CIPTOOL(1)CIPTOOL(1)NAME
ciptool - Bluetooth Common ISDN Access Profile (CIP)
SYNOPSIS
ciptool [ options ] < command >
DESCRIPTION
ciptool is used to set up, maintain, and inspect the CIP configuration of the Bluetooth subsystem in the Linux kernel.
OPTIONS -h Gives a list of possible commands.
-i <hciX> | <bdaddr>
The command is applied to device hciX , which must be the name or the address of an installed Bluetooth device. If not specified,
the command will be use the first available Bluetooth device.
COMMANDS
show Display information about the connected devices.
search Search for Bluetooth devices and connect to first one that offers CIP support.
connect <bdaddr> [psm]
Connect the local device to the remote Bluetooth device on the specified PSM number. If no PSM is specified, it will use the SDP to
retrieve it from the remote device.
release [bdaddr]
Release a connection to the specific device. If no address is given and only one device is connected this will be released.
loopback <bdaddr> [psm]
Create a connection to the remote device for Bluetooth testing. This command will not provide a CAPI controller, because it is only
for testing the CAPI Message Transport Protocol.
AUTHOR
Written by Marcel Holtmann <marcel@holtmann.org>.
JUNE 6, 2003 CIPTOOL(1)
Check Out this Related Man Page
CIPTOOL(1)CIPTOOL(1)NAME
ciptool - Bluetooth Common ISDN Access Profile (CIP)
SYNOPSIS
ciptool [ options ] < command >
DESCRIPTION
ciptool is used to set up, maintain, and inspect the CIP configuration of the Bluetooth subsystem in the Linux kernel.
OPTIONS -h Gives a list of possible commands.
-i <hciX> | <bdaddr>
The command is applied to device hciX , which must be the name or the address of an installed Bluetooth device. If not specified,
the command will be use the first available Bluetooth device.
COMMANDS
show Display information about the connected devices.
search Search for Bluetooth devices and connect to first one that offers CIP support.
connect <bdaddr> [psm]
Connect the local device to the remote Bluetooth device on the specified PSM number. If no PSM is specified, it will use the SDP to
retrieve it from the remote device.
release [bdaddr]
Release a connection to the specific device. If no address is given and only one device is connected this will be released.
loopback <bdaddr> [psm]
Create a connection to the remote device for Bluetooth testing. This command will not provide a CAPI controller, because it is only
for testing the CAPI Message Transport Protocol.
AUTHOR
Written by Marcel Holtmann <marcel@holtmann.org>.
JUNE 6, 2003 CIPTOOL(1)
I have a DS25 and when i run "show device" don't appear my 'dka.....' and 'dkb....' devices, but i know they must be there, where could be the error? what can i do to see them?
I'm using Tru64
PD: Im so sorry if i repeat this Q but i really need an answer and i dunno where to ask... (6 Replies)
I have a DS25 and when i run "show device" don't appear my 'dka.....' and 'dkb....' devices, but i know they must be there, where could be the error? what can i do to see them? (3 Replies)
Dear All,
I'm new in unix and I want to know how we connect unix to other system device (exp. Telecom device) and how to get data from that device (real time data), any script for that??
Maybe any one have knowladge about this ..
thank you
Best Regards,
Heru (3 Replies)
Hi @all,
i am currently having a Problem:
I want to restart 2 USB Bluetooth Dongles from the shell at the same time. It is very important that they are restarted nearly simultaneously, so that their clocks are starting to run at the same time.
At the moment i am using a command called... (3 Replies)
I'm trying to connect a few servers in different remote locations to my HMC. I added static IPs to the Service Processor through ASM, and did all the necessary network configurations, then connected those servers to our switch. Now my questions are:
- in our site, do I need to connect these... (4 Replies)
Hello,
I am using the termios library to write data that I get from a Bluetooth device to a modem via serial.
The data arrive from the Bluetooth device correctly every 50ms and I have to bypass them on the serial ttyUSB3 where it is connected to a modem connected to a socket with static IP.
The... (10 Replies)
Hi all,
I am working on a project, in which I have to connect to Bluetooth low energy device. I am able to connect and do data transfer from command line. But I want to do from script
Here is my script
#!/bin/bash
#sudo hcitool -i hci0 lescan
sleep 1
sudo hcitool -i hci0 lecc --random... (8 Replies)
I have a bluetooth device, and when i search for a device it doesnt show anything,i have downloaded bluman blueberry bluedevil bluez but nothng worked,im using linux mint 18.2. (2 Replies)