systemd-machine-id-commit.service(8) [ultrix man page]
SYSTEMD-MACHINE-ID-COMMIT.SERVICE(8) systemd-machine-id-commit.service SYSTEMD-MACHINE-ID-COMMIT.SERVICE(8)NAME
systemd-machine-id-commit.service - Commit a transient machine ID to disk
SYNOPSIS
systemd-machine-id-commit.service
DESCRIPTION
systemd-machine-id-commit.service is an early boot service responsible for committing transient /etc/machine-id files to a writable disk
file system. See machine-id(5) for more information about machine IDs.
This service is started after local-fs.target in case /etc/machine-id is a mount point of its own (usually from a memory file system such
as "tmpfs") and /etc is writable. The service will invoke systemd-machine-id-setup --commit, which writes the current transient machine ID
to disk and unmount the /etc/machine-id file in a race-free manner to ensure that file is always valid and accessible for other processes.
See systemd-machine-id-setup(1) for details.
The main use case of this service are systems where /etc/machine-id is read-only and initially not initialized. In this case, the system
manager will generate a transient machine ID file on a memory file system, and mount it over /etc/machine-id, during the early boot phase.
This service is then invoked in a later boot phase, as soon as /etc has been remounted writable and the ID may thus be committed to disk to
make it permanent.
SEE ALSO systemd(1), systemd-machine-id-setup(1), machine-id(5), systemd-firstboot(1)systemd 237 SYSTEMD-MACHINE-ID-COMMIT.SERVICE(8)
Check Out this Related Man Page
SYSTEMD-MACHINE-ID-COMMIT.SERVICE(8) systemd-machine-id-commit.service SYSTEMD-MACHINE-ID-COMMIT.SERVICE(8)NAME
systemd-machine-id-commit.service - Commit a transient machine ID to disk
SYNOPSIS
systemd-machine-id-commit.service
DESCRIPTION
systemd-machine-id-commit.service is an early boot service responsible for committing transient /etc/machine-id files to a writable disk
file system. See machine-id(5) for more information about machine IDs.
This service is started after local-fs.target in case /etc/machine-id is a mount point of its own (usually from a memory file system such
as "tmpfs") and /etc is writable. The service will invoke systemd-machine-id-setup --commit, which writes the current transient machine ID
to disk and unmount the /etc/machine-id file in a race-free manner to ensure that file is always valid and accessible for other processes.
See systemd-machine-id-setup(1) for details.
The main use case of this service are systems where /etc/machine-id is read-only and initially not initialized. In this case, the system
manager will generate a transient machine ID file on a memory file system, and mount it over /etc/machine-id, during the early boot phase.
This service is then invoked in a later boot phase, as soon as /etc has been remounted writable and the ID may thus be committed to disk to
make it permanent.
SEE ALSO systemd(1), systemd-machine-id-setup(1), machine-id(5), systemd-firstboot(1)systemd 237SYSTEMD-MACHINE-ID-COMMIT.SERVICE(8)
Is there any API call to get IP Address of a machine? I know there is function which returns name of the machine, gethostname(). But I need the IP.
Thanks & Regards,
Ahsan (7 Replies)
Hi I am using unix for last few days. Here is my problem
during boot the machine stop giving video signal and I don't know what's happening.
When I ping (during boot) it from another machine it comes alive then goes out.
The power on the CPU is on all the time.
please help. (9 Replies)
Hello folks,
I've got a problem I've found to be quite difficult to solve. Recently I bought an old UNIX machine from the late eighties, a DIAB1100 with a Motorola 68K processor. I've used Linux for a while now, so I know the basics of that OS and thought it would be interesting to see a real... (8 Replies)
My machine has 2 hard disks. I have installed Solaris 10 in disk0 of my machine. I used dd command to copy from one disk to the other disk. The disk capacity is 73GB.
I gave the following command:
dd if=/dev/rdsk/c1t0d0s2 of=/dev/rdsk/c1t2d0s2
I waited for four days but the process... (9 Replies)
Hi,
I need to intentianlly use up memory. :eek: We have a product fix that that resolves an issue that only arrises when the system is under extreme load.
We have a SunOS, 5.8 test machine but have not been able to run enough data through to replicate the original issue and test the patch.... (8 Replies)
Hi I am trying to bring up our Sun V100 machine remotely using hyper terminal. We have connected LOM port A to COM1 of our windows server and have lom promt available.
Now when we type poweron it starts booting and goes through the booting process and stops at the following step...
....
... (7 Replies)
Hello,
I have a requirement like -
I need to connect to specific Unix machine.That machine authenticates the user who is logging in. I am accessing from XP machine.
Is possible to supply the Username & Password along with Host name and port, from Windows command prompt? If so how? (13 Replies)
Hi all,
I logged in one machine. I want to find one file in other machine. However, I don't know exactly which and where the machine is. I used nmap command to search all available hosts in this network range. I got two available machines through this action. But I still can't find the file I want... (8 Replies)
I have a following string.
"machine=IFLMUD5HP0581&group1=Stop"
I have created 2 variables namely machine and action.
machine should contain
IFLMUD5HP0581
action should contain
Stop
How do i write a script for the same. (7 Replies)
Hello,
I need to move 5TB of data from DS8100 to DS3400 storage.This 5TB of data is spread across 5 file system and mounted on one AIX server.
Same file system structure is created on DS3400 storage and mounted on the same AIX server.
Can anyone provide the best way of moving data from... (16 Replies)
Hi Experts,
I want to copy a file from a Linux machine to another Linux machine or a windows machine shared drive.
I mean to say..
cp filename //hostname/shareddrive
I don't want to mount. Is there any way we can do it.
Regards
Naree (34 Replies)
we have a SUN M3000 server.
setup as only 1 domain.
disk c0t0d0 and c0t1d0 and setup as SVM mirrors.
a few days ago disk T1 failed.
new we have replaced the disk, but can's see the disk in format.
have done cfgadm and devfsadm.
still can't access the new disk in format.
the output... (6 Replies)
I am connecting a samsung smartphone (galaxy s3) to a freebsd machine. It does not automatically mount. When plugging this machine in, the following message appears:
ugen 7.2: <SAMSUNG> at usbus7
When disconnecting, the following message appears:
ugen 7.2: <SAMSUNG> at usbus7 (disconnected)... (13 Replies)
hi all,
i have made my machine a freeBSD machine instead of a centos machine and my script doesnt work anymore and i was wondering if anyone can help me into why, i thought the commands are the same, here it is -
#!/bin/bash
source=/vol/cha-work/_ARCHIVE/to_be_archived/audio... (9 Replies)