uumonitor(8c) [ultrix man page]

uumonitor(8c)															     uumonitor(8c)

Name
       uumonitor - monitor the UUCP system

Syntax
       uumonitor

Description
       The command displays a synopsis in tabular format of the current UUCP status.  The format of each line is as follows:

       system_name #C #X most_recent_status CNT:# time

       In the format of this line,

       system_name    is the remote system for which the entry applies.

       #C	      is the number of C.files queued for the remote system.

       #X	      is the number of requests for remote execution from the remote system.

       most_recent_status
		      is the result of the most recent attempt to connect to the remote system.

       CNT:#	      is  the number of times that a failure to log in to the remote system has occurred.  This does NOT include the number failed
		      dial attempts.

       time	      is the time of the last status entry was made for this system.

       The command is helpful for detecting systems that have backlogs, that have gone away for awhile, that have changed phone  numbers,  and	so
       forth.	The  CNT:  field  is useful for detecting a system whose login/passwd has changed.  If the CNT: field gets larger than the maximum
       allowable failures (currently 20), no further attempts to connect to this system are made.  If the number of C.files queued starts  getting
       unusually large (depending on the system anywhere from 100-1000), action should be taken to determine the cause of the backlog.

See Also
       uucp(1c)

																     uumonitor(8c)

uutry(1)						      General Commands Manual							  uutry(1)

NAME

       uutry - Tries to contact remote system with debugging on

SYNOPSIS

       uutry [system]

DESCRIPTION

       The uutry command is a shell that invokes uucico to call a remote site, system.	Debugging is turned on (level 9).  The debugging output is
       put into the file /tmp/system.  A tail -f on this file is executed so that the debugging output is printed on the  terminal  during  execu-
       tion.   Typing the Interrupt key sequence gives control back to the terminal while uucico continues to run, putting its output in /tmp/sys-
       tem.

       The uutry command overrides any retry period for a remote system and will attempt to establish a connection immediately.

       The output file, /tmp/system is overwritten each time uutry is executed to system.

FILES

       On a given system, this file contains a list of remote sites accessible through the UUCP protocol.  The	primary  security  file  for  uucp
       which specifies access permissions for remote systems.  Contains information about devices on the local system that can establish a connec-
       tion to a remote computer using the uucp program.  The spool directory where uucp maintains its temporary work files.  Contains lock  files
       that prevent multiple uses of devices and multiple calls to systems.  Called the public directory on a given system, UUCP uses it for send-
       ing and receiving information; ~uucp is a brief way of specifying it.  A file created by uutry to contain traces generated by uucico  while
       connecting to system, system.

SEE ALSO

       Commands:  uucico(8)

																	  uutry(1)