= option.

-mcop32
Enables the 32-bit coprocessor's instructions.

-mcop64
Enables the 64-bit coprocessor's instructions.

-mivc2
Enables IVC2 scheduling. IVC2 is a 64-bit VLIW coprocessor.

-mdc
Causes constant variables to be placed in the ".near" section.

-mdiv
Enables the "div" and "divu" instructions.

-meb
Generate big-endian code.

-mel
Generate little-endian code.

-mio-volatile
Tells the compiler that any variable marked with the "io" attribute is to be considered volatile.

-ml Causes variables to be assigned to the ".far" section by default.

-mleadz
Enables the "leadz" (leading zero) instruction.

-mm Causes variables to be assigned to the ".near" section by default.

-mminmax
Enables the "min" and "max" instructions.

-mmult
Enables the multiplication and multiply-accumulate instructions.

-mno-opts
Disables all the optional instructions enabled by -mall-opts.

-mrepeat
Enables the "repeat" and "erepeat" instructions, used for low-overhead looping.

-ms Causes all variables to default to the ".tiny" section. Note that there is a 65536-byte limit to this section. Accesses to these
variables use the %gp base register.

-msatur
Enables the saturation instructions. Note that the compiler does not currently generate these itself, but this option is included for
compatibility with other tools, like "as".

-msdram
Link the SDRAM-based runtime instead of the default ROM-based runtime.

-msim
Link the simulator run-time libraries.

-msimnovec
Link the simulator runtime libraries, excluding built-in support for reset and exception vectors and tables.

-mtf
Causes all functions to default to the ".far" section. Without this option, functions default to the ".near" section.

-mtiny=n
Variables that are n bytes or smaller are allocated to the ".tiny" section. These variables use the $gp base register. The default
for this option is 4, but note that there's a 65536-byte limit to the ".tiny" section.

MicroBlaze Options

-msoft-float
Use software emulation for floating point (default).

-mhard-float
Use hardware floating-point instructions.

-mmemcpy
Do not optimize block moves, use "memcpy".

-mno-clearbss
This option is deprecated. Use -fno-zero-initialized-in-bss instead.

-mcpu=cpu-type
Use features of, and schedule code for, the given CPU. Supported values are in the format vX.YY.Z, where X is a major version, YY is
the minor version, and Z is compatibility code. Example values are v3.00.a, v4.00.b, v5.00.a, v5.00.b, v5.00.b, v6.00.a.

-mxl-soft-mul
Use software multiply emulation (default).

-mxl-soft-div
Use software emulation for divides (default).

-mxl-barrel-shift
Use the hardware barrel shifter.

-mxl-pattern-compare
Use pattern compare instructions.

-msmall-divides
Use table lookup optimization for small signed integer divisions.

-mxl-stack-check
This option is deprecated. Use -fstack-check instead.

-mxl-gp-opt
Use GP-relative ".sdata"/".sbss" sections.

-mxl-multiply-high
Use multiply high instructions for high part of 32x32 multiply.

-mxl-float-convert
Use hardware floating-point conversion instructions.

-mxl-float-sqrt
Use hardware floating-point square root instruction.

-mbig-endian
Generate code for a big-endian target.

-mlittle-endian
Generate code for a little-endian target.

-mxl-reorder
Use reorder instructions (swap and byte reversed load/store).

-mxl-mode-app-model
Select application model app-model. Valid models are

executable
normal executable (default), uses startup code crt0.o.

xmdstub
for use with Xilinx Microprocessor Debugger (XMD) based software intrusive debug agent called xmdstub. This uses startup file
crt1.o and sets the start address of the program to 0x800.

bootstrap
for applications that are loaded using a bootloader. This model uses startup file crt2.o which does not contain a processor reset
vector handler. This is suitable for transferring control on a processor reset to the bootloader rather than the application.

novectors
for applications that do not require any of the MicroBlaze vectors. This option may be useful for applications running within a
monitoring application. This model uses crt3.o as a startup file.

Option -xl-mode-app-model is a deprecated alias for -mxl-mode-app-model.

MIPS Options

-EB Generate big-endian code.

-EL Generate little-endian code. This is the default for mips*el-*-* configurations.

-march=arch
Generate code that runs on arch, which can be the name of a generic MIPS ISA, or the name of a particular processor. The ISA names
are: mips1, mips2, mips3, mips4, mips32, mips32r2, mips32r3, mips32r5, mips32r6, mips64, mips64r2, mips64r3, mips64r5 and mips64r6.
The processor names are: 4kc, 4km, 4kp, 4ksc, 4kec, 4kem, 4kep, 4ksd, 5kc, 5kf, 20kc, 24kc, 24kf2_1, 24kf1_1, 24kec, 24kef2_1,
24kef1_1, 34kc, 34kf2_1, 34kf1_1, 34kn, 74kc, 74kf2_1, 74kf1_1, 74kf3_2, 1004kc, 1004kf2_1, 1004kf1_1, i6400, interaptiv, loongson2e,
loongson2f, loongson3a, m4k, m14k, m14kc, m14ke, m14kec, m5100, m5101, octeon, octeon+, octeon2, octeon3, orion, p5600, r2000, r3000,
r3900, r4000, r4400, r4600, r4650, r4700, r6000, r8000, rm7000, rm9000, r10000, r12000, r14000, r16000, sb1, sr71000, vr4100, vr4111,
vr4120, vr4130, vr4300, vr5000, vr5400, vr5500, xlr and xlp. The special value from-abi selects the most compatible architecture for
the selected ABI (that is, mips1 for 32-bit ABIs and mips3 for 64-bit ABIs).

The native Linux/GNU toolchain also supports the value native, which selects the best architecture option for the host processor.
-march=native has no effect if GCC does not recognize the processor.

In processor names, a final 000 can be abbreviated as k (for example, -march=r2k). Prefixes are optional, and vr may be written r.

Names of the form nf2_1 refer to processors with FPUs clocked at half the rate of the core, names of the form nf1_1 refer to processors
with FPUs clocked at the same rate as the core, and names of the form nf3_2 refer to processors with FPUs clocked a ratio of 3:2 with
respect to the core. For compatibility reasons, nf is accepted as a synonym for nf2_1 while nx and bfx are accepted as synonyms for
nf1_1.

GCC defines two macros based on the value of this option. The first is "_MIPS_ARCH", which gives the name of target architecture, as a
string. The second has the form "_MIPS_ARCH_foo", where foo is the capitalized value of "_MIPS_ARCH". For example, -march=r2000 sets
"_MIPS_ARCH" to "r2000" and defines the macro "_MIPS_ARCH_R2000".

Note that the "_MIPS_ARCH" macro uses the processor names given above. In other words, it has the full prefix and does not abbreviate
000 as k. In the case of from-abi, the macro names the resolved architecture (either "mips1" or "mips3"). It names the default
architecture when no -march option is given.

-mtune=arch
Optimize for arch. Among other things, this option controls the way instructions are scheduled, and the perceived cost of arithmetic
operations. The list of arch values is the same as for -march.

When this option is not used, GCC optimizes for the processor specified by -march. By using -march and -mtune together, it is possible
to generate code that runs on a family of processors, but optimize the code for one particular member of that family.

-mtune defines the macros "_MIPS_TUNE" and "_MIPS_TUNE_foo", which work in the same way as the -march ones described above.

-mips1
Equivalent to -march=mips1.

-mips2
Equivalent to -march=mips2.

-mips3
Equivalent to -march=mips3.

-mips4
Equivalent to -march=mips4.

-mips32
Equivalent to -march=mips32.

-mips32r3
Equivalent to -march=mips32r3.

-mips32r5
Equivalent to -march=mips32r5.

-mips32r6
Equivalent to -march=mips32r6.

-mips64
Equivalent to -march=mips64.

-mips64r2
Equivalent to -march=mips64r2.

-mips64r3
Equivalent to -march=mips64r3.

-mips64r5
Equivalent to -march=mips64r5.

-mips64r6
Equivalent to -march=mips64r6.

-mips16
-mno-mips16
Generate (do not generate) MIPS16 code. If GCC is targeting a MIPS32 or MIPS64 architecture, it makes use of the MIPS16e ASE.

MIPS16 code generation can also be controlled on a per-function basis by means of "mips16" and "nomips16" attributes.

-mflip-mips16
Generate MIPS16 code on alternating functions. This option is provided for regression testing of mixed MIPS16/non-MIPS16 code
generation, and is not intended for ordinary use in compiling user code.

-minterlink-compressed
-mno-interlink-compressed
Require (do not require) that code using the standard (uncompressed) MIPS ISA be link-compatible with MIPS16 and microMIPS code, and
vice versa.

For example, code using the standard ISA encoding cannot jump directly to MIPS16 or microMIPS code; it must either use a call or an
indirect jump. -minterlink-compressed therefore disables direct jumps unless GCC knows that the target of the jump is not compressed.

-minterlink-mips16
-mno-interlink-mips16
Aliases of -minterlink-compressed and -mno-interlink-compressed. These options predate the microMIPS ASE and are retained for
backwards compatibility.

-mabi=32
-mabi=o64
-mabi=n32
-mabi=64
-mabi=eabi
Generate code for the given ABI.

Note that the EABI has a 32-bit and a 64-bit variant. GCC normally generates 64-bit code when you select a 64-bit architecture, but
you can use -mgp32 to get 32-bit code instead.

For information about the O64 ABI, see <http://gcc.gnu.org/projects/mipso64-abi.html>.

GCC supports a variant of the o32 ABI in which floating-point registers are 64 rather than 32 bits wide. You can select this
combination with -mabi=32 -mfp64. This ABI relies on the "mthc1" and "mfhc1" instructions and is therefore only supported for
MIPS32R2, MIPS32R3 and MIPS32R5 processors.

The register assignments for arguments and return values remain the same, but each scalar value is passed in a single 64-bit register
rather than a pair of 32-bit registers. For example, scalar floating-point values are returned in $f0 only, not a $f0/$f1 pair. The
set of call-saved registers also remains the same in that the even-numbered double-precision registers are saved.

Two additional variants of the o32 ABI are supported to enable a transition from 32-bit to 64-bit registers. These are FPXX (-mfpxx)
and FP64A (-mfp64 -mno-odd-spreg). The FPXX extension mandates that all code must execute correctly when run using 32-bit or 64-bit
registers. The code can be interlinked with either FP32 or FP64, but not both. The FP64A extension is similar to the FP64 extension
but forbids the use of odd-numbered single-precision registers. This can be used in conjunction with the "FRE" mode of FPUs in
MIPS32R5 processors and allows both FP32 and FP64A code to interlink and run in the same process without changing FPU modes.

-mabicalls
-mno-abicalls
Generate (do not generate) code that is suitable for SVR4-style dynamic objects. -mabicalls is the default for SVR4-based systems.

-mshared
-mno-shared
Generate (do not generate) code that is fully position-independent, and that can therefore be linked into shared libraries. This
option only affects -mabicalls.

All -mabicalls code has traditionally been position-independent, regardless of options like -fPIC and -fpic. However, as an extension,
the GNU toolchain allows executables to use absolute accesses for locally-binding symbols. It can also use shorter GP initialization
sequences and generate direct calls to locally-defined functions. This mode is selected by -mno-shared.

-mno-shared depends on binutils 2.16 or higher and generates objects that can only be linked by the GNU linker. However, the option
does not affect the ABI of the final executable; it only affects the ABI of relocatable objects. Using -mno-shared generally makes
executables both smaller and quicker.

-mshared is the default.

-mplt
-mno-plt
Assume (do not assume) that the static and dynamic linkers support PLTs and copy relocations. This option only affects -mno-shared
-mabicalls. For the n64 ABI, this option has no effect without -msym32.

You can make -mplt the default by configuring GCC with --with-mips-plt. The default is -mno-plt otherwise.

-mxgot
-mno-xgot
Lift (do not lift) the usual restrictions on the size of the global offset table.

relocation truncated to fit: R_MIPS_GOT16 foobar

If this happens, you should recompile your code with -mxgot. This works with very large GOTs, although the code is also less
efficient, since it takes three instructions to fetch the value of a global symbol.

Note that some linkers can create multiple GOTs. If you have such a linker, you should only need to use -mxgot when a single object
file accesses more than 64k's worth of GOT entries. Very few do.

These options have no effect unless GCC is generating position independent code.

-mgp32
Assume that general-purpose registers are 32 bits wide.

-mgp64
Assume that general-purpose registers are 64 bits wide.

-mfp32
Assume that floating-point registers are 32 bits wide.

-mfp64
Assume that floating-point registers are 64 bits wide.

-mfpxx
Do not assume the width of floating-point registers.

-mhard-float
Use floating-point coprocessor instructions.

-msoft-float
Do not use floating-point coprocessor instructions. Implement floating-point calculations using library calls instead.

-mno-float
Equivalent to -msoft-float, but additionally asserts that the program being compiled does not perform any floating-point operations.
This option is presently supported only by some bare-metal MIPS configurations, where it may select a special set of libraries that
lack all floating-point support (including, for example, the floating-point "printf" formats). If code compiled with -mno-float
accidentally contains floating-point operations, it is likely to suffer a link-time or run-time failure.

-msingle-float
Assume that the floating-point coprocessor only supports single-precision operations.

-mdouble-float
Assume that the floating-point coprocessor supports double-precision operations. This is the default.

-modd-spreg
-mno-odd-spreg
Enable the use of odd-numbered single-precision floating-point registers for the o32 ABI. This is the default for processors that are
known to support these registers. When using the o32 FPXX ABI, -mno-odd-spreg is set by default.

-mabs=2008
-mabs=legacy
These options control the treatment of the special not-a-number (NaN) IEEE 754 floating-point data with the "abs.fmt" and "neg.fmt"
machine instructions.

By default or when -mabs=legacy is used the legacy treatment is selected. In this case these instructions are considered arithmetic
and avoided where correct operation is required and the input operand might be a NaN. A longer sequence of instructions that
manipulate the sign bit of floating-point datum manually is used instead unless the -ffinite-math-only option has also been specified.

The -mabs=2008 option selects the IEEE 754-2008 treatment. In this case these instructions are considered non-arithmetic and therefore
operating correctly in all cases, including in particular where the input operand is a NaN. These instructions are therefore always
used for the respective operations.

-mnan=2008
-mnan=legacy
These options control the encoding of the special not-a-number (NaN) IEEE 754 floating-point data.

The -mnan=legacy option selects the legacy encoding. In this case quiet NaNs (qNaNs) are denoted by the first bit of their trailing
significand field being 0, whereas signaling NaNs (sNaNs) are denoted by the first bit of their trailing significand field being 1.

The -mnan=2008 option selects the IEEE 754-2008 encoding. In this case qNaNs are denoted by the first bit of their trailing
significand field being 1, whereas sNaNs are denoted by the first bit of their trailing significand field being 0.

The default is -mnan=legacy unless GCC has been configured with --with-nan=2008.

-mllsc
-mno-llsc
Use (do not use) ll, sc, and sync instructions to implement atomic memory built-in functions. When neither option is specified, GCC
uses the instructions if the target architecture supports them.

-mllsc is useful if the runtime environment can emulate the instructions and -mno-llsc can be useful when compiling for nonstandard
ISAs. You can make either option the default by configuring GCC with --with-llsc and --without-llsc respectively. --with-llsc is the
default for some configurations; see the installation documentation for details.

-mdsp
-mno-dsp
Use (do not use) revision 1 of the MIPS DSP ASE.
This option defines the preprocessor macro "__mips_dsp". It also defines "__mips_dsp_rev" to 1.

-mdspr2
-mno-dspr2
Use (do not use) revision 2 of the MIPS DSP ASE.
This option defines the preprocessor macros "__mips_dsp" and "__mips_dspr2". It also defines "__mips_dsp_rev" to 2.

-msmartmips
-mno-smartmips
Use (do not use) the MIPS SmartMIPS ASE.

-mpaired-single
-mno-paired-single
Use (do not use) paired-single floating-point instructions.
This option requires hardware floating-point support to be enabled.

-mdmx
-mno-mdmx
Use (do not use) MIPS Digital Media Extension instructions. This option can only be used when generating 64-bit code and requires
hardware floating-point support to be enabled.

-mips3d
-mno-mips3d
Use (do not use) the MIPS-3D ASE. The option -mips3d implies -mpaired-single.

-mmicromips
-mno-micromips
Generate (do not generate) microMIPS code.

MicroMIPS code generation can also be controlled on a per-function basis by means of "micromips" and "nomicromips" attributes.

-mmt
-mno-mt
Use (do not use) MT Multithreading instructions.

-mmcu
-mno-mcu
Use (do not use) the MIPS MCU ASE instructions.

-meva
-mno-eva
Use (do not use) the MIPS Enhanced Virtual Addressing instructions.

-mvirt
-mno-virt
Use (do not use) the MIPS Virtualization (VZ) instructions.

-mxpa
-mno-xpa
Use (do not use) the MIPS eXtended Physical Address (XPA) instructions.

-mlong64
Force "long" types to be 64 bits wide. See -mlong32 for an explanation of the default and the way that the pointer size is determined.

-mlong32
Force "long", "int", and pointer types to be 32 bits wide.

The default size of "int"s, "long"s and pointers depends on the ABI. All the supported ABIs use 32-bit "int"s. The n64 ABI uses
64-bit "long"s, as does the 64-bit EABI; the others use 32-bit "long"s. Pointers are the same size as "long"s, or the same size as
integer registers, whichever is smaller.

-msym32
-mno-sym32
Assume (do not assume) that all symbols have 32-bit values, regardless of the selected ABI. This option is useful in combination with
-mabi=64 and -mno-abicalls because it allows GCC to generate shorter and faster references to symbolic addresses.

-G num
Put definitions of externally-visible data in a small data section if that data is no bigger than num bytes. GCC can then generate
more efficient accesses to the data; see -mgpopt for details.

The default -G option depends on the configuration.

-mlocal-sdata
-mno-local-sdata
Extend (do not extend) the -G behavior to local data too, such as to static variables in C. -mlocal-sdata is the default for all
configurations.

If the linker complains that an application is using too much small data, you might want to try rebuilding the less performance-
critical parts with -mno-local-sdata. You might also want to build large libraries with -mno-local-sdata, so that the libraries leave
more room for the main program.

-mextern-sdata
-mno-extern-sdata
Assume (do not assume) that externally-defined data is in a small data section if the size of that data is within the -G limit.
-mextern-sdata is the default for all configurations.

If you compile a module Mod with -mextern-sdata -G num -mgpopt, and Mod references a variable Var that is no bigger than num bytes, you
must make sure that Var is placed in a small data section. If Var is defined by another module, you must either compile that module
with a high-enough -G setting or attach a "section" attribute to Var's definition. If Var is common, you must link the application
with a high-enough -G setting.

The easiest way of satisfying these restrictions is to compile and link every module with the same -G option. However, you may wish to
build a library that supports several different small data limits. You can do this by compiling the library with the highest supported
-G setting and additionally using -mno-extern-sdata to stop the library from making assumptions about externally-defined data.

-mgpopt
-mno-gpopt
Use (do not use) GP-relative accesses for symbols that are known to be in a small data section; see -G, -mlocal-sdata and
-mextern-sdata. -mgpopt is the default for all configurations.

-mno-gpopt is useful for cases where the $gp register might not hold the value of "_gp". For example, if the code is part of a library
that might be used in a boot monitor, programs that call boot monitor routines pass an unknown value in $gp. (In such situations, the
boot monitor itself is usually compiled with -G0.)

-mno-gpopt implies -mno-local-sdata and -mno-extern-sdata.

-membedded-data
-mno-embedded-data
Allocate variables to the read-only data section first if possible, then next in the small data section if possible, otherwise in data.
This gives slightly slower code than the default, but reduces the amount of RAM required when executing, and thus may be preferred for
some embedded systems.

-muninit-const-in-rodata
-mno-uninit-const-in-rodata
Put uninitialized "const" variables in the read-only data section. This option is only meaningful in conjunction with -membedded-data.

-mcode-readable=setting
Specify whether GCC may generate code that reads from executable sections. There are three possible settings:

-mcode-readable=yes
Instructions may freely access executable sections. This is the default setting.

-mcode-readable=pcrel
MIPS16 PC-relative load instructions can access executable sections, but other instructions must not do so. This option is useful
on 4KSc and 4KSd processors when the code TLBs have the Read Inhibit bit set. It is also useful on processors that can be
configured to have a dual instruction/data SRAM interface and that, like the M4K, automatically redirect PC-relative loads to the
instruction RAM.

-mcode-readable=no
Instructions must not access executable sections. This option can be useful on targets that are configured to have a dual
instruction/data SRAM interface but that (unlike the M4K) do not automatically redirect PC-relative loads to the instruction RAM.

-msplit-addresses
-mno-split-addresses
Enable (disable) use of the "%hi()" and "%lo()" assembler relocation operators. This option has been superseded by -mexplicit-relocs
but is retained for backwards compatibility.

-mexplicit-relocs
-mno-explicit-relocs
Use (do not use) assembler relocation operators when dealing with symbolic addresses. The alternative, selected by
-mno-explicit-relocs, is to use assembler macros instead.

-mexplicit-relocs is the default if GCC was configured to use an assembler that supports relocation operators.

-mcheck-zero-division
-mno-check-zero-division
Trap (do not trap) on integer division by zero.

The default is -mcheck-zero-division.

-mdivide-traps
-mdivide-breaks
MIPS systems check for division by zero by generating either a conditional trap or a break instruction. Using traps results in smaller
code, but is only supported on MIPS II and later. Also, some versions of the Linux kernel have a bug that prevents trap from
generating the proper signal ("SIGFPE"). Use -mdivide-traps to allow conditional traps on architectures that support them and
-mdivide-breaks to force the use of breaks.

The default is usually -mdivide-traps, but this can be overridden at configure time using --with-divide=breaks. Divide-by-zero checks
can be completely disabled using -mno-check-zero-division.

-mload-store-pairs
-mno-load-store-pairs
Enable (disable) an optimization that pairs consecutive load or store instructions to enable load/store bonding. This option is
enabled by default but only takes effect when the selected architecture is known to support bonding.

-mmemcpy
-mno-memcpy
Force (do not force) the use of "memcpy" for non-trivial block moves. The default is -mno-memcpy, which allows GCC to inline most
constant-sized copies.

-mlong-calls
-mno-long-calls
Disable (do not disable) use of the "jal" instruction. Calling functions using "jal" is more efficient but requires the caller and
callee to be in the same 256 megabyte segment.

This option has no effect on abicalls code. The default is -mno-long-calls.

-mmad
-mno-mad
Enable (disable) use of the "mad", "madu" and "mul" instructions, as provided by the R4650 ISA.

-mimadd
-mno-imadd
Enable (disable) use of the "madd" and "msub" integer instructions. The default is -mimadd on architectures that support "madd" and
"msub" except for the 74k architecture where it was found to generate slower code.

-mfused-madd
-mno-fused-madd
Enable (disable) use of the floating-point multiply-accumulate instructions, when they are available. The default is -mfused-madd.

On the R8000 CPU when multiply-accumulate instructions are used, the intermediate product is calculated to infinite precision and is
not subject to the FCSR Flush to Zero bit. This may be undesirable in some circumstances. On other processors the result is
numerically identical to the equivalent computation using separate multiply, add, subtract and negate instructions.

-nocpp
Tell the MIPS assembler to not run its preprocessor over user assembler files (with a .s suffix) when assembling them.

-mfix-24k
-mno-fix-24k
Work around the 24K E48 (lost data on stores during refill) errata. The workarounds are implemented by the assembler rather than by
GCC.

-mfix-r4000
-mno-fix-r4000
Work around certain R4000 CPU errata:

- A double-word or a variable shift may give an incorrect result if executed immediately after starting an integer division.

- A double-word or a variable shift may give an incorrect result if executed while an integer multiplication is in progress.

- An integer division may give an incorrect result if started in a delay slot of a taken branch or a jump.

-mfix-r4400
-mno-fix-r4400
Work around certain R4400 CPU errata:

- A double-word or a variable shift may give an incorrect result if executed immediately after starting an integer division.

-mfix-r10000
-mno-fix-r10000
Work around certain R10000 errata:

- "ll"/"sc" sequences may not behave atomically on revisions prior to 3.0. They may deadlock on revisions 2.6 and earlier.

This option can only be used if the target architecture supports branch-likely instructions. -mfix-r10000 is the default when
-march=r10000 is used; -mno-fix-r10000 is the default otherwise.

-mfix-rm7000
-mno-fix-rm7000
Work around the RM7000 "dmult"/"dmultu" errata. The workarounds are implemented by the assembler rather than by GCC.

-mfix-vr4120
-mno-fix-vr4120
Work around certain VR4120 errata:

- "dmultu" does not always produce the correct result.

- "div" and "ddiv" do not always produce the correct result if one of the operands is negative.

The workarounds for the division errata rely on special functions in libgcc.a. At present, these functions are only provided by the
"mips64vr*-elf" configurations.

Other VR4120 errata require a NOP to be inserted between certain pairs of instructions. These errata are handled by the assembler, not
by GCC itself.

-mfix-vr4130
Work around the VR4130 "mflo"/"mfhi" errata. The workarounds are implemented by the assembler rather than by GCC, although GCC avoids
using "mflo" and "mfhi" if the VR4130 "macc", "macchi", "dmacc" and "dmacchi" instructions are available instead.

-mfix-sb1
-mno-fix-sb1
Work around certain SB-1 CPU core errata. (This flag currently works around the SB-1 revision 2 "F1" and "F2" floating-point errata.)

-mr10k-cache-barrier=setting
Specify whether GCC should insert cache barriers to avoid the side-effects of speculation on R10K processors.

In common with many processors, the R10K tries to predict the outcome of a conditional branch and speculatively executes instructions
from the "taken" branch. It later aborts these instructions if the predicted outcome is wrong. However, on the R10K, even aborted
instructions can have side effects.

This problem only affects kernel stores and, depending on the system, kernel loads. As an example, a speculatively-executed store may
load the target memory into cache and mark the cache line as dirty, even if the store itself is later aborted. If a DMA operation
writes to the same area of memory before the "dirty" line is flushed, the cached data overwrites the DMA-ed data. See the R10K
processor manual for a full description, including other potential problems.

One workaround is to insert cache barrier instructions before every memory access that might be speculatively executed and that might
have side effects even if aborted. -mr10k-cache-barrier=setting controls GCC's implementation of this workaround. It assumes that
aborted accesses to any byte in the following regions does not have side effects:

1. the memory occupied by the current function's stack frame;

2. the memory occupied by an incoming stack argument;

3. the memory occupied by an object with a link-time-constant address.

It is the kernel's responsibility to ensure that speculative accesses to these regions are indeed safe.

If the input program contains a function declaration such as:

void foo (void);

then the implementation of "foo" must allow "j foo" and "jal foo" to be executed speculatively. GCC honors this restriction for
functions it compiles itself. It expects non-GCC functions (such as hand-written assembly code) to do the same.

The option has three forms:

-mr10k-cache-barrier=load-store
Insert a cache barrier before a load or store that might be speculatively executed and that might have side effects even if
aborted.

-mr10k-cache-barrier=store
Insert a cache barrier before a store that might be speculatively executed and that might have side effects even if aborted.

-mr10k-cache-barrier=none
Disable the insertion of cache barriers. This is the default setting.

-mflush-func=func
-mno-flush-func
Specifies the function to call to flush the I and D caches, or to not call any such function. If called, the function must take the
same arguments as the common "_flush_func", that is, the address of the memory range for which the cache is being flushed, the size of
the memory range, and the number 3 (to flush both caches). The default depends on the target GCC was configured for, but commonly is
either "_flush_func" or "__cpu_flush".

mbranch-cost=num
Set the cost of branches to roughly num "simple" instructions. This cost is only a heuristic and is not guaranteed to produce
consistent results across releases. A zero cost redundantly selects the default, which is based on the -mtune setting.

-mbranch-likely
-mno-branch-likely
Enable or disable use of Branch Likely instructions, regardless of the default for the selected architecture. By default, Branch
Likely instructions may be generated if they are supported by the selected architecture. An exception is for the MIPS32 and MIPS64
architectures and processors that implement those architectures; for those, Branch Likely instructions are not be generated by default
because the MIPS32 and MIPS64 architectures specifically deprecate their use.

-mcompact-branches=never
-mcompact-branches=optimal
-mcompact-branches=always
These options control which form of branches will be generated. The default is -mcompact-branches=optimal.

The -mcompact-branches=never option ensures that compact branch instructions will never be generated.

The -mcompact-branches=always option ensures that a compact branch instruction will be generated if available. If a compact branch
instruction is not available, a delay slot form of the branch will be used instead.

This option is supported from MIPS Release 6 onwards.

The -mcompact-branches=optimal option will cause a delay slot branch to be used if one is available in the current ISA and the delay
slot is successfully filled. If the delay slot is not filled, a compact branch will be chosen if one is available.

-mfp-exceptions
-mno-fp-exceptions
Specifies whether FP exceptions are enabled. This affects how FP instructions are scheduled for some processors. The default is that
FP exceptions are enabled.

For instance, on the SB-1, if FP exceptions are disabled, and we are emitting 64-bit code, then we can use both FP pipes. Otherwise,
we can only use one FP pipe.

-mvr4130-align
-mno-vr4130-align
The VR4130 pipeline is two-way superscalar, but can only issue two instructions together if the first one is 8-byte aligned. When this
option is enabled, GCC aligns pairs of instructions that it thinks should execute in parallel.

This option only has an effect when optimizing for the VR4130. It normally makes code faster, but at the expense of making it bigger.
It is enabled by default at optimization level -O3.

-msynci
-mno-synci
Enable (disable) generation of "synci" instructions on architectures that support it. The "synci" instructions (if enabled) are
generated when "__builtin___clear_cache" is compiled.

This option defaults to -mno-synci, but the default can be overridden by configuring GCC with --with-synci.

When compiling code for single processor systems, it is generally safe to use "synci". However, on many multi-core (SMP) systems, it
does not invalidate the instruction caches on all cores and may lead to undefined behavior.

-mrelax-pic-calls
-mno-relax-pic-calls
Try to turn PIC calls that are normally dispatched via register $25 into direct calls. This is only possible if the linker can resolve
the destination at link time and if the destination is within range for a direct call.

-mrelax-pic-calls is the default if GCC was configured to use an assembler and a linker that support the ".reloc" assembly directive
and -mexplicit-relocs is in effect. With -mno-explicit-relocs, this optimization can be performed by the assembler and the linker
alone without help from the compiler.

-mmcount-ra-address
-mno-mcount-ra-address
Emit (do not emit) code that allows "_mcount" to modify the calling function's return address. When enabled, this option extends the
usual "_mcount" interface with a new ra-address parameter, which has type "intptr_t *" and is passed in register $12. "_mcount" can
then modify the return address by doing both of the following:

* Returning the new address in register $31.

* Storing the new address in "*ra-address", if ra-address is nonnull.

The default is -mno-mcount-ra-address.

-mframe-header-opt
-mno-frame-header-opt
Enable (disable) frame header optimization in the o32 ABI. When using the o32 ABI, calling functions will allocate 16 bytes on the
stack for the called function to write out register arguments. When enabled, this optimization will suppress the allocation of the
frame header if it can be determined that it is unused.

This optimization is off by default at all optimization levels.

-mlxc1-sxc1
-mno-lxc1-sxc1
When applicable, enable (disable) the generation of "lwxc1", "swxc1", "ldxc1", "sdxc1" instructions. Enabled by default.

-mmadd4
-mno-madd4
When applicable, enable (disable) the generation of 4-operand "madd.s", "madd.d" and related instructions. Enabled by default.

MMIX Options

These options are defined for the MMIX:

-mlibfuncs
-mno-libfuncs
Specify that intrinsic library functions are being compiled, passing all values in registers, no matter the size.

-mepsilon
-mno-epsilon
Generate floating-point comparison instructions that compare with respect to the "rE" epsilon register.

-mabi=mmixware
-mabi=gnu
Generate code that passes function parameters and return values that (in the called function) are seen as registers $0 and up, as
opposed to the GNU ABI which uses global registers $231 and up.

-mzero-extend
-mno-zero-extend
When reading data from memory in sizes shorter than 64 bits, use (do not use) zero-extending load instructions by default, rather than
sign-extending ones.

-mknuthdiv
-mno-knuthdiv
Make the result of a division yielding a remainder have the same sign as the divisor. With the default, -mno-knuthdiv, the sign of the
remainder follows the sign of the dividend. Both methods are arithmetically valid, the latter being almost exclusively used.

-mtoplevel-symbols
-mno-toplevel-symbols
Prepend (do not prepend) a : to all global symbols, so the assembly code can be used with the "PREFIX" assembly directive.

-melf
Generate an executable in the ELF format, rather than the default mmo format used by the mmix simulator.

-mbranch-predict
-mno-branch-predict
Use (do not use) the probable-branch instructions, when static branch prediction indicates a probable branch.

-mbase-addresses
-mno-base-addresses
Generate (do not generate) code that uses base addresses. Using a base address automatically generates a request (handled by the
assembler and the linker) for a constant to be set up in a global register. The register is used for one or more base address requests
within the range 0 to 255 from the value held in the register. The generally leads to short and fast code, but the number of different
data items that can be addressed is limited. This means that a program that uses lots of static data may require -mno-base-addresses.

-msingle-exit
-mno-single-exit
Force (do not force) generated code to have a single exit point in each function.

MN10300 Options

These -m options are defined for Matsushita MN10300 architectures:

-mmult-bug
Generate code to avoid bugs in the multiply instructions for the MN10300 processors. This is the default.

-mno-mult-bug
Do not generate code to avoid bugs in the multiply instructions for the MN10300 processors.

-mam33
Generate code using features specific to the AM33 processor.

-mno-am33
Do not generate code using features specific to the AM33 processor. This is the default.

-mam33-2
Generate code using features specific to the AM33/2.0 processor.

-mam34
Generate code using features specific to the AM34 processor.

-mtune=cpu-type
Use the timing characteristics of the indicated CPU type when scheduling instructions. This does not change the targeted processor
type. The CPU type must be one of mn10300, am33, am33-2 or am34.

-mreturn-pointer-on-d0
When generating a function that returns a pointer, return the pointer in both "a0" and "d0". Otherwise, the pointer is returned only
in "a0", and attempts to call such functions without a prototype result in errors. Note that this option is on by default; use
-mno-return-pointer-on-d0 to disable it.

-mno-crt0
Do not link in the C run-time initialization object file.

-mrelax
Indicate to the linker that it should perform a relaxation optimization pass to shorten branches, calls and absolute memory addresses.
This option only has an effect when used on the command line for the final link step.

This option makes symbolic debugging impossible.

-mliw
Allow the compiler to generate Long Instruction Word instructions if the target is the AM33 or later. This is the default. This
option defines the preprocessor macro "__LIW__".

-mnoliw
Do not allow the compiler to generate Long Instruction Word instructions. This option defines the preprocessor macro "__NO_LIW__".

-msetlb
Allow the compiler to generate the SETLB and Lcc instructions if the target is the AM33 or later. This is the default. This option
defines the preprocessor macro "__SETLB__".

-mnosetlb
Do not allow the compiler to generate SETLB or Lcc instructions. This option defines the preprocessor macro "__NO_SETLB__".

Moxie Options

-meb
Generate big-endian code. This is the default for moxie-*-* configurations.

-mel
Generate little-endian code.

-mmul.x
Generate mul.x and umul.x instructions. This is the default for moxiebox-*-* configurations.

-mno-crt0
Do not link in the C run-time initialization object file.

MSP430 Options

These options are defined for the MSP430:

-masm-hex
Force assembly output to always use hex constants. Normally such constants are signed decimals, but this option is available for
testsuite and/or aesthetic purposes.

-mmcu=
Select the MCU to target. This is used to create a C preprocessor symbol based upon the MCU name, converted to upper case and pre- and
post-fixed with __. This in turn is used by the msp430.h header file to select an MCU-specific supplementary header file.

The option also sets the ISA to use. If the MCU name is one that is known to only support the 430 ISA then that is selected, otherwise
the 430X ISA is selected. A generic MCU name of msp430 can also be used to select the 430 ISA. Similarly the generic msp430x MCU name
selects the 430X ISA.

In addition an MCU-specific linker script is added to the linker command line. The script's name is the name of the MCU with .ld
appended. Thus specifying -mmcu=xxx on the gcc command line defines the C preprocessor symbol "__XXX__" and cause the linker to search
for a script called xxx.ld.

This option is also passed on to the assembler.

-mwarn-mcu
-mno-warn-mcu
This option enables or disables warnings about conflicts between the MCU name specified by the -mmcu option and the ISA set by the
-mcpu option and/or the hardware multiply support set by the -mhwmult option. It also toggles warnings about unrecognized MCU names.
This option is on by default.

-mcpu=
Specifies the ISA to use. Accepted values are msp430, msp430x and msp430xv2. This option is deprecated. The -mmcu= option should be
used to select the ISA.

-msim
Link to the simulator runtime libraries and linker script. Overrides any scripts that would be selected by the -mmcu= option.

-mlarge
Use large-model addressing (20-bit pointers, 32-bit "size_t").

-msmall
Use small-model addressing (16-bit pointers, 16-bit "size_t").

-mrelax
This option is passed to the assembler and linker, and allows the linker to perform certain optimizations that cannot be done until the
final link.

mhwmult=
Describes the type of hardware multiply supported by the target. Accepted values are none for no hardware multiply, 16bit for the
original 16-bit-only multiply supported by early MCUs. 32bit for the 16/32-bit multiply supported by later MCUs and f5series for the
16/32-bit multiply supported by F5-series MCUs. A value of auto can also be given. This tells GCC to deduce the hardware multiply
support based upon the MCU name provided by the -mmcu option. If no -mmcu option is specified or if the MCU name is not recognized
then no hardware multiply support is assumed. "auto" is the default setting.

Hardware multiplies are normally performed by calling a library routine. This saves space in the generated code. When compiling at
-O3 or higher however the hardware multiplier is invoked inline. This makes for bigger, but faster code.

The hardware multiply routines disable interrupts whilst running and restore the previous interrupt state when they finish. This makes
them safe to use inside interrupt handlers as well as in normal code.

-minrt
Enable the use of a minimum runtime environment - no static initializers or constructors. This is intended for memory-constrained
devices. The compiler includes special symbols in some objects that tell the linker and runtime which code fragments are required.

-mcode-region=
-mdata-region=
These options tell the compiler where to place functions and data that do not have one of the "lower", "upper", "either" or "section"
attributes. Possible values are "lower", "upper", "either" or "any". The first three behave like the corresponding attribute. The
fourth possible value - "any" - is the default. It leaves placement entirely up to the linker script and how it assigns the standard
sections (".text", ".data", etc) to the memory regions.

-msilicon-errata=
This option passes on a request to assembler to enable the fixes for the named silicon errata.

-msilicon-errata-warn=
This option passes on a request to the assembler to enable warning messages when a silicon errata might need to be applied.

NDS32 Options

These options are defined for NDS32 implementations:

-mbig-endian
Generate code in big-endian mode.

-mlittle-endian
Generate code in little-endian mode.

-mreduced-regs
Use reduced-set registers for register allocation.

-mfull-regs
Use full-set registers for register allocation.

-mcmov
Generate conditional move instructions.

-mno-cmov
Do not generate conditional move instructions.

-mperf-ext
Generate performance extension instructions.

-mno-perf-ext
Do not generate performance extension instructions.

-mv3push
Generate v3 push25/pop25 instructions.

-mno-v3push
Do not generate v3 push25/pop25 instructions.

-m16-bit
Generate 16-bit instructions.

-mno-16-bit
Do not generate 16-bit instructions.

-misr-vector-size=num
Specify the size of each interrupt vector, which must be 4 or 16.

-mcache-block-size=num
Specify the size of each cache block, which must be a power of 2 between 4 and 512.

-march=arch
Specify the name of the target architecture.

-mcmodel=code-model
Set the code model to one of

small
All the data and read-only data segments must be within 512KB addressing space. The text segment must be within 16MB addressing
space.

medium
The data segment must be within 512KB while the read-only data segment can be within 4GB addressing space. The text segment should
be still within 16MB addressing space.

large
All the text and data segments can be within 4GB addressing space.

-mctor-dtor
Enable constructor/destructor feature.

-mrelax
Guide linker to relax instructions.

Nios II Options

These are the options defined for the Altera Nios II processor.

-G num
Put global and static objects less than or equal to num bytes into the small data or BSS sections instead of the normal data or BSS
sections. The default value of num is 8.

-mgpopt=option
-mgpopt
-mno-gpopt
Generate (do not generate) GP-relative accesses. The following option names are recognized:

none
Do not generate GP-relative accesses.

local
Generate GP-relative accesses for small data objects that are not external, weak, or uninitialized common symbols. Also use GP-
relative addressing for objects that have been explicitly placed in a small data section via a "section" attribute.

global
As for local, but also generate GP-relative accesses for small data objects that are external, weak, or common. If you use this
option, you must ensure that all parts of your program (including libraries) are compiled with the same -G setting.

data
Generate GP-relative accesses for all data objects in the program. If you use this option, the entire data and BSS segments of
your program must fit in 64K of memory and you must use an appropriate linker script to allocate them within the addressable range
of the global pointer.

all Generate GP-relative addresses for function pointers as well as data pointers. If you use this option, the entire text, data, and
BSS segments of your program must fit in 64K of memory and you must use an appropriate linker script to allocate them within the
addressable range of the global pointer.

-mgpopt is equivalent to -mgpopt=local, and -mno-gpopt is equivalent to -mgpopt=none.

The default is -mgpopt except when -fpic or -fPIC is specified to generate position-independent code. Note that the Nios II ABI does
not permit GP-relative accesses from shared libraries.

You may need to specify -mno-gpopt explicitly when building programs that include large amounts of small data, including large GOT data
sections. In this case, the 16-bit offset for GP-relative addressing may not be large enough to allow access to the entire small data
section.

-mel
-meb
Generate little-endian (default) or big-endian (experimental) code, respectively.

-march=arch
This specifies the name of the target Nios II architecture. GCC uses this name to determine what kind of instructions it can emit when
generating assembly code. Permissible names are: r1, r2.

The preprocessor macro "__nios2_arch__" is available to programs, with value 1 or 2, indicating the targeted ISA level.

-mbypass-cache
-mno-bypass-cache
Force all load and store instructions to always bypass cache by using I/O variants of the instructions. The default is not to bypass
the cache.

-mno-cache-volatile
-mcache-volatile
Volatile memory access bypass the cache using the I/O variants of the load and store instructions. The default is not to bypass the
cache.

-mno-fast-sw-div
-mfast-sw-div
Do not use table-based fast divide for small numbers. The default is to use the fast divide at -O3 and above.

-mno-hw-mul
-mhw-mul
-mno-hw-mulx
-mhw-mulx
-mno-hw-div
-mhw-div
Enable or disable emitting "mul", "mulx" and "div" family of instructions by the compiler. The default is to emit "mul" and not emit
"div" and "mulx".

-mbmx
-mno-bmx
-mcdx
-mno-cdx
Enable or disable generation of Nios II R2 BMX (bit manipulation) and CDX (code density) instructions. Enabling these instructions
also requires -march=r2. Since these instructions are optional extensions to the R2 architecture, the default is not to emit them.

-mcustom-insn=N
-mno-custom-insn
Each -mcustom-insn=N option enables use of a custom instruction with encoding N when generating code that uses insn. For example,
-mcustom-fadds=253 generates custom instruction 253 for single-precision floating-point add operations instead of the default behavior
of using a library call.

The following values of insn are supported. Except as otherwise noted, floating-point operations are expected to be implemented with
normal IEEE 754 semantics and correspond directly to the C operators or the equivalent GCC built-in functions.

Single-precision floating point:

fadds, fsubs, fdivs, fmuls
Binary arithmetic operations.

fnegs
Unary negation.

fabss
Unary absolute value.

fcmpeqs, fcmpges, fcmpgts, fcmples, fcmplts, fcmpnes
Comparison operations.

fmins, fmaxs
Floating-point minimum and maximum. These instructions are only generated if -ffinite-math-only is specified.

fsqrts
Unary square root operation.

fcoss, fsins, ftans, fatans, fexps, flogs
Floating-point trigonometric and exponential functions. These instructions are only generated if -funsafe-math-optimizations is
also specified.

Double-precision floating point:

faddd, fsubd, fdivd, fmuld
Binary arithmetic operations.

fnegd
Unary negation.

fabsd
Unary absolute value.

fcmpeqd, fcmpged, fcmpgtd, fcmpled, fcmpltd, fcmpned
Comparison operations.

fmind, fmaxd
Double-precision minimum and maximum. These instructions are only generated if -ffinite-math-only is specified.

fsqrtd
Unary square root operation.

fcosd, fsind, ftand, fatand, fexpd, flogd
Double-precision trigonometric and exponential functions. These instructions are only generated if -funsafe-math-optimizations is
also specified.

Conversions:

fextsd
Conversion from single precision to double precision.

ftruncds
Conversion from double precision to single precision.

fixsi, fixsu, fixdi, fixdu
Conversion from floating point to signed or unsigned integer types, with truncation towards zero.

round
Conversion from single-precision floating point to signed integer, rounding to the nearest integer and ties away from zero. This
corresponds to the "__builtin_lroundf" function when -fno-math-errno is used.

floatis, floatus, floatid, floatud
Conversion from signed or unsigned integer types to floating-point types.

In addition, all of the following transfer instructions for internal registers X and Y must be provided to use any of the double-
precision floating-point instructions. Custom instructions taking two double-precision source operands expect the first operand in the
64-bit register X. The other operand (or only operand of a unary operation) is given to the custom arithmetic instruction with the
least significant half in source register src1 and the most significant half in src2. A custom instruction that returns a double-
precision result returns the most significant 32 bits in the destination register and the other half in 32-bit register Y. GCC
automatically generates the necessary code sequences to write register X and/or read register Y when double-precision floating-point
instructions are used.

fwrx
Write src1 into the least significant half of X and src2 into the most significant half of X.

fwry
Write src1 into Y.

frdxhi, frdxlo
Read the most or least (respectively) significant half of X and store it in dest.

frdy
Read the value of Y and store it into dest.

Note that you can gain more local control over generation of Nios II custom instructions by using the "target("custom-insn=N")" and
"target("no-custom-insn")" function attributes or pragmas.

-mcustom-fpu-cfg=name
This option enables a predefined, named set of custom instruction encodings (see -mcustom-insn above). Currently, the following sets
are defined:

-mcustom-fpu-cfg=60-1 is equivalent to: -mcustom-fmuls=252 -mcustom-fadds=253 -mcustom-fsubs=254 -fsingle-precision-constant

-mcustom-fpu-cfg=60-2 is equivalent to: -mcustom-fmuls=252 -mcustom-fadds=253 -mcustom-fsubs=254 -mcustom-fdivs=255
-fsingle-precision-constant

-mcustom-fpu-cfg=72-3 is equivalent to: -mcustom-floatus=243 -mcustom-fixsi=244 -mcustom-floatis=245 -mcustom-fcmpgts=246
-mcustom-fcmples=249 -mcustom-fcmpeqs=250 -mcustom-fcmpnes=251 -mcustom-fmuls=252 -mcustom-fadds=253 -mcustom-fsubs=254
-mcustom-fdivs=255 -fsingle-precision-constant

Custom instruction assignments given by individual -mcustom-insn= options override those given by -mcustom-fpu-cfg=, regardless of the
order of the options on the command line.

Note that you can gain more local control over selection of a FPU configuration by using the "target("custom-fpu-cfg=name")" function
attribute or pragma.

These additional -m options are available for the Altera Nios II ELF (bare-metal) target:

-mhal
Link with HAL BSP. This suppresses linking with the GCC-provided C runtime startup and termination code, and is typically used in
conjunction with -msys-crt0= to specify the location of the alternate startup code provided by the HAL BSP.

-msmallc
Link with a limited version of the C library, -lsmallc, rather than Newlib.

-msys-crt0=startfile
startfile is the file name of the startfile (crt0) to use when linking. This option is only useful in conjunction with -mhal.

-msys-lib=systemlib
systemlib is the library name of the library that provides low-level system calls required by the C library, e.g. "read" and "write".
This option is typically used to link with a library provided by a HAL BSP.

Nvidia PTX Options

These options are defined for Nvidia PTX:

-m32
-m64
Generate code for 32-bit or 64-bit ABI.

-mmainkernel
Link in code for a __main kernel. This is for stand-alone instead of offloading execution.

-moptimize
Apply partitioned execution optimizations. This is the default when any level of optimization is selected.

-msoft-stack
Generate code that does not use ".local" memory directly for stack storage. Instead, a per-warp stack pointer is maintained explicitly.
This enables variable-length stack allocation (with variable-length arrays or "alloca"), and when global memory is used for underlying
storage, makes it possible to access automatic variables from other threads, or with atomic instructions. This code generation variant
is used for OpenMP offloading, but the option is exposed on its own for the purpose of testing the compiler; to generate code suitable
for linking into programs using OpenMP offloading, use option -mgomp.

-muniform-simt
Switch to code generation variant that allows to execute all threads in each warp, while maintaining memory state and side effects as
if only one thread in each warp was active outside of OpenMP SIMD regions. All atomic operations and calls to runtime (malloc, free,
vprintf) are conditionally executed (iff current lane index equals the master lane index), and the register being assigned is copied
via a shuffle instruction from the master lane. Outside of SIMD regions lane 0 is the master; inside, each thread sees itself as the
master. Shared memory array "int __nvptx_uni[]" stores all-zeros or all-ones bitmasks for each warp, indicating current mode (0
outside of SIMD regions). Each thread can bitwise-and the bitmask at position "tid.y" with current lane index to compute the master
lane index.

-mgomp
Generate code for use in OpenMP offloading: enables -msoft-stack and -muniform-simt options, and selects corresponding multilib
variant.

PDP-11 Options

These options are defined for the PDP-11:

-mfpu
Use hardware FPP floating point. This is the default. (FIS floating point on the PDP-11/40 is not supported.)

-msoft-float
Do not use hardware floating point.

-mac0
Return floating-point results in ac0 (fr0 in Unix assembler syntax).

-mno-ac0
Return floating-point results in memory. This is the default.

-m40
Generate code for a PDP-11/40.

-m45
Generate code for a PDP-11/45. This is the default.

-m10
Generate code for a PDP-11/10.

-mbcopy-builtin
Use inline "movmemhi" patterns for copying memory. This is the default.

-mbcopy
Do not use inline "movmemhi" patterns for copying memory.

-mint16
-mno-int32
Use 16-bit "int". This is the default.

-mint32
-mno-int16
Use 32-bit "int".

-mfloat64
-mno-float32
Use 64-bit "float". This is the default.

-mfloat32
-mno-float64
Use 32-bit "float".

-mabshi
Use "abshi2" pattern. This is the default.

-mno-abshi
Do not use "abshi2" pattern.

-mbranch-expensive
Pretend that branches are expensive. This is for experimenting with code generation only.

-mbranch-cheap
Do not pretend that branches are expensive. This is the default.

-munix-asm
Use Unix assembler syntax. This is the default when configured for pdp11-*-bsd.

-mdec-asm
Use DEC assembler syntax. This is the default when configured for any PDP-11 target other than pdp11-*-bsd.

picoChip Options

These -m options are defined for picoChip implementations:

-mae=ae_type
Set the instruction set, register set, and instruction scheduling parameters for array element type ae_type. Supported values for
ae_type are ANY, MUL, and MAC.

-mae=ANY selects a completely generic AE type. Code generated with this option runs on any of the other AE types. The code is not as
efficient as it would be if compiled for a specific AE type, and some types of operation (e.g., multiplication) do not work properly on
all types of AE.

-mae=MUL selects a MUL AE type. This is the most useful AE type for compiled code, and is the default.

-mae=MAC selects a DSP-style MAC AE. Code compiled with this option may suffer from poor performance of byte (char) manipulation,
since the DSP AE does not provide hardware support for byte load/stores.

-msymbol-as-address
Enable the compiler to directly use a symbol name as an address in a load/store instruction, without first loading it into a register.
Typically, the use of this option generates larger programs, which run faster than when the option isn't used. However, the results
vary from program to program, so it is left as a user option, rather than being permanently enabled.

-mno-inefficient-warnings
Disables warnings about the generation of inefficient code. These warnings can be generated, for example, when compiling code that
performs byte-level memory operations on the MAC AE type. The MAC AE has no hardware support for byte-level memory operations, so all
byte load/stores must be synthesized from word load/store operations. This is inefficient and a warning is generated to indicate that
you should rewrite the code to avoid byte operations, or to target an AE type that has the necessary hardware support. This option
disables these warnings.

PowerPC Options

These are listed under

RISC-V Options

These command-line options are defined for RISC-V targets:

-mbranch-cost=n
Set the cost of branches to roughly n instructions.

-mplt
-mno-plt
When generating PIC code, do or don't allow the use of PLTs. Ignored for non-PIC. The default is -mplt.

-mabi=ABI-string
Specify integer and floating-point calling convention. ABI-string contains two parts: the size of integer types and the registers used
for floating-point types. For example -march=rv64ifd -mabi=lp64d means that long and pointers are 64-bit (implicitly defining int to
be 32-bit), and that floating-point values up to 64 bits wide are passed in F registers. Contrast this with -march=rv64ifd
-mabi=lp64f, which still allows the compiler to generate code that uses the F and D extensions but only allows floating-point values up
to 32 bits long to be passed in registers; or -march=rv64ifd -mabi=lp64, in which no floating-point arguments will be passed in
registers.

The default for this argument is system dependent, users who want a specific calling convention should specify one explicitly. The
valid calling conventions are: ilp32, ilp32f, ilp32d, lp64, lp64f, and lp64d. Some calling conventions are impossible to implement on
some ISAs: for example, -march=rv32if -mabi=ilp32d is invalid because the ABI requires 64-bit values be passed in F registers, but F
registers are only 32 bits wide.

-mfdiv
-mno-fdiv
Do or don't use hardware floating-point divide and square root instructions. This requires the F or D extensions for floating-point
registers. The default is to use them if the specified architecture has these instructions.

-mdiv
-mno-div
Do or don't use hardware instructions for integer division. This requires the M extension. The default is to use them if the
specified architecture has these instructions.

-march=ISA-string
Generate code for given RISC-V ISA (e.g. rv64im). ISA strings must be lower-case. Examples include rv64i, rv32g, and rv32imaf.

-mtune=processor-string
Optimize the output for the given processor, specified by microarchitecture name.

-msmall-data-limit=n
Put global and static data smaller than n bytes into a special section (on some targets).

-msave-restore
-mno-save-restore
Do or don't use smaller but slower prologue and epilogue code that uses library function calls. The default is to use fast inline
prologues and epilogues.

-mstrict-align
-mno-strict-align
Do not or do generate unaligned memory accesses. The default is set depending on whether the processor we are optimizing for supports
fast unaligned access or not.

-mcmodel=medlow
Generate code for the medium-low code model. The program and its statically defined symbols must lie within a single 2 GiB address
range and must lie between absolute addresses -2 GiB and +2 GiB. Programs can be statically or dynamically linked. This is the default
code model.

-mcmodel=medany
Generate code for the medium-any code model. The program and its statically defined symbols must be within any single 2 GiB address
range. Programs can be statically or dynamically linked.

-mexplicit-relocs
-mno-exlicit-relocs
Use or do not use assembler relocation operators when dealing with symbolic addresses. The alternative is to use assembler macros
instead, which may limit optimization.

RL78 Options

-msim
Links in additional target libraries to support operation within a simulator.

-mmul=none
-mmul=g10
-mmul=g13
-mmul=g14
-mmul=rl78
Specifies the type of hardware multiplication and division support to be used. The simplest is "none", which uses software for both
multiplication and division. This is the default. The "g13" value is for the hardware multiply/divide peripheral found on the
RL78/G13 (S2 core) targets. The "g14" value selects the use of the multiplication and division instructions supported by the RL78/G14
(S3 core) parts. The value "rl78" is an alias for "g14" and the value "mg10" is an alias for "none".

In addition a C preprocessor macro is defined, based upon the setting of this option. Possible values are: "__RL78_MUL_NONE__",
"__RL78_MUL_G13__" or "__RL78_MUL_G14__".

-mcpu=g10
-mcpu=g13
-mcpu=g14
-mcpu=rl78
Specifies the RL78 core to target. The default is the G14 core, also known as an S3 core or just RL78. The G13 or S2 core does not
have multiply or divide instructions, instead it uses a hardware peripheral for these operations. The G10 or S1 core does not have
register banks, so it uses a different calling convention.

If this option is set it also selects the type of hardware multiply support to use, unless this is overridden by an explicit -mmul=none
option on the command line. Thus specifying -mcpu=g13 enables the use of the G13 hardware multiply peripheral and specifying -mcpu=g10
disables the use of hardware multiplications altogether.

Note, although the RL78/G14 core is the default target, specifying -mcpu=g14 or -mcpu=rl78 on the command line does change the behavior
of the toolchain since it also enables G14 hardware multiply support. If these options are not specified on the command line then
software multiplication routines will be used even though the code targets the RL78 core. This is for backwards compatibility with
older toolchains which did not have hardware multiply and divide support.

In addition a C preprocessor macro is defined, based upon the setting of this option. Possible values are: "__RL78_G10__",
"__RL78_G13__" or "__RL78_G14__".

-mg10
-mg13
-mg14
-mrl78
These are aliases for the corresponding -mcpu= option. They are provided for backwards compatibility.

-mallregs
Allow the compiler to use all of the available registers. By default registers "r24..r31" are reserved for use in interrupt handlers.
With this option enabled these registers can be used in ordinary functions as well.

-m64bit-doubles
-m32bit-doubles
Make the "double" data type be 64 bits (-m64bit-doubles) or 32 bits (-m32bit-doubles) in size. The default is -m32bit-doubles.

-msave-mduc-in-interrupts
-mno-save-mduc-in-interrupts
Specifies that interrupt handler functions should preserve the MDUC registers. This is only necessary if normal code might use the
MDUC registers, for example because it performs multiplication and division operations. The default is to ignore the MDUC registers as
this makes the interrupt handlers faster. The target option -mg13 needs to be passed for this to work as this feature is only
available on the G13 target (S2 core). The MDUC registers will only be saved if the interrupt handler performs a multiplication or
division operation or it calls another function.

IBM RS/6000 and PowerPC Options

These -m options are defined for the IBM RS/6000 and PowerPC:

-mpowerpc-gpopt
-mno-powerpc-gpopt
-mpowerpc-gfxopt
-mno-powerpc-gfxopt
-mpowerpc64
-mno-powerpc64
-mmfcrf
-mno-mfcrf
-mpopcntb
-mno-popcntb
-mpopcntd
-mno-popcntd
-mfprnd
-mno-fprnd
-mcmpb
-mno-cmpb
-mmfpgpr
-mno-mfpgpr
-mhard-dfp
-mno-hard-dfp
You use these options to specify which instructions are available on the processor you are using. The default value of these options
is determined when configuring GCC. Specifying the -mcpu=cpu_type overrides the specification of these options. We recommend you use
the -mcpu=cpu_type option rather than the options listed above.

Specifying -mpowerpc-gpopt allows GCC to use the optional PowerPC architecture instructions in the General Purpose group, including
floating-point square root. Specifying -mpowerpc-gfxopt allows GCC to use the optional PowerPC architecture instructions in the
Graphics group, including floating-point select.

The -mmfcrf option allows GCC to generate the move from condition register field instruction implemented on the POWER4 processor and
other processors that support the PowerPC V2.01 architecture. The -mpopcntb option allows GCC to generate the popcount and double-
precision FP reciprocal estimate instruction implemented on the POWER5 processor and other processors that support the PowerPC V2.02
architecture. The -mpopcntd option allows GCC to generate the popcount instruction implemented on the POWER7 processor and other
processors that support the PowerPC V2.06 architecture. The -mfprnd option allows GCC to generate the FP round to integer instructions
implemented on the POWER5+ processor and other processors that support the PowerPC V2.03 architecture. The -mcmpb option allows GCC to
generate the compare bytes instruction implemented on the POWER6 processor and other processors that support the PowerPC V2.05
architecture. The -mmfpgpr option allows GCC to generate the FP move to/from general-purpose register instructions implemented on the
POWER6X processor and other processors that support the extended PowerPC V2.05 architecture. The -mhard-dfp option allows GCC to
generate the decimal floating-point instructions implemented on some POWER processors.

The -mpowerpc64 option allows GCC to generate the additional 64-bit instructions that are found in the full PowerPC64 architecture and
to treat GPRs as 64-bit, doubleword quantities. GCC defaults to -mno-powerpc64.

-mcpu=cpu_type
Set architecture type, register usage, and instruction scheduling parameters for machine type cpu_type. Supported values for cpu_type
are 401, 403, 405, 405fp, 440, 440fp, 464, 464fp, 476, 476fp, 505, 601, 602, 603, 603e, 604, 604e, 620, 630, 740, 7400, 7450, 750, 801,
821, 823, 860, 970, 8540, a2, e300c2, e300c3, e500mc, e500mc64, e5500, e6500, ec603e, G3, G4, G5, titan, power3, power4, power5,
power5+, power6, power6x, power7, power8, power9, powerpc, powerpc64, powerpc64le, and rs64.

-mcpu=powerpc, -mcpu=powerpc64, and -mcpu=powerpc64le specify pure 32-bit PowerPC (either endian), 64-bit big endian PowerPC and 64-bit
little endian PowerPC architecture machine types, with an appropriate, generic processor model assumed for scheduling purposes.

The other options specify a specific processor. Code generated under those options runs best on that processor, and may not run at all
on others.

The -mcpu options automatically enable or disable the following options:

-maltivec -mfprnd -mhard-float -mmfcrf -mmultiple -mpopcntb -mpopcntd -mpowerpc64 -mpowerpc-gpopt -mpowerpc-gfxopt
-msingle-float -mdouble-float -msimple-fpu -mstring -mmulhw -mdlmzb -mmfpgpr -mvsx -mcrypto -mdirect-move -mhtm -mpower8-fusion
-mpower8-vector -mquad-memory -mquad-memory-atomic -mfloat128 -mfloat128-hardware

The particular options set for any particular CPU varies between compiler versions, depending on what setting seems to produce optimal
code for that CPU; it doesn't necessarily reflect the actual hardware's capabilities. If you wish to set an individual option to a
particular value, you may specify it after the -mcpu option, like -mcpu=970 -mno-altivec.

On AIX, the -maltivec and -mpowerpc64 options are not enabled or disabled by the -mcpu option at present because AIX does not have full
support for these options. You may still enable or disable them individually if you're sure it'll work in your environment.

-mtune=cpu_type
Set the instruction scheduling parameters for machine type cpu_type, but do not set the architecture type or register usage, as
-mcpu=cpu_type does. The same values for cpu_type are used for -mtune as for -mcpu. If both are specified, the code generated uses
the architecture and registers set by -mcpu, but the scheduling parameters set by -mtune.

-mcmodel=small
Generate PowerPC64 code for the small model: The TOC is limited to 64k.

-mcmodel=medium
Generate PowerPC64 code for the medium model: The TOC and other static data may be up to a total of 4G in size. This is the default
for 64-bit Linux.

-mcmodel=large
Generate PowerPC64 code for the large model: The TOC may be up to 4G in size. Other data and code is only limited by the 64-bit
address space.

-maltivec
-mno-altivec
Generate code that uses (does not use) AltiVec instructions, and also enable the use of built-in functions that allow more direct
access to the AltiVec instruction set. You may also need to set -mabi=altivec to adjust the current ABI with AltiVec ABI enhancements.

When -maltivec is used, rather than -maltivec=le or -maltivec=be, the element order for AltiVec intrinsics such as "vec_splat",
"vec_extract", and "vec_insert" match array element order corresponding to the endianness of the target. That is, element zero
identifies the leftmost element in a vector register when targeting a big-endian platform, and identifies the rightmost element in a
vector register when targeting a little-endian platform.

-maltivec=be
Generate AltiVec instructions using big-endian element order, regardless of whether the target is big- or little-endian. This is the
default when targeting a big-endian platform.

The element order is used to interpret element numbers in AltiVec intrinsics such as "vec_splat", "vec_extract", and "vec_insert". By
default, these match array element order corresponding to the endianness for the target.

-maltivec=le
Generate AltiVec instructions using little-endian element order, regardless of whether the target is big- or little-endian. This is
the default when targeting a little-endian platform. This option is currently ignored when targeting a big-endian platform.

-mvrsave
-mno-vrsave
Generate VRSAVE instructions when generating AltiVec code.

-mgen-cell-microcode
Generate Cell microcode instructions.

-mwarn-cell-microcode
Warn when a Cell microcode instruction is emitted. An example of a Cell microcode instruction is a variable shift.

-msecure-plt
Generate code that allows ld and ld.so to build executables and shared libraries with non-executable ".plt" and ".got" sections. This
is a PowerPC 32-bit SYSV ABI option.

-mbss-plt
Generate code that uses a BSS ".plt" section that ld.so fills in, and requires ".plt" and ".got" sections that are both writable and
executable. This is a PowerPC 32-bit SYSV ABI option.

-misel
-mno-isel
This switch enables or disables the generation of ISEL instructions.

-misel=yes/no
This switch has been deprecated. Use -misel and -mno-isel instead.

-mlra
Enable Local Register Allocation. By default the port uses LRA. (i.e. -mno-lra).

-mspe
-mno-spe
This switch enables or disables the generation of SPE simd instructions.

-mpaired
-mno-paired
This switch enables or disables the generation of PAIRED simd instructions.

-mspe=yes/no
This option has been deprecated. Use -mspe and -mno-spe instead.

-mvsx
-mno-vsx
Generate code that uses (does not use) vector/scalar (VSX) instructions, and also enable the use of built-in functions that allow more
direct access to the VSX instruction set.

-mcrypto
-mno-crypto
Enable the use (disable) of the built-in functions that allow direct access to the cryptographic instructions that were added in
version 2.07 of the PowerPC ISA.

-mdirect-move
-mno-direct-move
Generate code that uses (does not use) the instructions to move data between the general purpose registers and the vector/scalar (VSX)
registers that were added in version 2.07 of the PowerPC ISA.

-mhtm
-mno-htm
Enable (disable) the use of the built-in functions that allow direct access to the Hardware Transactional Memory (HTM) instructions
that were added in version 2.07 of the PowerPC ISA.

-mpower8-fusion
-mno-power8-fusion
Generate code that keeps (does not keeps) some integer operations adjacent so that the instructions can be fused together on power8 and
later processors.

-mpower8-vector
-mno-power8-vector
Generate code that uses (does not use) the vector and scalar instructions that were added in version 2.07 of the PowerPC ISA. Also
enable the use of built-in functions that allow more direct access to the vector instructions.

-mquad-memory
-mno-quad-memory
Generate code that uses (does not use) the non-atomic quad word memory instructions. The -mquad-memory option requires use of 64-bit
mode.

-mquad-memory-atomic
-mno-quad-memory-atomic
Generate code that uses (does not use) the atomic quad word memory instructions. The -mquad-memory-atomic option requires use of
64-bit mode.

-mupper-regs-di
-mno-upper-regs-di
Generate code that uses (does not use) the scalar instructions that target all 64 registers in the vector/scalar floating point
register set that were added in version 2.06 of the PowerPC ISA when processing integers. -mupper-regs-di is turned on by default if
you use any of the -mcpu=power7, -mcpu=power8, -mcpu=power9, or -mvsx options.

-mupper-regs-df
-mno-upper-regs-df
Generate code that uses (does not use) the scalar double precision instructions that target all 64 registers in the vector/scalar
floating point register set that were added in version 2.06 of the PowerPC ISA. -mupper-regs-df is turned on by default if you use any
of the -mcpu=power7, -mcpu=power8, -mcpu=power9, or -mvsx options.

-mupper-regs-sf
-mno-upper-regs-sf
Generate code that uses (does not use) the scalar single precision instructions that target all 64 registers in the vector/scalar
floating point register set that were added in version 2.07 of the PowerPC ISA. -mupper-regs-sf is turned on by default if you use
either of the -mcpu=power8, -mpower8-vector, or -mcpu=power9 options.

-mupper-regs
-mno-upper-regs
Generate code that uses (does not use) the scalar instructions that target all 64 registers in the vector/scalar floating point
register set, depending on the model of the machine.

If the -mno-upper-regs option is used, it turns off both -mupper-regs-sf and -mupper-regs-df options.

-mfloat128
-mno-float128
Enable/disable the __float128 keyword for IEEE 128-bit floating point and use either software emulation for IEEE 128-bit floating point
or hardware instructions.

The VSX instruction set (-mvsx, -mcpu=power7, or -mcpu=power8) must be enabled to use the -mfloat128 option. The -mfloat128 option
only works on PowerPC 64-bit Linux systems.

If you use the ISA 3.0 instruction set (-mcpu=power9), the -mfloat128 option will also enable the generation of ISA 3.0 IEEE 128-bit
floating point instructions. Otherwise, IEEE 128-bit floating point will be done with software emulation.

-mfloat128-hardware
-mno-float128-hardware
Enable/disable using ISA 3.0 hardware instructions to support the __float128 data type.

If you use -mfloat128-hardware, it will enable the option -mfloat128 as well.

If you select ISA 3.0 instructions with -mcpu=power9, but do not use either -mfloat128 or -mfloat128-hardware, the IEEE 128-bit
floating point support will not be enabled.

-mfloat-gprs=yes/single/double/no
-mfloat-gprs
This switch enables or disables the generation of floating-point operations on the general-purpose registers for architectures that
support it.

The argument yes or single enables the use of single-precision floating-point operations.

The argument double enables the use of single and double-precision floating-point operations.

The argument no disables floating-point operations on the general-purpose registers.

This option is currently only available on the MPC854x.

-m32
-m64
Generate code for 32-bit or 64-bit environments of Darwin and SVR4 targets (including GNU/Linux). The 32-bit environment sets int,
long and pointer to 32 bits and generates code that runs on any PowerPC variant. The 64-bit environment sets int to 32 bits and long
and pointer to 64 bits, and generates code for PowerPC64, as for -mpowerpc64.

-mfull-toc
-mno-fp-in-toc
-mno-sum-in-toc
-mminimal-toc
Modify generation of the TOC (Table Of Contents), which is created for every executable file. The -mfull-toc option is selected by
default. In that case, GCC allocates at least one TOC entry for each unique non-automatic variable reference in your program. GCC
also places floating-point constants in the TOC. However, only 16,384 entries are available in the TOC.

If you receive a linker error message that saying you have overflowed the available TOC space, you can reduce the amount of TOC space
used with the -mno-fp-in-toc and -mno-sum-in-toc options. -mno-fp-in-toc prevents GCC from putting floating-point constants in the TOC
and -mno-sum-in-toc forces GCC to generate code to calculate the sum of an address and a constant at run time instead of putting that
sum into the TOC. You may specify one or both of these options. Each causes GCC to produce very slightly slower and larger code at
the expense of conserving TOC space.

If you still run out of space in the TOC even when you specify both of these options, specify -mminimal-toc instead. This option
causes GCC to make only one TOC entry for every file. When you specify this option, GCC produces code that is slower and larger but
which uses extremely little TOC space. You may wish to use this option only on files that contain less frequently-executed code.

-maix64
-maix32
Enable 64-bit AIX ABI and calling convention: 64-bit pointers, 64-bit "long" type, and the infrastructure needed to support them.
Specifying -maix64 implies -mpowerpc64, while -maix32 disables the 64-bit ABI and implies -mno-powerpc64. GCC defaults to -maix32.

-mxl-compat
-mno-xl-compat
Produce code that conforms more closely to IBM XL compiler semantics when using AIX-compatible ABI. Pass floating-point arguments to
prototyped functions beyond the register save area (RSA) on the stack in addition to argument FPRs. Do not assume that most
significant double in 128-bit long double value is properly rounded when comparing values and converting to double. Use XL symbol
names for long double support routines.

The AIX calling convention was extended but not initially documented to handle an obscure K&R C case of calling a function that takes
the address of its arguments with fewer arguments than declared. IBM XL compilers access floating-point arguments that do not fit in
the RSA from the stack when a subroutine is compiled without optimization. Because always storing floating-point arguments on the
stack is inefficient and rarely needed, this option is not enabled by default and only is necessary when calling subroutines compiled
by IBM XL compilers without optimization.

-mpe
Support IBM RS/6000 SP Parallel Environment (PE). Link an application written to use message passing with special startup code to
enable the application to run. The system must have PE installed in the standard location (/usr/lpp/ppe.poe/), or the specs file must
be overridden with the -specs= option to specify the appropriate directory location. The Parallel Environment does not support
threads, so the -mpe option and the -pthread option are incompatible.

-malign-natural
-malign-power
On AIX, 32-bit Darwin, and 64-bit PowerPC GNU/Linux, the option -malign-natural overrides the ABI-defined alignment of larger types,
such as floating-point doubles, on their natural size-based boundary. The option -malign-power instructs GCC to follow the ABI-
specified alignment rules. GCC defaults to the standard alignment defined in the ABI.

On 64-bit Darwin, natural alignment is the default, and -malign-power is not supported.

-msoft-float
-mhard-float
Generate code that does not use (uses) the floating-point register set. Software floating-point emulation is provided if you use the
-msoft-float option, and pass the option to GCC when linking.

-msingle-float
-mdouble-float
Generate code for single- or double-precision floating-point operations. -mdouble-float implies -msingle-float.

-msimple-fpu
Do not generate "sqrt" and "div" instructions for hardware floating-point unit.

-mfpu=name
Specify type of floating-point unit. Valid values for name are sp_lite (equivalent to -msingle-float -msimple-fpu), dp_lite
(equivalent to -mdouble-float -msimple-fpu), sp_full (equivalent to -msingle-float), and dp_full (equivalent to -mdouble-float).

-mxilinx-fpu
Perform optimizations for the floating-point unit on Xilinx PPC 405/440.

-mmultiple
-mno-multiple
Generate code that uses (does not use) the load multiple word instructions and the store multiple word instructions. These
instructions are generated by default on POWER systems, and not generated on PowerPC systems. Do not use -mmultiple on little-endian
PowerPC systems, since those instructions do not work when the processor is in little-endian mode. The exceptions are PPC740 and
PPC750 which permit these instructions in little-endian mode.

-mstring
-mno-string
Generate code that uses (does not use) the load string instructions and the store string word instructions to save multiple registers
and do small block moves. These instructions are generated by default on POWER systems, and not generated on PowerPC systems. Do not
use -mstring on little-endian PowerPC systems, since those instructions do not work when the processor is in little-endian mode. The
exceptions are PPC740 and PPC750 which permit these instructions in little-endian mode.

-mupdate
-mno-update
Generate code that uses (does not use) the load or store instructions that update the base register to the address of the calculated
memory location. These instructions are generated by default. If you use -mno-update, there is a small window between the time that
the stack pointer is updated and the address of the previous frame is stored, which means code that walks the stack frame across
interrupts or signals may get corrupted data.

-mavoid-indexed-addresses
-mno-avoid-indexed-addresses
Generate code that tries to avoid (not avoid) the use of indexed load or store instructions. These instructions can incur a performance
penalty on Power6 processors in certain situations, such as when stepping through large arrays that cross a 16M boundary. This option
is enabled by default when targeting Power6 and disabled otherwise.

-mfused-madd
-mno-fused-madd
Generate code that uses (does not use) the floating-point multiply and accumulate instructions. These instructions are generated by
default if hardware floating point is used. The machine-dependent -mfused-madd option is now mapped to the machine-independent
-ffp-contract=fast option, and -mno-fused-madd is mapped to -ffp-contract=off.

-mmulhw
-mno-mulhw
Generate code that uses (does not use) the half-word multiply and multiply-accumulate instructions on the IBM 405, 440, 464 and 476
processors. These instructions are generated by default when targeting those processors.

-mdlmzb
-mno-dlmzb
Generate code that uses (does not use) the string-search dlmzb instruction on the IBM 405, 440, 464 and 476 processors. This
instruction is generated by default when targeting those processors.

-mno-bit-align
-mbit-align
On System V.4 and embedded PowerPC systems do not (do) force structures and unions that contain bit-fields to be aligned to the base
type of the bit-field.

For example, by default a structure containing nothing but 8 "unsigned" bit-fields of length 1 is aligned to a 4-byte boundary and has
a size of 4 bytes. By using -mno-bit-align, the structure is aligned to a 1-byte boundary and is 1 byte in size.

-mno-strict-align
-mstrict-align
On System V.4 and embedded PowerPC systems do not (do) assume that unaligned memory references are handled by the system.

-mrelocatable
-mno-relocatable
Generate code that allows (does not allow) a static executable to be relocated to a different address at run time. A simple embedded
PowerPC system loader should relocate the entire contents of ".got2" and 4-byte locations listed in the ".fixup" section, a table of
32-bit addresses generated by this option. For this to work, all objects linked together must be compiled with -mrelocatable or
-mrelocatable-lib. -mrelocatable code aligns the stack to an 8-byte boundary.

-mrelocatable-lib
-mno-relocatable-lib
Like -mrelocatable, -mrelocatable-lib generates a ".fixup" section to allow static executables to be relocated at run time, but
-mrelocatable-lib does not use the smaller stack alignment of -mrelocatable. Objects compiled with -mrelocatable-lib may be linked
with objects compiled with any combination of the -mrelocatable options.

-mno-toc
-mtoc
On System V.4 and embedded PowerPC systems do not (do) assume that register 2 contains a pointer to a global area pointing to the
addresses used in the program.

-mlittle
-mlittle-endian
On System V.4 and embedded PowerPC systems compile code for the processor in little-endian mode. The -mlittle-endian option is the
same as -mlittle.

-mbig
-mbig-endian
On System V.4 and embedded PowerPC systems compile code for the processor in big-endian mode. The -mbig-endian option is the same as
-mbig.

-mdynamic-no-pic
On Darwin and Mac OS X systems, compile code so that it is not relocatable, but that its external references are relocatable. The
resulting code is suitable for applications, but not shared libraries.

-mprioritize-restricted-insns=priority
This option controls the priority that is assigned to dispatch-slot restricted instructions during the second scheduling pass. The
argument priority takes the value 0, 1, or 2 to assign no, highest, or second-highest (respectively) priority to dispatch-slot
restricted instructions.

-msched-costly-dep=dependence_type
This option controls which dependences are considered costly by the target during instruction scheduling. The argument dependence_type
takes one of the following values:

no No dependence is costly.

all All dependences are costly.

true_store_to_load
A true dependence from store to load is costly.

store_to_load
Any dependence from store to load is costly.

number
Any dependence for which the latency is greater than or equal to number is costly.

-minsert-sched-nops=scheme
This option controls which NOP insertion scheme is used during the second scheduling pass. The argument scheme takes one of the
following values:

no Don't insert NOPs.

pad Pad with NOPs any dispatch group that has vacant issue slots, according to the scheduler's grouping.

regroup_exact
Insert NOPs to force costly dependent insns into separate groups. Insert exactly as many NOPs as needed to force an insn to a new
group, according to the estimated processor grouping.

number
Insert NOPs to force costly dependent insns into separate groups. Insert number NOPs to force an insn to a new group.

-mcall-sysv
On System V.4 and embedded PowerPC systems compile code using calling conventions that adhere to the March 1995 draft of the System V
Application Binary Interface, PowerPC processor supplement. This is the default unless you configured GCC using powerpc-*-eabiaix.

-mcall-sysv-eabi
-mcall-eabi
Specify both -mcall-sysv and -meabi options.

-mcall-sysv-noeabi
Specify both -mcall-sysv and -mno-eabi options.

-mcall-aixdesc
On System V.4 and embedded PowerPC systems compile code for the AIX operating system.

-mcall-linux
On System V.4 and embedded PowerPC systems compile code for the Linux-based GNU system.

-mcall-freebsd
On System V.4 and embedded PowerPC systems compile code for the FreeBSD operating system.

-mcall-netbsd
On System V.4 and embedded PowerPC systems compile code for the NetBSD operating system.

-mcall-openbsd
On System V.4 and embedded PowerPC systems compile code for the OpenBSD operating system.

-maix-struct-return
Return all structures in memory (as specified by the AIX ABI).

-msvr4-struct-return
Return structures smaller than 8 bytes in registers (as specified by the SVR4 ABI).

-mabi=abi-type
Extend the current ABI with a particular extension, or remove such extension. Valid values are altivec, no-altivec, spe, no-spe,
ibmlongdouble, ieeelongdouble, elfv1, elfv2.

-mabi=spe
Extend the current ABI with SPE ABI extensions. This does not change the default ABI, instead it adds the SPE ABI extensions to the
current ABI.

-mabi=no-spe
Disable Book-E SPE ABI extensions for the current ABI.

-mabi=ibmlongdouble
Change the current ABI to use IBM extended-precision long double. This is a PowerPC 32-bit SYSV ABI option.

-mabi=ieeelongdouble
Change the current ABI to use IEEE extended-precision long double. This is a PowerPC 32-bit Linux ABI option.

-mabi=elfv1
Change the current ABI to use the ELFv1 ABI. This is the default ABI for big-endian PowerPC 64-bit Linux. Overriding the default ABI
requires special system support and is likely to fail in spectacular ways.

-mabi=elfv2
Change the current ABI to use the ELFv2 ABI. This is the default ABI for little-endian PowerPC 64-bit Linux. Overriding the default
ABI requires special system support and is likely to fail in spectacular ways.

-mgnu-attribute
-mno-gnu-attribute
Emit .gnu_attribute assembly directives to set tag/value pairs in a .gnu.attributes section that specify ABI variations in function
parameters or return values.

-mprototype
-mno-prototype
On System V.4 and embedded PowerPC systems assume that all calls to variable argument functions are properly prototyped. Otherwise,
the compiler must insert an instruction before every non-prototyped call to set or clear bit 6 of the condition code register ("CR") to
indicate whether floating-point values are passed in the floating-point registers in case the function takes variable arguments. With
-mprototype, only calls to prototyped variable argument functions set or clear the bit.

-msim
On embedded PowerPC systems, assume that the startup module is called sim-crt0.o and that the standard C libraries are libsim.a and
libc.a. This is the default for powerpc-*-eabisim configurations.

-mmvme
On embedded PowerPC systems, assume that the startup module is called crt0.o and the standard C libraries are libmvme.a and libc.a.

-mads
On embedded PowerPC systems, assume that the startup module is called crt0.o and the standard C libraries are libads.a and libc.a.

-myellowknife
On embedded PowerPC systems, assume that the startup module is called crt0.o and the standard C libraries are libyk.a and libc.a.

-mvxworks
On System V.4 and embedded PowerPC systems, specify that you are compiling for a VxWorks system.

-memb
On embedded PowerPC systems, set the "PPC_EMB" bit in the ELF flags header to indicate that eabi extended relocations are used.

-meabi
-mno-eabi
On System V.4 and embedded PowerPC systems do (do not) adhere to the Embedded Applications Binary Interface (EABI), which is a set of
modifications to the System V.4 specifications. Selecting -meabi means that the stack is aligned to an 8-byte boundary, a function
"__eabi" is called from "main" to set up the EABI environment, and the -msdata option can use both "r2" and "r13" to point to two
separate small data areas. Selecting -mno-eabi means that the stack is aligned to a 16-byte boundary, no EABI initialization function
is called from "main", and the -msdata option only uses "r13" to point to a single small data area. The -meabi option is on by default
if you configured GCC using one of the powerpc*-*-eabi* options.

-msdata=eabi
On System V.4 and embedded PowerPC systems, put small initialized "const" global and static data in the ".sdata2" section, which is
pointed to by register "r2". Put small initialized non-"const" global and static data in the ".sdata" section, which is pointed to by
register "r13". Put small uninitialized global and static data in the ".sbss" section, which is adjacent to the ".sdata" section. The
-msdata=eabi option is incompatible with the -mrelocatable option. The -msdata=eabi option also sets the -memb option.

-msdata=sysv
On System V.4 and embedded PowerPC systems, put small global and static data in the ".sdata" section, which is pointed to by register
"r13". Put small uninitialized global and static data in the ".sbss" section, which is adjacent to the ".sdata" section. The
-msdata=sysv option is incompatible with the -mrelocatable option.

-msdata=default
-msdata
On System V.4 and embedded PowerPC systems, if -meabi is used, compile code the same as -msdata=eabi, otherwise compile code the same
as -msdata=sysv.

-msdata=data
On System V.4 and embedded PowerPC systems, put small global data in the ".sdata" section. Put small uninitialized global data in the
".sbss" section. Do not use register "r13" to address small data however. This is the default behavior unless other -msdata options
are used.

-msdata=none
-mno-sdata
On embedded PowerPC systems, put all initialized global and static data in the ".data" section, and all uninitialized data in the
".bss" section.

-mreadonly-in-sdata
-mreadonly-in-sdata
Put read-only objects in the ".sdata" section as well. This is the default.

-mblock-move-inline-limit=num
Inline all block moves (such as calls to "memcpy" or structure copies) less than or equal to num bytes. The minimum value for num is
32 bytes on 32-bit targets and 64 bytes on 64-bit targets. The default value is target-specific.

-G num
On embedded PowerPC systems, put global and static items less than or equal to num bytes into the small data or BSS sections instead of
the normal data or BSS section. By default, num is 8. The -G num switch is also passed to the linker. All modules should be compiled
with the same -G num value.

-mregnames
-mno-regnames
On System V.4 and embedded PowerPC systems do (do not) emit register names in the assembly language output using symbolic forms.

-mlongcall
-mno-longcall
By default assume that all calls are far away so that a longer and more expensive calling sequence is required. This is required for
calls farther than 32 megabytes (33,554,432 bytes) from the current location. A short call is generated if the compiler knows the call
cannot be that far away. This setting can be overridden by the "shortcall" function attribute, or by "#pragma longcall(0)".

Some linkers are capable of detecting out-of-range calls and generating glue code on the fly. On these systems, long calls are
unnecessary and generate slower code. As of this writing, the AIX linker can do this, as can the GNU linker for PowerPC/64. It is
planned to add this feature to the GNU linker for 32-bit PowerPC systems as well.

On Darwin/PPC systems, "#pragma longcall" generates "jbsr callee, L42", plus a branch island (glue code). The two target addresses
represent the callee and the branch island. The Darwin/PPC linker prefers the first address and generates a "bl callee" if the PPC
"bl" instruction reaches the callee directly; otherwise, the linker generates "bl L42" to call the branch island. The branch island is
appended to the body of the calling function; it computes the full 32-bit address of the callee and jumps to it.

On Mach-O (Darwin) systems, this option directs the compiler emit to the glue for every direct call, and the Darwin linker decides
whether to use or discard it.

In the future, GCC may ignore all longcall specifications when the linker is known to generate glue.

-mtls-markers
-mno-tls-markers
Mark (do not mark) calls to "__tls_get_addr" with a relocation specifying the function argument. The relocation allows the linker to
reliably associate function call with argument setup instructions for TLS optimization, which in turn allows GCC to better schedule the
sequence.

-mrecip
-mno-recip
This option enables use of the reciprocal estimate and reciprocal square root estimate instructions with additional Newton-Raphson
steps to increase precision instead of doing a divide or square root and divide for floating-point arguments. You should use the
-ffast-math option when using -mrecip (or at least -funsafe-math-optimizations, -ffinite-math-only, -freciprocal-math and
-fno-trapping-math). Note that while the throughput of the sequence is generally higher than the throughput of the non-reciprocal
instruction, the precision of the sequence can be decreased by up to 2 ulp (i.e. the inverse of 1.0 equals 0.99999994) for reciprocal
square roots.

-mrecip=opt
This option controls which reciprocal estimate instructions may be used. opt is a comma-separated list of options, which may be
preceded by a "!" to invert the option:

all Enable all estimate instructions.

default
Enable the default instructions, equivalent to -mrecip.

none
Disable all estimate instructions, equivalent to -mno-recip.

div Enable the reciprocal approximation instructions for both single and double precision.

divf
Enable the single-precision reciprocal approximation instructions.

divd
Enable the double-precision reciprocal approximation instructions.

rsqrt
Enable the reciprocal square root approximation instructions for both single and double precision.

rsqrtf
Enable the single-precision reciprocal square root approximation instructions.

rsqrtd
Enable the double-precision reciprocal square root approximation instructions.

So, for example, -mrecip=all,!rsqrtd enables all of the reciprocal estimate instructions, except for the "FRSQRTE", "XSRSQRTEDP", and
"XVRSQRTEDP" instructions which handle the double-precision reciprocal square root calculations.

-mrecip-precision
-mno-recip-precision
Assume (do not assume) that the reciprocal estimate instructions provide higher-precision estimates than is mandated by the PowerPC
ABI. Selecting -mcpu=power6, -mcpu=power7 or -mcpu=power8 automatically selects -mrecip-precision. The double-precision square root
estimate instructions are not generated by default on low-precision machines, since they do not provide an estimate that converges
after three steps.

-mveclibabi=type
Specifies the ABI type to use for vectorizing intrinsics using an external library. The only type supported at present is mass, which
specifies to use IBM's Mathematical Acceleration Subsystem (MASS) libraries for vectorizing intrinsics using external libraries. GCC
currently emits calls to "acosd2", "acosf4", "acoshd2", "acoshf4", "asind2", "asinf4", "asinhd2", "asinhf4", "atan2d2", "atan2f4",
"atand2", "atanf4", "atanhd2", "atanhf4", "cbrtd2", "cbrtf4", "cosd2", "cosf4", "coshd2", "coshf4", "erfcd2", "erfcf4", "erfd2",
"erff4", "exp2d2", "exp2f4", "expd2", "expf4", "expm1d2", "expm1f4", "hypotd2", "hypotf4", "lgammad2", "lgammaf4", "log10d2",
"log10f4", "log1pd2", "log1pf4", "log2d2", "log2f4", "logd2", "logf4", "powd2", "powf4", "sind2", "sinf4", "sinhd2", "sinhf4",
"sqrtd2", "sqrtf4", "tand2", "tanf4", "tanhd2", and "tanhf4" when generating code for power7. Both -ftree-vectorize and
-funsafe-math-optimizations must also be enabled. The MASS libraries must be specified at link time.

-mfriz
-mno-friz
Generate (do not generate) the "friz" instruction when the -funsafe-math-optimizations option is used to optimize rounding of floating-
point values to 64-bit integer and back to floating point. The "friz" instruction does not return the same value if the floating-point
number is too large to fit in an integer.

-mpointers-to-nested-functions
-mno-pointers-to-nested-functions
Generate (do not generate) code to load up the static chain register ("r11") when calling through a pointer on AIX and 64-bit Linux
systems where a function pointer points to a 3-word descriptor giving the function address, TOC value to be loaded in register "r2",
and static chain value to be loaded in register "r11". The -mpointers-to-nested-functions is on by default. You cannot call through
pointers to nested functions or pointers to functions compiled in other languages that use the static chain if you use
-mno-pointers-to-nested-functions.

-msave-toc-indirect
-mno-save-toc-indirect
Generate (do not generate) code to save the TOC value in the reserved stack location in the function prologue if the function calls
through a pointer on AIX and 64-bit Linux systems. If the TOC value is not saved in the prologue, it is saved just before the call
through the pointer. The -mno-save-toc-indirect option is the default.

-mcompat-align-parm
-mno-compat-align-parm
Generate (do not generate) code to pass structure parameters with a maximum alignment of 64 bits, for compatibility with older versions
of GCC.

Older versions of GCC (prior to 4.9.0) incorrectly did not align a structure parameter on a 128-bit boundary when that structure
contained a member requiring 128-bit alignment. This is corrected in more recent versions of GCC. This option may be used to generate
code that is compatible with functions compiled with older versions of GCC.

The -mno-compat-align-parm option is the default.

-mstack-protector-guard=guard
-mstack-protector-guard-reg=reg
-mstack-protector-guard-offset=offset
Generate stack protection code using canary at guard. Supported locations are global for global canary or tls for per-thread canary in
the TLS block (the default with GNU libc version 2.4 or later).

With the latter choice the options -mstack-protector-guard-reg=reg and -mstack-protector-guard-offset=offset furthermore specify which
register to use as base register for reading the canary, and from what offset from that base register. The default for those is as
specified in the relevant ABI.

RX Options

These command-line options are defined for RX targets:

-m64bit-doubles
-m32bit-doubles
Make the "double" data type be 64 bits (-m64bit-doubles) or 32 bits (-m32bit-doubles) in size. The default is -m32bit-doubles. Note
RX floating-point hardware only works on 32-bit values, which is why the default is -m32bit-doubles.

-fpu
-nofpu
Enables (-fpu) or disables (-nofpu) the use of RX floating-point hardware. The default is enabled for the RX600 series and disabled
for the RX200 series.

Floating-point instructions are only generated for 32-bit floating-point values, however, so the FPU hardware is not used for doubles
if the -m64bit-doubles option is used.

Note If the -fpu option is enabled then -funsafe-math-optimizations is also enabled automatically. This is because the RX FPU
instructions are themselves unsafe.

-mcpu=name
Selects the type of RX CPU to be targeted. Currently three types are supported, the generic RX600 and RX200 series hardware and the
specific RX610 CPU. The default is RX600.

The only difference between RX600 and RX610 is that the RX610 does not support the "MVTIPL" instruction.

The RX200 series does not have a hardware floating-point unit and so -nofpu is enabled by default when this type is selected.

-mbig-endian-data
-mlittle-endian-data
Store data (but not code) in the big-endian format. The default is -mlittle-endian-data, i.e. to store data in the little-endian
format.

-msmall-data-limit=N
Specifies the maximum size in bytes of global and static variables which can be placed into the small data area. Using the small data
area can lead to smaller and faster code, but the size of area is limited and it is up to the programmer to ensure that the area does
not overflow. Also when the small data area is used one of the RX's registers (usually "r13") is reserved for use pointing to this
area, so it is no longer available for use by the compiler. This could result in slower and/or larger code if variables are pushed
onto the stack instead of being held in this register.

Note, common variables (variables that have not been initialized) and constants are not placed into the small data area as they are
assigned to other sections in the output executable.

The default value is zero, which disables this feature. Note, this feature is not enabled by default with higher optimization levels
(-O2 etc) because of the potentially detrimental effects of reserving a register. It is up to the programmer to experiment and
discover whether this feature is of benefit to their program. See the description of the -mpid option for a description of how the
actual register to hold the small data area pointer is chosen.

-msim
-mno-sim
Use the simulator runtime. The default is to use the libgloss board-specific runtime.

-mas100-syntax
-mno-as100-syntax
When generating assembler output use a syntax that is compatible with Renesas's AS100 assembler. This syntax can also be handled by
the GAS assembler, but it has some restrictions so it is not generated by default.

-mmax-constant-size=N
Specifies the maximum size, in bytes, of a constant that can be used as an operand in a RX instruction. Although the RX instruction
set does allow constants of up to 4 bytes in length to be used in instructions, a longer value equates to a longer instruction. Thus
in some circumstances it can be beneficial to restrict the size of constants that are used in instructions. Constants that are too big
are instead placed into a constant pool and referenced via register indirection.

The value N can be between 0 and 4. A value of 0 (the default) or 4 means that constants of any size are allowed.

-mrelax
Enable linker relaxation. Linker relaxation is a process whereby the linker attempts to reduce the size of a program by finding
shorter versions of various instructions. Disabled by default.

-mint-register=N
Specify the number of registers to reserve for fast interrupt handler functions. The value N can be between 0 and 4. A value of 1
means that register "r13" is reserved for the exclusive use of fast interrupt handlers. A value of 2 reserves "r13" and "r12". A
value of 3 reserves "r13", "r12" and "r11", and a value of 4 reserves "r13" through "r10". A value of 0, the default, does not reserve
any registers.

-msave-acc-in-interrupts
Specifies that interrupt handler functions should preserve the accumulator register. This is only necessary if normal code might use
the accumulator register, for example because it performs 64-bit multiplications. The default is to ignore the accumulator as this
makes the interrupt handlers faster.

-mpid
-mno-pid
Enables the generation of position independent data. When enabled any access to constant data is done via an offset from a base
address held in a register. This allows the location of constant data to be determined at run time without requiring the executable to
be relocated, which is a benefit to embedded applications with tight memory constraints. Data that can be modified is not affected by
this option.

Note, using this feature reserves a register, usually "r13", for the constant data base address. This can result in slower and/or
larger code, especially in complicated functions.

The actual register chosen to hold the constant data base address depends upon whether the -msmall-data-limit and/or the -mint-register
command-line options are enabled. Starting with register "r13" and proceeding downwards, registers are allocated first to satisfy the
requirements of -mint-register, then -mpid and finally -msmall-data-limit. Thus it is possible for the small data area register to be
"r8" if both -mint-register=4 and -mpid are specified on the command line.

By default this feature is not enabled. The default can be restored via the -mno-pid command-line option.

-mno-warn-multiple-fast-interrupts
-mwarn-multiple-fast-interrupts
Prevents GCC from issuing a warning message if it finds more than one fast interrupt handler when it is compiling a file. The default
is to issue a warning for each extra fast interrupt handler found, as the RX only supports one such interrupt.

-mallow-string-insns
-mno-allow-string-insns
Enables or disables the use of the string manipulation instructions "SMOVF", "SCMPU", "SMOVB", "SMOVU", "SUNTIL" "SWHILE" and also the
"RMPA" instruction. These instructions may prefetch data, which is not safe to do if accessing an I/O register. (See section 12.2.7
of the RX62N Group User's Manual for more information).

The default is to allow these instructions, but it is not possible for GCC to reliably detect all circumstances where a string
instruction might be used to access an I/O register, so their use cannot be disabled automatically. Instead it is reliant upon the
programmer to use the -mno-allow-string-insns option if their program accesses I/O space.

When the instructions are enabled GCC defines the C preprocessor symbol "__RX_ALLOW_STRING_INSNS__", otherwise it defines the symbol
"__RX_DISALLOW_STRING_INSNS__".

-mjsr
-mno-jsr
Use only (or not only) "JSR" instructions to access functions. This option can be used when code size exceeds the range of "BSR"
instructions. Note that -mno-jsr does not mean to not use "JSR" but instead means that any type of branch may be used.

Note: The generic GCC command-line option -ffixed-reg has special significance to the RX port when used with the "interrupt" function
attribute. This attribute indicates a function intended to process fast interrupts. GCC ensures that it only uses the registers "r10",
"r11", "r12" and/or "r13" and only provided that the normal use of the corresponding registers have been restricted via the -ffixed-reg or
-mint-register command-line options.

S/390 and zSeries Options

These are the -m options defined for the S/390 and zSeries architecture.

-mhard-float
-msoft-float
Use (do not use) the hardware floating-point instructions and registers for floating-point operations. When -msoft-float is specified,
functions in libgcc.a are used to perform floating-point operations. When -mhard-float is specified, the compiler generates IEEE
floating-point instructions. This is the default.

-mhard-dfp
-mno-hard-dfp
Use (do not use) the hardware decimal-floating-point instructions for decimal-floating-point operations. When -mno-hard-dfp is
specified, functions in libgcc.a are used to perform decimal-floating-point operations. When -mhard-dfp is specified, the compiler
generates decimal-floating-point hardware instructions. This is the default for -march=z9-ec or higher.

-mlong-double-64
-mlong-double-128
These switches control the size of "long double" type. A size of 64 bits makes the "long double" type equivalent to the "double" type.
This is the default.

-mbackchain
-mno-backchain
Store (do not store) the address of the caller's frame as backchain pointer into the callee's stack frame. A backchain may be needed
to allow debugging using tools that do not understand DWARF call frame information. When -mno-packed-stack is in effect, the backchain
pointer is stored at the bottom of the stack frame; when -mpacked-stack is in effect, the backchain is placed into the topmost word of
the 96/160 byte register save area.

In general, code compiled with -mbackchain is call-compatible with code compiled with -mmo-backchain; however, use of the backchain for
debugging purposes usually requires that the whole binary is built with -mbackchain. Note that the combination of -mbackchain,
-mpacked-stack and -mhard-float is not supported. In order to build a linux kernel use -msoft-float.

The default is to not maintain the backchain.

-mpacked-stack
-mno-packed-stack
Use (do not use) the packed stack layout. When -mno-packed-stack is specified, the compiler uses the all fields of the 96/160 byte
register save area only for their default purpose; unused fields still take up stack space. When -mpacked-stack is specified, register
save slots are densely packed at the top of the register save area; unused space is reused for other purposes, allowing for more
efficient use of the available stack space. However, when -mbackchain is also in effect, the topmost word of the save area is always
used to store the backchain, and the return address register is always saved two words below the backchain.

As long as the stack frame backchain is not used, code generated with -mpacked-stack is call-compatible with code generated with
-mno-packed-stack. Note that some non-FSF releases of GCC 2.95 for S/390 or zSeries generated code that uses the stack frame backchain
at run time, not just for debugging purposes. Such code is not call-compatible with code compiled with -mpacked-stack. Also, note
that the combination of -mbackchain, -mpacked-stack and -mhard-float is not supported. In order to build a linux kernel use
-msoft-float.

The default is to not use the packed stack layout.

-msmall-exec
-mno-small-exec
Generate (or do not generate) code using the "bras" instruction to do subroutine calls. This only works reliably if the total
executable size does not exceed 64k. The default is to use the "basr" instruction instead, which does not have this limitation.

-m64
-m31
When -m31 is specified, generate code compliant to the GNU/Linux for S/390 ABI. When -m64 is specified, generate code compliant to the
GNU/Linux for zSeries ABI. This allows GCC in particular to generate 64-bit instructions. For the s390 targets, the default is -m31,
while the s390x targets default to -m64.

-mzarch
-mesa
When -mzarch is specified, generate code using the instructions available on z/Architecture. When -mesa is specified, generate code
using the instructions available on ESA/390. Note that -mesa is not possible with -m64. When generating code compliant to the
GNU/Linux for S/390 ABI, the default is -mesa. When generating code compliant to the GNU/Linux for zSeries ABI, the default is
-mzarch.

-mhtm
-mno-htm
The -mhtm option enables a set of builtins making use of instructions available with the transactional execution facility introduced
with the IBM zEnterprise EC12 machine generation S/390 System z Built-in Functions. -mhtm is enabled by default when using
-march=zEC12.

-mvx
-mno-vx
When -mvx is specified, generate code using the instructions available with the vector extension facility introduced with the IBM z13
machine generation. This option changes the ABI for some vector type values with regard to alignment and calling conventions. In case
vector type values are being used in an ABI-relevant context a GAS .gnu_attribute command will be added to mark the resulting binary
with the ABI used. -mvx is enabled by default when using -march=z13.

-mzvector
-mno-zvector
The -mzvector option enables vector language extensions and builtins using instructions available with the vector extension facility
introduced with the IBM z13 machine generation. This option adds support for vector to be used as a keyword to define vector type
variables and arguments. vector is only available when GNU extensions are enabled. It will not be expanded when requesting strict
standard compliance e.g. with -std=c99. In addition to the GCC low-level builtins -mzvector enables a set of builtins added for
compatibility with AltiVec-style implementations like Power and Cell. In order to make use of these builtins the header file
vecintrin.h needs to be included. -mzvector is disabled by default.

-mmvcle
-mno-mvcle
Generate (or do not generate) code using the "mvcle" instruction to perform block moves. When -mno-mvcle is specified, use a "mvc"
loop instead. This is the default unless optimizing for size.

-mdebug
-mno-debug
Print (or do not print) additional debug information when compiling. The default is to not print debug information.

-march=cpu-type
Generate code that runs on cpu-type, which is the name of a system representing a certain processor type. Possible values for cpu-type
are z900/arch5, z990/arch6, z9-109, z9-ec/arch7, z10/arch8, z196/arch9, zEC12, z13/arch11, and native.

The default is -march=z900. g5/arch3 and g6 are deprecated and will be removed with future releases.

Specifying native as cpu type can be used to select the best architecture option for the host processor. -march=native has no effect
if GCC does not recognize the processor.

-mtune=cpu-type
Tune to cpu-type everything applicable about the generated code, except for the ABI and the set of available instructions. The list of
cpu-type values is the same as for -march. The default is the value used for -march.

-mtpf-trace
-mno-tpf-trace
Generate code that adds (does not add) in TPF OS specific branches to trace routines in the operating system. This option is off by
default, even when compiling for the TPF OS.

-mwarn-framesize=framesize
Emit a warning if the current function exceeds the given frame size. Because this is a compile-time check it doesn't need to be a real
problem when the program runs. It is intended to identify functions that most probably cause a stack overflow. It is useful to be
used in an environment with limited stack size e.g. the linux kernel.

-mwarn-dynamicstack
Emit a warning if the function calls "alloca" or uses dynamically-sized arrays. This is generally a bad idea with a limited stack
size.

-mstack-guard=stack-guard
-mstack-size=stack-size
If these options are provided the S/390 back end emits additional instructions in the function prologue that trigger a trap if the
stack size is stack-guard bytes above the stack-size (remember that the stack on S/390 grows downward). If the stack-guard option is
omitted the smallest power of 2 larger than the frame size of the compiled function is chosen. These options are intended to be used
to help debugging stack overflow problems. The additionally emitted code causes only little overhead and hence can also be used in
production-like systems without greater performance degradation. The given values have to be exact powers of 2 and stack-size has to
be greater than stack-guard without exceeding 64k. In order to be efficient the extra code makes the assumption that the stack starts
at an address aligned to the value given by stack-size. The stack-guard option can only be used in conjunction with stack-size.

-mhotpatch=pre-halfwords,post-halfwords
If the hotpatch option is enabled, a "hot-patching" function prologue is generated for all functions in the compilation unit. The
funtion label is prepended with the given number of two-byte NOP instructions (pre-halfwords, maximum 1000000). After the label, 2 *
post-halfwords bytes are appended, using the largest NOP like instructions the architecture allows (maximum 1000000).

If both arguments are zero, hotpatching is disabled.

This option can be overridden for individual functions with the "hotpatch" attribute.

Score Options

These options are defined for Score implementations:

-meb
Compile code for big-endian mode. This is the default.

-mel
Compile code for little-endian mode.

-mnhwloop
Disable generation of "bcnz" instructions.

-muls
Enable generation of unaligned load and store instructions.

-mmac
Enable the use of multiply-accumulate instructions. Disabled by default.

-mscore5
Specify the SCORE5 as the target architecture.

-mscore5u
Specify the SCORE5U of the target architecture.

-mscore7
Specify the SCORE7 as the target architecture. This is the default.

-mscore7d
Specify the SCORE7D as the target architecture.

SH Options

These -m options are defined for the SH implementations:

-m1 Generate code for the SH1.

-m2 Generate code for the SH2.

-m2e
Generate code for the SH2e.

-m2a-nofpu
Generate code for the SH2a without FPU, or for a SH2a-FPU in such a way that the floating-point unit is not used.

-m2a-single-only
Generate code for the SH2a-FPU, in such a way that no double-precision floating-point operations are used.

-m2a-single
Generate code for the SH2a-FPU assuming the floating-point unit is in single-precision mode by default.

-m2a
Generate code for the SH2a-FPU assuming the floating-point unit is in double-precision mode by default.

-m3 Generate code for the SH3.

-m3e
Generate code for the SH3e.

-m4-nofpu
Generate code for the SH4 without a floating-point unit.

-m4-single-only
Generate code for the SH4 with a floating-point unit that only supports single-precision arithmetic.

-m4-single
Generate code for the SH4 assuming the floating-point unit is in single-precision mode by default.

-m4 Generate code for the SH4.

-m4-100
Generate code for SH4-100.

-m4-100-nofpu
Generate code for SH4-100 in such a way that the floating-point unit is not used.

-m4-100-single
Generate code for SH4-100 assuming the floating-point unit is in single-precision mode by default.

-m4-100-single-only
Generate code for SH4-100 in such a way that no double-precision floating-point operations are used.

-m4-200
Generate code for SH4-200.

-m4-200-nofpu
Generate code for SH4-200 without in such a way that the floating-point unit is not used.

-m4-200-single
Generate code for SH4-200 assuming the floating-point unit is in single-precision mode by default.

-m4-200-single-only
Generate code for SH4-200 in such a way that no double-precision floating-point operations are used.

-m4-300
Generate code for SH4-300.

-m4-300-nofpu
Generate code for SH4-300 without in such a way that the floating-point unit is not used.

-m4-300-single
Generate code for SH4-300 in such a way that no double-precision floating-point operations are used.

-m4-300-single-only
Generate code for SH4-300 in such a way that no double-precision floating-point operations are used.

-m4-340
Generate code for SH4-340 (no MMU, no FPU).

-m4-500
Generate code for SH4-500 (no FPU). Passes -isa=sh4-nofpu to the assembler.

-m4a-nofpu
Generate code for the SH4al-dsp, or for a SH4a in such a way that the floating-point unit is not used.

-m4a-single-only
Generate code for the SH4a, in such a way that no double-precision floating-point operations are used.

-m4a-single
Generate code for the SH4a assuming the floating-point unit is in single-precision mode by default.

-m4a
Generate code for the SH4a.

-m4al
Same as -m4a-nofpu, except that it implicitly passes -dsp to the assembler. GCC doesn't generate any DSP instructions at the moment.

-mb Compile code for the processor in big-endian mode.

-ml Compile code for the processor in little-endian mode.

-mdalign
Align doubles at 64-bit boundaries. Note that this changes the calling conventions, and thus some functions from the standard C
library do not work unless you recompile it first with -mdalign.

-mrelax
Shorten some address references at link time, when possible; uses the linker option -relax.

-mbigtable
Use 32-bit offsets in "switch" tables. The default is to use 16-bit offsets.

-mbitops
Enable the use of bit manipulation instructions on SH2A.

-mfmovd
Enable the use of the instruction "fmovd". Check -mdalign for alignment constraints.

-mrenesas
Comply with the calling conventions defined by Renesas.

-mno-renesas
Comply with the calling conventions defined for GCC before the Renesas conventions were available. This option is the default for all
targets of the SH toolchain.

-mnomacsave
Mark the "MAC" register as call-clobbered, even if -mrenesas is given.

-mieee
-mno-ieee
Control the IEEE compliance of floating-point comparisons, which affects the handling of cases where the result of a comparison is
unordered. By default -mieee is implicitly enabled. If -ffinite-math-only is enabled -mno-ieee is implicitly set, which results in
faster floating-point greater-equal and less-equal comparisons. The implicit settings can be overridden by specifying either -mieee or
-mno-ieee.

-minline-ic_invalidate
Inline code to invalidate instruction cache entries after setting up nested function trampolines. This option has no effect if
-musermode is in effect and the selected code generation option (e.g. -m4) does not allow the use of the "icbi" instruction. If the
selected code generation option does not allow the use of the "icbi" instruction, and -musermode is not in effect, the inlined code
manipulates the instruction cache address array directly with an associative write. This not only requires privileged mode at run
time, but it also fails if the cache line had been mapped via the TLB and has become unmapped.

-misize
Dump instruction size and location in the assembly code.

-mpadstruct
This option is deprecated. It pads structures to multiple of 4 bytes, which is incompatible with the SH ABI.

-matomic-model=model
Sets the model of atomic operations and additional parameters as a comma separated list. For details on the atomic built-in functions
see __atomic Builtins. The following models and parameters are supported:

none
Disable compiler generated atomic sequences and emit library calls for atomic operations. This is the default if the target is not
"sh*-*-linux*".

soft-gusa
Generate GNU/Linux compatible gUSA software atomic sequences for the atomic built-in functions. The generated atomic sequences
require additional support from the interrupt/exception handling code of the system and are only suitable for SH3* and SH4* single-
core systems. This option is enabled by default when the target is "sh*-*-linux*" and SH3* or SH4*. When the target is SH4A, this
option also partially utilizes the hardware atomic instructions "movli.l" and "movco.l" to create more efficient code, unless
strict is specified.

soft-tcb
Generate software atomic sequences that use a variable in the thread control block. This is a variation of the gUSA sequences
which can also be used on SH1* and SH2* targets. The generated atomic sequences require additional support from the
interrupt/exception handling code of the system and are only suitable for single-core systems. When using this model, the
gbr-offset= parameter has to be specified as well.

soft-imask
Generate software atomic sequences that temporarily disable interrupts by setting "SR.IMASK = 1111". This model works only when
the program runs in privileged mode and is only suitable for single-core systems. Additional support from the interrupt/exception
handling code of the system is not required. This model is enabled by default when the target is "sh*-*-linux*" and SH1* or SH2*.

hard-llcs
Generate hardware atomic sequences using the "movli.l" and "movco.l" instructions only. This is only available on SH4A and is
suitable for multi-core systems. Since the hardware instructions support only 32 bit atomic variables access to 8 or 16 bit
variables is emulated with 32 bit accesses. Code compiled with this option is also compatible with other software atomic model
interrupt/exception handling systems if executed on an SH4A system. Additional support from the interrupt/exception handling code
of the system is not required for this model.

gbr-offset=
This parameter specifies the offset in bytes of the variable in the thread control block structure that should be used by the
generated atomic sequences when the soft-tcb model has been selected. For other models this parameter is ignored. The specified
value must be an integer multiple of four and in the range 0-1020.

strict
This parameter prevents mixed usage of multiple atomic models, even if they are compatible, and makes the compiler generate atomic
sequences of the specified model only.

-mtas
Generate the "tas.b" opcode for "__atomic_test_and_set". Notice that depending on the particular hardware and software configuration
this can degrade overall performance due to the operand cache line flushes that are implied by the "tas.b" instruction. On multi-core
SH4A processors the "tas.b" instruction must be used with caution since it can result in data corruption for certain cache
configurations.

-mprefergot
When generating position-independent code, emit function calls using the Global Offset Table instead of the Procedure Linkage Table.

-musermode
-mno-usermode
Don't allow (allow) the compiler generating privileged mode code. Specifying -musermode also implies -mno-inline-ic_invalidate if the
inlined code would not work in user mode. -musermode is the default when the target is "sh*-*-linux*". If the target is SH1* or SH2*
-musermode has no effect, since there is no user mode.

-multcost=number
Set the cost to assume for a multiply insn.

-mdiv=strategy
Set the division strategy to be used for integer division operations. strategy can be one of:

call-div1
Calls a library function that uses the single-step division instruction "div1" to perform the operation. Division by zero
calculates an unspecified result and does not trap. This is the default except for SH4, SH2A and SHcompact.

call-fp
Calls a library function that performs the operation in double precision floating point. Division by zero causes a floating-point
exception. This is the default for SHcompact with FPU. Specifying this for targets that do not have a double precision FPU
defaults to "call-div1".

call-table
Calls a library function that uses a lookup table for small divisors and the "div1" instruction with case distinction for larger
divisors. Division by zero calculates an unspecified result and does not trap. This is the default for SH4. Specifying this for
targets that do not have dynamic shift instructions defaults to "call-div1".

When a division strategy has not been specified the default strategy is selected based on the current target. For SH2A the default
strategy is to use the "divs" and "divu" instructions instead of library function calls.

-maccumulate-outgoing-args
Reserve space once for outgoing arguments in the function prologue rather than around each call. Generally beneficial for performance
and size. Also needed for unwinding to avoid changing the stack frame around conditional code.

-mdivsi3_libfunc=name
Set the name of the library function used for 32-bit signed division to name. This only affects the name used in the call division
strategies, and the compiler still expects the same sets of input/output/clobbered registers as if this option were not present.

-mfixed-range=register-range
Generate code treating the given register range as fixed registers. A fixed register is one that the register allocator can not use.
This is useful when compiling kernel code. A register range is specified as two registers separated by a dash. Multiple register
ranges can be specified separated by a comma.

-mbranch-cost=num
Assume num to be the cost for a branch instruction. Higher numbers make the compiler try to generate more branch-free code if
possible. If not specified the value is selected depending on the processor type that is being compiled for.

-mzdcbranch
-mno-zdcbranch
Assume (do not assume) that zero displacement conditional branch instructions "bt" and "bf" are fast. If -mzdcbranch is specified, the
compiler prefers zero displacement branch code sequences. This is enabled by default when generating code for SH4 and SH4A. It can be
explicitly disabled by specifying -mno-zdcbranch.

-mcbranch-force-delay-slot
Force the usage of delay slots for conditional branches, which stuffs the delay slot with a "nop" if a suitable instruction cannot be
found. By default this option is disabled. It can be enabled to work around hardware bugs as found in the original SH7055.

-mfsca
-mno-fsca
Allow or disallow the compiler to emit the "fsca" instruction for sine and cosine approximations. The option -mfsca must be used in
combination with -funsafe-math-optimizations. It is enabled by default when generating code for SH4A. Using -mno-fsca disables sine
and cosine approximations even if -funsafe-math-optimizations is in effect.

-mfsrra
-mno-fsrra
Allow or disallow the compiler to emit the "fsrra" instruction for reciprocal square root approximations. The option -mfsrra must be
used in combination with -funsafe-math-optimizations and -ffinite-math-only. It is enabled by default when generating code for SH4A.
Using -mno-fsrra disables reciprocal square root approximations even if -funsafe-math-optimizations and -ffinite-math-only are in
effect.

-mpretend-cmove
Prefer zero-displacement conditional branches for conditional move instruction patterns. This can result in faster code on the SH4
processor.

-mfdpic
Generate code using the FDPIC ABI.

Solaris 2 Options

These -m options are supported on Solaris 2:

-mclear-hwcap
-mclear-hwcap tells the compiler to remove the hardware capabilities generated by the Solaris assembler. This is only necessary when
object files use ISA extensions not supported by the current machine, but check at runtime whether or not to use them.

-mimpure-text
-mimpure-text, used in addition to -shared, tells the compiler to not pass -z text to the linker when linking a shared object. Using
this option, you can link position-dependent code into a shared object.

-mimpure-text suppresses the "relocations remain against allocatable but non-writable sections" linker error message. However, the
necessary relocations trigger copy-on-write, and the shared object is not actually shared across processes. Instead of using
-mimpure-text, you should compile all source code with -fpic or -fPIC.

These switches are supported in addition to the above on Solaris 2:

-pthreads
This is a synonym for -pthread.

SPARC Options

These -m options are supported on the SPARC:

-mno-app-regs
-mapp-regs
Specify -mapp-regs to generate output using the global registers 2 through 4, which the SPARC SVR4 ABI reserves for applications. Like
the global register 1, each global register 2 through 4 is then treated as an allocable register that is clobbered by function calls.
This is the default.

To be fully SVR4 ABI-compliant at the cost of some performance loss, specify -mno-app-regs. You should compile libraries and system
software with this option.

-mflat
-mno-flat
With -mflat, the compiler does not generate save/restore instructions and uses a "flat" or single register window model. This model is
compatible with the regular register window model. The local registers and the input registers (0--5) are still treated as "call-
saved" registers and are saved on the stack as needed.

With -mno-flat (the default), the compiler generates save/restore instructions (except for leaf functions). This is the normal
operating mode.

-mfpu
-mhard-float
Generate output containing floating-point instructions. This is the default.

-mno-fpu
-msoft-float
Generate output containing library calls for floating point. Warning: the requisite libraries are not available for all SPARC targets.
Normally the facilities of the machine's usual C compiler are used, but this cannot be done directly in cross-compilation. You must
make your own arrangements to provide suitable library functions for cross-compilation. The embedded targets sparc-*-aout and
sparclite-*-* do provide software floating-point support.

-mhard-quad-float
Generate output containing quad-word (long double) floating-point instructions.

-msoft-quad-float
Generate output containing library calls for quad-word (long double) floating-point instructions. The functions called are those
specified in the SPARC ABI. This is the default.

As of this writing, there are no SPARC implementations that have hardware support for the quad-word floating-point instructions. They
all invoke a trap handler for one of these instructions, and then the trap handler emulates the effect of the instruction. Because of
the trap handler overhead, this is much slower than calling the ABI library routines. Thus the -msoft-quad-float option is the
default.

-mno-unaligned-doubles
-munaligned-doubles
Assume that doubles have 8-byte alignment. This is the default.

With -munaligned-doubles, GCC assumes that doubles have 8-byte alignment only if they are contained in another type, or if they have an
absolute address. Otherwise, it assumes they have 4-byte alignment. Specifying this option avoids some rare compatibility problems
with code generated by other compilers. It is not the default because it results in a performance loss, especially for floating-point
code.

-muser-mode
-mno-user-mode
Do not generate code that can only run in supervisor mode. This is relevant only for the "casa" instruction emitted for the LEON3
processor. This is the default.

-mfaster-structs
-mno-faster-structs
With -mfaster-structs, the compiler assumes that structures should have 8-byte alignment. This enables the use of pairs of "ldd" and
"std" instructions for copies in structure assignment, in place of twice as many "ld" and "st" pairs. However, the use of this changed
alignment directly violates the SPARC ABI. Thus, it's intended only for use on targets where the developer acknowledges that their
resulting code is not directly in line with the rules of the ABI.

-mstd-struct-return
-mno-std-struct-return
With -mstd-struct-return, the compiler generates checking code in functions returning structures or unions to detect size mismatches
between the two sides of function calls, as per the 32-bit ABI.

The default is -mno-std-struct-return. This option has no effect in 64-bit mode.

-mlra
-mno-lra
Enable Local Register Allocation. This is the default for SPARC since GCC 7 so -mno-lra needs to be passed to get old Reload.

-mcpu=cpu_type
Set the instruction set, register set, and instruction scheduling parameters for machine type cpu_type. Supported values for cpu_type
are v7, cypress, v8, supersparc, hypersparc, leon, leon3, leon3v7, sparclite, f930, f934, sparclite86x, sparclet, tsc701, v9,
ultrasparc, ultrasparc3, niagara, niagara2, niagara3, niagara4, niagara7 and m8.

Native Solaris and GNU/Linux toolchains also support the value native, which selects the best architecture option for the host
processor. -mcpu=native has no effect if GCC does not recognize the processor.

Default instruction scheduling parameters are used for values that select an architecture and not an implementation. These are v7, v8,
sparclite, sparclet, v9.

Here is a list of each supported architecture and their supported implementations.

v7 cypress, leon3v7

v8 supersparc, hypersparc, leon, leon3

sparclite
f930, f934, sparclite86x

sparclet
tsc701

v9 ultrasparc, ultrasparc3, niagara, niagara2, niagara3, niagara4, niagara7, m8

By default (unless configured otherwise), GCC generates code for the V7 variant of the SPARC architecture. With -mcpu=cypress, the
compiler additionally optimizes it for the Cypress CY7C602 chip, as used in the SPARCStation/SPARCServer 3xx series. This is also
appropriate for the older SPARCStation 1, 2, IPX etc.

With -mcpu=v8, GCC generates code for the V8 variant of the SPARC architecture. The only difference from V7 code is that the compiler
emits the integer multiply and integer divide instructions which exist in SPARC-V8 but not in SPARC-V7. With -mcpu=supersparc, the
compiler additionally optimizes it for the SuperSPARC chip, as used in the SPARCStation 10, 1000 and 2000 series.

With -mcpu=sparclite, GCC generates code for the SPARClite variant of the SPARC architecture. This adds the integer multiply, integer
divide step and scan ("ffs") instructions which exist in SPARClite but not in SPARC-V7. With -mcpu=f930, the compiler additionally
optimizes it for the Fujitsu MB86930 chip, which is the original SPARClite, with no FPU. With -mcpu=f934, the compiler additionally
optimizes it for the Fujitsu MB86934 chip, which is the more recent SPARClite with FPU.

With -mcpu=sparclet, GCC generates code for the SPARClet variant of the SPARC architecture. This adds the integer multiply,
multiply/accumulate, integer divide step and scan ("ffs") instructions which exist in SPARClet but not in SPARC-V7. With -mcpu=tsc701,
the compiler additionally optimizes it for the TEMIC SPARClet chip.

With -mcpu=v9, GCC generates code for the V9 variant of the SPARC architecture. This adds 64-bit integer and floating-point move
instructions, 3 additional floating-point condition code registers and conditional move instructions. With -mcpu=ultrasparc, the
compiler additionally optimizes it for the Sun UltraSPARC I/II/IIi chips. With -mcpu=ultrasparc3, the compiler additionally optimizes
it for the Sun UltraSPARC III/III+/IIIi/IIIi+/IV/IV+ chips. With -mcpu=niagara, the compiler additionally optimizes it for Sun
UltraSPARC T1 chips. With -mcpu=niagara2, the compiler additionally optimizes it for Sun UltraSPARC T2 chips. With -mcpu=niagara3, the
compiler additionally optimizes it for Sun UltraSPARC T3 chips. With -mcpu=niagara4, the compiler additionally optimizes it for Sun
UltraSPARC T4 chips. With -mcpu=niagara7, the compiler additionally optimizes it for Oracle SPARC M7 chips. With -mcpu=m8, the
compiler additionally optimizes it for Oracle M8 chips.

-mtune=cpu_type
Set the instruction scheduling parameters for machine type cpu_type, but do not set the instruction set or register set that the option
-mcpu=cpu_type does.

The same values for -mcpu=cpu_type can be used for -mtune=cpu_type, but the only useful values are those that select a particular CPU
implementation. Those are cypress, supersparc, hypersparc, leon, leon3, leon3v7, f930, f934, sparclite86x, tsc701, ultrasparc,
ultrasparc3, niagara, niagara2, niagara3, niagara4, niagara7 and m8. With native Solaris and GNU/Linux toolchains, native can also be
used.

-mv8plus
-mno-v8plus
With -mv8plus, GCC generates code for the SPARC-V8+ ABI. The difference from the V8 ABI is that the global and out registers are
considered 64 bits wide. This is enabled by default on Solaris in 32-bit mode for all SPARC-V9 processors.

-mvis
-mno-vis
With -mvis, GCC generates code that takes advantage of the UltraSPARC Visual Instruction Set extensions. The default is -mno-vis.

-mvis2
-mno-vis2
With -mvis2, GCC generates code that takes advantage of version 2.0 of the UltraSPARC Visual Instruction Set extensions. The default
is -mvis2 when targeting a cpu that supports such instructions, such as UltraSPARC-III and later. Setting -mvis2 also sets -mvis.

-mvis3
-mno-vis3
With -mvis3, GCC generates code that takes advantage of version 3.0 of the UltraSPARC Visual Instruction Set extensions. The default
is -mvis3 when targeting a cpu that supports such instructions, such as niagara-3 and later. Setting -mvis3 also sets -mvis2 and
-mvis.

-mvis4
-mno-vis4
With -mvis4, GCC generates code that takes advantage of version 4.0 of the UltraSPARC Visual Instruction Set extensions. The default
is -mvis4 when targeting a cpu that supports such instructions, such as niagara-7 and later. Setting -mvis4 also sets -mvis3, -mvis2
and -mvis.

-mvis4b
-mno-vis4b
With -mvis4b, GCC generates code that takes advantage of version 4.0 of the UltraSPARC Visual Instruction Set extensions, plus the
additional VIS instructions introduced in the Oracle SPARC Architecture 2017. The default is -mvis4b when targeting a cpu that
supports such instructions, such as m8 and later. Setting -mvis4b also sets -mvis4, -mvis3, -mvis2 and -mvis.

-mcbcond
-mno-cbcond
With -mcbcond, GCC generates code that takes advantage of the UltraSPARC Compare-and-Branch-on-Condition instructions. The default is
-mcbcond when targeting a CPU that supports such instructions, such as Niagara-4 and later.

-mfmaf
-mno-fmaf
With -mfmaf, GCC generates code that takes advantage of the UltraSPARC Fused Multiply-Add Floating-point instructions. The default is
-mfmaf when targeting a CPU that supports such instructions, such as Niagara-3 and later.

-mfsmuld
-mno-fsmuld
With -mfsmuld, GCC generates code that takes advantage of the Floating-point Multiply Single to Double (FsMULd) instruction. The
default is -mfsmuld when targeting a CPU supporting the architecture versions V8 or V9 with FPU except -mcpu=leon.

-mpopc
-mno-popc
With -mpopc, GCC generates code that takes advantage of the UltraSPARC Population Count instruction. The default is -mpopc when
targeting a CPU that supports such an instruction, such as Niagara-2 and later.

-msubxc
-mno-subxc
With -msubxc, GCC generates code that takes advantage of the UltraSPARC Subtract-Extended-with-Carry instruction. The default is
-msubxc when targeting a CPU that supports such an instruction, such as Niagara-7 and later.

-mfix-at697f
Enable the documented workaround for the single erratum of the Atmel AT697F processor (which corresponds to erratum #13 of the AT697E
processor).

-mfix-ut699
Enable the documented workarounds for the floating-point errata and the data cache nullify errata of the UT699 processor.

-mfix-ut700
Enable the documented workaround for the back-to-back store errata of the UT699E/UT700 processor.

-mfix-gr712rc
Enable the documented workaround for the back-to-back store errata of the GR712RC processor.

These -m options are supported in addition to the above on SPARC-V9 processors in 64-bit environments:

-m32
-m64
Generate code for a 32-bit or 64-bit environment. The 32-bit environment sets int, long and pointer to 32 bits. The 64-bit
environment sets int to 32 bits and long and pointer to 64 bits.

-mcmodel=which
Set the code model to one of

medlow
The Medium/Low code model: 64-bit addresses, programs must be linked in the low 32 bits of memory. Programs can be statically or
dynamically linked.

medmid
The Medium/Middle code model: 64-bit addresses, programs must be linked in the low 44 bits of memory, the text and data segments
must be less than 2GB in size and the data segment must be located within 2GB of the text segment.

medany
The Medium/Anywhere code model: 64-bit addresses, programs may be linked anywhere in memory, the text and data segments must be
less than 2GB in size and the data segment must be located within 2GB of the text segment.

embmedany
The Medium/Anywhere code model for embedded systems: 64-bit addresses, the text and data segments must be less than 2GB in size,
both starting anywhere in memory (determined at link time). The global register %g4 points to the base of the data segment.
Programs are statically linked and PIC is not supported.

-mmemory-model=mem-model
Set the memory model in force on the processor to one of

default
The default memory model for the processor and operating system.

rmo Relaxed Memory Order

pso Partial Store Order

tso Total Store Order

sc Sequential Consistency

These memory models are formally defined in Appendix D of the SPARC-V9 architecture manual, as set in the processor's "PSTATE.MM"
field.

-mstack-bias
-mno-stack-bias
With -mstack-bias, GCC assumes that the stack pointer, and frame pointer if present, are offset by -2047 which must be added back when
making stack frame references. This is the default in 64-bit mode. Otherwise, assume no such offset is present.

SPU Options

These -m options are supported on the SPU:

-mwarn-reloc
-merror-reloc
The loader for SPU does not handle dynamic relocations. By default, GCC gives an error when it generates code that requires a dynamic
relocation. -mno-error-reloc disables the error, -mwarn-reloc generates a warning instead.

-msafe-dma
-munsafe-dma
Instructions that initiate or test completion of DMA must not be reordered with respect to loads and stores of the memory that is being
accessed. With -munsafe-dma you must use the "volatile" keyword to protect memory accesses, but that can lead to inefficient code in
places where the memory is known to not change. Rather than mark the memory as volatile, you can use -msafe-dma to tell the compiler
to treat the DMA instructions as potentially affecting all memory.

-mbranch-hints
By default, GCC generates a branch hint instruction to avoid pipeline stalls for always-taken or probably-taken branches. A hint is
not generated closer than 8 instructions away from its branch. There is little reason to disable them, except for debugging purposes,
or to make an object a little bit smaller.

-msmall-mem
-mlarge-mem
By default, GCC generates code assuming that addresses are never larger than 18 bits. With -mlarge-mem code is generated that assumes
a full 32-bit address.

-mstdmain
By default, GCC links against startup code that assumes the SPU-style main function interface (which has an unconventional parameter
list). With -mstdmain, GCC links your program against startup code that assumes a C99-style interface to "main", including a local
copy of "argv" strings.

-mea32
-mea64
Compile code assuming that pointers to the PPU address space accessed via the "__ea" named address space qualifier are either 32 or 64
bits wide. The default is 32 bits. As this is an ABI-changing option, all object code in an executable must be compiled with the same
setting.

-maddress-space-conversion
-mno-address-space-conversion
Allow/disallow treating the "__ea" address space as superset of the generic address space. This enables explicit type casts between
"__ea" and generic pointer as well as implicit conversions of generic pointers to "__ea" pointers. The default is to allow address
space pointer conversions.

-mcache-size=cache-size
This option controls the version of libgcc that the compiler links to an executable and selects a software-managed cache for accessing
variables in the "__ea" address space with a particular cache size. Possible options for cache-size are 8, 16, 32, 64 and 128. The
default cache size is 64KB.

-matomic-updates
-mno-atomic-updates
This option controls the version of libgcc that the compiler links to an executable and selects whether atomic updates to the software-
managed cache of PPU-side variables are used. If you use atomic updates, changes to a PPU variable from SPU code using the "__ea"
named address space qualifier do not interfere with changes to other PPU variables residing in the same cache line from PPU code. If
you do not use atomic updates, such interference may occur; however, writing back cache lines is more efficient. The default behavior
is to use atomic updates.

-mdual-nops
-mdual-nops=n
By default, GCC inserts NOPs to increase dual issue when it expects it to increase performance. n can be a value from 0 to 10. A
smaller n inserts fewer NOPs. 10 is the default, 0 is the same as -mno-dual-nops. Disabled with -Os.

-mhint-max-nops=n
Maximum number of NOPs to insert for a branch hint. A branch hint must be at least 8 instructions away from the branch it is
affecting. GCC inserts up to n NOPs to enforce this, otherwise it does not generate the branch hint.

-mhint-max-distance=n
The encoding of the branch hint instruction limits the hint to be within 256 instructions of the branch it is affecting. By default,
GCC makes sure it is within 125.

-msafe-hints
Work around a hardware bug that causes the SPU to stall indefinitely. By default, GCC inserts the "hbrp" instruction to make sure this
stall won't happen.

Options for System V

These additional options are available on System V Release 4 for compatibility with other compilers on those systems:

-G Create a shared object. It is recommended that -symbolic or -shared be used instead.

-Qy Identify the versions of each tool used by the compiler, in a ".ident" assembler directive in the output.

-Qn Refrain from adding ".ident" directives to the output file (this is the default).

-YP,dirs
Search the directories dirs, and no others, for libraries specified with -l.

-Ym,dir
Look in the directory dir to find the M4 preprocessor. The assembler uses this option.

TILE-Gx Options

These -m options are supported on the TILE-Gx:

-mcmodel=small
Generate code for the small model. The distance for direct calls is limited to 500M in either direction. PC-relative addresses are 32
bits. Absolute addresses support the full address range.

-mcmodel=large
Generate code for the large model. There is no limitation on call distance, pc-relative addresses, or absolute addresses.

-mcpu=name
Selects the type of CPU to be targeted. Currently the only supported type is tilegx.

-m32
-m64
Generate code for a 32-bit or 64-bit environment. The 32-bit environment sets int, long, and pointer to 32 bits. The 64-bit
environment sets int to 32 bits and long and pointer to 64 bits.

-mbig-endian
-mlittle-endian
Generate code in big/little endian mode, respectively.

TILEPro Options

These -m options are supported on the TILEPro:

-mcpu=name
Selects the type of CPU to be targeted. Currently the only supported type is tilepro.

-m32
Generate code for a 32-bit environment, which sets int, long, and pointer to 32 bits. This is the only supported behavior so the flag
is essentially ignored.

V850 Options

These -m options are defined for V850 implementations:

-mlong-calls
-mno-long-calls
Treat all calls as being far away (near). If calls are assumed to be far away, the compiler always loads the function's address into a
register, and calls indirect through the pointer.

-mno-ep
-mep
Do not optimize (do optimize) basic blocks that use the same index pointer 4 or more times to copy pointer into the "ep" register, and
use the shorter "sld" and "sst" instructions. The -mep option is on by default if you optimize.

-mno-prolog-function
-mprolog-function
Do not use (do use) external functions to save and restore registers at the prologue and epilogue of a function. The external
functions are slower, but use less code space if more than one function saves the same number of registers. The -mprolog-function
option is on by default if you optimize.

-mspace
Try to make the code as small as possible. At present, this just turns on the -mep and -mprolog-function options.

-mtda=n
Put static or global variables whose size is n bytes or less into the tiny data area that register "ep" points to. The tiny data area
can hold up to 256 bytes in total (128 bytes for byte references).

-msda=n
Put static or global variables whose size is n bytes or less into the small data area that register "gp" points to. The small data
area can hold up to 64 kilobytes.

-mzda=n
Put static or global variables whose size is n bytes or less into the first 32 kilobytes of memory.

-mv850
Specify that the target processor is the V850.

-mv850e3v5
Specify that the target processor is the V850E3V5. The preprocessor constant "__v850e3v5__" is defined if this option is used.

-mv850e2v4
Specify that the target processor is the V850E3V5. This is an alias for the -mv850e3v5 option.

-mv850e2v3
Specify that the target processor is the V850E2V3. The preprocessor constant "__v850e2v3__" is defined if this option is used.

-mv850e2
Specify that the target processor is the V850E2. The preprocessor constant "__v850e2__" is defined if this option is used.

-mv850e1
Specify that the target processor is the V850E1. The preprocessor constants "__v850e1__" and "__v850e__" are defined if this option is
used.

-mv850es
Specify that the target processor is the V850ES. This is an alias for the -mv850e1 option.

-mv850e
Specify that the target processor is the V850E. The preprocessor constant "__v850e__" is defined if this option is used.

If neither -mv850 nor -mv850e nor -mv850e1 nor -mv850e2 nor -mv850e2v3 nor -mv850e3v5 are defined then a default target processor is
chosen and the relevant __v850*__ preprocessor constant is defined.

The preprocessor constants "__v850" and "__v851__" are always defined, regardless of which processor variant is the target.

-mdisable-callt
-mno-disable-callt
This option suppresses generation of the "CALLT" instruction for the v850e, v850e1, v850e2, v850e2v3 and v850e3v5 flavors of the v850
architecture.

This option is enabled by default when the RH850 ABI is in use (see -mrh850-abi), and disabled by default when the GCC ABI is in use.
If "CALLT" instructions are being generated then the C preprocessor symbol "__V850_CALLT__" is defined.

-mrelax
-mno-relax
Pass on (or do not pass on) the -mrelax command-line option to the assembler.

-mlong-jumps
-mno-long-jumps
Disable (or re-enable) the generation of PC-relative jump instructions.

-msoft-float
-mhard-float
Disable (or re-enable) the generation of hardware floating point instructions. This option is only significant when the target
architecture is V850E2V3 or higher. If hardware floating point instructions are being generated then the C preprocessor symbol
"__FPU_OK__" is defined, otherwise the symbol "__NO_FPU__" is defined.

-mloop
Enables the use of the e3v5 LOOP instruction. The use of this instruction is not enabled by default when the e3v5 architecture is
selected because its use is still experimental.

-mrh850-abi
-mghs
Enables support for the RH850 version of the V850 ABI. This is the default. With this version of the ABI the following rules apply:

* Integer sized structures and unions are returned via a memory pointer rather than a register.

* Large structures and unions (more than 8 bytes in size) are passed by value.

* Functions are aligned to 16-bit boundaries.

* The -m8byte-align command-line option is supported.

* The -mdisable-callt command-line option is enabled by default. The -mno-disable-callt command-line option is not supported.

When this version of the ABI is enabled the C preprocessor symbol "__V850_RH850_ABI__" is defined.

-mgcc-abi
Enables support for the old GCC version of the V850 ABI. With this version of the ABI the following rules apply:

* Integer sized structures and unions are returned in register "r10".

* Large structures and unions (more than 8 bytes in size) are passed by reference.

* Functions are aligned to 32-bit boundaries, unless optimizing for size.

* The -m8byte-align command-line option is not supported.

* The -mdisable-callt command-line option is supported but not enabled by default.

When this version of the ABI is enabled the C preprocessor symbol "__V850_GCC_ABI__" is defined.

-m8byte-align
-mno-8byte-align
Enables support for "double" and "long long" types to be aligned on 8-byte boundaries. The default is to restrict the alignment of all
objects to at most 4-bytes. When -m8byte-align is in effect the C preprocessor symbol "__V850_8BYTE_ALIGN__" is defined.

-mbig-switch
Generate code suitable for big switch tables. Use this option only if the assembler/linker complain about out of range branches within
a switch table.

-mapp-regs
This option causes r2 and r5 to be used in the code generated by the compiler. This setting is the default.

-mno-app-regs
This option causes r2 and r5 to be treated as fixed registers.

VAX Options

These -m options are defined for the VAX:

-munix
Do not output certain jump instructions ("aobleq" and so on) that the Unix assembler for the VAX cannot handle across long ranges.

-mgnu
Do output those jump instructions, on the assumption that the GNU assembler is being used.

-mg Output code for G-format floating-point numbers instead of D-format.

Visium Options

-mdebug
A program which performs file I/O and is destined to run on an MCM target should be linked with this option. It causes the libraries
libc.a and libdebug.a to be linked. The program should be run on the target under the control of the GDB remote debugging stub.

-msim
A program which performs file I/O and is destined to run on the simulator should be linked with option. This causes libraries libc.a
and libsim.a to be linked.

-mfpu
-mhard-float
Generate code containing floating-point instructions. This is the default.

-mno-fpu
-msoft-float
Generate code containing library calls for floating-point.

-mcpu=cpu_type
Set the instruction set, register set, and instruction scheduling parameters for machine type cpu_type. Supported values for cpu_type
are mcm, gr5 and gr6.

mcm is a synonym of gr5 present for backward compatibility.

By default (unless configured otherwise), GCC generates code for the GR5 variant of the Visium architecture.

With -mcpu=gr6, GCC generates code for the GR6 variant of the Visium architecture. The only difference from GR5 code is that the
compiler will generate block move instructions.

-mtune=cpu_type
Set the instruction scheduling parameters for machine type cpu_type, but do not set the instruction set or register set that the option
-mcpu=cpu_type would.

-msv-mode
Generate code for the supervisor mode, where there are no restrictions on the access to general registers. This is the default.

-muser-mode
Generate code for the user mode, where the access to some general registers is forbidden: on the GR5, registers r24 to r31 cannot be
accessed in this mode; on the GR6, only registers r29 to r31 are affected.

VMS Options

These -m options are defined for the VMS implementations:

-mvms-return-codes
Return VMS condition codes from "main". The default is to return POSIX-style condition (e.g. error) codes.

-mdebug-main=prefix
Flag the first routine whose name starts with prefix as the main routine for the debugger.

-mmalloc64
Default to 64-bit memory allocation routines.

-mpointer-size=size
Set the default size of pointers. Possible options for size are 32 or short for 32 bit pointers, 64 or long for 64 bit pointers, and no
for supporting only 32 bit pointers. The later option disables "pragma pointer_size".

VxWorks Options

The options in this section are defined for all VxWorks targets. Options specific to the target hardware are listed with the other options
for that target.

-mrtp
GCC can generate code for both VxWorks kernels and real time processes (RTPs). This option switches from the former to the latter. It
also defines the preprocessor macro "__RTP__".

-non-static
Link an RTP executable against shared libraries rather than static libraries. The options -static and -shared can also be used for
RTPs; -static is the default.

-Bstatic
-Bdynamic
These options are passed down to the linker. They are defined for compatibility with Diab.

-Xbind-lazy
Enable lazy binding of function calls. This option is equivalent to -Wl,-z,now and is defined for compatibility with Diab.

-Xbind-now
Disable lazy binding of function calls. This option is the default and is defined for compatibility with Diab.

x86 Options

These -m options are defined for the x86 family of computers.

-march=cpu-type
Generate instructions for the machine type cpu-type. In contrast to -mtune=cpu-type, which merely tunes the generated code for the
specified cpu-type, -march=cpu-type allows GCC to generate code that may not run at all on processors other than the one indicated.
Specifying -march=cpu-type implies -mtune=cpu-type.

The choices for cpu-type are:

native
This selects the CPU to generate code for at compilation time by determining the processor type of the compiling machine. Using
-march=native enables all instruction subsets supported by the local machine (hence the result might not run on different
machines). Using -mtune=native produces code optimized for the local machine under the constraints of the selected instruction
set.

i386
Original Intel i386 CPU.

i486
Intel i486 CPU. (No scheduling is implemented for this chip.)

i586
pentium
Intel Pentium CPU with no MMX support.

lakemont
Intel Lakemont MCU, based on Intel Pentium CPU.

pentium-mmx
Intel Pentium MMX CPU, based on Pentium core with MMX instruction set support.

pentiumpro
Intel Pentium Pro CPU.

i686
When used with -march, the Pentium Pro instruction set is used, so the code runs on all i686 family chips. When used with -mtune,
it has the same meaning as generic.

pentium2
Intel Pentium II CPU, based on Pentium Pro core with MMX instruction set support.

pentium3
pentium3m
Intel Pentium III CPU, based on Pentium Pro core with MMX and SSE instruction set support.

pentium-m
Intel Pentium M; low-power version of Intel Pentium III CPU with MMX, SSE and SSE2 instruction set support. Used by Centrino
notebooks.

pentium4
pentium4m
Intel Pentium 4 CPU with MMX, SSE and SSE2 instruction set support.

prescott
Improved version of Intel Pentium 4 CPU with MMX, SSE, SSE2 and SSE3 instruction set support.

nocona
Improved version of Intel Pentium 4 CPU with 64-bit extensions, MMX, SSE, SSE2 and SSE3 instruction set support.

core2
Intel Core 2 CPU with 64-bit extensions, MMX, SSE, SSE2, SSE3 and SSSE3 instruction set support.

nehalem
Intel Nehalem CPU with 64-bit extensions, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2 and POPCNT instruction set support.

westmere
Intel Westmere CPU with 64-bit extensions, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, POPCNT, AES and PCLMUL instruction set
support.

sandybridge
Intel Sandy Bridge CPU with 64-bit extensions, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, POPCNT, AVX, AES and PCLMUL instruction
set support.

ivybridge
Intel Ivy Bridge CPU with 64-bit extensions, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, POPCNT, AVX, AES, PCLMUL, FSGSBASE, RDRND
and F16C instruction set support.

haswell
Intel Haswell CPU with 64-bit extensions, MOVBE, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, POPCNT, AVX, AVX2, AES, PCLMUL,
FSGSBASE, RDRND, FMA, BMI, BMI2 and F16C instruction set support.

broadwell
Intel Broadwell CPU with 64-bit extensions, MOVBE, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, POPCNT, AVX, AVX2, AES, PCLMUL,
FSGSBASE, RDRND, FMA, BMI, BMI2, F16C, RDSEED, ADCX and PREFETCHW instruction set support.

skylake
Intel Skylake CPU with 64-bit extensions, MOVBE, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, POPCNT, AVX, AVX2, AES, PCLMUL,
FSGSBASE, RDRND, FMA, BMI, BMI2, F16C, RDSEED, ADCX, PREFETCHW, CLFLUSHOPT, XSAVEC and XSAVES instruction set support.

bonnell
Intel Bonnell CPU with 64-bit extensions, MOVBE, MMX, SSE, SSE2, SSE3 and SSSE3 instruction set support.

silvermont
Intel Silvermont CPU with 64-bit extensions, MOVBE, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, POPCNT, AES, PCLMUL and RDRND
instruction set support.

knl Intel Knight's Landing CPU with 64-bit extensions, MOVBE, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, POPCNT, AVX, AVX2, AES,
PCLMUL, FSGSBASE, RDRND, FMA, BMI, BMI2, F16C, RDSEED, ADCX, PREFETCHW, AVX512F, AVX512PF, AVX512ER and AVX512CD instruction set
support.

skylake-avx512
Intel Skylake Server CPU with 64-bit extensions, MOVBE, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, POPCNT, PKU, AVX, AVX2, AES,
PCLMUL, FSGSBASE, RDRND, FMA, BMI, BMI2, F16C, RDSEED, ADCX, PREFETCHW, CLFLUSHOPT, XSAVEC, XSAVES, AVX512F, AVX512VL, AVX512BW,
AVX512DQ and AVX512CD instruction set support.

k6 AMD K6 CPU with MMX instruction set support.

k6-2
k6-3
Improved versions of AMD K6 CPU with MMX and 3DNow! instruction set support.

athlon
athlon-tbird
AMD Athlon CPU with MMX, 3dNOW!, enhanced 3DNow! and SSE prefetch instructions support.

athlon-4
athlon-xp
athlon-mp
Improved AMD Athlon CPU with MMX, 3DNow!, enhanced 3DNow! and full SSE instruction set support.

k8
opteron
athlon64
athlon-fx
Processors based on the AMD K8 core with x86-64 instruction set support, including the AMD Opteron, Athlon 64, and Athlon 64 FX
processors. (This supersets MMX, SSE, SSE2, 3DNow!, enhanced 3DNow! and 64-bit instruction set extensions.)

k8-sse3
opteron-sse3
athlon64-sse3
Improved versions of AMD K8 cores with SSE3 instruction set support.

amdfam10
barcelona
CPUs based on AMD Family 10h cores with x86-64 instruction set support. (This supersets MMX, SSE, SSE2, SSE3, SSE4A, 3DNow!,
enhanced 3DNow!, ABM and 64-bit instruction set extensions.)

bdver1
CPUs based on AMD Family 15h cores with x86-64 instruction set support. (This supersets FMA4, AVX, XOP, LWP, AES, PCL_MUL, CX16,
MMX, SSE, SSE2, SSE3, SSE4A, SSSE3, SSE4.1, SSE4.2, ABM and 64-bit instruction set extensions.)

bdver2
AMD Family 15h core based CPUs with x86-64 instruction set support. (This supersets BMI, TBM, F16C, FMA, FMA4, AVX, XOP, LWP, AES,
PCL_MUL, CX16, MMX, SSE, SSE2, SSE3, SSE4A, SSSE3, SSE4.1, SSE4.2, ABM and 64-bit instruction set extensions.)

bdver3
AMD Family 15h core based CPUs with x86-64 instruction set support. (This supersets BMI, TBM, F16C, FMA, FMA4, FSGSBASE, AVX, XOP,
LWP, AES, PCL_MUL, CX16, MMX, SSE, SSE2, SSE3, SSE4A, SSSE3, SSE4.1, SSE4.2, ABM and 64-bit instruction set extensions.

bdver4
AMD Family 15h core based CPUs with x86-64 instruction set support. (This supersets BMI, BMI2, TBM, F16C, FMA, FMA4, FSGSBASE,
AVX, AVX2, XOP, LWP, AES, PCL_MUL, CX16, MOVBE, MMX, SSE, SSE2, SSE3, SSE4A, SSSE3, SSE4.1, SSE4.2, ABM and 64-bit instruction set
extensions.

znver1
AMD Family 17h core based CPUs with x86-64 instruction set support. (This supersets BMI, BMI2, F16C, FMA, FSGSBASE, AVX, AVX2,
ADCX, RDSEED, MWAITX, SHA, CLZERO, AES, PCL_MUL, CX16, MOVBE, MMX, SSE, SSE2, SSE3, SSE4A, SSSE3, SSE4.1, SSE4.2, ABM, XSAVEC,
XSAVES, CLFLUSHOPT, POPCNT, and 64-bit instruction set extensions.

btver1
CPUs based on AMD Family 14h cores with x86-64 instruction set support. (This supersets MMX, SSE, SSE2, SSE3, SSSE3, SSE4A, CX16,
ABM and 64-bit instruction set extensions.)

btver2
CPUs based on AMD Family 16h cores with x86-64 instruction set support. This includes MOVBE, F16C, BMI, AVX, PCL_MUL, AES, SSE4.2,
SSE4.1, CX16, ABM, SSE4A, SSSE3, SSE3, SSE2, SSE, MMX and 64-bit instruction set extensions.

winchip-c6
IDT WinChip C6 CPU, dealt in same way as i486 with additional MMX instruction set support.

winchip2
IDT WinChip 2 CPU, dealt in same way as i486 with additional MMX and 3DNow! instruction set support.

c3 VIA C3 CPU with MMX and 3DNow! instruction set support. (No scheduling is implemented for this chip.)

c3-2
VIA C3-2 (Nehemiah/C5XL) CPU with MMX and SSE instruction set support. (No scheduling is implemented for this chip.)

c7 VIA C7 (Esther) CPU with MMX, SSE, SSE2 and SSE3 instruction set support. (No scheduling is implemented for this chip.)

samuel-2
VIA Eden Samuel 2 CPU with MMX and 3DNow! instruction set support. (No scheduling is implemented for this chip.)

nehemiah
VIA Eden Nehemiah CPU with MMX and SSE instruction set support. (No scheduling is implemented for this chip.)

esther
VIA Eden Esther CPU with MMX, SSE, SSE2 and SSE3 instruction set support. (No scheduling is implemented for this chip.)

eden-x2
VIA Eden X2 CPU with x86-64, MMX, SSE, SSE2 and SSE3 instruction set support. (No scheduling is implemented for this chip.)

eden-x4
VIA Eden X4 CPU with x86-64, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, AVX and AVX2 instruction set support. (No scheduling is
implemented for this chip.)

nano
Generic VIA Nano CPU with x86-64, MMX, SSE, SSE2, SSE3 and SSSE3 instruction set support. (No scheduling is implemented for this
chip.)

nano-1000
VIA Nano 1xxx CPU with x86-64, MMX, SSE, SSE2, SSE3 and SSSE3 instruction set support. (No scheduling is implemented for this
chip.)

nano-2000
VIA Nano 2xxx CPU with x86-64, MMX, SSE, SSE2, SSE3 and SSSE3 instruction set support. (No scheduling is implemented for this
chip.)

nano-3000
VIA Nano 3xxx CPU with x86-64, MMX, SSE, SSE2, SSE3, SSSE3 and SSE4.1 instruction set support. (No scheduling is implemented for
this chip.)

nano-x2
VIA Nano Dual Core CPU with x86-64, MMX, SSE, SSE2, SSE3, SSSE3 and SSE4.1 instruction set support. (No scheduling is implemented
for this chip.)

nano-x4
VIA Nano Quad Core CPU with x86-64, MMX, SSE, SSE2, SSE3, SSSE3 and SSE4.1 instruction set support. (No scheduling is implemented
for this chip.)

geode
AMD Geode embedded processor with MMX and 3DNow! instruction set support.

-mtune=cpu-type
Tune to cpu-type everything applicable about the generated code, except for the ABI and the set of available instructions. While
picking a specific cpu-type schedules things appropriately for that particular chip, the compiler does not generate any code that
cannot run on the default machine type unless you use a -march=cpu-type option. For example, if GCC is configured for
i686-pc-linux-gnu then -mtune=pentium4 generates code that is tuned for Pentium 4 but still runs on i686 machines.

The choices for cpu-type are the same as for -march. In addition, -mtune supports 2 extra choices for cpu-type:

generic
Produce code optimized for the most common IA32/AMD64/EM64T processors. If you know the CPU on which your code will run, then you
should use the corresponding -mtune or -march option instead of -mtune=generic. But, if you do not know exactly what CPU users of
your application will have, then you should use this option.

As new processors are deployed in the marketplace, the behavior of this option will change. Therefore, if you upgrade to a newer
version of GCC, code generation controlled by this option will change to reflect the processors that are most common at the time
that version of GCC is released.

There is no -march=generic option because -march indicates the instruction set the compiler can use, and there is no generic
instruction set applicable to all processors. In contrast, -mtune indicates the processor (or, in this case, collection of
processors) for which the code is optimized.

intel
Produce code optimized for the most current Intel processors, which are Haswell and Silvermont for this version of GCC. If you
know the CPU on which your code will run, then you should use the corresponding -mtune or -march option instead of -mtune=intel.
But, if you want your application performs better on both Haswell and Silvermont, then you should use this option.

As new Intel processors are deployed in the marketplace, the behavior of this option will change. Therefore, if you upgrade to a
newer version of GCC, code generation controlled by this option will change to reflect the most current Intel processors at the
time that version of GCC is released.

There is no -march=intel option because -march indicates the instruction set the compiler can use, and there is no common
instruction set applicable to all processors. In contrast, -mtune indicates the processor (or, in this case, collection of
processors) for which the code is optimized.

-mcpu=cpu-type
A deprecated synonym for -mtune.

-mfpmath=unit
Generate floating-point arithmetic for selected unit unit. The choices for unit are:

387 Use the standard 387 floating-point coprocessor present on the majority of chips and emulated otherwise. Code compiled with this
option runs almost everywhere. The temporary results are computed in 80-bit precision instead of the precision specified by the
type, resulting in slightly different results compared to most of other chips. See -ffloat-store for more detailed description.

This is the default choice for non-Darwin x86-32 targets.

sse Use scalar floating-point instructions present in the SSE instruction set. This instruction set is supported by Pentium III and
newer chips, and in the AMD line by Athlon-4, Athlon XP and Athlon MP chips. The earlier version of the SSE instruction set
supports only single-precision arithmetic, thus the double and extended-precision arithmetic are still done using 387. A later
version, present only in Pentium 4 and AMD x86-64 chips, supports double-precision arithmetic too.

For the x86-32 compiler, you must use -march=cpu-type, -msse or -msse2 switches to enable SSE extensions and make this option
effective. For the x86-64 compiler, these extensions are enabled by default.

The resulting code should be considerably faster in the majority of cases and avoid the numerical instability problems of 387 code,
but may break some existing code that expects temporaries to be 80 bits.

This is the default choice for the x86-64 compiler, Darwin x86-32 targets, and the default choice for x86-32 targets with the SSE2
instruction set when -ffast-math is enabled.

sse,387
sse+387
both
Attempt to utilize both instruction sets at once. This effectively doubles the amount of available registers, and on chips with
separate execution units for 387 and SSE the execution resources too. Use this option with care, as it is still experimental,
because the GCC register allocator does not model separate functional units well, resulting in unstable performance.

-masm=dialect
Output assembly instructions using selected dialect. Also affects which dialect is used for basic "asm" and extended "asm". Supported
choices (in dialect order) are att or intel. The default is att. Darwin does not support intel.

-mieee-fp
-mno-ieee-fp
Control whether or not the compiler uses IEEE floating-point comparisons. These correctly handle the case where the result of a
comparison is unordered.

-m80387
-mhard-float
Generate output containing 80387 instructions for floating point.

-mno-80387
-msoft-float
Generate output containing library calls for floating point.

Warning: the requisite libraries are not part of GCC. Normally the facilities of the machine's usual C compiler are used, but this
cannot be done directly in cross-compilation. You must make your own arrangements to provide suitable library functions for cross-
compilation.

On machines where a function returns floating-point results in the 80387 register stack, some floating-point opcodes may be emitted
even if -msoft-float is used.

-mno-fp-ret-in-387
Do not use the FPU registers for return values of functions.

The usual calling convention has functions return values of types "float" and "double" in an FPU register, even if there is no FPU.
The idea is that the operating system should emulate an FPU.

The option -mno-fp-ret-in-387 causes such values to be returned in ordinary CPU registers instead.

-mno-fancy-math-387
Some 387 emulators do not support the "sin", "cos" and "sqrt" instructions for the 387. Specify this option to avoid generating those
instructions. This option is the default on OpenBSD and NetBSD. This option is overridden when -march indicates that the target CPU
always has an FPU and so the instruction does not need emulation. These instructions are not generated unless you also use the
-funsafe-math-optimizations switch.

-malign-double
-mno-align-double
Control whether GCC aligns "double", "long double", and "long long" variables on a two-word boundary or a one-word boundary. Aligning
"double" variables on a two-word boundary produces code that runs somewhat faster on a Pentium at the expense of more memory.

On x86-64, -malign-double is enabled by default.

Warning: if you use the -malign-double switch, structures containing the above types are aligned differently than the published
application binary interface specifications for the x86-32 and are not binary compatible with structures in code compiled without that
switch.

-m96bit-long-double
-m128bit-long-double
These switches control the size of "long double" type. The x86-32 application binary interface specifies the size to be 96 bits, so
-m96bit-long-double is the default in 32-bit mode.

Modern architectures (Pentium and newer) prefer "long double" to be aligned to an 8- or 16-byte boundary. In arrays or structures
conforming to the ABI, this is not possible. So specifying -m128bit-long-double aligns "long double" to a 16-byte boundary by padding
the "long double" with an additional 32-bit zero.

In the x86-64 compiler, -m128bit-long-double is the default choice as its ABI specifies that "long double" is aligned on 16-byte
boundary.

Notice that neither of these options enable any extra precision over the x87 standard of 80 bits for a "long double".

Warning: if you override the default value for your target ABI, this changes the size of structures and arrays containing "long double"
variables, as well as modifying the function calling convention for functions taking "long double". Hence they are not binary-
compatible with code compiled without that switch.

-mlong-double-64
-mlong-double-80
-mlong-double-128
These switches control the size of "long double" type. A size of 64 bits makes the "long double" type equivalent to the "double" type.
This is the default for 32-bit Bionic C library. A size of 128 bits makes the "long double" type equivalent to the "__float128" type.
This is the default for 64-bit Bionic C library.

-malign-data=type
Control how GCC aligns variables. Supported values for type are compat uses increased alignment value compatible uses GCC 4.8 and
earlier, abi uses alignment value as specified by the psABI, and cacheline uses increased alignment value to match the cache line size.
compat is the default.

-mlarge-data-threshold=threshold
When -mcmodel=medium is specified, data objects larger than threshold are placed in the large data section. This value must be the
same across all objects linked into the binary, and defaults to 65535.

-mrtd
Use a different function-calling convention, in which functions that take a fixed number of arguments return with the "ret num"
instruction, which pops their arguments while returning. This saves one instruction in the caller since there is no need to pop the
arguments there.

You can specify that an individual function is called with this calling sequence with the function attribute "stdcall". You can also
override the -mrtd option by using the function attribute "cdecl".

Warning: this calling convention is incompatible with the one normally used on Unix, so you cannot use it if you need to call libraries
compiled with the Unix compiler.

Also, you must provide function prototypes for all functions that take variable numbers of arguments (including "printf"); otherwise
incorrect code is generated for calls to those functions.

In addition, seriously incorrect code results if you call a function with too many arguments. (Normally, extra arguments are
harmlessly ignored.)

-mregparm=num
Control how many registers are used to pass integer arguments. By default, no registers are used to pass arguments, and at most 3
registers can be used. You can control this behavior for a specific function by using the function attribute "regparm".

Warning: if you use this switch, and num is nonzero, then you must build all modules with the same value, including any libraries.
This includes the system libraries and startup modules.

-msseregparm
Use SSE register passing conventions for float and double arguments and return values. You can control this behavior for a specific
function by using the function attribute "sseregparm".

Warning: if you use this switch then you must build all modules with the same value, including any libraries. This includes the system
libraries and startup modules.

-mvect8-ret-in-mem
Return 8-byte vectors in memory instead of MMX registers. This is the default on Solaris@tie{}8 and 9 and VxWorks to match the ABI of
the Sun Studio compilers until version 12. Later compiler versions (starting with Studio 12 Update@tie{}1) follow the ABI used by
other x86 targets, which is the default on Solaris@tie{}10 and later. Only use this option if you need to remain compatible with
existing code produced by those previous compiler versions or older versions of GCC.

-mpc32
-mpc64
-mpc80
Set 80387 floating-point precision to 32, 64 or 80 bits. When -mpc32 is specified, the significands of results of floating-point
operations are rounded to 24 bits (single precision); -mpc64 rounds the significands of results of floating-point operations to 53 bits
(double precision) and -mpc80 rounds the significands of results of floating-point operations to 64 bits (extended double precision),
which is the default. When this option is used, floating-point operations in higher precisions are not available to the programmer
without setting the FPU control word explicitly.

Setting the rounding of floating-point operations to less than the default 80 bits can speed some programs by 2% or more. Note that
some mathematical libraries assume that extended-precision (80-bit) floating-point operations are enabled by default; routines in such
libraries could suffer significant loss of accuracy, typically through so-called "catastrophic cancellation", when this option is used
to set the precision to less than extended precision.

-mstackrealign
Realign the stack at entry. On the x86, the -mstackrealign option generates an alternate prologue and epilogue that realigns the run-
time stack if necessary. This supports mixing legacy codes that keep 4-byte stack alignment with modern codes that keep 16-byte stack
alignment for SSE compatibility. See also the attribute "force_align_arg_pointer", applicable to individual functions.

-mpreferred-stack-boundary=num
Attempt to keep the stack boundary aligned to a 2 raised to num byte boundary. If -mpreferred-stack-boundary is not specified, the
default is 4 (16 bytes or 128 bits).

Warning: When generating code for the x86-64 architecture with SSE extensions disabled, -mpreferred-stack-boundary=3 can be used to
keep the stack boundary aligned to 8 byte boundary. Since x86-64 ABI require 16 byte stack alignment, this is ABI incompatible and
intended to be used in controlled environment where stack space is important limitation. This option leads to wrong code when
functions compiled with 16 byte stack alignment (such as functions from a standard library) are called with misaligned stack. In this
case, SSE instructions may lead to misaligned memory access traps. In addition, variable arguments are handled incorrectly for 16 byte
aligned objects (including x87 long double and __int128), leading to wrong results. You must build all modules with
-mpreferred-stack-boundary=3, including any libraries. This includes the system libraries and startup modules.

-mincoming-stack-boundary=num
Assume the incoming stack is aligned to a 2 raised to num byte boundary. If -mincoming-stack-boundary is not specified, the one
specified by -mpreferred-stack-boundary is used.

On Pentium and Pentium Pro, "double" and "long double" values should be aligned to an 8-byte boundary (see -malign-double) or suffer
significant run time performance penalties. On Pentium III, the Streaming SIMD Extension (SSE) data type "__m128" may not work
properly if it is not 16-byte aligned.

To ensure proper alignment of this values on the stack, the stack boundary must be as aligned as that required by any value stored on
the stack. Further, every function must be generated such that it keeps the stack aligned. Thus calling a function compiled with a
higher preferred stack boundary from a function compiled with a lower preferred stack boundary most likely misaligns the stack. It is
recommended that libraries that use callbacks always use the default setting.

This extra alignment does consume extra stack space, and generally increases code size. Code that is sensitive to stack space usage,
such as embedded systems and operating system kernels, may want to reduce the preferred alignment to -mpreferred-stack-boundary=2.

-mmmx
-msse
-msse2
-msse3
-mssse3
-msse4
-msse4a
-msse4.1
-msse4.2
-mavx
-mavx2
-mavx512f
-mavx512pf
-mavx512er
-mavx512cd
-mavx512vl
-mavx512bw
-mavx512dq
-mavx512ifma
-mavx512vbmi
-msha
-maes
-mpclmul
-mclflushopt
-mfsgsbase
-mrdrnd
-mf16c
-mfma
-mfma4
-mprefetchwt1
-mxop
-mlwp
-m3dnow
-m3dnowa
-mpopcnt
-mabm
-mbmi
-mbmi2
-mlzcnt
-mfxsr
-mxsave
-mxsaveopt
-mxsavec
-mxsaves
-mrtm
-mtbm
-mmpx
-mmwaitx
-mclzero
-mpku
These switches enable the use of instructions in the MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, AVX, AVX2, AVX512F, AVX512PF, AVX512ER,
AVX512CD, SHA, AES, PCLMUL, FSGSBASE, RDRND, F16C, FMA, SSE4A, FMA4, XOP, LWP, ABM, AVX512VL, AVX512BW, AVX512DQ, AVX512IFMA
AVX512VBMI, BMI, BMI2, FXSR, XSAVE, XSAVEOPT, LZCNT, RTM, MPX, MWAITX, PKU, 3DNow! or enhanced 3DNow! extended instruction sets. Each
has a corresponding -mno- option to disable use of these instructions.

These extensions are also available as built-in functions: see x86 Built-in Functions, for details of the functions enabled and
disabled by these switches.

To generate SSE/SSE2 instructions automatically from floating-point code (as opposed to 387 instructions), see -mfpmath=sse.

GCC depresses SSEx instructions when -mavx is used. Instead, it generates new AVX instructions or AVX equivalence for all SSEx
instructions when needed.

These options enable GCC to use these extended instructions in generated code, even without -mfpmath=sse. Applications that perform
run-time CPU detection must compile separate files for each supported architecture, using the appropriate flags. In particular, the
file containing the CPU detection code should be compiled without these options.

-mdump-tune-features
This option instructs GCC to dump the names of the x86 performance tuning features and default settings. The names can be used in
-mtune-ctrl=feature-list.

-mtune-ctrl=feature-list
This option is used to do fine grain control of x86 code generation features. feature-list is a comma separated list of feature names.
See also -mdump-tune-features. When specified, the feature is turned on if it is not preceded with ^, otherwise, it is turned off.
-mtune-ctrl=feature-list is intended to be used by GCC developers. Using it may lead to code paths not covered by testing and can
potentially result in compiler ICEs or runtime errors.

-mno-default
This option instructs GCC to turn off all tunable features. See also -mtune-ctrl=feature-list and -mdump-tune-features.

-mcld
This option instructs GCC to emit a "cld" instruction in the prologue of functions that use string instructions. String instructions
depend on the DF flag to select between autoincrement or autodecrement mode. While the ABI specifies the DF flag to be cleared on
function entry, some operating systems violate this specification by not clearing the DF flag in their exception dispatchers. The
exception handler can be invoked with the DF flag set, which leads to wrong direction mode when string instructions are used. This
option can be enabled by default on 32-bit x86 targets by configuring GCC with the --enable-cld configure option. Generation of "cld"
instructions can be suppressed with the -mno-cld compiler option in this case.

-mvzeroupper
This option instructs GCC to emit a "vzeroupper" instruction before a transfer of control flow out of the function to minimize the AVX
to SSE transition penalty as well as remove unnecessary "zeroupper" intrinsics.

-mprefer-avx128
This option instructs GCC to use 128-bit AVX instructions instead of 256-bit AVX instructions in the auto-vectorizer.

-mcx16
This option enables GCC to generate "CMPXCHG16B" instructions in 64-bit code to implement compare-and-exchange operations on 16-byte
aligned 128-bit objects. This is useful for atomic updates of data structures exceeding one machine word in size. The compiler uses
this instruction to implement __sync Builtins. However, for __atomic Builtins operating on 128-bit integers, a library call is always
used.

-msahf
This option enables generation of "SAHF" instructions in 64-bit code. Early Intel Pentium 4 CPUs with Intel 64 support, prior to the
introduction of Pentium 4 G1 step in December 2005, lacked the "LAHF" and "SAHF" instructions which are supported by AMD64. These are
load and store instructions, respectively, for certain status flags. In 64-bit mode, the "SAHF" instruction is used to optimize
"fmod", "drem", and "remainder" built-in functions; see Other Builtins for details.

-mmovbe
This option enables use of the "movbe" instruction to implement "__builtin_bswap32" and "__builtin_bswap64".

-mcrc32
This option enables built-in functions "__builtin_ia32_crc32qi", "__builtin_ia32_crc32hi", "__builtin_ia32_crc32si" and
"__builtin_ia32_crc32di" to generate the "crc32" machine instruction.

-mrecip
This option enables use of "RCPSS" and "RSQRTSS" instructions (and their vectorized variants "RCPPS" and "RSQRTPS") with an additional
Newton-Raphson step to increase precision instead of "DIVSS" and "SQRTSS" (and their vectorized variants) for single-precision
floating-point arguments. These instructions are generated only when -funsafe-math-optimizations is enabled together with
-ffinite-math-only and -fno-trapping-math. Note that while the throughput of the sequence is higher than the throughput of the non-
reciprocal instruction, the precision of the sequence can be decreased by up to 2 ulp (i.e. the inverse of 1.0 equals 0.99999994).

Note that GCC implements "1.0f/sqrtf(x)" in terms of "RSQRTSS" (or "RSQRTPS") already with -ffast-math (or the above option
combination), and doesn't need -mrecip.

Also note that GCC emits the above sequence with additional Newton-Raphson step for vectorized single-float division and vectorized
"sqrtf(x)" already with -ffast-math (or the above option combination), and doesn't need -mrecip.

-mrecip=opt
This option controls which reciprocal estimate instructions may be used. opt is a comma-separated list of options, which may be
preceded by a ! to invert the option:

all Enable all estimate instructions.

default
Enable the default instructions, equivalent to -mrecip.

none
Disable all estimate instructions, equivalent to -mno-recip.

div Enable the approximation for scalar division.

vec-div
Enable the approximation for vectorized division.

sqrt
Enable the approximation for scalar square root.

vec-sqrt
Enable the approximation for vectorized square root.

So, for example, -mrecip=all,!sqrt enables all of the reciprocal approximations, except for square root.

-mveclibabi=type
Specifies the ABI type to use for vectorizing intrinsics using an external library. Supported values for type are svml for the Intel
short vector math library and acml for the AMD math core library. To use this option, both -ftree-vectorize and
-funsafe-math-optimizations have to be enabled, and an SVML or ACML ABI-compatible library must be specified at link time.

GCC currently emits calls to "vmldExp2", "vmldLn2", "vmldLog102", "vmldLog102", "vmldPow2", "vmldTanh2", "vmldTan2", "vmldAtan2",
"vmldAtanh2", "vmldCbrt2", "vmldSinh2", "vmldSin2", "vmldAsinh2", "vmldAsin2", "vmldCosh2", "vmldCos2", "vmldAcosh2", "vmldAcos2",
"vmlsExp4", "vmlsLn4", "vmlsLog104", "vmlsLog104", "vmlsPow4", "vmlsTanh4", "vmlsTan4", "vmlsAtan4", "vmlsAtanh4", "vmlsCbrt4",
"vmlsSinh4", "vmlsSin4", "vmlsAsinh4", "vmlsAsin4", "vmlsCosh4", "vmlsCos4", "vmlsAcosh4" and "vmlsAcos4" for corresponding function
type when -mveclibabi=svml is used, and "__vrd2_sin", "__vrd2_cos", "__vrd2_exp", "__vrd2_log", "__vrd2_log2", "__vrd2_log10",
"__vrs4_sinf", "__vrs4_cosf", "__vrs4_expf", "__vrs4_logf", "__vrs4_log2f", "__vrs4_log10f" and "__vrs4_powf" for the corresponding
function type when -mveclibabi=acml is used.

-mabi=name
Generate code for the specified calling convention. Permissible values are sysv for the ABI used on GNU/Linux and other systems, and
ms for the Microsoft ABI. The default is to use the Microsoft ABI when targeting Microsoft Windows and the SysV ABI on all other
systems. You can control this behavior for specific functions by using the function attributes "ms_abi" and "sysv_abi".

-mtls-dialect=type
Generate code to access thread-local storage using the gnu or gnu2 conventions. gnu is the conservative default; gnu2 is more
efficient, but it may add compile- and run-time requirements that cannot be satisfied on all systems.

-mpush-args
-mno-push-args
Use PUSH operations to store outgoing parameters. This method is shorter and usually equally fast as method using SUB/MOV operations
and is enabled by default. In some cases disabling it may improve performance because of improved scheduling and reduced dependencies.

-maccumulate-outgoing-args
If enabled, the maximum amount of space required for outgoing arguments is computed in the function prologue. This is faster on most
modern CPUs because of reduced dependencies, improved scheduling and reduced stack usage when the preferred stack boundary is not equal
to 2. The drawback is a notable increase in code size. This switch implies -mno-push-args.

-mthreads
Support thread-safe exception handling on MinGW. Programs that rely on thread-safe exception handling must compile and link all code
with the -mthreads option. When compiling, -mthreads defines -D_MT; when linking, it links in a special thread helper library
-lmingwthrd which cleans up per-thread exception-handling data.

-mms-bitfields
-mno-ms-bitfields
Enable/disable bit-field layout compatible with the native Microsoft Windows compiler.

If "packed" is used on a structure, or if bit-fields are used, it may be that the Microsoft ABI lays out the structure differently than
the way GCC normally does. Particularly when moving packed data between functions compiled with GCC and the native Microsoft compiler
(either via function call or as data in a file), it may be necessary to access either format.

This option is enabled by default for Microsoft Windows targets. This behavior can also be controlled locally by use of variable or
type attributes. For more information, see x86 Variable Attributes and x86 Type Attributes.

The Microsoft structure layout algorithm is fairly simple with the exception of the bit-field packing. The padding and alignment of
members of structures and whether a bit-field can straddle a storage-unit boundary are determine by these rules:

1. Structure members are stored sequentially in the order in which they are
declared: the first member has the lowest memory address and the last member the highest.

2. Every data object has an alignment requirement. The alignment requirement
for all data except structures, unions, and arrays is either the size of the object or the current packing size (specified with
either the "aligned" attribute or the "pack" pragma), whichever is less. For structures, unions, and arrays, the alignment
requirement is the largest alignment requirement of its members. Every object is allocated an offset so that:

offset % alignment_requirement == 0

3. Adjacent bit-fields are packed into the same 1-, 2-, or 4-byte allocation
unit if the integral types are the same size and if the next bit-field fits into the current allocation unit without crossing the
boundary imposed by the common alignment requirements of the bit-fields.

MSVC interprets zero-length bit-fields in the following ways:

1. If a zero-length bit-field is inserted between two bit-fields that
are normally coalesced, the bit-fields are not coalesced.

For example:

struct
{
unsigned long bf_1 : 12;
unsigned long : 0;
unsigned long bf_2 : 12;
} t1;

The size of "t1" is 8 bytes with the zero-length bit-field. If the zero-length bit-field were removed, "t1"'s size would be 4
bytes.

2. If a zero-length bit-field is inserted after a bit-field, "foo", and the
alignment of the zero-length bit-field is greater than the member that follows it, "bar", "bar" is aligned as the type of the zero-
length bit-field.

For example:

struct
{
char foo : 4;
short : 0;
char bar;
} t2;

struct
{
char foo : 4;
short : 0;
double bar;
} t3;

For "t2", "bar" is placed at offset 2, rather than offset 1. Accordingly, the size of "t2" is 4. For "t3", the zero-length bit-
field does not affect the alignment of "bar" or, as a result, the size of the structure.

Taking this into account, it is important to note the following:

1. If a zero-length bit-field follows a normal bit-field, the type of the
zero-length bit-field may affect the alignment of the structure as whole. For example, "t2" has a size of 4 bytes, since the
zero-length bit-field follows a normal bit-field, and is of type short.

2. Even if a zero-length bit-field is not followed by a normal bit-field, it may
still affect the alignment of the structure:

struct
{
char foo : 6;
long : 0;
} t4;

Here, "t4" takes up 4 bytes.

3. Zero-length bit-fields following non-bit-field members are ignored:
struct
{
char foo;
long : 0;
char bar;
} t5;

Here, "t5" takes up 2 bytes.

-mno-align-stringops
Do not align the destination of inlined string operations. This switch reduces code size and improves performance in case the
destination is already aligned, but GCC doesn't know about it.

-minline-all-stringops
By default GCC inlines string operations only when the destination is known to be aligned to least a 4-byte boundary. This enables
more inlining and increases code size, but may improve performance of code that depends on fast "memcpy", "strlen", and "memset" for
short lengths.

-minline-stringops-dynamically
For string operations of unknown size, use run-time checks with inline code for small blocks and a library call for large blocks.

-mstringop-strategy=alg
Override the internal decision heuristic for the particular algorithm to use for inlining string operations. The allowed values for
alg are:

rep_byte
rep_4byte
rep_8byte
Expand using i386 "rep" prefix of the specified size.

byte_loop
loop
unrolled_loop
Expand into an inline loop.

libcall
Always use a library call.

-mmemcpy-strategy=strategy
Override the internal decision heuristic to decide if "__builtin_memcpy" should be inlined and what inline algorithm to use when the
expected size of the copy operation is known. strategy is a comma-separated list of alg:max_size:dest_align triplets. alg is specified
in -mstringop-strategy, max_size specifies the max byte size with which inline algorithm alg is allowed. For the last triplet, the
max_size must be "-1". The max_size of the triplets in the list must be specified in increasing order. The minimal byte size for alg
is 0 for the first triplet and "max_size + 1" of the preceding range.

-mmemset-strategy=strategy
The option is similar to -mmemcpy-strategy= except that it is to control "__builtin_memset" expansion.

-momit-leaf-frame-pointer
Don't keep the frame pointer in a register for leaf functions. This avoids the instructions to save, set up, and restore frame
pointers and makes an extra register available in leaf functions. The option -fomit-leaf-frame-pointer removes the frame pointer for
leaf functions, which might make debugging harder.

-mtls-direct-seg-refs
-mno-tls-direct-seg-refs
Controls whether TLS variables may be accessed with offsets from the TLS segment register (%gs for 32-bit, %fs for 64-bit), or whether
the thread base pointer must be added. Whether or not this is valid depends on the operating system, and whether it maps the segment
to cover the entire TLS area.

For systems that use the GNU C Library, the default is on.

-msse2avx
-mno-sse2avx
Specify that the assembler should encode SSE instructions with VEX prefix. The option -mavx turns this on by default.

-mfentry
-mno-fentry
If profiling is active (-pg), put the profiling counter call before the prologue. Note: On x86 architectures the attribute
"ms_hook_prologue" isn't possible at the moment for -mfentry and -pg.

-mrecord-mcount
-mno-record-mcount
If profiling is active (-pg), generate a __mcount_loc section that contains pointers to each profiling call. This is useful for
automatically patching and out calls.

-mnop-mcount
-mno-nop-mcount
If profiling is active (-pg), generate the calls to the profiling functions as NOPs. This is useful when they should be patched in
later dynamically. This is likely only useful together with -mrecord-mcount.

-mskip-rax-setup
-mno-skip-rax-setup
When generating code for the x86-64 architecture with SSE extensions disabled, -mskip-rax-setup can be used to skip setting up RAX
register when there are no variable arguments passed in vector registers.

Warning: Since RAX register is used to avoid unnecessarily saving vector registers on stack when passing variable arguments, the
impacts of this option are callees may waste some stack space, misbehave or jump to a random location. GCC 4.4 or newer don't have
those issues, regardless the RAX register value.

-m8bit-idiv
-mno-8bit-idiv
On some processors, like Intel Atom, 8-bit unsigned integer divide is much faster than 32-bit/64-bit integer divide. This option
generates a run-time check. If both dividend and divisor are within range of 0 to 255, 8-bit unsigned integer divide is used instead
of 32-bit/64-bit integer divide.

-mavx256-split-unaligned-load
-mavx256-split-unaligned-store
Split 32-byte AVX unaligned load and store.

-mstack-protector-guard=guard
Generate stack protection code using canary at guard. Supported locations are global for global canary or tls for per-thread canary in
the TLS block (the default). This option has effect only when -fstack-protector or -fstack-protector-all is specified.

-mmitigate-rop
Try to avoid generating code sequences that contain unintended return opcodes, to mitigate against certain forms of attack. At the
moment, this option is limited in what it can do and should not be relied on to provide serious protection.

-mgeneral-regs-only
Generate code that uses only the general-purpose registers. This prevents the compiler from using floating-point, vector, mask and
bound registers.

-mindirect-branch=choice
Convert indirect call and jump with choice. The default is keep, which keeps indirect call and jump unmodified. thunk converts
indirect call and jump to call and return thunk. thunk-inline converts indirect call and jump to inlined call and return thunk.
thunk-extern converts indirect call and jump to external call and return thunk provided in a separate object file. You can control
this behavior for a specific function by using the function attribute "indirect_branch".

Note that -mcmodel=large is incompatible with -mindirect-branch=thunk nor -mindirect-branch=thunk-extern since the thunk function may
not be reachable in large code model.

-mfunction-return=choice
Convert function return with choice. The default is keep, which keeps function return unmodified. thunk converts function return to
call and return thunk. thunk-inline converts function return to inlined call and return thunk. thunk-extern converts function return
to external call and return thunk provided in a separate object file. You can control this behavior for a specific function by using
the function attribute "function_return".

Note that -mcmodel=large is incompatible with -mfunction-return=thunk nor -mfunction-return=thunk-extern since the thunk function may
not be reachable in large code model.

-mindirect-branch-register
Force indirect call and jump via register.

These -m switches are supported in addition to the above on x86-64 processors in 64-bit environments.

-m32
-m64
-mx32
-m16
-miamcu
Generate code for a 16-bit, 32-bit or 64-bit environment. The -m32 option sets "int", "long", and pointer types to 32 bits, and
generates code that runs on any i386 system.

The -m64 option sets "int" to 32 bits and "long" and pointer types to 64 bits, and generates code for the x86-64 architecture. For
Darwin only the -m64 option also turns off the -fno-pic and -mdynamic-no-pic options.

The -mx32 option sets "int", "long", and pointer types to 32 bits, and generates code for the x86-64 architecture.

The -m16 option is the same as -m32, except for that it outputs the ".code16gcc" assembly directive at the beginning of the assembly
output so that the binary can run in 16-bit mode.

The -miamcu option generates code which conforms to Intel MCU psABI. It requires the -m32 option to be turned on.

-mno-red-zone
Do not use a so-called "red zone" for x86-64 code. The red zone is mandated by the x86-64 ABI; it is a 128-byte area beyond the
location of the stack pointer that is not modified by signal or interrupt handlers and therefore can be used for temporary data without
adjusting the stack pointer. The flag -mno-red-zone disables this red zone.

-mcmodel=small
Generate code for the small code model: the program and its symbols must be linked in the lower 2 GB of the address space. Pointers
are 64 bits. Programs can be statically or dynamically linked. This is the default code model.

-mcmodel=kernel
Generate code for the kernel code model. The kernel runs in the negative 2 GB of the address space. This model has to be used for
Linux kernel code.

-mcmodel=medium
Generate code for the medium model: the program is linked in the lower 2 GB of the address space. Small symbols are also placed there.
Symbols with sizes larger than -mlarge-data-threshold are put into large data or BSS sections and can be located above 2GB. Programs
can be statically or dynamically linked.

-mcmodel=large
Generate code for the large model. This model makes no assumptions about addresses and sizes of sections.

-maddress-mode=long
Generate code for long address mode. This is only supported for 64-bit and x32 environments. It is the default address mode for
64-bit environments.

-maddress-mode=short
Generate code for short address mode. This is only supported for 32-bit and x32 environments. It is the default address mode for
32-bit and x32 environments.

x86 Windows Options

These additional options are available for Microsoft Windows targets:

-mconsole
This option specifies that a console application is to be generated, by instructing the linker to set the PE header subsystem type
required for console applications. This option is available for Cygwin and MinGW targets and is enabled by default on those targets.

-mdll
This option is available for Cygwin and MinGW targets. It specifies that a DLL---a dynamic link library---is to be generated, enabling
the selection of the required runtime startup object and entry point.

-mnop-fun-dllimport
This option is available for Cygwin and MinGW targets. It specifies that the "dllimport" attribute should be ignored.

-mthread
This option is available for MinGW targets. It specifies that MinGW-specific thread support is to be used.

-municode
This option is available for MinGW-w64 targets. It causes the "UNICODE" preprocessor macro to be predefined, and chooses Unicode-
capable runtime startup code.

-mwin32
This option is available for Cygwin and MinGW targets. It specifies that the typical Microsoft Windows predefined macros are to be set
in the pre-processor, but does not influence the choice of runtime library/startup code.

-mwindows
This option is available for Cygwin and MinGW targets. It specifies that a GUI application is to be generated by instructing the
linker to set the PE header subsystem type appropriately.

-fno-set-stack-executable
This option is available for MinGW targets. It specifies that the executable flag for the stack used by nested functions isn't set.
This is necessary for binaries running in kernel mode of Microsoft Windows, as there the User32 API, which is used to set executable
privileges, isn't available.

-fwritable-relocated-rdata
This option is available for MinGW and Cygwin targets. It specifies that relocated-data in read-only section is put into the ".data"
section. This is a necessary for older runtimes not supporting modification of ".rdata" sections for pseudo-relocation.

-mpe-aligned-commons
This option is available for Cygwin and MinGW targets. It specifies that the GNU extension to the PE file format that permits the
correct alignment of COMMON variables should be used when generating code. It is enabled by default if GCC detects that the target
assembler found during configuration supports the feature.

See also under x86 Options for standard options.

Xstormy16 Options

These options are defined for Xstormy16:

-msim
Choose startup files and linker script suitable for the simulator.

Xtensa Options

These options are supported for Xtensa targets:

-mconst16
-mno-const16
Enable or disable use of "CONST16" instructions for loading constant values. The "CONST16" instruction is currently not a standard
option from Tensilica. When enabled, "CONST16" instructions are always used in place of the standard "L32R" instructions. The use of
"CONST16" is enabled by default only if the "L32R" instruction is not available.

-mfused-madd
-mno-fused-madd
Enable or disable use of fused multiply/add and multiply/subtract instructions in the floating-point option. This has no effect if the
floating-point option is not also enabled. Disabling fused multiply/add and multiply/subtract instructions forces the compiler to use
separate instructions for the multiply and add/subtract operations. This may be desirable in some cases where strict IEEE
754-compliant results are required: the fused multiply add/subtract instructions do not round the intermediate result, thereby
producing results with more bits of precision than specified by the IEEE standard. Disabling fused multiply add/subtract instructions
also ensures that the program output is not sensitive to the compiler's ability to combine multiply and add/subtract operations.

-mserialize-volatile
-mno-serialize-volatile
When this option is enabled, GCC inserts "MEMW" instructions before "volatile" memory references to guarantee sequential consistency.
The default is -mserialize-volatile. Use -mno-serialize-volatile to omit the "MEMW" instructions.

-mforce-no-pic
For targets, like GNU/Linux, where all user-mode Xtensa code must be position-independent code (PIC), this option disables PIC for
compiling kernel code.

-mtext-section-literals
-mno-text-section-literals
These options control the treatment of literal pools. The default is -mno-text-section-literals, which places literals in a separate
section in the output file. This allows the literal pool to be placed in a data RAM/ROM, and it also allows the linker to combine
literal pools from separate object files to remove redundant literals and improve code size. With -mtext-section-literals, the
literals are interspersed in the text section in order to keep them as close as possible to their references. This may be necessary
for large assembly files. Literals for each function are placed right before that function.

-mauto-litpools
-mno-auto-litpools
These options control the treatment of literal pools. The default is -mno-auto-litpools, which places literals in a separate section
in the output file unless -mtext-section-literals is used. With -mauto-litpools the literals are interspersed in the text section by
the assembler. Compiler does not produce explicit ".literal" directives and loads literals into registers with "MOVI" instructions
instead of "L32R" to let the assembler do relaxation and place literals as necessary. This option allows assembler to create several
literal pools per function and assemble very big functions, which may not be possible with -mtext-section-literals.

-mtarget-align
-mno-target-align
When this option is enabled, GCC instructs the assembler to automatically align instructions to reduce branch penalties at the expense
of some code density. The assembler attempts to widen density instructions to align branch targets and the instructions following call
instructions. If there are not enough preceding safe density instructions to align a target, no widening is performed. The default is
-mtarget-align. These options do not affect the treatment of auto-aligned instructions like "LOOP", which the assembler always aligns,
either by widening density instructions or by inserting NOP instructions.

-mlongcalls
-mno-longcalls
When this option is enabled, GCC instructs the assembler to translate direct calls to indirect calls unless it can determine that the
target of a direct call is in the range allowed by the call instruction. This translation typically occurs for calls to functions in
other source files. Specifically, the assembler translates a direct "CALL" instruction into an "L32R" followed by a "CALLX"
instruction. The default is -mno-longcalls. This option should be used in programs where the call target can potentially be out of
range. This option is implemented in the assembler, not the compiler, so the assembly code generated by GCC still shows direct call
instructions---look at the disassembled object code to see the actual instructions. Note that the assembler uses an indirect call for
every cross-file call, not just those that really are out of range.

zSeries Options

These are listed under

ENVIRONMENT
This section describes several environment variables that affect how GCC operates. Some of them work by specifying directories or prefixes
to use when searching for various kinds of files. Some are used to specify other aspects of the compilation environment.

Note that you can also specify places to search using options such as -B, -I and -L. These take precedence over places specified using
environment variables, which in turn take precedence over those specified by the configuration of GCC.

LANG
LC_CTYPE
LC_MESSAGES
LC_ALL
These environment variables control the way that GCC uses localization information which allows GCC to work with different national
conventions. GCC inspects the locale categories LC_CTYPE and LC_MESSAGES if it has been configured to do so. These locale categories
can be set to any value supported by your installation. A typical value is en_GB.UTF-8 for English in the United Kingdom encoded in
UTF-8.

The LC_CTYPE environment variable specifies character classification. GCC uses it to determine the character boundaries in a string;
this is needed for some multibyte encodings that contain quote and escape characters that are otherwise interpreted as a string end or
escape.

The LC_MESSAGES environment variable specifies the language to use in diagnostic messages.

If the LC_ALL environment variable is set, it overrides the value of LC_CTYPE and LC_MESSAGES; otherwise, LC_CTYPE and LC_MESSAGES
default to the value of the LANG environment variable. If none of these variables are set, GCC defaults to traditional C English
behavior.

TMPDIR
If TMPDIR is set, it specifies the directory to use for temporary files. GCC uses temporary files to hold the output of one stage of
compilation which is to be used as input to the next stage: for example, the output of the preprocessor, which is the input to the
compiler proper.

GCC_COMPARE_DEBUG
Setting GCC_COMPARE_DEBUG is nearly equivalent to passing -fcompare-debug to the compiler driver. See the documentation of this option
for more details.

GCC_EXEC_PREFIX
If GCC_EXEC_PREFIX is set, it specifies a prefix to use in the names of the subprograms executed by the compiler. No slash is added
when this prefix is combined with the name of a subprogram, but you can specify a prefix that ends with a slash if you wish.

If GCC_EXEC_PREFIX is not set, GCC attempts to figure out an appropriate prefix to use based on the pathname it is invoked with.

If GCC cannot find the subprogram using the specified prefix, it tries looking in the usual places for the subprogram.

The default value of GCC_EXEC_PREFIX is prefix/lib/gcc/ where prefix is the prefix to the installed compiler. In many cases prefix is
the value of "prefix" when you ran the configure script.

Other prefixes specified with -B take precedence over this prefix.

This prefix is also used for finding files such as crt0.o that are used for linking.

In addition, the prefix is used in an unusual way in finding the directories to search for header files. For each of the standard
directories whose name normally begins with /usr/local/lib/gcc (more precisely, with the value of GCC_INCLUDE_DIR), GCC tries replacing
that beginning with the specified prefix to produce an alternate directory name. Thus, with -Bfoo/, GCC searches foo/bar just before
it searches the standard directory /usr/local/lib/bar. If a standard directory begins with the configured prefix then the value of
prefix is replaced by GCC_EXEC_PREFIX when looking for header files.

COMPILER_PATH
The value of COMPILER_PATH is a colon-separated list of directories, much like PATH. GCC tries the directories thus specified when
searching for subprograms, if it cannot find the subprograms using GCC_EXEC_PREFIX.

LIBRARY_PATH
The value of LIBRARY_PATH is a colon-separated list of directories, much like PATH. When configured as a native compiler, GCC tries
the directories thus specified when searching for special linker files, if it cannot find them using GCC_EXEC_PREFIX. Linking using
GCC also uses these directories when searching for ordinary libraries for the -l option (but directories specified with -L come first).

LANG
This variable is used to pass locale information to the compiler. One way in which this information is used is to determine the
character set to be used when character literals, string literals and comments are parsed in C and C++. When the compiler is
configured to allow multibyte characters, the following values for LANG are recognized:

C-JIS
Recognize JIS characters.

C-SJIS
Recognize SJIS characters.

C-EUCJP
Recognize EUCJP characters.

If LANG is not defined, or if it has some other value, then the compiler uses "mblen" and "mbtowc" as defined by the default locale to
recognize and translate multibyte characters.

Some additional environment variables affect the behavior of the preprocessor.

CPATH
C_INCLUDE_PATH
CPLUS_INCLUDE_PATH
OBJC_INCLUDE_PATH
Each variable's value is a list of directories separated by a special character, much like PATH, in which to look for header files.
The special character, "PATH_SEPARATOR", is target-dependent and determined at GCC build time. For Microsoft Windows-based targets it
is a semicolon, and for almost all other targets it is a colon.

CPATH specifies a list of directories to be searched as if specified with -I, but after any paths given with -I options on the command
line. This environment variable is used regardless of which language is being preprocessed.

The remaining environment variables apply only when preprocessing the particular language indicated. Each specifies a list of
directories to be searched as if specified with -isystem, but after any paths given with -isystem options on the command line.

In all these variables, an empty element instructs the compiler to search its current working directory. Empty elements can appear at
the beginning or end of a path. For instance, if the value of CPATH is ":/special/include", that has the same effect as
-I. -I/special/include.

DEPENDENCIES_OUTPUT
If this variable is set, its value specifies how to output dependencies for Make based on the non-system header files processed by the
compiler. System header files are ignored in the dependency output.

The value of DEPENDENCIES_OUTPUT can be just a file name, in which case the Make rules are written to that file, guessing the target
name from the source file name. Or the value can have the form file target, in which case the rules are written to file file using
target as the target name.

In other words, this environment variable is equivalent to combining the options -MM and -MF, with an optional -MT switch too.

SUNPRO_DEPENDENCIES
This variable is the same as DEPENDENCIES_OUTPUT (see above), except that system header files are not ignored, so it implies -M rather
than -MM. However, the dependence on the main input file is omitted.

SOURCE_DATE_EPOCH
If this variable is set, its value specifies a UNIX timestamp to be used in replacement of the current date and time in the "__DATE__"
and "__TIME__" macros, so that the embedded timestamps become reproducible.

The value of SOURCE_DATE_EPOCH must be a UNIX timestamp, defined as the number of seconds (excluding leap seconds) since 01 Jan 1970
00:00:00 represented in ASCII; identical to the output of @command{date +%s} on GNU/Linux and other systems that support the %s
extension in the "date" command.

The value should be a known timestamp such as the last modification time of the source or package and it should be set by the build
process.

BUGS
For instructions on reporting bugs, see <file:///usr/share/doc/gcc-7/README.Bugs>.

FOOTNOTES
1. On some systems, gcc -shared needs to build supplementary stub code for constructors to work. On multi-libbed systems, gcc -shared
must select the correct support libraries to link against. Failing to supply the correct flags may lead to subtle defects. Supplying
them in cases where they are not necessary is innocuous.

SEE ALSO
gpl(7), gfdl(7), fsf-funding(7), cpp(1), gcov(1), as(1), ld(1), gdb(1), adb(1), dbx(1), sdb(1) and the Info entries for gcc, cpp, as, ld,
binutils and gdb.

AUTHOR
See the Info entry for gcc, or <http://gcc.gnu.org/onlinedocs/gcc/Contributors.html>, for contributors to GCC.

Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or
any later version published by the Free Software Foundation; with the Invariant Sections being "GNU General Public License" and "Funding
Free Software", the Front-Cover texts being (a) (see below), and with the Back-Cover Texts being (b) (see below). A copy of the license is
included in the gfdl(7) man page.

(a) The FSF's Front-Cover Text is:

A GNU Manual

(b) The FSF's Back-Cover Text is:

You have freedom to copy and modify this GNU Manual, like GNU
software. Copies published by the Free Software Foundation raise
funds for GNU development.

gcc-7 2018-07-20 GCC(1)

bsd man page for gcc