GLTEXPARAMETER(3G) GLTEXPARAMETER(3G)
NAME
glTexParameterf, glTexParameteri, glTexParameterfv, glTexParameteriv - set texture parameters
C SPECIFICATION
void glTexParameterf( GLenum target,
GLenum pname,
GLfloat param )
void glTexParameteri( GLenum target,
GLenum pname,
GLint param )
PARAMETERS
target Specifies the target texture, which must be either GL_TEXTURE_1D, GL_TEXTURE_2D, or GL_TEXTURE_3D.
pname Specifies the symbolic name of a single-valued texture parameter. pname can be one of the following: GL_TEXTURE_MIN_FILTER,
GL_TEXTURE_MAG_FILTER, GL_TEXTURE_MIN_LOD, GL_TEXTURE_MAX_LOD, GL_TEXTURE_BASE_LEVEL, GL_TEXTURE_MAX_LEVEL, GL_TEXTURE_WRAP_S,
GL_TEXTURE_WRAP_T, GL_TEXTURE_WRAP_R, or GL_TEXTURE_PRIORITY.
param Specifies the value of pname.
C SPECIFICATION
void glTexParameterfv( GLenum target,
GLenum pname,
const GLfloat *params )
void glTexParameteriv( GLenum target,
GLenum pname,
const GLint *params )
PARAMETERS
target Specifies the target texture, which must be either GL_TEXTURE_1D, GL_TEXTURE_2D or GL_TEXTURE_3D.
pname Specifies the symbolic name of a texture parameter. pname can be one of the following: GL_TEXTURE_MIN_FILTER,
GL_TEXTURE_MAG_FILTER, GL_TEXTURE_MIN_LOD, GL_TEXTURE_MAX_LOD, GL_TEXTURE_BASE_LEVEL, GL_TEXTURE_MAX_LEVEL, GL_TEXTURE_WRAP_S,
GL_TEXTURE_WRAP_T, GL_TEXTURE_WRAP_R, GL_TEXTURE_BORDER_COLOR, or GL_TEXTURE_PRIORITY.
params Specifies a pointer to an array where the value or values of pname are stored.
DESCRIPTION
Texture mapping is a technique that applies an image onto an object's surface as if the image were a decal or cellophane shrink-wrap. The
image is created in texture space, with an (s, t) coordinate system. A texture is a one- or two-dimensional image and a set of parameters
that determine how samples are derived from the image.
glTexParameter assigns the value or values in params to the texture parameter specified as pname. target defines the target texture,
either GL_TEXTURE_1D, GL_TEXTURE_2D, or GL_TEXTURE_3D. The following symbols are accepted in pname:
GL_TEXTURE_MIN_FILTER
The texture minifying function is used whenever the pixel being textured maps to an area greater than one texture element. There
are six defined minifying functions. Two of them use the nearest one or nearest four texture elements to compute the texture
value. The other four use mipmaps.
A mipmap is an ordered set of arrays representing the same image at progressively lower resolutions. If the texture has dimen-
sions 2nx2m, there are max(n,m)+1 mipmaps. The first mipmap is the original texture, with dimensions 2nx2m. Each subsequent
mipmap has dimensions 2k-1x2l-1, where 2kx2l are the dimensions of the previous mipmap, until either k=0 or l=0. At that point,
subsequent mipmaps have dimension 1x2l-1 or 2k-1x1 until the final mipmap, which has dimension 1x1. To define the mipmaps, call
glTexImage1D, glTexImage2D, glTexImage3D, glCopyTexImage1D, or glCopyTexImage2D with the level argument indicating the order of
the mipmaps. Level 0 is the original texture; level max(n,m) is the final 1x1 mipmap.
params supplies a function for minifying the texture as one of the following:
GL_NEAREST
Returns the value of the texture element that is nearest (in Manhattan distance) to the center of the pixel being tex-
tured.
GL_LINEAR Returns the weighted average of the four texture elements that are closest to the center of the pixel being textured.
These can include border texture elements, depending on the values of GL_TEXTURE_WRAP_S and GL_TEXTURE_WRAP_T, and on
the exact mapping.
GL_NEAREST_MIPMAP_NEAREST
Chooses the mipmap that most closely matches the size of the pixel being textured and uses the GL_NEAREST criterion
(the texture element nearest to the center of the pixel) to produce a texture value.
GL_LINEAR_MIPMAP_NEAREST
Chooses the mipmap that most closely matches the size of the pixel being textured and uses the GL_LINEAR criterion (a
weighted average of the four texture elements that are closest to the center of the pixel) to produce a texture value.
GL_NEAREST_MIPMAP_LINEAR
Chooses the two mipmaps that most closely match the size of the pixel being textured and uses the GL_NEAREST criterion
(the texture element nearest to the center of the pixel) to produce a texture value from each mipmap. The final tex-
ture value is a weighted average of those two values.
GL_LINEAR_MIPMAP_LINEAR
Chooses the two mipmaps that most closely match the size of the pixel being textured and uses the GL_LINEAR criterion
(a weighted average of the four texture elements that are closest to the center of the pixel) to produce a texture
value from each mipmap. The final texture value is a weighted average of those two values.
As more texture elements are sampled in the minification process, fewer aliasing artifacts will be apparent. While the
GL_NEAREST and GL_LINEAR minification functions can be faster than the other four, they sample only one or four texture elements
to determine the texture value of the pixel being rendered and can produce moire patterns or ragged transitions. The initial
value of GL_TEXTURE_MIN_FILTER is GL_NEAREST_MIPMAP_LINEAR.
GL_TEXTURE_MAG_FILTER
The texture magnification function is used when the pixel being textured maps to an area less than or equal to one texture ele-
ment. It sets the texture magnification function to either GL_NEAREST or GL_LINEAR (see below). GL_NEAREST is generally faster
than GL_LINEAR, but it can produce textured images with sharper edges because the transition between texture elements is not as
smooth. The initial value of GL_TEXTURE_MAG_FILTER is GL_LINEAR.
GL_NEAREST
Returns the value of the texture element that is nearest (in Manhattan distance) to the center of the pixel being tex-
tured.
GL_LINEAR Returns the weighted average of the four texture elements that are closest to the center of the pixel being textured.
These can include border texture elements, depending on the values of GL_TEXTURE_WRAP_S and GL_TEXTURE_WRAP_T, and on
the exact mapping.
GL_TEXTURE_MIN_LOD
Sets the minimum level-of-detail parameter. This floating-point value limits the selection of highest resolution mipmap (lowest
mipmap level). The initial value is -1000.
GL_TEXTURE_MAX_LOD
Sets the maximum level-of-detail parameter. This floating-point value limits the selection of the lowest resolution mipmap
(highest mipmap level). The initial value is 1000.
GL_TEXTURE_BASE_LEVEL
Specifies the index of the lowest defined mipmap level. This is an integer value. The initial value is 0.
GL_TEXTURE_MAX_LEVEL
Sets the index of the highest defined mipmap level. This is an integer value. The initial value is 1000.
GL_TEXTURE_WRAP_S
Sets the wrap parameter for texture coordinate s to either GL_CLAMP, GL_CLAMP_TO_EDGE, or GL_REPEAT. GL_CLAMP causes s coordi-
nates to be clamped to the range [0,1] and is useful for preventing wrapping artifacts when mapping a single image onto an
object. GL_CLAMP_TO_EDGE causes s coordinates to be clamped to the range [__,1-__], where N is the size of the texture in the
direction of clamping. GL_REPEAT causes the integer part of the s coordinate to be ignored; the GL uses only the fractional
part, thereby creating a repeating pattern. Border texture elements are accessed only if wrapping is set to GL_CLAMP. Ini-
tially, GL_TEXTURE_WRAP_S is set to GL_REPEAT.
GL_TEXTURE_WRAP_T
Sets the wrap parameter for texture coordinate t to either GL_CLAMP, GL_CLAMP_TO_EDGE, or GL_REPEAT. See the discussion under
GL_TEXTURE_WRAP_S. Initially, GL_TEXTURE_WRAP_T is set to GL_REPEAT.
GL_TEXTURE_WRAP_R
Sets the wrap parameter for texture coordinate r to either GL_CLAMP, GL_CLAMP_TO_EDGE, or GL_REPEAT. See the discussion under
GL_TEXTURE_WRAP_S. Initially, GL_TEXTURE_WRAP_R is set to GL_REPEAT.
GL_TEXTURE_BORDER_COLOR
Sets a border color. params contains four values that comprise the RGBA color of the texture border. Integer color components
are interpreted linearly such that the most positive integer maps to 1.0, and the most negative integer maps to -1.0. The values
are clamped to the range [0,1] when they are specified. Initially, the border color is (0, 0, 0, 0).
GL_TEXTURE_PRIORITY
Specifies the texture residence priority of the currently bound texture. Permissible values are in the range [0, 1]. See
glPrioritizeTextures and glBindTexture for more information.
NOTES
GL_TEXTURE_3D, GL_TEXTURE_MIN_LOD, GL_TEXTURE_MAX_LOD, GL_TEXTURE_BASE_LEVEL, and GL_TEXTURE_MAX_LEVEL are only available if the GL version
is 1.2 or greater.
Suppose that a program has enabled texturing (by calling glEnable with argument GL_TEXTURE_1D, GL_TEXTURE_2D, or GL_TEXTURE_3D) and has set
GL_TEXTURE_MIN_FILTER to one of the functions that requires a mipmap. If either the dimensions of the texture images currently defined
(with previous calls to glTexImage1D, glTexImage2D, glTexImage3D, glCopyTexImage1D, or glCopyTexImage2D) do not follow the proper sequence
for mipmaps (described above), or there are fewer texture images defined than are needed, or the set of texture images have differing num-
bers of texture components, then it is as if texture mapping were disabled.
Linear filtering accesses the four nearest texture elements only in 2D textures. In 1D textures, linear filtering accesses the two nearest
texture elements.
When the GL_ARB_multitexture extension is supported, glTexParameter specifies the texture parameters for the active texture unit, specified
by calling glActiveTextureARB.
ERRORS
GL_INVALID_ENUM is generated if target or pname is not one of the accepted defined values.
GL_INVALID_ENUM is generated if params should have a defined constant value (based on the value of pname) and does not.
GL_INVALID_OPERATION is generated if glTexParameter is executed between the execution of glBegin and the corresponding execution of glEnd.
ASSOCIATED GETS
glGetTexParameter
glGetTexLevelParameter
SEE ALSO
glActiveTextureARB(3G), glBindTexture(3G), glCopyPixels(3G), glCopyTexImage1D(3G), glCopyTexImage2D(3G), glCopyTexSubImage1D(3G),
glCopyTexSubImage2D(3G), glCopyTexSubImage3D(3G), glDrawPixels(3G), glPixelStore(3G), glPixelTransfer(3G), glPrioritizeTextures(3G),
glTexEnv(3G), glTexGen(3G), glTexImage1D(3G), glTexImage2D(3G), glTexImage3D(3G), glTexSubImage1D(3G), glTexSubImage2D(3G),
glTexSubImage3D(3G)
GLTEXPARAMETER(3G)