cnfsstat(8) [suse man page]
CNFSSTAT(8) InterNetNews Documentation CNFSSTAT(8) NAME
cnfsstat - Show usage of CNFS buffers SYNOPSIS
cnfsstat [-ahpPsv] [-c class] [-l [seconds]] [-m buffer] DESCRIPTION
cnfsstat reads pathetc/cycbuff.conf and pathetc/storage.conf to determine which CNFS buffers are available. It then reads the specified cyclic buffers and shows their usage status. cnfsstat can be invoked from rc.news if docnfsstat is set to true in inn.conf, and the result is written to syslog(3). OPTIONS
-a Besides its usual output, cnfsstat prints the age of the oldest article in the cycbuff. You may also want to use the -v flag to see extended consistency checks. -c class Only information for the specified class is printed. -h Print usage information and exit. -l [seconds] With this option, cnfsstat prints a status snapshot every seconds, and only exits if an error occurs. When unspecified, the default interval is 600 seconds. -m buffer Print information about the specified buffer in a format suitable for MRTG. -p Print an MRTG config file. -P Write PID into pathrun/cnfsstat.pid. -s Write output to syslog(3) instead of standard output. -v Write additional information, especially about consistency checks for article storage and the history file. HISTORY
Written by Katsuhiro Kondou <kondou@nec.co.jp> for InterNetNews. Converted to POD by Julien Elie. $Id: cnfsstat.pod 8576 2009-08-18 13:55:11Z iulius $ SEE ALSO
cycbuff.conf(5), history(5), inn.conf(5), rc.news(8), storage.conf(5). INN 2.5.2 2009-09-11 CNFSSTAT(8)
Check Out this Related Man Page
CYCBUFF.CONF(5) File Formats Manual CYCBUFF.CONF(5) NAME
cycbuff.conf - configuration file for CNFS method DESCRIPTION
The file <pathetc in inn.conf>/cycbuff.conf is required if CNFS (Cyclic News File System) method is used. CNFS is one of storage method which can be defined at storage.conf(5). The file consists of a series of lines; blank lines and lines beginning with a number sign (``#'') are ignored. There are four kinds of configuration lines: ``cycbuffupdate'', ``refreshinterval'', ``cycbuff'' and ``metacycbuff.'' The order of lines in this file is not important among the same kind of configuration line. But all ``cycbuff'' lines should be presented before any ``metacycbuff'' lines. ``Cycbuffupdate'' line is formatted as: cycbuffupdate:update ``Update'' is how many article-stores between cycbuff header updates. This line can be omitted and the default value is ``25.'' ``Refreshinterval'' line is formatted as: refreshinterval:interval ``Inerval'' is what interval (seconds) between rereading cycbuff header if cycbuff is preopend. (This is in the case nnrpd(8) runs as a daemon.) This line can be omitted and the default value is ``30.'' ``Cycbuff'' line is formatted as: cycbuff:buffer_name:file_name:buffer_size ``Buffer_name'' is the symbolic name of the buffer. The length of this name should be within 7 letters. This name is referred at ``meta- cycbuff'' lines. ``File_name'' is the path to buffer file. The length of this path should be within 63 letters. ``Buffer_size'' is the length of buffer file in kilobytes in decimal (1KB = 1024 bytes). If the ``file_name'' is not a special device, the file should be buf- fer_size * 1024 bytes. ``Metacycbuff'' line is formatted as: metacycbuff:meta_cyclic_buffer_name:buffer_names[:mode] ``Meta_cyclic_buffer_name'' is the symbolic name of meta-cyclic buffer. This name is referred at ``options'' field at ``cnfs'' entries in storage.conf(5). ``Buffer_names'' is comma separated list of symbolic names of ``cycbuff.'' These buffer names should be defined at ``cycbuff'' lines. If ``buffer_names'' has more than one buffer names, CNFS method stores articles into each ``cycbuff'' in order cycli- cally. ``Mode'' is the mode of storing article. Currently there are two mode; ``INTERLEAVE'' and ``SEQUENTIAL''. Mode ``INTERLEAVE'' is to store articles into each cycbuff in round robin way. Mode ``SEQUENTIAL'' is to store articles sequentially into one cycbuff until it is filled up. ``Mode'' is optional and the default value without this option is ``INTERLEAVE''. Also it is necessary to set up ``options'' field at ``cnfs'' entries in storage.conf(5) to use CNFS method. That field should be one of ``meta_cyclic_buffer_name'' defined at ``metacycbuff'' lines. To create new ``cycbuff'', there are two different methods for creating the cyclic buffer files. 1. Create a big file on top of a standard filesystem. The use "dd" to create the ``cycbuff'' files, such as "dd if=/dev/zero of=/path/to/cycbuff bs=32k count=N" where N is the buf- fer_size divided by 32. 2. Use block disk devices directly. If your operating system will allow you to mmap() block disk devices (Solaris does, FreeBSD does not), this is the recommended method. Partition the disks to make each partition slightly larger (a few MB larger) than the intended size of each cycbuff. It is not recommend to use the block device files already located in ``/dev.'' Instead, use "mknod" to create a new set of block device files. In order to do this, do an "ls -Ll" of the /dev/dsk partition. The major and minor device numbers are in the fifth and sixth columns (right before the date) respectively. This information should be fed to "mknod" to make a "block-type special file" (b). Here is a short script that accomplishes this when fed the ``/dev/dsk/'' partition name: #!/bin/sh disk=$1 link=`ls -l /dev/dsk/$disk | awk '{print $11}'` major=`ls -l /dev/dsk/$link | awk '{print $5}' | tr -d ,` minor=`ls -l /dev/dsk/$link | awk '{print $6}` mkdir /cycbuff mknod /cycbuff/$disk b $major $minor The created device files themselves consume very little space. In either case, make certain that each overview buffer file is owned by <USER specified with --with-news-user at configure>, <GROUP speci- fied with --with-news-group at configure>, and has read/write modes for the owner and group (mode ``0664'' or ``0660''). When you first start innd and everything is configured properly, you should see messages in news.notice which look like: Mar 1 00:00:00 kevlar innd: CNFS-sm No magic cookie found for cycbuff ONE, initializing HISTORY
Written by Katsuhiro Kondou <kondou@nec.co.jp> for InterNetNews. This is revision 1.13.2.1, dated 2000/08/17. SEE ALSO
inn.conf(5), storage.conf(5). CYCBUFF.CONF(5)