ATA_IS_40WIRE(9) libata Core Internals ATA_IS_40WIRE(9)NAME
ata_is_40wire - check drive side detection
SYNOPSIS
int ata_is_40wire(struct ata_device * dev);
ARGUMENTS
dev
device
DESCRIPTION
Perform drive side detection decoding, allowing for device vendors who can't follow the documentation.
AUTHOR
Jeff Garzik
Author.
COPYRIGHT Kernel Hackers Manual 2.6. July 2010 ATA_IS_40WIRE(9)
Check Out this Related Man Page
SD(4) Linux Programmer's Manual SD(4)NAME
sd - Driver for SCSI Disk Drives
SYNOPSIS
#include <linux/hdreg.h> /* for HDIO_GETGEO */ #include <linux/fs.h> /* for BLKGETSIZE and BLKRRPART */
CONFIG
The block device name has the following form: sdlp, where l is a letter denoting the physical drive, and p is a number denoting the parti-
tion on that physical drive. Often, the partition number, p, will be left off when the device corresponds to the whole drive.
SCSI disks have a major device number of 8, and a minor device number of the form (16 * drive_number) + partition_number, where drive_num-
ber is the number of the physical drive in order of detection, and partition_number is as follows:
partition 0 is the whole drive
partitions 1-4 are the DOS "primary" partitions
partitions 5-8 are the DOS "extended" (or "logical") partitions
For example, /dev/sda will have major 8, minor 0, and will refer to all of the first SCSI drive in the system; and /dev/sdb3 will have
major 8, minor 19, and will refer to the third DOS "primary" partition on the second SCSI drive in the system.
At this time, only block devices are provided. Raw devices have not yet been implemented.
DESCRIPTION
The following ioctls are provided:
HDIO_GETGEO
Returns the BIOS disk parameters in the following structure:
struct hd_geometry {
unsigned char heads;
unsigned char sectors;
unsigned short cylinders;
unsigned long start;
};
A pointer to this structure is passed as the ioctl(2) parameter.
The information returned in the parameter is the disk geometry of the drive as understood by DOS! This geometry is not the physical
geometry of the drive. It is used when constructing the drive's partition table, however, and is needed for convenient operation of
fdisk(1), efdisk(1), and lilo(1). If the geometry information is not available, zero will be returned for all of the parameters.
BLKGETSIZE
Returns the device size in sectors. The ioctl(2) parameter should be a pointer to a long.
BLKRRPART
Forces a re-read of the SCSI disk partition tables. No parameter is needed.
The scsi(4) ioctls are also supported. If the ioctl(2) parameter is required, and it is NULL, then ioctl() will return -EINVAL.
FILES
/dev/sd[a-h]: the whole device
/dev/sd[a-h][0-8]: individual block partitions
SEE ALSO scsi(4)
1992-12-17 SD(4)
Hi all,
I want to create a new user and grant him ONLY transfer files access to a specific directory where he can only upload and read the files. He should be restricted to this activity only.
Regards (6 Replies)
Hi everyone,
I know the following questions are noobish questions but I am asking them because I am confused about the basics of history behind UNIX and LINUX.
Ok onto business, my questions are-:
Was/Is UNIX ever an open source operating system ?
If UNIX was... (21 Replies)
Hi,
Last 2 weeks I have searched many forums and i haven't found the answer for the question:
How to get all command output to Putty title?
Needed it for other programs to know when some jobs on a server is done and is it done right or wrong. Plink stdout and stdin wasn't working, i used many... (1 Reply)
anyone have any idea how do to this with auth_attr?
I suspect if I grant him
solaris.device.:RO::Device Allocation::help=DevAllocHeader.html
that will work but I'm unsure. Just looking for a second opinion. (10 Replies)
I am looking for a stable, reliable system to replace my current Windows systems in the home. These are simple systems that I purchased from the local Big Box store.
I have heard many good things about Unix and it's various children and it sounds like a good option to me. I have worked... (2 Replies)
We have a lot of scripts using cut as :
cut -c 0-8 --works for cut (GNU coreutils) 5.97, but does not work for cut (GNU coreutils) 8.4.
Gives error -
cut: fields and positions are numbered from 1
Try `cut --help' for more information.
The position needs to start with 1 for later... (6 Replies)
I've got a problem with a proxy configuration. We have an LDAP group that lists all users who are authorised to use the proxy to FTP (usually Filezilla) out to the world, and by implication those not in the group should be denied. My users are delighted that this has been enabled and those that... (9 Replies)
hi folks,
how to using tar with exclude directory and compress it using tar.Z
i only know how to exclude dir only with this command below:
tar -cvf /varios/restore/test.tar -X excludefile.txt /jfma/test1/
how to compress it using 1 command?
Thanx
Please use CODE tags as... (6 Replies)
Hello All,
I had recently learnt a bit of Docker(which provides containerization process).
Here are some of my learning points from it.
Let us start first with very basic question:
What is Docker:
Docker is a platform for sysadmins and developers to DEPLOY, DEVELOP and RUN applications ... (7 Replies)
What is the point of this? Whenever I close my shell it appends to the history file without adding this. I have never seen it overwrite my history file.
# When the shell exits, append to the history file instead of overwriting it
shopt -s histappend (3 Replies)
Hello for all,
I am testing the behavior of a 32 bit application running on Solaris 5.10 (SPARC), and realize it reaches 4GB of memory and then crashes.
It doesn't matter the amount of used memory as application is intended to perform many transactions; rather, what I want to achieve is to... (2 Replies)