Linux and UNIX Man Pages

Linux & Unix Commands - Search Man Pages

adpu320(7d) [sunos man page]

adpu320(7D)							      Devices							       adpu320(7D)

NAME
adpu320 - Adaptec Ultra320 SCSI host bus adapter driver SYNOPSIS
scsi@unit-address DESCRIPTION
The adpu320 host bus adapter driver is a SCSA-compliant nexus driver that supports the following Adaptec Ultra320 SCSI Devices: Chips AIC-7902 The adpu320 driver supports standard functions provided by the SCSA interface, including tagged and untagged queuing, Wide/Fast/Ultra SCSI, and auto request sense. The adpu320 driver does not support linked commands. The adpu320 driver supports hot swap SCSI and hot plug PCI. Additionally, the adpu320 driver supports the following features: o 64-bit addressing (Dual address Cycle) o PCI-X v1.1 operating up to 133MHz and 64bits o PCI bus spec v2.2 operating up to 66MHz and 64bits o Packetized SCSI at 320 and 160 MB/s o QAS o DT o 40MB/sec in single-ended mode and up to 320MB/sec transfer rate in LVD mode o Domain Validation o Retained Training Information (RTI) o PCI and PCI-X Error handling Driver Configuration The adpu320 host bus adapter driver is configured by defining the properties found in adpu320.conf. Properties in the adpu320.conf file that can be modified by the user include: ADPU320_SCSI_RD_STRM, ADPU320_SCSI_NLUN_SUPPORT. ------------------------------------------------------------- Option: ADPU320_SCSI_RD_STRM=[value] Definition: Enables/disables read streaming negotiation for all drives. Possible Values: 0 (off), 1 (on) Default Value: 0 (off) Option: ADPU320_SCSI_NLUN_SUPPORT=[value] Definition: Enables the number of logical units to be scanned per drive. Possible Values: 1-64 Default Value: 64 ------------------------------------------------------------- If you alter or add driver parameters incorrectly, you can render your system inoperable. Use driver parameters with caution. ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |x86 | +-----------------------------+-----------------------------+ FILES
/kernel/drv/adpu320 driver module /kernel/drv/amd64/adpu320 64-bit driver module /kernel/drv/adpu320.conf configuration file /boot/solaris/drivers/notisa.010/adpu320.bef realmode driver SEE ALSO
cfgadm(1M), prtconf(1M), attributes(5), scsi_abort(9F), scsi_hba_attach(9F), scsi_ifgetcap(9F), scsi_reset(9F), scsi_sync_pkt(9F), scsi_transport(9F), scsi_device(9S), scsi_extended_sense(9S), scsi_inquiry(9S), scsi_pkt(9S) Writing Device Drivers Small Computer System Interface-3 (SCSI-3) SunOS 5.10 19 Oct 2004 adpu320(7D)

Check Out this Related Man Page

qlc(7D) 																   qlc(7D)

NAME
qlc - ISP2200, ISP2300, and SP212 Family Fibre Channel host bus adapter driver. SYNOPSIS
SUNW,qlc The qlc host bus adapter driver is a Sun Fibre Channel transport layer-compliant nexus driver for the Qlogic ISP2200, ISP2200A, ISP2310, ISP2312, and SP212 adapters. These adapters support Fibre Channel SCSI and IP Protocols, FC-AL public loop profile, point-to-point fab- ric connection and Fibre Channel service classes two and three (see NOTES section below). The qlc driver interfaces with the Sun Fibre Channel transport layer to support the standard functions provided by the SCSA interface. It supports auto request sense and tagged queueing by default. The driver requires that all devices have unique hard addresses in private loop configurations. Devices with conflicting hard addresses are not accessible. /kernel/drv/qlc 32-bit ELF kernel module () /kernel/drv/amd64/qlc 64-bit ELF kernel module () /kernel/drv/sparcv9/qlc 64-bit ELF kernel module (SPARC) /kernel/drv/qlc.conf Driver configuration file See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Architecture |SPARC, | +-----------------------------+-----------------------------+ |Availability |SUNWqlc | +-----------------------------+-----------------------------+ prtconf(1M), driver.conf(4), fcp(7D), fp(7D) Writing Device Drivers ANSI X3.230:1994, Fibre Channel Physical Signaling (FC-PH) Project 1134-D, Fibre Channel Generic Services (FC-GS-2) ANSI X3.269-1996, Fibre Channel Arbitrated Loop (FC-AL) ANSI X3.270-1996, Fibre Channel Protocol for SCSI (FCP-SCSI) ANSI X3.270-1996, SCSI-3 Architecture Model (SAM) Fibre Channel Private Loop SCSI Direct Attach (FC-PLDA) Fabric Loop Attachment (FC-FLA) ISP2200 Firmware Interface Specification, QLogic Corporation ISP2300 Series Firmware Specification, QLogic Corporation NOTES
SP-212-based host bus adapters (including QLA-210) are supported on x86 platforms only and are limited to a maximum of 8 targets in fab- ric and sixteen targets in local loop topology. FL topology is not supported with the SP-212-based host bus adapter. 21 Feb 20054 qlc(7D)
Man Page